Task Competency in the Rights Analytic: Mental Health and the Justification for Rights and Duties

The paper concerns the moral status of persons for the purposes of rights-holding and duty-bearing. Developing from Gewirth’s argument to the Principle of Generic Consistency (PGC) and Beyleveld et al.’s Principle of Precautionary Reasoning, I argue in favour of a capacity-based assessment of the task competencies required for choice-rights and certain duties (within the Hohfeldian analytic). Unlike other, traditional, theories of rights, I claim that precautionary reasoning as to agentic status holds the base justification for rights-holding. If this is the basis for generic legal rights, then the contingent argument must be used to explain communities of rights. Much in the same way as two ‘normal’ adult agents may not have equal rights to be an aeroplane pilot, not all adults hold the same task competencies in relation to the exercise of the generic rights to freedom derived from the PGC. In this paper, I set out to consider the rights held by children, persons suffering from mental illness and generic ‘full’ agents. In mapping the developing ‘portfolio’ of rights and duties that a person carries during their life we might better understand the legal relations of those who do not ostensibly fulfil the criteria of ‘full’ agent.

Using Modern Tools to Explain the Use of the Smith Chart

The concept of explaining the use of an old tool like the Smith chart, using modern tools like MATLAB [1] scripts in combination with e-learning facilities, is exemplified by two MATLAB scripts. These display, step by step, the graphical procedure that must be used to solve the double-stub impedance-matching problem. These two scripts correspond to two different possible ways to analyze this matching problem, and they are important for students to learn by themselves.

Fatores influenciadores da gestão da qualidade e independência do auditor: um estudo de caso

Dissertação apresentada ao Instituto Superior de Contabilidade para obtenção do Grau de Mestre em Auditoria Orientada por: Doutora Alcina Dias

Otimização do processo de projeto de uma ferramenta progressiva para a estampagem de componentes metálicos

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Mecânica

Desmonte de rocha com explosivos: importância da optimização

Este trabalho pretende avaliar e melhorar o modo de execução da aplicação da técnica de rebentamento com explosivos, aumentando a fragmentação e reduzindo o custo no conjunto das operações de perfuração, carga, detonação e fragmentação secundária e compreender a influência na variação do custo das operações face às melhorias adoptadas. A investigação foi executada na pedreira da Mota-Engil, Engenharia S.A. ‘’ Bouça do Menino’’ Vila Verde, Cervães, tendo os dados iniciais sido recolhidos em 2004 (ano de referência) e comparados com os seguintes 4 anos. A perfuração é geralmente um dos principais factores que influenciam o resultado de um rebentamento, já que do seu rigor pode depender a eficiência do explosivo. Hoje em dia, para além da adequação dos métodos de execução ao local a fragmentar, existem ferramentas que nos permitem visualizar com rigor as circunstâncias em que se desenvolvem os trabalhos, nomeadamente as utilizadas pelos equipamentos de perfuração para controlo de profundidade, inclinação e direcção, a utilização de feixes ‘’laser’’ que nos permitem manter o nivelamento das plataformas, o ‘’laser’’ profile que nos ajuda a definir o posicionamento e inclinação dos furos relativamente à frente livre antes de executar a perfuração, ou ainda, a utilização de equipamentos de registo de coordenadas que nos permitem verificar o posicionamento do furo após a sua execução e decidir sobre a sua utilização mais correcta em função da sua posição. A utilização destas ferramentas associadas a um ‘’software’’ de desenho é ainda uma excelente ferramenta de formação para os operadores da perfuração e utilização dos explosivos, já que permite visualizar e compreender a relação da posição dos furos com o resultado do rebentamento.

How new online communication tools and the availability of content influence the audiences and the creative process

