Análise química de produtos de incrustação em dutos de petróleo por espectometria de fluorescência de raios X

The quantitative chemical characterization of the inorganic fraction of scale products is very relevant in studying, monitoring and controlling corrosive processes of oil pipelines. The X-ray fluorescence spectrometry (XRF) is a very versatile analytical technique, which can be used in quantitative analysis in solid samples at low concentrations of the chemical element, in the order of few ppm. A methodology that involves sample preparation diluted in the proportion of 1:7 (one portion of the sample for seven of wax), pressed as pellets was used in the XRF calibration for chemical analysis of scale products from oil pipelines. The calibration involved the preparation of reference samples from mixtures of P.A. reagents, aiming to optimize the time consumed in the steps of sample preparation and analysis of Al, Ba, Ca, Fe, K, Mg, Mn, Na, P, S, Si, Sr and Ti, using the same pressed pellet for trace and major elements analysis

Secagem de misturas de polpa de frutas tropicais em leito de jorro

Drying of fruit pulps in spouted beds of inert particles has been indicated as a viable technique to produce fruit powders. Most of the processes employed to produce dried fruit pulps and juices, such as Foam Mat, encapsulation by co-crystallization and spray drying utilize adjuvant and additives (such as thickeners, coating materials, emulsifiers, acidulants, flavors and dyes), which is not always desirable. The fruit pulp composition exerts an important effect on the fruit powder production using a spouted bed. In the study by Medeiros (2001) it was concluded that lipids, starch and pectin contents play an important role on the process performance, enhancing the powder production; however, the drying of fruit pulps containing high content of reducing sugars (glucose and fructose) is practically unviable. This work has the objective of expanding the studies on drying of fruit pulps in spouted bed with aid of adjuvant (lipids, starch and pectin) aiming to enhance the dryer performance without jeopardizing the sensorial quality of the product. The optimum composition obtained by Medeiros (2001) was the basis for preparing the mixtures of pulps. The mixture formulations included pulps of mango (Mangifera indica), umbu (Spondias tuberosa) and red mombin (Spondia purpurea) with addition of cornstarch, pectin and lipids. Different products were used as lipids source: olive and Brazil nut oils, coconut milk, heavy milk, powder of palm fat and palm olein. First of all, experiments were conducted to define the best formulation of the fruit pulps mixture. This definition was based on the drying performance obtained for each mixture and on the sensorial characteristics of the dry powder. The mixture formulations were submitted to drying at fixed operating conditions of drying and atomizing air flow rate, load of inert particles, temperature and flow rate of the mixture. The best results were obtained with the compositions having powder of palm fat and palm olein in terms of the drying performance and sensorial analysis. Physical and physicochemical characteristics were determined for the dry powders obtained from the mixtures formulations. Solubility and reconstitution time as well as the properties of the product after reconstitution were also evaluated. According to these analyses, the powder from the mixtures formulations presented similar characteristics and compatible quality to those produced in other types of dryers. Considering that the palm olein is produced in Brazil and that it has been used in the food industry substituting the palm fat powder, further studies on drying performance were conducted with the composition that included the palm olein. A complete factorial design of experiments 23, with three repetitions at the central point was conducted to evaluate the effects of the air temperature, feeding flow rate and intermittence time on the responses related to the process performance (powder collection efficiency, material retained in the bed and angle of repose of the inert particles after the process) and to the product quality (mean moisture content, loss of vitamin C and solubility). Powder production was uniform for the majority of the experiments and the higher efficiency with lower retention in the bed (59.2% and 1.8g, respectively) were obtained for the air temperature of 80°C, mixture feed rate of 5ml/min in intervals of 10 min. The statistical analysis of the results showed that the process variables had individual or combined significant influences on the powder collection efficiency, material retention in the bed, powder moisture content and loss of vitamin C. At the experimental ranges of this work, the angle of repose and solubility were not influenced by the operating variables. From the results of the experimental design, statistical models were obtained for the powder moisture content and loss of vitamin C

