The active site behaviour of electrochemically synthesised gold nanomaterials

Even though gold is the noblest of metals, a weak chemisorber and is regarded as being quite inert, it demonstrates significant electrocatalytic activity in its nanostructured form. It is demonstrated here that nanostructured and even evaporated thin films of gold are covered with active sites which are responsible for such activity. The identification of these sites is demonstrated with conventional electrochemical techniques such as cyclic voltammetry as well as a large amplitude Fourier transformed alternating current (FT-ac) method under acidic and alkaline conditions. The latter technique is beneficial in determining if an electrode process is either Faradaic or capacitive in nature. The observed behaviour is analogous to that observed for activated gold electrodes whose surfaces have been severely disrupted by cathodic polarisation in the hydrogen evolution region. It is shown that significant electrochemical oxidation responses occur at discrete potential values well below that for the formation of the compact monolayer oxide of bulk gold and are attributed to the facile oxidation of surface active sites. Several electrocatalytic reactions are explored in which the onset potential is determined by the presence of such sites on the surface. Significantly, the facile oxidation of active sites is used to drive the electroless deposition of metals such as platinum, palladium and silver from their aqueous salts on the surface of gold nanostructures. The resultant surface decoration of gold with secondary metal nanoparticles not only indicates regions on the surface which are rich in active sites but also provides a method to form interesting bimetallic surfaces.

Large amplitude Fourier transformed AC voltammetric investigation of the active state electrochemistry of a copper/aqueous base interface and implications for electrocatalysis

The higher harmonic components available from large-amplitude Fourier-transformed alternating current (FT-ac) voltammetry enable the surface active state of a copper electrode in basic media to be probed in much more detail than possible with previously used dc methods. In particular, the absence of capacitance background current allows low-level Faradaic current contributions of fast electron-transfer processes to be detected; these are usually completely undetectable under conditions of dc cyclic voltammetry. Under high harmonic FT-ac voltammetric conditions, copper electrodes exhibit well-defined and reversible premonolayer oxidation responses at potentials within the double layer region in basic 1.0 M NaOH media. This process is attributed to oxidation of copper adatoms (Cu*) of low bulk metal lattice coordination numbers to surface-bonded, reactive hydrated oxide species. Of further interest is the observation that cathodic polarization in 1.0 M NaOH significantly enhances the current detected in each of the fundamental to sixth FT-ac harmonic components in the Cu*/Cu hydrous oxide electron-transfer process which enables the underlying electron transfer processes in the higher harmonics to be studied under conditions where the dc capacitance response is suppressed; the results support the incipient hydrous oxide adatom mediator (IHOAM) model of electrocatalysis. The underlying quasi-reversible interfacial Cu*/Cu hydrous oxide process present under these conditions is shown to mediate the reduction of nitrate at a copper electrode, while the mediator for the hydrazine oxidation reaction appears to involve a different mediator or active state redox couple. Use of FT-ac voltammetry offers prospects for new insights into the nature of active sites and electrocatalysis at the electrode/solution interface of Group 11 metals in aqueous media.

Power profiles of multifocal contact lenses and their interpretation

Purpose Many contact lens (CL) manufacturers produce simultaneous-image lenses in which power varies either smoothly or discontinuously with zonal radius. We present in vitro measurements of some recent CLs and discuss how power profiles might be approximated in terms of nominal distance corrections, near additions, and on-eye visual performance. Methods Fully hydrated soft, simultaneous-image CLs from four manufacturers (Air Optix AQUA, Alcon; PureVision multifocal, Bausch & Lomb; Acuvue OASYS for Presbyopia, Vistakon; Biofinity multifocal- ‘‘D’’ design, Cooper Vision) were measured with a Phase focus Lens Profiler (Phase Focus Ltd., Sheffield,UK) in a wet cell and powerswere corrected to powers in air. All lenses had zero labeled power for distance. Results Sagittal power profiles revealed that the ‘‘low’’ add PureVision and Air Optix lenses exhibit smooth (parabolic) profiles, corresponding to negative spherical aberration. The ‘‘mid’’ and ‘‘high’’ add PureVision and Air Optix lenses have biaspheric designs, leading to different rates of power change for the central and peripheral portions. All OASYS lenses display a series of concentric zones, separated by abrupt discontinuities; individual profiles can be constrained between two parabolically decreasing curves, each giving a valid description of the power changes over alternate annular zones. Biofinity lenses have constant power over the central circular region of radius 1.5 mm, followed by an annular zone where the power increases approximately linearly, the gradient increasing with the add power, and finally an outer zone showing a slow, linear increase in power with a gradient being almost independent of the add power. Conclusions The variation in power across the simultaneous-image lenses produces enhanced depth of focus. The throughfocusnature of the image, which influences the ‘‘best focus’’ (distance correction) and the reading addition, will vary with several factors, including lens centration, the wearer’s pupil diameter, and ocular aberrations, particularly spherical aberration; visual performance with some designs may show greater sensitivity to these factors.