We live in a changing world. At an impressive speed, every day new technological resources appear. We increasingly use the Internet to obtain and share information, and new online communication tools are emerging. Each of them encompasses new potential and creates new audiences. In recent years, we witnessed the emergence of Facebook, Twitter, YouTube and other media platforms. They have provided us with an even greater interactivity between sender and receiver, as well as generated a new sense of community. At the same time we also see the availability of content like it never happened before. We are increasingly sharing texts, videos, photos, etc. This poster intends to explore the potential of using these new online communication tools in the cultural sphere to create new audiences, to develop of a new kind of community, to provide information as well as different ways of building organizations’ memory. The transience of performing arts is accompanied by the need to counter that transience by means of documentation. This desire to ‘save’ events reaches its expression with the information archive of the different production moments as well as the opportunity to record the event and present it through, for instance, digital platforms. In this poster we intend to answer the following questions: which online communication tools are being used to engage audiences in the cultural sphere (specifically between theater companies in Lisbon)? Is there a new relationship with the public? Are online communication tools creating a new kind of community? What changes are these tools introducing in the creative process? In what way the availability of content and its archive contribute to the organization memory? Among several references, we will approach the two-way communication model that James E. Grunig & Todd T. Hunt (1984) already presented and the concept of mass self-communication of Manuel Castells (2010). Castells also tells us that we have moved from traditional media to a system of communication networks. For Scott Kirsner (2010), we have entered an era of digital creativity, where artists have the tools to do what they imagined and the public no longer wants to just consume cultural goods, but instead to have a voice and participate. The creativity process is now depending on the public choice as they wander through the screen. It is the receiver who owns an object which can be exchanged. Virtual reality has encouraged the receiver to abandon its position of passive observer and to become a participant agent, which implies a challenge to organizations: inventing new forms of interfaces. Therefore, we intend to find new and effective online tools that can be used by cultural organizations; the best way to manage them; to show how organizations can create a community with the public and how the availability of online content and its archive can contribute to the organizations’ memory.

Cutting forces and wear analysis of Si3N4 diamond coated tools in high speed machining

Si3N4 tools were coated with a thin diamond film using a Hot-Filament Chemical Vapour Deposition (HFCVD) reactor, in order to machining a grey cast iron. Wear behaviour of these tools in high speed machining was the main subject of this work. Turning tests were performed with a combination of cutting speeds of 500, 700 and 900 m min−1, and feed rates of 0.1, 0.25 and 0.4 mm rot−1, remaining constant the depth of cut of 1 mm. In order to evaluate the tool behaviour during the turning tests, cutting forces were analyzed being verified a significant increase with feed rate. Diamond film removal occurred for the most severe set of cutting parameters. It was also observed the adhesion of iron and manganese from the workpiece to the tool. Tests were performed on a CNC lathe provided with a 3-axis dynamometer. Results were collected and registered by homemade software. Tool wear analysis was achieved by a Scanning Electron Microscope (SEM) provided with an X-ray Energy Dispersive Spectroscopy (EDS) system. Surface analysis was performed by a profilometer.

Anti-vibration gloves and the forearm efforts during tools operations

The objective of this paper is to analyze the forearm muscular contraction levels associated to the use of anti-vibration gloves, by comparing the contraction levels with gloves and without gloves. Two different vibration tools were used in a simulated work environment: (1) A compact Duty Multi-Cutter Bosch and (2) and a Percussion Drill with a drill bit Ø20 mm. Standard operations were performed by each subject in the following materials: (1) Performing cross- sectional cuts in 80x40 mm pine section and (2) performing 20 mm diameter holes in a concrete slab 2 x 2 m, 70 mm thick. The forearm contraction level were measured by surface electromyography in four different muscles: Flexor Digitorum Superficialis (FDS), Flexor Carpi Ulnaris (FCU), Extensor Carpi Radialis Longus (ECRL) e Extensor Carpi Ulnaris (ECU). For the flexor muscles (FDS, FCU), an increase tendency in muscular contraction was observed when the operations are performed without gloves (2-5% MVE increase in the FDS and 3-9% MVE increase in the FCU). For the extensor muscles ECU a decrease tendency in muscular contraction was observed when the operations are performed without gloves (1-10% MVE decrease). Any tendency was found in the ECRL muscle. ECU was the muscle with the highest contraction level for 79% and 71% of the operators, during the operations respectively with the multi-cutter (P50= 27-30%MVE) and with the percussion drill (P50=46-55%MVE). As a final conclusion from this study, anti- vibration gloves may increase the forearm fatigue in the posterior region of the forearm (ECU muscle) during operations with the mentioned tools

Aplicação da filosofia Lean a um caso de estudo para otimização de processos de construção na pré-fabricação de peças de betão

Dissertação de Natureza Científica para obtenção do grau de Mestre em Engenharia Civil, perfil de Edificações

