968 resultados para Residue lignocellulosic
Resumo:
Metal-semiconductor-metal (MSM) structures were fabricated by RF-plasma-assisted MBE using different buffer layer structures. One type of buffer structure consists of an AlN high-temperature buffer layer (HTBL) and a GaN intermediate temperature buffer layer (ITBL), another buffer structure consists of just a single A IN HTBL. Systematic measurements in the flicker noise and deep level transient Fourier spectroscopy (DLTFS) measurements were used to characterize the defect properties in the films. Both the noise and DLTFS measurements indicate improved properties for devices fabricated with the use of ITBL and is attributed to the relaxation of residue strain in the epitaxial layer during growth process. (C) 2003 Elsevier Ltd. All rights reserved.
Resumo:
The RSA-based Password-Authenticated Key Exchange (PAKE) protocols have been proposed to realize both mutual authentication and generation of secure session keys where a client is sharing his/her password only with a server and the latter should generate its RSA public/private key pair (e, n), (d, n) every time due to the lack of PKI (Public-Key Infrastructures). One of the ways to avoid a special kind of off-line (so called e-residue) attacks in the RSA-based PAKE protocols is to deploy a challenge/response method by which a client verifies the relative primality of e and φ(n) interactively with a server. However, this kind of RSA-based PAKE protocols did not give any proof of the underlying challenge/response method and therefore could not specify the exact complexity of their protocols since there exists another security parameter, needed in the challenge/response method. In this paper, we first present an RSA-based PAKE (RSA-PAKE) protocol that can deploy two different challenge/response methods (denoted by Challenge/Response Method1 and Challenge/Response Method2). The main contributions of this work include: (1) Based on the number theory, we prove that the Challenge/Response Method1 and the Challenge/Response Method2 are secure against e-residue attacks for any odd prime e; (2) With the security parameter for the on-line attacks, we show that the RSA-PAKE protocol is provably secure in the random oracle model where all of the off-line attacks are not more efficient than on-line dictionary attacks; and (3) By considering the Hamming weight of e and its complexity in the RSA-PAKE protocol, we search for primes to be recommended for a practical use. We also compare the RSA-PAKE protocol with the previous ones mainly in terms of computation and communication complexities.
Resumo:
酸化油是油脂工业中以皂脚、油脚经酸化处理得到的产品。它的主要成分是游离脂肪酸及中性油,是生产脂肪酸的重要原料,但生产过程中有水解废水的产生,若将其直接排放,既污染了环境又浪费了资源。生物柴油的主要成分是脂肪酸甲酯(fatty acid methyl ester,FAME)。它具有原料丰富而且可再生、可生物降解、无毒、不含芳香烃、二氧化硫等污染物、燃烧排放低、闪点高、运输储存安全等特点。作为石化柴油的潜在替代能源,生物柴油因其独特的优越性和现实的需求越来越受到关注。利用酸化油生产生物柴油不仅可以缓解生物柴油原料不足问题,还可解决酸化油所带来的环境问题。
The convertion of acid oil to biodiesel by use of immobilized Candida lipase absorbed on textile cloth was studied in a fixed bed reactor, which can not only reduce the environmental pollution of acid oil, but also produce a substitute for petroleum diesel. The acid oil mixed with methanol was pumped into three fixed bed reactors in series, and the methanol was added with the molar flow rate same as the acid oil in each reactor. The effects of enzyme content, solvent content, water content, flow rate of reactant and temperature on the enzymatic reaction were analyzed. The result of orthogonal experiments indicates that the optimal transesterification can be performed under the following conditions: immobilized lipase content in acid oil, 20% ; hexane content in acid oil, 10% ; water content in acid oil, 10%, reaction temperature, 50 ℃ ; and flow rate of reactant, 0.08 g/rain. Under these conditions, the FAME content of 90.18% in the product is obtained. The immobilized lipase can be reused with relatively stable activity after glycerol being removed from the surface. By refining, most of the chemical and physical properties of biodiesel will meet the American and Germany biodiesel standards and exceed the Chinese standard of 0^# petroleum diesel except for carbon residue, density and kinematic viscosity.
Resumo:
Waste cooking oil (WCO) is the residue from the kitchen, restaurants, food factories and even human and animal waste which not only harm people's health but also causes environmental pollution. The production of biodiesel from waste cooking oil to partially substitute petroleum diesel is one of the measures for solving the twin problems of environment pollution and energy shortage. In this project, synthesis of biodiesel was catalyzed by immobilized Candida lipase in a three-step fixed bed reactor. The reaction solution was a mixture of WCO, water, methanol and solvent (hexane). The main product was biodiesel consisted of fatty acid methyl ester (FAME), of which methyl oleate was the main component. Effects of lipase, solvent, water, and temperature and flow of the reaction mixture on the synthesis of biodiesel were analyzed. The results indicate that a 91.08% of FAME can be achieved in the end product under optimal conditions. Most of the chemical and physical characters of the biodiesel were superior to the standards for 0(#)diesel (GB/T 19147) and biodiesel (DIN V51606 and ASTM D-6751).
