A cinza dos myrtos : poemas /

Mode of access: Internet.

Sermões do doutor Francisco Fernandes Galvam ... Primeira Parte ... : Que começa de quarta feira de Cinza ate a primeira oitaua de Pascoa ... /

Mode of access: Internet.

Gestão pública de resíduos sólidos urbanos na região do grande ABC

Este artigo traz os resultados de uma pesquisa descritiva realizada na Região do Grande ABC, e ele se justifica em virtude da responsabilidade do poder público no tocante à gestão dos Resíduos Sólidos Urbanos (RSU), especialmente a partir da Lei nº 12.305/2010, a Política Nacional de Resíduos Sólidos. Objetivou-se descrever e comparar as práticas de gestão dos RSU adotadas pelas sete prefeituras dos municípios que integram a região. Foram realizadas 17 entrevistas com pessoas do poder público e cooperativas envolvidas com a gestão dos resíduos. Os dados foram analisados por análise de conteúdo. Concluímos que a coleta seletiva caminha a passos lentos na maioria dos municípios, no tocante à implementação e institucionalização. Os representantes das cooperativas manifestaram que a dependência do poder público e a mudança de governos interferem diretamente no desempenho da coleta seletiva, pois precisam se adequar a cada troca de governo, podendo provocar descontinuidades ou paralisações.

Gestão de resíduos sólidos em universidade: um estudo a partir da política nacional de resíduos sólidos.

A existência de problemas ambientais em função do acelerado processo de mudanças pelo qual o planeta passa, traz consigo uma preocupação mais acentuada com o meio ambiente, principalmente no que tange a sua degradação. Este artigo tem o propósito de analisar como a Universidade ALFA (nome fictício) está gerindo seus resíduos sólidos e de que forma estão se adequando para atender a Política Nacional de Resíduos Sólidos, bem como: identificar os tipos de resíduos gerados na Universidade ALFA; classificar os resíduos identificados; e verificar a destinação dada aos resíduos em uma universidade, comparando com a legislação sobre resíduos sólidos urbanos. A pesquisa caracteriza-se como sendo do tipo exploratória, utilizando-se do método de pesquisa-ação. Os resultados obtidos demonstram que as ações mais visíveis, servem de sensibilização da comunidade acadêmica, que já percebe mudanças, as quais vão ao encontro da gestão ambiental na instituição, que segue visa a perfeita adequação à legislação.

Política Nacional de Resíduos Sólidos: perspectivas de cumprimento da lei 12.305/2010 pelos municípios brasileiros, paulistas e da região do ABC.

A Política Nacional de Resíduos Sólidos, instituída pela Lei n.º 12.305/2010, determinou que os municípios brasileiros elaborassem e entregassem seus respectivos Planos de Gerenciamento de Resíduos Sólidos até 2012, impondo a erradicação dos “chamados” lixões até o ano de 2014. A referida lei estabelece responsabilidade compartilhada durante o ciclo de vida do produto (produção, comercialização, consumo e destino das embalagens). O Censo IBGE 2011 e pesquisas posteriores, embora fragmentadas, mostraram uma situação complexa e com baixa probabilidade de cumprimento das exigências no prazo estabelecido. Observa-se no cenário nacional a existência de programas iniciados e interrompidos devido à falta de educação ambiental, à ineficiência das campanhas de conscientização, à dificuldade de aceitação da norma pela comunidade e, tendo sido implantada a coleta seletiva, à falta de locais apropriados para triagem e estocagem. Nesse contexto, este artigo, a partir de uma pesquisa exploratória, bibliográfica e documental, analisou o quadro atual dos municípios brasileiros e, em especial, as políticas adotadas no Estado de São Paulo, com destaque para três municípios da região do Grande ABC. Constatou-se, a partir dos dados apresentados, uma grande distância a ser percorrida para o atendimento dos principais quesitos da Política Nacional de Resíduos Sólidos.

Avaliação da influência de cinza da casca de arroz em cimentos para poços de petróleo submetidos à injeção de vapor

