Desenvolvimento de metodologia para a obtenção da cubicagem de madeira em toras empilhadas através de imagens digitais

Obtaining accurate estimates of the volume of stacked wood is important in view of the increasing value of wood as raw material. Therefore, the forest companies have become increasingly concerned about the methods currently used to convert cubic meters for stereo. In this context, emerged the need of optimizing the measurement process and accuracy of the volume of stacked wood. For this, companies have been testing methods with greater efficiency, speed and low operating cost. Existing methods made through approximate equations, and also by determining the conversion factor, called the stacking factor (Fe), are questioned, due to errors and inaccuracies. The use of digital photographs is an alternative method that would minimize operator intervention, allowing greater control and speed the process, thus eliminating part of the imprecision of the traditional method. The use of the method is viable, due to present an error of about 10% while traditional methods showed an error of 17%

Fractografia quantitativa: correlação entre dimensão fractal e tenacidade à fratura em compósitos fibra de carbono/epóxi

The fracture surfaces express the sequence of events of energy release due to crack propagation by linking the relief of the fracture to the loading stresses. This study aims to evaluate the heterogeneity of the critical zone for the advancement of the crack along its entire length in a thermoset composite carbon fiber and epoxy matrix, fractured in DCB testing (Double Cantilever Beam) and ENF (End-Notched Flexure). Investigations were made from image stacks obtained by optical reflection of extended depth from focus reconstruction. The program NIH Image J was used to obtain elevation map and fully focused images of the fracture surface, whose topographies were quantitatively analyzed. The monofractal behavior for DCB samples was assessed as being heterogeneous along the crack front and along the crack for all the conditionings. For the samples fractured in ENF test, there was a strong positive correlation to the natural condition, considering the fibers at 0° for the monofractal dimension and structural dimension (Df and Ds). For fibers at 90° to crack propagation, there was a moderate positive correlation for the textural dimension of natural condition. However, for the samples under ultraviolet condition and those subjected to thermal cycles, there was no correlation between the fractal dimension and fracture toughness in mode II

Avaliação do uso de fantomas antropomórficos na análise experimental dos fatores que afetam o contraste de imagens radiográficas

This experimental study aimed the evaluation of the use of anthropomorphic phantoms in the analysis of the influence of the acquisition parameters in the contrast of radiographic images. The analyzed factors were the variation of the peak kilovoltage (kVp) and the product of the filament circuit by the time of exposition (mAs). The influence of these factors was verified for different anthropomorphic phantoms: foot, knee and chest. The image contrast behavior with the simulators was compared to values obtained with the use of an aluminum ladder being the behavior of this reference for analysis and discussion. To assure the reproducibility of images, quality control tests were made and evaluation of procedure conditions before the experiments. The results obtained are shown in a scale of images where it was possible to evaluate the impact in the darkness of images. Regions with different compositions were analyzed which were different in image, this way the values of optical density and contrast are represented as charts and graphics. We conclude that the use of anthropomorphic phantoms in the evaluation of the influence of tension of the tube and time of exposition in the contrast of the radiographic images is not indicated for a quantitative analysis through optical density, once they present incompatible results with the data as reference as the aluminum ladder even so these simulators present a great property in qualitative analysis regarding the differentiation of structures and subjective evaluations

Quantificação da desintegração de comprimidos por fluxo ótico em seqüências de imagens de biosusceptometria AC