Coberturas vegetais, doses de nitrogênio e inoculação de sementes com Azospirillum brasilense em arroz de terras altas no sistema plantio direto

O arroz é importante fonte de energia e proteínas para a população mundial, principalmente na Ásia e Oceania. No Brasil, juntamente com o feijão, constitui a base da alimentação. Tecnologias sustentáveis que reduzam custos da produção e aumentem a produtividade do arroz podem garantir seu suprimento em períodos de alta demanda. O objetivo deste trabalho foi avaliar diferentes coberturas vegetais antecessoras (milheto [Pennisetum americanum], crotalária [Crotalaria juncea], guandu [Cajanus cajan], braquiária [Brachiaria ruziziensis], milheto + crotalária e milheto + guandu), doses de nitrogênio (N) em cobertura (0, 40, 80 e 120 kg ha-1) e o efeito da inoculação de sementes com Azospirillum brasilense no arroz de terras altas em sistema plantio direto no desenvolvimento e na produtividade. Utilizou-se o delineamento experimental em blocos casualizados em esquema fatorial 6x4x2 com quatro repetições. O estudo foi desenvolvido em um Latossolo Vermelho, em Selvíria, Estado do Mato Grosso do Sul, Brasil, em 2011/2012. O cultivo do guandu antecedendo o arroz proporcionou maior produtividade do arroz somente em comparação a B. ruziziensi. A produtividade do arroz em função das doses de N em cobertura se ajustou a uma função quadrática. Não houve influência da inoculação de sementes com A. brasilense sobre a produtividade do arroz, porém houve interação entre a inoculação e as coberturas vegetais sobre o teor de N foliar, número de panículas por m², matéria seca de plantas de arroz e a massa de cem grãos.

Restos vegetais e adubação nitrogenada na micorrização e produtividade do arroz de terras altas em sistema plantio direto

The objective of this research was to verify the influence of plant residues and the nitrogen fertilization in covering on the mycorrhization (colonization and number of spores of the arbuscular mycorrhizal fungi), and grain yield of upland rice grown under a no tillage system. The experiment was conducted at the Experimental Farm Station of Unesp/Ilha Solteira Campus, at Selviria (Mato Grosso do Sul State). In the main plots, the leguminous were tested: sun hemp (Crotalaria juncea L.), pigeon pea (Cajanus cajan L.) and velvet bean (Stizolobium aterrimum Piper & Tracy) and the grass: corn (Zea mays L.), millet (Peenisetum americamum L.) and grain sorghum (Sorghum bicolor L.), plus no planted area during the winter, as plant cover. In the subplots, after the rice sowing, the nitrogen fertilization in covering (zero and 75 kg ha(-1) of N at the urea form) was used. The rice grain yield was influenced by the plant residues, but not for the N doses or the interaction. The sorghum grain showed negative influence on the rice productivity. The nitrogen fertilization influenced the number of spores, but not the mycorrhizal colonization or the grain yield, at the time of the crop. Correlation between the studied variable was riot found.

Efeitos alelopáticos de extratos vegetais na germinação, colonização micorrízica e crescimento inicial de milho, soja e feijão