Reservoirs that present highly viscous oils require methods to aid in their recovery to the surface. The elev ated oil viscosity hinders its flow through porous media and conventional recovery methods have not obtained significant efficiency. As such, the injection of steam into the reservoir through an injection well has been the most widely used method of therma l recovery, for it allows elevated volumes of recovery due to the viscosity reduction of the oil, facilitating the oil’s mobility within the rock formation and consequently into the production well where it will be exploited. On the other hand, the injecti on of vapor not only affects the fluids found in the rock pores, but the entire structure that composes the well where it is injected due to the high temperatures used in the process. This temperature increment is conducted to the cement, found in the annu lus, responsible for the isolation of the well and the well casing. Temperatures above 110 ̊C create new fazes rich in calcium in the cement matrix, resulting in the reduction of its permeability and the consequential phenomenon of mechanical resistance ret rogression. These alterations generate faults in the cement, reducing the well’s hydraulic isolation, creating insecurity in the operations in which the well will be submitted as well as the reduction of its economic life span. As a way of reducing this re trograde effect, this study has the objective of evaluating the incorporation of rice husk ash as a mineral additive substitute of silica flour , commercially utilized as a source of silica to reduce the CaO/SiO 2 ratio in the cement pastes submitted to high temperatures in thermal recovery. Cement pastes were formulated containing 20 and 30% levels of ash, apart from the basic paste (water + cement) and a reference paste (water + cement + 40% silica flour) for comparison purposes. The tests were executed th rough compression resistance tests, X - Ray diffraction (XRD) techniques, thermogravimetry (TG), scanning electron microscopy (SEM) and chemical anal ysis BY X - ray fluorescence (EDS) on the pastes submitted to cure at low temperatures (45 ̊C) for 28 days following a cure at 280 ̊C and a pressure of 2,000 PSI for 3 days, simulating vapor injection. The results obtained show that the paste containing 30% r ice shell ash is satisfactory, obtaining mechanical resistance desired and equivalent to that of the paste containing 40% silica flour, since the products obtained were hydrated with low CaO/SiO 2 ratio, like the Tobermorita and Xonotlita fases, proving its applicability in well subject to vapor injection.

Método híbrido para detecção e diagnóstico de falhas baseado em resíduos

The detection and diagnosis of faults, ie., find out how , where and why failures occur is an important area of study since man came to be replaced by machines. However, no technique studied to date can solve definitively the problem. Differences in dynamic systems, whether linear, nonlinear, variant or invariant in time, with physical or analytical redundancy, hamper research in order to obtain a unique solution . In this paper, a technique for fault detection and diagnosis (FDD) will be presented in dynamic systems using state observers in conjunction with other tools in order to create a hybrid FDD. A modified state observer is used to create a residue that allows also the detection and diagnosis of faults. A bank of faults signatures will be created using statistical tools and finally an approach using mean squared error ( MSE ) will assist in the study of the behavior of fault diagnosis even in the presence of noise . This methodology is then applied to an educational plant with coupled tanks and other with industrial instrumentation to validate the system.

Qualidade do solo da camada de cobertura final em área de disposição de resíduos no semiárido tropical

The final disposal of municipal solid waste in unsuitable areas without an infrastructure that meets the health measures and environmental protection, coupled with the lack of technical criteria in phase and decommissioning of the dump can promote environmental degradation. Alternatively to minimize the impacts of this activity for the stabilization of the area by isolating the massive waste with implementation of an adequate and finished by a layer of soil for plant growth final cover system. In this context, the present study aimed to evaluate the quality of the final cover in the area of a disabled dump the tropical semi-arid region in order to assist the process of recovery of these areas. The study area is located in the tropical semi-arid region in São João do Sabugi /RN. Soil samples were collected in the dump area and bushland as a benchmark of quality. To which they were subjected to analysis of physical attributes (particle density, bulk density, grain size and porosity), chemical properties (pH, K + , Na+ , Ca2 + , Mg2 + and Al3 + exchangeable, potential acidity, available phosphorus, sum of bases, CEC, base saturation, aluminum saturation, saturation Na + and adsorption ratio sodium, total organic carbon and total nitrogen) and total and soluble concentrations of heavy metals (Mn, Pb, Zn, Cd, Cu, Mo, Co, Cr, Ba and Ni). The differences between physical and chemical soil under native forest and final cover showing reduction of soil quality in the area off to the dump, which hinders the development of native vegetation and the recovery of the area. The absence of superior waterproofing to allow vertical transfer between the solid waste and the final cover promoted enrichment by chemical elements and heavy metals in excess can impair revegetation. Deficiencies found in the construction process of the final cover point to the need for intervention to accelerate the process of stabilization and recovery of the area of the local ecosystem

Comportamento geotécnico de misturas de solo e resíduos de perfuração onshore

The drilling of wells for petroleum extraction generates rocks and soils fragments, among other residues. These fragments are denominated petroleum drilling gravel or simply petroleum drilling residue. On the sites of onshore exploration are formed big deposits of drilling gravel, an expensive final destination material. This work aims at evaluating the addition of drilling residue to a lateritic soil, as composite material, for construction of compacted fills for earth work projects. Soil and residue were evaluated by X-ray diffraction (XRD) and X-ray fluorescence (XRF) and by laboratory tests traditionally used in soil mechanics, as particle-size analysis of soils, determination of liquid and plasticity indexes and compaction test. After soil and residue characterization, soil-residue mixtures were studied, using dosages of 2,5%, 5%, 10%, and 15% of residue in relation to the dry soil mass. These mixtures were submitted to compaction test, CBR, direct shear test and consolidation test. The test results were compared to the current legislation of DNIT for compacted fill construction. The results showed that the mixtures presented the minimal necessary parameters, allowing, from the point of view of geotechnical analysis, the use of these mixtures for construction of compacted fills