AC Biosusceptometry (ACB) is a low-cost biomagnetic tool that has been successfully applied on pharmaceutical research to evaluate performance of solid dosage forms. The aim of this work was to evaluate the Horn & Shunck method to access tablet disintegration. To evaluate the HS results was record on video a test with a objet moving in a rail with a constant velocity. The desintegration was recorded on video and ACB, which used have seven pairs of detection coils and a pair of excitation coils to mensure the magnetic ux variation. The signals were ampli ed and digitalized to create images, which were restored by Wiener lter, while the video images are converted to gray scale, both are normalized and binarized and had the optical ow estimation calculated by Horn & Schunck (HS) algorithm. All signals and images are processed and developed algorithm on Matlab. During the tests the ve tablets (500mg ferrite, 375mg excipients, compression 10 to 50 kN) were on a becker between of the ACB system and of the video system, and only touching the surface of the water. With all OF maps calculated was realized the sum of the resultants of each, to get a disintegration process resultant for each compression. Whit that was possible observed the disintegration behaves. For the compression force study the HS components of each sequence was sum, take mean and normalized for sequence's max modulo, therefore can be observed a high growing on less compression tablets. We can conclude the HS algorithm is viable to tablets disintegration data collection and whit that was possible to create a tablets disintegration analyzes protocol, which would be useful on desintegration kinetics study

Rebranding: propostas de estratégias para a reconstrução de marca no Centro Universitário da FEI

This paper relates the concepts of brand management in the educational context of Brazilian higher education to demonstrate how can we do a reconstruction and the importance of establishing a solid relationship with the public of an organization to become loyal to your brand . The reflections in this project seek to demonstrate how PR professionals can plan the reconstruction process of a brand. To achieve the ultimate goal of the project seeks to introduce the concepts of branding, PR and stakeholders in order to highlight the new challenges that organizations face today. To illustrate the concepts aborted, the procedures suggested for the reconstruction of a brand are used in the case study of the Centro Universitário da FEI. For this, it is a diagnosis of the organization and subsequently suggested a process for strategic rebrading, as well as the association of a brand management with public relations

Classificação da cobertura da terra da RPPN Foz do Rio Aguapeí: abordagem booleana para a integração de imagens TM-Landsat e dados multifonte

The Companhia Energetica de Sao Paulo - CESP owns six hydroelectric dams in the state of São Paulo. The dams, both in its construction and in operation, cause some environmental impacts, most of them negatives, for example, the flooding in regions before not flooded, deviation of the river’s course, among others, bringing harm to flora and fauna of these environments. As a way to compensating these damages, the CESP has acquired a region that was influenced by Sérgio Motta Hydroelectric Plant Engineer, or Porto Primavera, and turned it into Reserva Particular do Patrimônio Natural Foz do Rio Aguapeí. By law it fits in a Conservation Unit, and thus should be contemplate for a management plan, ie, a multidisciplinary technical document which allows, simply, the practice of actions within and around in a sustainably way. This work aimed at developing a land cover map of the reserve for this plan can be made and executed more efficiently. Initially, the project included field visits and meetings with members of the CESP to be specified classes contained on the map. Later, we ran different types of classifications of multispectral images (TM / Landsat 5)... (Complete abstract click electronic access below)

Sensibilização: experimentações com imagens manipuladas digitalmente

Based on sound and video synesthetic possibilities, we seek for the same possibilities on drawings and photographs by treating these in image editing softwares. The resulting montages of this final college work tend to manifest and evoke sensations in which all the human senses work as ways of understanding significations

Aprendizagem da língua inglesa a partir de imagens cinematográficas

Não disponível

Caracterização estrutural da porção central da Bacia de Santos e seu embasamento continental adjacente, através de interpretação de imagens de satélites e geofísicas

The Santos Basin is located in the Brazilian continental margin and includes the coast of Santa Catarina, Paraná, São Paulo and Rio de Janeiro states. Its northern limit is the Campos Basin through the High of Cabo Frio and the southern one with the Pelotas Basin through the Platform of Florianópolis, totaling an area of approximately 350,000 square kilometers in a water depth of 3,000 m. The Paranapanema Lineament has WNW / ESE direction, and extends from the area filled by the Paraná Basin, on the border between the states of Sao Paulo and Parana, lasting up to near the ocean floor along with the fracture zone of Rio de Janeiro. The Capricorn Lineament is a feature inherited from the separation between the continents of Africa and South America, and is the main structural feature NW / SE of the Santos Basin center-south region. These two structures together with other ones with continental origin may be associated with structural features in the sediments from the Santos Basin. This work aims to characterize the structures operating in the central portion of the Santos Basin based on subsurface data in the offshore area (2D seismic) together with data from the surface of the continental basement in a way to correlate the Santos Basin structures with the continental regional traits. This data interpolation showed that the structural features of the continent operates on the submerged zone, the seismic sections show these structural trends for the Paranapanema Lineament / Fracture Zone of Rio de Janeiro, Capricorn Lineament and two fault zones that exhibit structures typical of a transfer zone