Restos vegetais e liteira podem interferir no desenvolvimento de plantas. Este trabalho objetivou avaliar os efeitos alelopáticos de extratos aquosos de Pinus sp., milheto (Pennisetum americanum (L.) Leeke) e mucuna (Stizolobium aterrimum Piper & Tracy) sobre a germinação, colonização micorrízica e crescimento inicial de milho (Zea mays L.), soja (Glycine max L.) e feijão (Phaseolus vulgaris L.). Os extratos foram elaborados utilizando folhas trituradas. O experimento in vitro empregou papel Germitest umedecido com extratos ou água destilada por sete dias. O experimento em casa de vegetação teve esquema fatorial 3 x 3 x 4, com quatro repetições: três espécies vegetais (soja, milho e feijão), três extratos aquosos (Pinus, milheto e mucuna) e quatro doses de extrato (0,0; 0,5; 1,0; e 2,0 kg L-1). O substrato foi Latossolo Vermelho coletado no município de Selvíria-MS, no bioma Cerrado. Após a semeadura, os vasos receberam, a cada cinco dias, por 45 dias, 50 mL dos extratos. Para a soja, extratos de mucuna e milheto diminuíram o comprimento do hipocótilo e da radícula e os de Pinus aumentaram esses comprimentos. em feijão, o extrato de Pinus diminuiu o comprimento do hipocótilo e da radícula, mas os extratos de mucuna e milheto aumentaram-no. O extrato do milheto reduziu a percentagem e a velocidade de germinação em feijão. Todos os extratos reduziram a colonização micorrízica e o número de esporos de fungos micorrízicos arbusculares em soja, milho e feijão.

Análise econômica da produção de feijão em função de doses de nitrogênio e coberturas vegetais

O nitrogênio é o nutriente aplicado em maior quantidade à cultura do feijão, o mais limitante ao crescimento e desenvolvimento das plantas e o que mais onera o custo de produção. Uma boa opção para o produtor diminuir custos, com a utilização de fertilizantes nitrogenados, é a utilização de plantas de cobertura do solo, também conhecidas como adubos verdes. Assim, este trabalho objetivou avaliar os custos de produção e índices de lucratividade de diferentes tratamentos envolvendo coberturas vegetais e doses de nitrogênio em cobertura, na cultura do feijoeiro irrigado, em sistema plantio direto, nas safras de inverno de 2010 e 2011. O trabalho foi realizado em área experimental localizada no município de Selvíria (MS), em Latossolo Vermelho distrófico típico. Os tratamentos constituíram-se de seis coberturas vegetais (Crotalaria juncea, milheto, guandú, Crotalaria juncea + milheto, guandú + milheto e pousio) e quatro doses de N (0 kg ha-1, 30 kg ha-1, 60 kg ha-1 e 90 kg ha-1). Foram estimados o custo operacional total, receita bruta, lucro operacional, índice de lucratividade, produtividade de equilíbrio e o preço de equilíbrio. Concluiu-se que o uso da Crotalaria juncea, como cobertura vegetal do solo, proporcionou os maiores valores de custo operacional total e lucro operacional e os melhores índices de lucratividade, e que o incremento nas doses de nitrogênio aumentou o custo operacional total, com tendência de aumento na produtividade e, consequentemente, no preço de equilíbrio.

Uma estratégia dirigida a modelos e baseada em linguagem de descrição arquitetural para linhas de produtos de software

Model-oriented strategies have been used to facilitate products customization in the software products lines (SPL) context and to generate the source code of these derived products through variability management. Most of these strategies use an UML (Unified Modeling Language)-based model specification. Despite its wide application, the UML-based model specification has some limitations such as the fact that it is essentially graphic, presents deficiencies regarding the precise description of the system architecture semantic representation, and generates a large model, thus hampering the visualization and comprehension of the system elements. In contrast, architecture description languages (ADLs) provide graphic and textual support for the structural representation of architectural elements, their constraints and interactions. This thesis introduces ArchSPL-MDD, a model-driven strategy in which models are specified and configured by using the LightPL-ACME ADL. Such strategy is associated to a generic process with systematic activities that enable to automatically generate customized source code from the product model. ArchSPLMDD strategy integrates aspect-oriented software development (AOSD), modeldriven development (MDD) and SPL, thus enabling the explicit modeling as well as the modularization of variabilities and crosscutting concerns. The process is instantiated by the ArchSPL-MDD tool, which supports the specification of domain models (the focus of the development) in LightPL-ACME. The ArchSPL-MDD uses the Ginga Digital TV middleware as case study. In order to evaluate the efficiency, applicability, expressiveness, and complexity of the ArchSPL-MDD strategy, a controlled experiment was carried out in order to evaluate and compare the ArchSPL-MDD tool with the GingaForAll tool, which instantiates the process that is part of the GingaForAll UML-based strategy. Both tools were used for configuring the products of Ginga SPL and generating the product source code