Impacts of different wind power generators on power system small signal and transient stability

With the ever-increasing penetration level of wind power, the impacts of wind power on the power system are becoming more and more significant. Hence, it is necessary to systematically examine its impacts on the small signal stability and transient stability in order to find out countermeasures. As such, a comprehensive study is carried out to compare the dynamic performances of power system respectively with three widely-used power generators. First, the dynamic models are described for three types of wind power generators, i. e. the squirrel cage induction generator (SCIG), doubly fed induction generator (DFIG) and permanent magnet generator (PMG). Then, the impacts of these wind power generators on the small signal stability and transient stability are compared with that of a substituted synchronous generator (SG) in the WSCC three-machine nine-bus system by the eigenvalue analysis and dynamic time-domain simulations. Simulation results show that the impacts of different wind power generators are different under small and large disturbances.

A distributed control based coordination scheme of household PV systems for overvoltage prevention

This paper presents a distributed communication based active power curtailment (APC) control scheme for grid connected photovoltaic (PV) systems to address voltage rise. A simple distribution feeder model is presented and simulated using MATLAB. The resource sharing based control scheme proposed is shown to be effective at reducing voltage rise during times of peak generation and low load. Simulations also show the even distribution of APC using simple communications. Simulations demonstrate the versatility of the proposed control method under major communication failure conditions. Further research may lead to possible applications in coordinated electric vehicle (EV) charging.

Investigation of the effects of various types of wind turbine generators on power-system stability

It has become more and more demanding to investigate the impacts of wind farms on power system operation as ever-increasing penetration levels of wind power have the potential to bring about a series of dynamic stability problems for power systems. This paper undertakes such an investigation through investigating the small signal and transient stabilities of power systems that are separately integrated with three types of wind turbine generators (WTGs), namely the squirrel cage induction generator (SCIG), the doubly fed induction generator (DFIG), and the permanent magnet generator (PMG). To examine the effects of these WTGs on a power system with regard to its stability under different operating conditions, a selected synchronous generator (SG) of the well-known Western Electricity Coordinating Council (WECC three-unit nine-bus system and an eight-unit 24-bus system is replaced in turn by each type of WTG with the same capacity. The performances of the power system in response to the disturbances are then systematically compared. Specifically, the following comparisons are undertaken: (1) performances of the power system before and after the integration of the WTGs; and (2) performances of the power system and the associated consequences when the SCIG, DFIG, or PMG are separately connected to the system. These stability case studies utilize both eigenvalue analysis and dynamic time-domain simulation methods.

Active awareness : supporting the intentional disclosure of awareness information in collaborative systems

