Do our feelings leak through the clothes we wear?

There is a substantial body of literature that suggests that clothing and more particularly fashion is a form of communication. It communicates how we want to be seen by others as well as how we see ourselves. But does it communicate how we feel? This paper draws a link between symbolic and emotional communication by suggesting that fashion changes our internal feelings and that many of these emotions are expressed to others through symbols such as the clothes we wear. A conceptual framework is presented explaining the effects of clothing on an individual consumer. This framework classifies the fashion effect into internally and externally communicated meanings. Knowledge of how fashion is used as a form of emotional expression is particularly important for those fashion retailers who display the clothing they sell to engender positive feelings that may then lead to purchase behaviour.

The transition from severe to mild wear in law alloy steel

The wear rates of sliding surfaces are significantly reduced if mild oxidational wear can be encouraged. It is hence of prime importance in the interest of component life and material conservation to understand the factors necessary to promote mild, oxidational wear, The present work investigates the fundamental mechanism of the running-in wear of BS EN 31!EN 8 steel couples. under various conditions of load. speed and test duration. Unidirectional sliding experiments were carried out on a pin-on~disc wear machine where frictional force, wear rate, temperature and contact resistance were continuously monitored during each test. Physical methods of analysis (x-ray, scanning electron microscopy etc.) were used to examine the wear debris and worn samples. The wear rate versus load curves revealed mild wear transitions, which under long duration of running, categorized mild wear into four distinct regions.α-Fe20s. Fe304, FeO and an oxide mixture were the predominant oxides in four regions of oxidational wear which were identified above the Welsh T2 transition. The wear curves were strongly effected by the speed and test duration. A surface model was used to calculate the surface parameters, and the results were found to be comparable with the experimentally observed parameters. Oxidation was responsible for the transition from severe to mild wear at a load corresponding to the Welsh T2 transition. In the running-in period sufficient energy input and surface hardness enabled oxide growth rate to increase and eventually exceeded the rate of removal, where mild wear ensued. A model was developed to predict the wear volume up to the transition. Remarkable agreement was found between the theoretical prediction and the experimentally-measured values. The oxidational mechanjsm responsible for transitjon to mild wear under equilibrium conditions was related to the formation of thick homogenous oxide plateaux on subsurface hardened layers, FeO was the oxide formed initially at the onset of mild wear but oxide type changed.during the total running period to give an equilibrium oxide whose nature depended on the loads applied.

Alliances to support the railway infrastructure of the United Kingdom:is the industry ready?

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT

Imputing accelerometer non-wear time when assessing children's moderate-to-vigorous physical activity

BACKGROUND: Moderate-to-vigorous physical activity (MVPA) is an important determinant of children’s physical health, and is commonly measured using accelerometers. A major limitation of accelerometers is non-wear time, which is the time the participant did not wear their device. Given that non-wear time is traditionally discarded from the dataset prior to estimating MVPA, final estimates of MVPA may be biased. Therefore, alternate approaches should be explored. OBJECTIVES: The objectives of this thesis were to 1) develop and describe an imputation approach that uses the socio-demographic, time, health, and behavioural data from participants to replace non-wear time accelerometer data, 2) determine the extent to which imputation of non-wear time data influences estimates of MVPA, and 3) determine if imputation of non-wear time data influences the associations between MVPA, body mass index (BMI), and systolic blood pressure (SBP). METHODS: Seven days of accelerometer data were collected using Actical accelerometers from 332 children aged 10-13. Three methods for handling missing accelerometer data were compared: 1) the “non-imputed” method wherein non-wear time was deleted from the dataset, 2) imputation dataset I, wherein the imputation of MVPA during non-wear time was based upon socio-demographic factors of the participant (e.g., age), health information (e.g., BMI), and time characteristics of the non-wear period (e.g., season), and 3) imputation dataset II wherein the imputation of MVPA was based upon the same variables as imputation dataset I, plus organized sport information. Associations between MVPA and health outcomes in each method were assessed using linear regression. RESULTS: Non-wear time accounted for 7.5% of epochs during waking hours. The average minutes/day of MVPA was 56.8 (95% CI: 54.2, 59.5) in the non-imputed dataset, 58.4 (95% CI: 55.8, 61.0) in imputed dataset I, and 59.0 (95% CI: 56.3, 61.5) in imputed dataset II. Estimates between datasets were not significantly different. The strength of the relationship between MVPA with BMI and SBP were comparable between all three datasets. CONCLUSION: These findings suggest that studies that achieve high accelerometer compliance with unsystematic patterns of missing data can use the traditional approach of deleting non-wear time from the dataset to obtain MVPA measures without substantial bias.

Self-refraction, ready-made glasses and quality of life among rural myopic Chinese children: a non-inferiority randomized trial.