Algorítmo evolucionário para a distribuição de produtos de petróleo por redes de polidutos

The distribution of petroleum products through pipeline networks is an important problem that arises in production planning of refineries. It consists in determining what will be done in each production stage given a time horizon, concerning the distribution of products from source nodes to demand nodes, passing through intermediate nodes. Constraints concerning storage limits, delivering time, sources availability, limits on sending or receiving, among others, have to be satisfied. This problem can be viewed as a biobjective problem that aims at minimizing the time needed to for transporting the set of packages through the network and the successive transmission of different products in the same pipe is called fragmentation. This work are developed three algorithms that are applied to this problem: the first algorithm is discrete and is based on Particle Swarm Optimization (PSO), with local search procedures and path-relinking proposed as velocity operators, the second and the third algorithms deal of two versions based on the Non-dominated Sorting Genetic Algorithm II (NSGA-II). The proposed algorithms are compared to other approaches for the same problem, in terms of the solution quality and computational time spent, so that the efficiency of the developed methods can be evaluated

GingaForAll: linha de Produtos do Middleware Ginga

Many challenges have been imposed on the middleware to support applications for digital TV because of the heterogeneity and resource constraints of execution platforms. In this scenario, the middleware must be highly configurable so that it can be customized to meet the requirements of applications and underlying platforms. This work aims to present the GingaForAll, a software product line developed for the Ginga - the middleware of the Brazilian Digital TV (SBTVD). GingaForAll adds the concepts of software product line, aspect orientation and model-driven development to allow: (i) the specification of the common characteristics and variables of the middleware, (ii) the modularization of crosscutting concerns - both mandatory and concepts variables - through aspects, (iii) the expression of concepts as a set of models that increase the level of abstraction and enables management of various software artifacts in terms of configurable models. This work presents the architecture of the software product line that implements such a tool and architecture that supports automatic customization of middleware. The work also presents a tool that implements the process of generating products GingaForAll

Dos requisitos à arquitetura em linhas de produtos de software: uma estratégia de transformações entre modelos

The tracking between models of the requirements and architecture activities is a strategy that aims to prevent loss of information, reducing the gap between these two initial activities of the software life cycle. In the context of Software Product Lines (SPL), it is important to have this support, which allows the correspondence between this two activities, with management of variability. In order to address this issue, this paper presents a process of bidirectional mapping, defining transformation rules between elements of a goaloriented requirements model (described in PL-AOVgraph) and elements of an architectural description (defined in PL-AspectualACME). These mapping rules are evaluated using a case study: the GingaForAll LPS. To automate this transformation, we developed the MaRiPLA tool (Mapping Requirements to Product Line Architecture), through MDD techniques (Modeldriven Development), including Atlas Transformation Language (ATL) with specification of Ecore metamodels jointly with Xtext , a DSL definition framework, and Acceleo, a code generation tool, in Eclipse environment. Finally, the generated models are evaluated based on quality attributes such as variability, derivability, reusability, correctness, traceability, completeness, evolvability and maintainability, extracted from the CAFÉ Quality Model

BMMobile: uma linha de produtos para dimensionamento de bombeio mecânico em dispositivos móveis