Resumo:
弃土弃渣是工程建设产生的最主要地面组成物质之一。采用野外放水冲刷试验方法,对黄河班多水电站工程区弃土弃渣水土流失过程进行了研究。(1)不同供水流量下,产流率随供水过程的动态变化整体呈增长趋势,可用幂函数方程描述,开始产流后的5 min内产流过程的变化幅度较大,随后较为平缓,并趋于基本稳定;(2)不同供水流量下,产沙率随供水历时的增长而减少,可用对数相关方程描述,小流量下变化过程波动较小,大流量下变化幅度较大;(3)不同供水流量下,含沙量随着供水历时的增长而减少,可用对数相关方程描述。各流量下的变化趋势基本一致;(4)次产流深、次产沙模数皆随供水流量的增大而增加,增加趋势基本相同,皆可用对数相关方程描述。平均含沙量随供水流量的增大先增加后减小,临界值为7.17 L/min,可用抛物线相关方程描述;(5)次产沙模数随次产流深的增大而增加,表现为很好的正相关关系,可用对数相关方程来描述。
Resumo:
研究食品加工剩余物板栗壳对水中Cu2+的吸附性能,为其用于含铜废水的处理提供理论依据。【方法】研究吸附质溶液pH、Cu2+质量浓度、吸附剂用量、粒径、吸附温度和时间对板栗壳吸附Cu2+效果的影响,探讨吸剂和吸附剂循环利用次数对解吸和再生的影响;并采用穿透曲线和洗脱曲线对动态吸附进行了分析。【结果】吸附质溶液pH值为6、Cu2+起始质量浓度为20 mg/L、吸附剂粒径为0.25 mm时的吸附效果较好,该吸附为放热过程,升高温度虽然可以加快吸附进程,但却降低了吸附量和去除率。Na+和Ca2+对Cu2+的解吸置换能力较弱,0.1mol/L HCl可使96.1%的Cu2+得以解吸回收。通过Thomas模型预测,在固定床柱吸附条件下饱和吸附量为10.94mg/g。【结论】板栗壳对水中Cu2+的吸附性能较好,因而具有很好的应用前景。
Resumo:
以黄土高原南部半湿润易旱区已进行17年的田间定位试验为研究对象,研究了不同培肥措施(不施肥、施用氮磷钾及氮磷钾与有机肥配合施用)下两种种植制度(一年1熟及一年两熟)和撂荒对土壤微生物量碳、氮(SMBC、SMBN)及可溶性有机碳、氮(SOC、SON)等含量的影响。结果表明,与一年1熟的小麦-休闲种植制度相比,一年两熟小麦-玉米轮作提高了0~10cm土层SMBC、SMBN、有机碳(TOC)、全氮(TN)和土壤SOC、SON的含量,而对10~20cm土层上述测定指标影响不大。与不施肥(CK)或单施化肥处理(NPK)下小麦-休闲和小麦-玉米轮作方式相比,撂荒处理显著提高了0~10cm土层各测定指标的含量。不同培肥措施相比,氮磷钾配施有机肥显著提高了0~10cm、10~20cm土层SMBC、SMBN含量;NPK处理0~10cm土层SMBN含量显著增加,10~20cm土层SMBN和0~10cm、10~20cm土层SMBC含量增加但未达显著水平。不同培肥措施和种植制度对SMBC/TOC和SMBN/TN的比例无明显影响。
Resumo:
Maize ribosome-inactivating protein (RIP) is a plant toxin that inactivates eukaryotic ribosomes by depurinating a specific adenine residue at the a-sarcin/ricin loop of 28S rRNA. Maize RIP is first produced as a proenzyme with a 25-amino acid internal inactivation region on the protein surface. During germination, proteolytic removal of this internal inactivation region generates the active heterodimeric maize RIP with full N-glycosidase activity. This naturally occurring switch-on mechanism provides an opportunity for targeting the cytotoxin to pathogen-infected cells. Here, we report the addition of HIV-1 protease recognition sequences to the internal inactivation region and the activation of the maize RIP variants by HIV-1 protease in vitro and in HIV-infected cells. Among the variants generated, two were cleaved efficiently by HIV-1 protease. The HIV-1 protease-activated variants showed enhanced N-glycosidase activity in vivo as compared to their un-activated counterparts. They also possessed potent inhibitory effect on p24 antigen production in human T cells infected by two HIV-1 strains. This switch-on strategy for activating the enzymatic activity of maize RIP in target cells provides a platform for combating pathogens with a specific protease.
Resumo:
Metal-semiconductor-metal (MSM) structures were fabricated by RF-plasma-assisted MBE using different buffer layer structures. One type of buffer structure consists of an AlN high-temperature buffer layer (HTBL) and a GaN intermediate temperature buffer layer (ITBL), another buffer structure consists of just a single A IN HTBL. Systematic measurements in the flicker noise and deep level transient Fourier spectroscopy (DLTFS) measurements were used to characterize the defect properties in the films. Both the noise and DLTFS measurements indicate improved properties for devices fabricated with the use of ITBL and is attributed to the relaxation of residue strain in the epitaxial layer during growth process. (C) 2003 Elsevier Ltd. All rights reserved.