Downstream processing development of enveloped viruses for clinical applications: innovative tools for rational process optimization

Dissertation presented to obtain a Ph.D. degree in Engineering and Technology Sciences, Biotechnology at the Instituto de Tecnologia Química e Biológica, Universidade Nova de Lisboa

Adapting Meeting Tools to Agent Decision

Electricity markets are complex environments comprising several negotiation mechanisms. MASCEM (Multi- Agent System for Competitive Electricity Markets) is a simulator developed to allow deep studies of the interactions between the players that take part in the electricity market negotiations. ALBidS (Adaptive Learning Strategic Bidding System) is a multiagent system created to provide decision support to market negotiating players. Fully integrated with MASCEM it considers several different methodologies based on very distinct approaches. The Six Thinking Hats is a powerful technique used to look at decisions from different perspectives. This paper aims to complement ALBidS strategies usage by MASCEM players, providing, through the Six Thinking Hats group decision technique, a means to combine them and take advantages from their different perspectives. The combination of the different proposals resulting from ALBidS’ strategies is performed through the application of a Genetic Algorithm, resulting in an evolutionary learning approach.

Models and tools for value systems analysis in collaborative environments

Dissertation to obtain the degree of Doctor in Electrical and Computer Engineering, specialization of Collaborative Networks

Desenvolvimento de Frameworks de Testes Automáticos de Software

O objetivo deste trabalho é o desenvolvimento de frameworks de testes automáticos de software. Este tipo de testes normalmente está associado ao modelo evolucionário e às metodologias ágeis de desenvolvimento de software, enquanto que os testes manuais estão relacionados com o modelo em cascata e as metodologias tradicionais. Como tal foi efetuado um estudo comparativo sobre os tipos de metodologias e de testes existentes, para decidir quais os que melhor se adequavam ao projeto e dar resposta à questão "Será que realmente compensa realizar testes (automáticos)?". Finalizado o estudo foram desenvolvidas duas frameworks, a primeira para a implementação de testes funcionais e unitários sem dependências a ser utilizada pelos estagiários curriculares da LabOrders, e a segunda para a implementação de testes unitários com dependências externas de base de dados e serviços, a ser utilizada pelos funcionários da empresa. Nas últimas duas décadas as metodologias ágeis de desenvolvimento de software não pararam de evoluir, no entanto as ferramentas de automação não conseguiram acompanhar este progresso. Muitas áreas não são abrangidas pelos testes e por isso alguns têm de ser feitos manualmente. Posto isto foram criadas várias funcionalidades inovadoras para aumentar a cobertura dos testes e tornar as frameworks o mais intuitivas possível, nomeadamente: 1. Download automático de ficheiros através do Internet Explorer 9 (e versões mais recentes). 2. Análise do conteúdo de ficheiros .pdf (através dos testes). 3. Obtenção de elementos web e respetivos atributos através de código jQuery utilizando a API WebDriver com PHP bindings. 4. Exibição de mensagens de erro personalizadas quando não é possível encontrar um determinado elemento. As frameworks implementadas estão também preparadas para a criação de outros testes (de carga, integração, regressão) que possam vir a ser necessários no futuro. Foram testadas em contexto de trabalho pelos colaboradores e clientes da empresa onde foi realizado o projeto de mestrado e os resultados permitiram concluir que a adoção de uma metodologia de desenvolvimento de software com testes automáticos pode aumentar a produtividade, reduzir as falhas e potenciar o cumprimento de orçamentos e prazos dos projetos das organizações.

Cation transporters/channels in plants: Tools for nutrient biofortification

Cation transporters/channels are key players in a wide range of physiological functions in plants, including cell signaling, osmoregulation, plant nutrition and metal tolerance. The recent identification of genes encoding some of these transport systems has allowed new studies toward further understanding of their integrated roles in plant. This review summarizes recent discoveries regarding the function and regulation of the multiple systems involved in cation transport in plant cells. The role of membrane transport in the uptake, distribution and accumulation of cations in plant tissues, cell types and subcellular compartments is described. We also discuss how the knowledge of inter- and intra-species variation in cation uptake, transport and accumulation as well as the molecular mechanisms responsible for these processes can be used to increase nutrient phytoavailability and nutrients accumulation in the edible tissues of plants. The main trends for future research in the field of biofortification are proposed.