This thesis opens up the design space for awareness research in CSCW and HCI. By challenging the prevalent understanding of roles in awareness processes and exploring different mechanisms for actively engaging users in the awareness process, this thesis provides a better understanding of the complexity of these processes and suggests practical solutions for designing and implementing systems that support active awareness. Mutual awareness, a prominent research topic in the fields of Computer-Supported Cooperative Work (CSCW) and Human-Computer Interaction (HCI) refers to a fundamental aspect of a person’s work: their ability to gain a better understanding of a situation by perceiving and interpreting their co-workers actions. Technologically-mediated awareness, used to support co-workers across distributed settings, distinguishes between the roles of the actor, whose actions are often limited to being the target of an automated data gathering processes, and the receiver, who wants to be made aware of the actors’ actions. This receiver-centric view of awareness, focusing on helping receivers to deal with complex sets of awareness information, stands in stark contrast to our understanding of awareness as social process involving complex interactions between both actors and receivers. It fails to take into account an actors’ intimate understanding of their own activities and the contribution that this subjective understanding could make in providing richer awareness information. In this thesis I challenge the prevalent receiver-centric notion of awareness, and explore the conceptual foundations, design, implementation and evaluation of an alternative active awareness approach by making the following five contributions. Firstly, I identify the limitations of existing awareness research and solicit further evidence to support the notion of active awareness. I analyse ethnographic workplace studies that demonstrate how actors engage in an intricate interplay involving the monitoring of their co-workers progress and displaying aspects of their activities that may be of relevance to others. The examination of a large body of awareness research reveals that while disclosing information is a common practice in face-to-face collaborative settings it has been neglected in implementations of technically mediated awareness. Based on these considerations, I introduce the notion of intentional disclosure to describe the action of users actively and deliberately contributing awareness information. I consider challenges and potential solutions for the design of active awareness. I compare a range of systems, each allowing users to share information about their activities at various levels of detail. I discuss one of the main challenges to active awareness: that disclosing information about activities requires some degree of effort. I discuss various representations of effort in collaborative work. These considerations reveal that there is a trade-off between the richness of awareness information and the effort required to provide this information. I propose a framework for active awareness, aimed to help designers to understand the scope and limitations of different types of intentional disclosure. I draw on the identified richness/effort trade-off to develop two types of intentional disclosure, both of which aim to facilitate the disclosure of information while reducing the effort required to do so. For both of these approaches, direct and indirect disclosure, I delineate how they differ from related approaches and define a set of design criteria that is intended to guide their implementation. I demonstrate how the framework of active awareness can be practically applied by building two proof-of-concept prototypes that implement direct and indirect disclosure respectively. AnyBiff, implementing direct disclosure, allows users to create, share and use shared representations of activities in order to express their current actions and intentions. SphereX, implementing indirect disclosure, represents shared areas of interests or working context, and links sets of activities to these representations. Lastly, I present the results of the qualitative evaluation of the two prototypes and analyse the results with regard to the extent to which they implemented their respective disclosure mechanisms and supported active awareness. Both systems were deployed and tested in real world environments. The results for AnyBiff showed that users developed a wide range of activity representations, some unanticipated, and actively used the system to disclose information. The results further highlighted a number of design considerations relating to the relationship between awareness and communication, and the role of ambiguity. The evaluation of SphereX validated the feasibility of the indirect disclosure approach. However, the study highlighted the challenges of implementing cross-application awareness support and translating the concept to users. The study resulted in design recommendations aimed to improve the implementation of future systems.

On power minimisation and SNR maximisation of distributed beamforming in cooperative communication systems

A comparison of relay power minimisation subject to received signal-to-noise ratio (SNR) at the receiver and SNR maximisation subject to the total transmitted power of relays for a typical wireless network with distributed beamforming is presented. It is desirable to maximise receiver quality-of-service (QoS) and also to minimise the cost of transmission in terms of power. Hence, these two optimisation problems are very common and have been addressed separately in the literature. It is shown that SNR maximisation subject to power constraint and power minimisation subject to SNR constraint yield the same results for a typical wireless network. It proves that either one of the optimisation approaches is sufficient.

Effects of a pediatric weight management program with and without active video games

Importance Active video games may offer an effective strategy to increase physical activity in overweight and obese children. However, the specific effects of active gaming when delivered within the context of a pediatric weight management program are unknown. Objective To evaluate the effects of active video gaming on physical activity and weight loss in children participating in an evidence-based weight management program delivered in the community. Design, Setting, and Participants Group-randomized clinical trial conducted during a 16-week period in YMCAs and schools located in Massachusetts, Rhode Island, and Texas. Seventy-five overweight or obese children (41 girls [55%], 34 whites [45%], 20 Hispanics [27%], and 17 blacks [23%]) enrolled in a community-based pediatric weight management program. Mean (SD) age of the participants was 10.0 (1.7) years; body mass index (BMI) z score, 2.15 (0.40); and percentage overweight from the median BMI for age and sex, 64.3% (19.9%). Interventions All participants received a comprehensive family-based pediatric weight management program (JOIN for ME). Participants in the program and active gaming group received hardware consisting of a game console and motion capture device and 1 active game at their second treatment session and a second game in week 9 of the program. Participants in the program-only group were given the hardware and 2 games at the completion of the 16-week program. Main Outcomes and Measures Objectively measured daily moderate-to-vigorous and vigorous physical activity, percentage overweight, and BMI z score. Results Participants in the program and active gaming group exhibited significant increases in moderate-to-vigorous (mean [SD], 7.4 [2.7] min/d) and vigorous (2.8 [0.9] min/d) physical activity at week 16 (P < .05). In the program-only group, a decline or no change was observed in the moderate-to-vigorous (mean [SD] net difference, 8.0 [3.8] min/d; P = .04) and vigorous (3.1 [1.3] min/d; P = .02) physical activity. Participants in both groups exhibited significant reductions in percentage overweight and BMI z scores at week 16. However, the program and active gaming group exhibited significantly greater reductions in percentage overweight (mean [SD], −10.9% [1.6%] vs −5.5% [1.5%]; P = .02) and BMI z score (−0.25 [0.03] vs −0.11 [0.03]; P < .001). Conclusions and Relevance Incorporating active video gaming into an evidence-based pediatric weight management program has positive effects on physical activity and relative weight.