Análise fractal de fraturas em regime linear elástico: modo I de carregamento

For the development of this graduate work of fractal fracture behavior, it is necessary to establish references for fractal analysis on fracture surfaces, evaluating, from tests of fracture tenacity on modes I, II and combined I / II, the behavior of fractures in fragile materials, on linear elastic regime. Fractures in the linear elastic regime are described by your fractal behavior by several researchers, especially Mecholsky JJ. The motivation of that present proposal stems from work done by the group and accepted for publication in the journal Materials Science and Engineering A (Horovistiz et al, 2010), where the model of Mecholsky could not be proven for fractures into grooved specimens for tests of diametric compression of titania on mode I. The general objective of this proposal is to quantify the distinguish surface regions formed by different mechanisms of fracture propagation in linear elastic regime in polymeric specimens (phenolic resin), relating tenacity, thickness of the specimens and fractal dimension. The analyzed fractures were obtained from SCB tests in mode I loading, and the acquisition of images taken using an optical reflection microscope and the surface topographies obtained by the extension focus method of reconstruction, calculating the values of fractal dimension with the use of maps of elevations. The fractal dimension was classified as monofractal dimension (Df), when the fracture is described by a single value, or texture size (Dt), which is a macroscopic analysis of the fracture, combined with the structural dimension (Ds), which is a microscopic analysis. The results showed that there is no clear relationship between tenacity, thickness and fractal values for the material investigated. On the other hand it is clear that the fractal values change with the evolution of cracks during the fracture process ... (Complete abstract click electronic access below)

Múltiplas imagens: a representação da mulher negra no Brasil

The aim of this paper is to present the readings, the reflections that have emerged, and, also, the results obtained by the search Multiple Images: The representation of black women in Brazil. The project aimed to find the black woman‟ images presented in historically constructed representations, for this was made a cut in images production of black people, choosing three artists, two works of each in three different historical moments, which according to the recanted the look of your time. The works and the artists were: Esclaves nègres, de différentes nations (1820-1830) e Negresses libres, vivant de leur travail (1820-1830) – Jean-Baptiste Debret; Baiana sambando (1926-1939) and Sambista descansando (1926-1939) – Cecília Meireles; Bastidores (1996) e Amas-de-leite (2008) – Rosana Paulino. The analysis of this corpus rests on the Reception Aesthetics and the Theory of Effect, searching the interaction between text and reader

Avaliação do método de classificação baseada no objeto em imagens de alta resolução espacial aplicado para o monitoramento de faixa de dutos: estudo de caso no entorno da refinaria de Capuava em Mauá - SP

The metropolitan region of São Paulo is the most populous of the country, this happens because of its great importance in the national economy and the job opportunities that are offered to the population. These factors result in intense population growth and urban expansion, reaching some non-habitable places of the metropolis, as areas of pipelines, which are very important for the transportation of natural gas, oil and its derivatives. Before the population growth of the region, these sites were unoccupied, do not presenting problems for the population. However, with the disorderly occupation is generated great anthropogenic pressure on the pipeline stitches, causing risks to people who are around them. Therefore it is extremely important to monitor the strip of pipelines through products and techniques of remote sensing and geoprocessing, enabling, through high spatial resolution images, identification of objects or phenomena that occur on Earth's surface that can alter the functioning and safety of pipelines. Therefore, this study aims to monitor a stretch of the area of the pipeline mesh GASPAL/OSVAT and Capuava Refinery (RECAP), located on the outskirts of the metropolitan area of São Paulo in the city of Mauá, who suffer great human pressure, proving thus the techniques of remote sensing and geographic information system (GIS) as effective tools for monitoring phenomena occurred in urban areas of great complexity. The monitoring was done by object-based classification applied in orbital images Ikonos II and RapidEye, of high spatial resolution and, image processing, detection of objects, segmentation, classification and editing were developed through the eCognition and ArcGis softwares. To determine the statistical accuracy of the mapping of the land cover of the stretch of pipeline in Maua, the results were analyzed by error matrix... (Complete abstract click electronic access below)