With the increase of processing ability, storage and several kinds of communication existing such as Bluetooth, infrared, wireless networks, etc.., mobile devices are no longer only devices with specific function and have become tools with various functionalities. In the business field, the benefits that these kinds of devices can offer are considerable, because the portability allows tasks that previously could only be performed within the work environment, can be performed anywhere. In the context of oil exploration companies, mobile applications allow quick actions could be taken by petroleum engineers and technicians, using their mobile devices to avoid potential catastrophes like an unexpected stop or break of important equipment. In general, the configuration of equipment for oil extraction is performed on the work environment using computer systems in desktop platforms. After the obtained configuration, an employee goes to equipment to be configured and perform the modifications obtained on the use desktop system. This management process equipment for oil extraction takes long time and does not guarantee the maintenance in time to avoid problems. With the use of mobile devices, management and maintenance of equipment for oil extraction can be performed in a more agile time once it enables the engineer or technician oil can perform this configuration at the time and place where the request comes for example, near in the oil well where the equipment is located. The wide variety of mobile devices creates a big difficulty in developing mobile applications, since for one application can function in several types of devices, the application must be changed for each specific type of device, which makes the development quite costly. This paper defines and implements a software product line for designing sucker-rod pumping systems on mobile devices. This product line of software, called BMMobile, aims to produce products that are capable of performing calculations to determine the possible configurations for the equipment in the design suckerrod pumping, and managing the variabilities of the various products that can be generated. Besides, this work performs two evaluations. The first evaluation will verify the consistency of the products produced by the software product line. The second evaluation will verify the reuse of some products generated by SPL developed

Potencial de uso dos recursos vegetais em uma comunidade rural do semiárido do Rio Grande do Norte

The aim of the present study was to identify the main plant use categories of native varieties from the Caatinga biome, in the rural community of Caicó, Rio Grande do Norte state (Northeastern Brazil). Semi-structured and structured interviews were used to gather information from local specialists about the use of the plants. The uses of 69 species are described by 23 observers (woodsmen, herb doctors, healers, farmers and housewives) aged 35 years or more. These species were allocated to seven categories: medicinal, wood plants, nutritional, mystic, fuel, forage plants and domestic use. The most represented families were Fabaceae (14 spp.), Euphorbiaceae (6 spp.), Cucurbitaceae (3 spp.) and Cactaceae (3 spp.). The calculation of use- value showed that the cumaru (Amburana cearensis (Allemão) A. C. Sm) and the jurema-preta (Mimosa tenuiflora (Willd.) Poir) were the most commonly mentioned, in addition to having the largest number of uses. The data obtained confirm the potential of the plants from the Seridó region and reinforce the importance of biodiversity for rural communities, underscoring the need for local plant management

Análise caracterização da dinâmica da Foz do Rio Apodi, região de Areia Branca/RN, com base na cartografia temática multitemporal de produtos de sensores remotos

The study area islocated in the northern cost of Rio Grande do Norte State, preciselyin a west zone of Apodi-Mossoró River, inclunding Tibau City, Grossos City and part of Mossoró City. Geologicaly, this area is composed by rokcs of Potiguar basin, represented by Cretaceous, Tertiary and Quaternary sediments. This area is characterizer by the intense action of cosatal processes (eolic and costal tranports, generalized erosion, alteration in the sediments balance and coast modification), reponsable for it´s morfological instability, also the antropic interference, where the iol industry is located, next Mossoró City, and also the salt exploration industry and the tendency of expantion of shrimp cultivation. This report had as objective the multitemporalgeoenvorimentalmonitoring of the region by recognizingin the field and analizingimages of orbital sensors of diferents years of last four decades. This analisys was achieved by Digital Images Procesing (DIP) thecnics, com subsidized, in a GIS, the preparion of Thematic Maps of natural resources (Geology, Geomorphology and Use & Ocupatios of Earth) and the Envorimental Sensivity to Oil Spilling, main objective os this project. Such technics constitute important tools of envoriment monitoring and maneging, indicating tendencies of antropic of natural growing, making possible the apropiated planning of development of the region, where the steps can be indicated minimized possibles envorimental impacts caused by antropics interferencies on the region, mainly those related to industrial activities, and oil industry above all. Researchs of this nature are very important to the analisys and ordered manegements of use and ocupation of coastal places