Design of a least-cost battery-supercapacitor energy storage system for realizing dispatchable wind power

A statistical approach is used in the design of a battery-supercapacitor energy storage system for a wind farm. The design exploits the technical merits of the two energy storage mediums, in terms of the differences in their specific power and energy densities, and their ability to accommodate different rates of change in the charging/discharging powers. By treating the input wind power as random and using a proposed coordinated power flows control strategy for the battery and the supercapacitor, the approach evaluates the energy storage capacities, the corresponding expected life cycle cost/year of the storage mediums, and the expected cost/year of unmet power dispatch. A computational procedure is then developed for the design of a least-cost/year hybrid energy storage system to realize wind power dispatch at a specified confidence level.

Legislative impact on the mortgagee’s exercise of power of sale : the need for rationalisation

Throughout Australia, regulation of the power of sale is highly inconsistent. In response to the uncertain nature of the mortgagee’s duty at common law, many legislatures have intervened. As a result, there has been a proliferation of statutory formula conferring varying degrees of protection on mortgagors. The differences in approach indicate a lack of consensus as to the best method of regulation. This article exposes the extent of the inconsistency and provides a comparative assessment of the various provisions with reference to the policy concerns that underpin legislative intervention. The article identifies a number of deficiencies associated with existing provisions and concludes that mortgagees and mortgagors alike would benefit from improved clarity and consistency. To that end, the article proposes a model provision that seeks to address the deficiencies identified.

A novel matrix converter based resonant dual active bridge for V2G applications

Dual-active bridges (DABs) can be used to deliver isolated and bidirectional power to electric vehicles (EVs) or to the grid in vehicle-to-grid (V2G) applications. However, such a system essentially requires a two-stage power conversion process, which significantly increases the power losses. Furthermore, the poor power factor associated with DAB converters further reduces the efficiency of such systems. This paper proposes a novel matrix converter based resonant DAB converter that requires only a single-stage power conversion process to facilitate isolated bi-directional power transfer between EVs and the grid. The proposed converter comprises a matrix converter based front end linked with an EV side full-bridge converter through a high frequency isolation transformer and a tuned LCL network. A mathematical model, which predicts the behavior of the proposed system, is presented to show that both the magnitude and direction of the power flow can be controlled through either relative phase angle or magnitude modulation of voltages produced by converters. Viability of the proposed concept is verified through simulations. The proposed matrix converter based DAB, with a single power conversion stage, is low in cost, and suites charging and discharging in single or multiple EVs or V2G applications.

Doubly Fed Induction Generator for wind energy generation using nine-switch power converter

A Three-Phase Nine-Switch Converter (NSC) topology for Doubly Fed Induction Generator in wind energy generation is proposed in this paper. This converter topology was used in various applications such as Hybrid Electric Vehicles and Uninterruptable Power Supplies. In this paper, Nine-Switch Converter is introduced in Doubly Fed Induction Generator in renewable energy application for the first time. It replaces the conventional Back-to-Back Pulse Width Modulated voltage source converter (VSC) which composed of twelve switches in many DFIG applications. Reduction in number of switches is the most beneficial in terms of cost and power switching losses. The operation principle of Nine-Switch Converter using SPWM method is discussed. The resulting NSC performance of rotor side current control, active power and reactive control are compared with Back-to Back voltage source converter performance. DC link voltage regulation using front end converter is also presented. Finally the simulation results of DFIG performances using NSC and Back-to-Back VSC are analyzed and compared.

Design of a renewable - hybrid energy storage power scheme for short-term power dispatch

A hybrid energy storage system (HESS) consisting of battery and supercapacitor (SC) is proposed for use in a wind farm in order to achieve power dispatchability. In the designed scheme, the rate of charging/discharging powers of the battery is controlled while the faster wind power transients are diverted to the SC. This enhances the lifetime of the battery. Furthermore, by taking into consideration the random nature of the wind power, a statistical design method is developed to determine the capacities of the HESS needed to achieve specified confidence level in the power dispatch. The proposed approach is useful in the planning of the wind farm-HESS scheme and the coordination of the power flows between the battery and SC.

On the design of power buffer and its applications

A power electronics-based buffer is examined in which through control of its PWM converters, the buffer-load combination is driven to operate under either constant power or constant impedance modes. A battery, incorporated within the buffer, provides the energy storage facility to facilitate the necessary power flow control. Real power demand from upstream supply is regulated under fault condition, and the possibility of voltage or network instability is reduced. The proposed buffer is also applied to a wind farm. It is shown that the buffer stabilizes the power contribution from the farm. Based on a battery cost-benefit analysis, a method is developed to determine the optimal level of the power supplied from the wind farm and the corresponding capacity of the battery storage system.