PURPOSE: To study, for the first time, the effect of wearing ready-made glasses and glasses with power determined by self-refraction on children's quality of life. METHODS: This is a randomized, double-masked non-inferiority trial. Children in grades 7 and 8 (age 12-15 years) in nine Chinese secondary schools, with presenting visual acuity (VA) ≤6/12 improved with refraction to ≥6/7.5 bilaterally, refractive error ≤-1.0 D and <2.0 D of anisometropia and astigmatism bilaterally, were randomized to receive ready-made spectacles (RM) or identical-appearing spectacles with power determined by: subjective cycloplegic retinoscopy by a university optometrist (U), a rural refractionist (R) or non-cycloplegic self-refraction (SR). Main study outcome was global score on the National Eye Institute Refractive Error Quality of Life-42 (NEI-RQL-42) after 2 months of wearing study glasses, comparing other groups with the U group, adjusting for baseline score. RESULTS: Only one child (0.18%) was excluded for anisometropia or astigmatism. A total of 426 eligible subjects (mean age 14.2 years, 84.5% without glasses at baseline) were allocated to U [103 (24.2%)], RM [113 (26.5%)], R [108 (25.4%)] and SR [102 (23.9%)] groups, respectively. Baseline and endline score data were available for 398 (93.4%) of subjects. In multiple regression models adjusting for baseline score, older age (p = 0.003) and baseline spectacle wear (p = 0.016), but not study group assignment, were significantly associated with lower final score. CONCLUSION: Quality of life wearing ready-mades or glasses based on self-refraction did not differ from that with cycloplegic refraction by an experienced optometrist in this non-inferiority trial.

Development of a model to predict the life of pneumatic conveyor bends subject to erosive wear

The erosion processes resulting from flow of fluids (gas-solid or liquid-solid) are encountered in nature and many industrial processes. The common feature of these erosion processes is the interaction of the fluid (particle) with its boundary thus resulting in the loss of material from the surface. This type of erosion in detrimental to the equipment used in pneumatic conveying systems. The puncture of pneumatic conveyor bends in industry causes several problems. Some of which are: (1) Escape of the conveyed product causing health and dust hazard; (2) Repairing and cleaning up after punctures necessitates shutting down conveyors, which will affect the operation of the plant, thus reducing profitability. The most common occurrence of process failure in pneumatic conveying systems is when pipe sections at the bends wear away and puncture. The reason for this is particles of varying speed, shape, size and material properties strike the bend wall with greater intensity than in straight sections of the pipe. Currently available models for predicting the lifetime of bends are inaccurate (over predict by 80%. The provision of an accurate predictive method would lead to improvements in the structure of the planned maintenance programmes of processes, thus reducing unplanned shutdowns and ultimately the downtime costs associated with these unplanned shutdowns. This is the main motivation behind the current research. The paper reports on two aspects of the first phases of the study-undertaken for the current project. These are (1) Development and implementation; and (2) Testing of the modelling environment. The model framework encompasses Computational Fluid Dynamics (CFD) related engineering tools, based on Eulerian (gas) and Lagrangian (particle) approaches to represent the two distinct conveyed phases, to predict the lifetime of conveyor bends. The method attempts to account for the effect of erosion on the pipe wall via particle impacts, taking into account the angle of attack, impact velocity, shape/size and material properties of the wall and conveyed material, within a CFD framework. Only a handful of researchers use CFD as the basis of predicting the particle motion, see for example [1-4] . It is hoped that this would lead to more realistic predictions of the wear profile. Results, for two, three-dimensional test cases using the commercially available CFD PHOENICS are presented. These are reported in relation to the impact intensity and sensitivity to the inlet particle distributions.

Combined exposure to multiple mycotoxins in food: are we ready for risk assessment and risk management?

It is nowadays recognized that the risk of human co-exposure to multiple mycotoxins is real. In the last years, a number of studies have approached the issue of co-exposure and the best way to develop a more precise and realistic assessment. Likewise, the growing concern about the combined effects of mycotoxins and their potential impact on human health has been reflected by the increasing number of toxicological studies on the combined toxicity of these compounds. Nevertheless, risk assessment of these toxins, still follows the conventional paradigm of single exposure and single effects, incorporating only the possibility of additivity but not taking into account the complex dynamics associated to interactions between different mycotoxins or between mycotoxins and other food contaminants. Considering that risk assessment is intimately related to the establishment of regulatory guidelines, once the risk assessment is completed, an effort to reduce or manage the risk should be followed to protect public health. Risk assessment of combined human exposure to multiple mycotoxins thus poses several challenges to scientists, risk assessors and risk managers and opens new avenues for research. This presentation aims to give an overview of the different challenges posed by the likelihood of human co-exposure to mycotoxins and the possibility of interactive effects occurring after absorption, towards knowledge generation to support a more accurate human risk assessment and risk management. For this purpose, a physiologically-based framework that includes knowledge on the bioaccessibility, toxicokinetics and toxicodynamics of multiple toxins is proposed. Regarding exposure assessment, the need of harmonized food consumption data, availability of multianalyte methods for mycotoxin quantification, management of left-censored data and use of probabilistic models will be highlight, in order to develop a more precise and realistic exposure assessment. On the other hand, the application of predictive mathematical models to estimate mycotoxins’ combined effects from in vitro toxicity studies will be also discussed. Results from a recent Portuguese project aimed at exploring the toxic effects of mixtures of mycotoxins in infant foods and their potential health impact will be presented as a case study, illustrating the different aspects of risk assessment highlighted in this presentation. Further studies on hazard and exposure assessment of multiple mycotoxins, using harmonized approaches and methodologies, will be crucial towards an improvement in data quality and contributing to holistic risk assessment and risk management strategies for multiple mycotoxins in foodstuffs.