Monitoramento geoambiental do estuário do Rio Paraíba do Norte - PB por meio da cartografia temática digital e de produtos de sensoriamento remoto

The North Paraíba River Estuary, located in the eastern portion of the Paraíba State, Northeast Brazil, on coordinates 34º50 00 -34º57 30 S and 6º55 00 -7º7 30 W, constitutes a fluvio-marine plain formed by the North Paraíba River and its tributaries Sanhauá, Paroeira, Mandacaru, Tiriri, Tambiá, Ribeira and Guia. This estuary comprises an area of about 260 km2. Increasing human demands on the estuary area and inadequate environment managing have generated conflicts. The present work main purpose is to evaluate the geodynamic evolution of the North Paraíba River Estuary in the period from 1969 to 2001, using digital image processing techniques, thematic digital cartography and multitemporal data integration, combined to geological-geophysical field surveys. The SUDENE cartographic database, converted to digital format were, used to obtain occupation and topographic maps from 1969 and to generate a Digital Elevation Model (DEM). Digital Landsat 7 ETM+ and Spot HRVIR-PAN satellite images interpretation allowed the environmental characterization of the estuary. The most important digital processing results were achieved color composites RGB 5-4-3, 5-3-1, 5-2-NDWI and band ratio 7/4-5/3-4/2, 5/7-3/1-5/4). In addition the fusion image technique RGBI was used by the inclusion of the Spot HRVRI and Landsat 7 ETM+ panchromatic band on I layer with RGB triplets 5-4-3, 5-3-1 and 5/7-3/1-5/4. The DEM and digital images integration allowed the identification of seven geomorphological units: coastal tableland, flowing tray, tide plain, fluvial terrace, submerged dune, beach plain and beach). Both Side Scan Sonar and Echosound were used to analyse underwater surface and bedforms of the estuarine channel, sand predominance (fine to very fine) and 2D dune features 5 m wide and 0.5 m height. This investigation characterized the estuary as an environment dominated by regimen of average flow. The channel depth varies between 1 m and 11 m, being this last quota reached in the area of Porto de Cabedelo. The chanel estuary is relatively shallow, with erosion evidences mainly on its superior portion, attested by sand banks exposed during the low tide. Multitemporal digital maps from 1969 and 2001 integration were obtained through geoprocessing techniques, resulting the geodynamic evolution of the estuary based on landuse, DEM geomorphology and bathymetric maps

Efeitos da suplementação de fitase sobre a disponibilidade aparente de Mg, Ca, Zn, Cu, Mn e Fe em alimentos vegetais para a tilápia-do-nilo

Cem juvenis de tilápia-do-nilo (Oreochromis niloticus; PV = 100.0 ± 5.0 g) foram distribuídos em 10 tanques-rede com o objetivo de avaliar o efeito da suplementação da enzima fitase (0, 1.000 e 2.000 UFA/kg) sobre a disponibilidade de minerais em alguns alimentos energéticos (milho, milho extrusado, farelo de trigo, farelo de arroz e farelo de sorgo) e protéicos (farelo de soja extrusado, farelo de soja, farelo de girassol, farelo de algodão e glúten de milho) utilizados na alimentação de tilápia-do-nilo (Oreochromis niloticus). Para determinação dos coeficientes de disponibilidade aparente (CDA) do cálcio (Ca), magnésio (Mg), zinco (Zn), cobre (Cu), ferro (Fe) e manganês (Mn), foram confeccionadas 31 rações, marcadas com 0,10% de óxido de crômio III uma referência (ração purificada) e 30 contendo os dez alimentos e os diferentes níveis de suplementação da enzima fitase. O CDA dos nutrientes foi calculado com base no teor de crômio da ração e das fezes. A fitase aumenta, nos vegetais, a disponibilidade do Mg, Cu, Zn e Mn, os quais apresentam tendência diferenciada, em razão do seu valor biológico e do nível de suplementação de enzima.