Implicações do ensino de arte nos anos iniciais: o trabalho com a leitura de imagens

This paper aims to address initially the implications and consequences of the planned use of image reading in classrooms of Art in the early years of elementary school. Enumerating some contributions to enrich and develop narrative skills, descriptive, analytical and interpretative. Thus, in a next goal will be researched the importance and essentiality of working with the reading of images, not only in art classes but at other opportunities, working intertextuality. Mobilizing both rationality and imagination, enhancing the information and content as well as encouraging creativity and analytical formation of subjectivity. Aiming at meaningful learning and encouraging other views and ways of thinking, feeling, teach, learn and be

Reconstrução paleogeográfica da área da bacia do rio Jequitaí - MG

Os solos, assim como as rochas, materiais inconsolidados e regolíticos, apresentam propriedades e características específicas, relativas a seus ambientes de formação. A partir de então o solo torna-se uma fonte de informação de toda a história evolutiva de uma região em seus mais variados parâmetros. Uma das formas de entender essa evolução dinâmica da paisagem é gerando um modelo de paleosuperfícies a partir da interpolação de confluências de drenagem. O trabalho objetivou reconstruir a paleogeografia da área inserida na bacia do Rio Jequitaí, a partir do Método de Isobases Confluentes, procurando analisar e identificar a evolução dos solos. A área está localizada na região centro-norte de Minas Gerais, sendo o Rio Jequitaí um afluente do Alto Rio São Francisco. O trabalho consistiu, na primeira etapa, em levantamento biblio/cartográfico da área em estudo. Durante esse levantamento, além de detectar as características físicas, bióticas e sócio-econômicas de modo a completar, reorganizar e adequar as informações da área, foi levantado um banco de dados base para a geração das Isobases, o qual foi constituído por modelos digitais de elevação (DEM) do programa ASTER e de dados vetoriais da principal rede de drenagem da bacia do Jequitaí. Na segunda etapa, as paleosuperfícies foram geradas usando aplicativos do programa ArcGis da ESRI. O produto final são as proto-superfícies para cada ordem de confluência. Assim no término do trabalho tem-se uma reconstrução da paleopaisagem correspondente, bem como das pro-estruturas equivalentes às condições de equilíbrio dinâmico daquele momento. A partir dos resultados obtidos foi possível concluir que a metodologia das Isobases Confluentes permite correlacionar os dados palinológicos, geocronológicos e geomorfológicos obtidos durante o estudo, para a reconstrução dos ambientes... (Resumo completo, clicar acesso eletrônico abaixo)

Um método para reconstrução de superfícies baseado em nuvem de pontos visando representações em multirresolução

The representation of real objects in virtual environments has applications in many areas, such as cartography, mixed reality and reverse engineering. The generation of these objects can be performed in two ways: manually, with CAD (Computer Aided Design) tools, or automatically, by means of surface reconstruction techniques. The simpler the 3D model, the easier it is to process and store it. Multiresolution reconstruction methods can generate polygonal meshes in different levels of detail and, to improve the response time of a computer program, distant objects can be represented with few details, while more detailed models are used in closer objects. This work presents a new approach to multiresolution surface reconstruction, particularly interesting to noisy and low definition data, for example, point clouds captured with Kinect sensor