Otimização do sistema de supervisão e controle de uma planta de tratamento de resíduos utilizando plasma

A major and growing problems faced by modern society is the high production of waste and related effects they produce, such as environmental degradation and pollution of various ecosystems, with direct effects on quality of life. The thermal treatment technologies have been widely used in the treatment of these wastes and thermal plasma is gaining importance in processing blanketing. This work is focused on developing an optimized system of supervision and control applied to a processing plant and petrochemical waste effluents using thermal plasma. The system is basically composed of a inductive plasma torch reactors washing system / exhaust gases and RF power used to generate plasma. The process of supervision and control of the plant is of paramount importance in the development of the ultimate goal. For this reason, various subsidies were created in the search for greater efficiency in the process, generating events, graphics / distribution and storage of data for each subsystem of the plant, process execution, control and 3D visualization of each subsystem of the plant between others. A communication platform between the virtual 3D plant architecture and a real control structure (hardware) was created. The goal is to use the concepts of mixed reality and develop strategies for different types of controls that allow manipulating 3D plant without restrictions and schedules, optimize the actual process. Studies have shown that one of the best ways to implement the control of generation inductively coupled plasma techniques is to use intelligent control, both for their efficiency in the results is low for its implementation, without requiring a specific model. The control strategy using Fuzzy Logic (Fuzzy-PI) was developed and implemented, and the results showed satisfactory condition on response time and viability

Estudo da incorporação de resíduos de perfuração para aplicação em cimentação de poços de petróleo

During the drilling of oil and natural gas are generated solid waste, liquid and gaseous. These solid fragments, which are known as cuttings, are carried to the surface through the drilling fluid. Furthermore, this fluid serves to cool the bit, keeping the internal pressure of the well, and others. This solid residue is very polluting, because it has incorporated beyond the drilling fluid, which has several chemical additives harmful to the environment, some heavy metals that are harmful to the environment, such as lead. To minimize the residue generated, are currently being studied numerous techniques to mitigate the problems that such waste can cause to the environment, like addition of cuttings in the composition of soil cement brick masonry construction, addition of cuttings on the clay matrix for the manufacture of solid masonry bricks and ceramic blocks and coprocessing of the cuttings in cement. So, the main objective of this work is the incorporation of cuttings drilling of oil wells, the cement slurry used in the cementing operation of the well. This cuttings used in this study, arising from the formation Pendências, was milled and separated in a sieve of 100 mesh. After grinding had a mean particle sike in order of 86 mm and crystal structure containing phases of quartz and calcite type, characteristic of the Portland cement. Were formulated and prepared slurries of cement with density 13 lb / gal, containing different concentrations of gravel, and realized characterization tests API SPEC 10A and RP 10B. Free water tests showed values lower than 5.9% and the rheological model that best described the behavior of the mixtures was the power. The results of compressive strength (10.3 MPa) and stability (Dr <0.5 lb / gal) had values within the set of operational procedures. Thus, the gravel from the drilling operation, may be used as binders in addition to Portland cement oil wells, in order to reuse this waste and reduce the cost of the cement paste.

A plasticidade acústica de uma população de Boto - Cinza, Sotalia Guianensis (Van Banédén, 1864) (Cetacea, Delphinidae), na região Nordeste do Brasil

The environmental characteristics can modify the acoustics of a species due to habitat, time of day and year. Therefore, this study investigated the relationships between seasons, tide, daily cycle of tides, times of day and different habitat and noise emission of S. guianensis. Sound recordings occurred in the Curral’s Cove and Lagoon Complex of Guaraíras (CLG) in the municipality of Tibau do Sul/RN. Whistles are emitted with lower frequency during rainy season and spring tide while clicks are higher; whistles, clicks and calls have higher frequency during ebb tide. These modifications can be related with turbidity and prey availability. The whistles and clicks occurrence are higher at night probably because luminosity is lower. Furthermore, the whistles and clicks frequency reduction overnight allows the sound to travel longer distance and helps the view which is limited; but the minimum frequency increase was needed to catch the prey. The low occurrence of calls could be related to the small group size. The acoustic changes at night may be partly influenced by light levels as prey availability that is larger in this period. Whistle frequencies and click initial frequency are higher in CLG than Curral’s cove that permitted good precision. However, click central frequency is lower and may be connected to tracking the area. Several factors may be associated with such modifications as background noise, bottom and others. This study supports the hypothesis that S. guianensis presents an acoustic plasticity according to the local conditions where the species is embedded and adapts to the environmental changes.