Ready for Transition: Factors that facilitate transfer to undergraduate engineering programs among Black African and American students

This study examines the factors facilitating the transfer admission of students broadly classified as Black from a single community college into a selective engineering college. The work aims to further research on STEM preparation and performance for students of color, as well as scholarship on increasing access to four-year institutions from two-year schools. Factors illuminating Underrepresented Racial and Ethnic Minority (URM) student pathways through Science, Technology, Engineering, and Mathematics (STEM) degree programs have often been examined through large-scale quantitative studies. However, this qualitative study complements quantitative data through demographic questionnaires, as well as semi-structured individual and group. The backgrounds and voices of diverse Black transfer students in four-year engineering degree programs were captured through these methods. Major findings from this research include evidence that community college faculty, peer networks, and family members facilitated transfer. Other results distinguish Black African from Black American transfers; included in these distinctions are depictions of different K-12 schooling experiences and differences in how participants self-identified. The findings that result from this research build upon the few studies that account for expanded dimensions of student diversity within the Black population. Among other demographic data, participants’ countries of birth and years of migration to the U.S. (if applicable) are included. Interviews reveal participants’ perceptions of factors impacting their educational trajectories in STEM and subsequent ability to transfer into a competitive undergraduate engineering program. This study is inclusive of, and reveals an important shifting demographic within the United States of America, Black Africans, who represent one of the fastest-growing segments of the immigrant population.

9 months to get ready

This document explains what to expect during each month of pregnancy. It also discusses exercise during pregnancy, prenatal care, sex during pregnancy, normal complaints and problems of pregnancy and other issues.

Are library and information professionals ready for evidence based practice?

Evidence based practice (EBP) is recognised as a way of improving the quality of professional practice in many disciplines however its adoption within library and information sciences (LIS) has been gradual. The term was first introduced into the library and information profession‟s vocabulary a decade ago but an impediment to its uptake is the lack of clear understanding regarding how LIS practitioners understand the concept. Partridge, Thorpe, Edwards and Hallam (2007) identified the need to understand how LIS professionals experience or understand evidence based practice and proposed a model of four categories of experience to describe how LIS professionals experience EBP. This paper extends that framework by refining the different conceptions of evidence based practice and identifying relationships which exist between the categories of experience to provide a rich description of the EBP phenomenon. The paper also argues that the phrase “evidence based librarianship” and its variations be abandoned as practitioners do not see a distinction between EBP as applied to librarianship and information practice and industry specific jargon like “evidence based library and information practice”. This research will help current and future LIS practitioners, leaders and educators engage more actively in the establishment of an evidence based culture to improve library and information practice in Australia and internationally.

Wear mechanisms and scale effects in two-body abrasion

The ‘particle size effect’ and its manifestation in abrasion still attracts considerable debate as to its origins and the ranking of its likely causes. Experiments have been conducted to study the important contribution that the formation of wear debris can have on the progression of wear. The experiments consist of unlubricated (dry) pin-on-disk tests with silicon carbide coated paper of varying particle size, with different pin material, diameter and loads. It has been observed that the influence of debris formation on wear rate is more pronounced for fine abrasives and soft-wearing materials. Consequently, it is proposed that the particle size effect can be explained in terms of geometrical scaling and the evolution of third-body effects with diminishing particle diameter.

Seeing pedestrians at night : visual clutter does not mask biological motion

Although placing reflective markers on pedestrians’ major joints can make pedestrians more conspicuous to drivers at night, it has been suggested that this “biological motion” effect may be reduced when visual clutter is present. We tested whether extraneous points of light affected the ability of 12 younger and 12 older drivers to see pedestrians as they drove on a closed road at night. Pedestrians wore black clothing alone or with retroreflective markings in four different configurations. One pedestrian walked in place and was surrounded by clutter on half of the trials. Another was always surrounded by visual clutter but either walked in place or stood still. Clothing configuration, pedestrian motion, and driver age influenced conspicuity but clutter did not. The results confirm that even in the presence of visual clutter pedestrians wearing biological motion configurations are recognized more often and at greater distances than when they wear a reflective vest.