Production decisions and lot sizing for automotive stamping

A discrete event model was used to examine the effect of machine downtime and operating policy on the long-run average cost of an automotive stamping line. Operating policy refers to the selection of a target batch size and the circumstances under which a line stoppage will lead to the current batch being abandoned. It is assumed that the abandon/resume decision is based solely on the severity of the problem (i.e., repair cost) and the fraction of the batch completed. A method of identifying low-cost operating policies is presented using data obtained from a real stamping plant. It is found that, within a single part framework, this approach results in significantly lower average costs than are currently achieved. It is also demonstrated that by varying the model parameters it is possible to measure the potential benefits arising from process modifications (e.g., decreased die-set times). This can be used to identify the areas where improvements will have the greatest impact on cost and is particularly useful when assessing the expected return on a potential investment. A multiple-part extension to the model is suggested and the potential benefits discussed.

Environmentally sustainable food production and marketing : opportunity or hype?

Purpose: Identify and analyse the beliefs of value-chain intermediaries regarding the production and marketing of food products conforming to environmentally sustainable standards.

Methodology: In-depth, semi-structured, face-to-face interviews with senior managers of food companies across the value chain.

Findings: In Australia, the demand for foods that are produced under environmentally sustainable standards has been slow to take-off because (a) customers do not perceive these products as offering any special benefits (b) customers distrust the claims made by organisations (c) these products are much more expensive than traditional products, and (d) the implementation of environmental standards is expensive. Customers claim that the use of different terminologies such as organic, green and environmentally friendly in promoting
food products is confusing.

Research Limitations: Findings are not generalisable because the study is based on a small sample.

Practical Implications: Value-chain intermediaries are unlikely to voluntarily adopt environmental standards because of low demand for such foods and the high costs of adopting and monitoring environmentally sustainable production and marketing regimes.

Limitations of market driven sustainability : the case of environmental management systems for food production in Australia

Environmental Management Systems (EMSs) address environmental risks in supply chains and certification of environmental claims. Governments supporting EMSs have encouraged producers to respond to anticipated consumer environmental concerns. Attempts at implementing EMSs have rarely been in direct response to market demand but are usually farmer organisation driven – to forestall increased regulation. In Australia, consumer demand for foods produced to environmentally sustainable standards is minimal because consumers don’t believe these products offer special benefits. EMS implementation is expensive and onerous; and the products require a market premium. Food consumers have difficulty differentiating the terms organic, environmentally-friendly, and sustainably-produced in food labelling.

Efficient production of ZnO nanowires by a ball milling and annealing method

ZnO powder was mechanically milled in a ball mill. This procedure was found to greatly increase its evaporation ability. The anomalous evaporation behaviour was caused by the disordered structure of the milled material and was not related to the increase in its surface area after milling. ZnO nanowires were synthesized by evaporation of this milled precursor. Nanowires with smooth and rough surfaces were present in the sample; the latter morphology was dominant. A green emission band centred at 510 nm was dominant in the cathodoluminescence spectrum of the nanowires.

What is Chinese about Chinese businesses? Locating the 'rise of China' in global production networks

There is an implicit but commonly held assumption that Chinese businesses are distinctively Chinese. Casting them in unitary and national terms, this assumption has often provided the underpinnings for the conception of the strength of Chinese businesses as signs of an emerging China threat. Drawing on a global production networks (GPN) approach, this paper aims to question the assumption by arguing that many Chinese businesses, embedded in the expanding global and regional production networks, have taken on important transnational characteristics. Given these transnational connections, Chinese business networks in both 'Greater China' and China proper are characterized more by diversity and fragmentation than by cultural coherence and homogeneity. This analysis of the transnationalization and fragmentation of contemporary Chinese businesses helps better understand and respond to the complex challenge posed by the economic dynamism in China.

Fixers and foreign correspondents : news production and autonomy

The television foreign correspondent's licence to roam and generate news is increasingly under threat. This paper concentrates on the micro production processes of today s correspondent as he or she goes about the job of newsgathering 'on the road', and considers the changing nature of the correspondent's autonomy. It inserts the missing character in foreign newsgathering - the locally hired fixer - and explores how this person affects the correspondent's autonomy. An analysis of interviews with 20 foreign correspondents and five fixers leads to the conclusion that the foreign correspondent is rarely the sole editorial figure on the road but is instead the main actor representing the creative interplay of a succession of fixers or 'local producers'. This deconstruction of the ways in which a correspondent builds an ad-hoc newsgathering team each time he or she lands in d new place allows for a deeper understanding of the modus operandi of reporters.

Are oil shocks permanent or temporary? panel data evidence from crude oil and NGL production in 60 countries

This paper examines the unit root properties of crude oil production for 60 countries employing a range of panel data unit root tests for the period 1971 to 2003. The study first employs a number of panel data tests that do not accommodate structural breaks and then proceeds to apply the Lagrange Multiplier (LM) panel unit root test with one structural break. The results of the panel data tests without a structural break are inconclusive with at best mixed support for joint stationarity. The findings from the LM panel unit root test with a structural break, however, are conclusive, suggesting that for a world panel and smaller regional-based panels, crude oil and NGL production are jointly stationary.

The fine line between harm reduction and harm production - development of a clinical policy on femoral (groin) injecting

The femoral region ('groin') appears to be increasingly commonly used by injecting drug users in the UK. With the advent of Britain's first supervised prescribed injectable opioid treatment clinic, unprecedented decisions and judgements were required about the safe supervision of this practice, or whether to permit this behaviour on site at all. This paper reports the reasons for, and outcome of, development of a clinical policy on injecting into the deep femoral vein (groin injecting)

Current knowledge of the environmental influences on Australian cashmere production and quality

Goat fibre production is affected to a similar extent by genetic and environmental influences. Environmental influences include bio-geophysical factors (photoperiod, climate-herbage system and soil-plant trace nutrient composition), country of origin, nutrition factors (live weight, growth patterns) and management factors (farm, herd age and sex structure). Nutrition and management influences discussed include rate of stocking, energy nutrition, live weight change, parturition and management during shearing. The nutritional variation within and among years is the most important climatic factor influencing cashmere production, fibre diameter and fibre curvature (crimp). With productive cashmere goats, large responses to energy supplementation have been measured with optimum nutritional management. The effects and importance of management and hygiene during fibre harvesting (shearing) in producing quality fibre are emphasised.

Modeling and simulation for large scale production systems

Computer modeling and simulation provide a foundation upon which industrial processes and systems can be transformed and innovation dramatically accelerated. Computer modeling and simulation is also an indispensable tool of the information age, used extensively in design, analysis, operations, decision-making, optimization, and education and training. Manufacturing, production and design relies upon simulation to develop efficient production systems and factories that produce quality products. Simulation in industry has yet to meet its full potential. The development of models is very time consuming, particularly for geometries of complex engineering systems such as manufacturing plants, automobiles, aircraft and ships. Computer simulation allows scientists and engineers to understand and predict three-dimensional and time-dependent phenomena in science and engineering discipline. This talk will focus on challenges associated with modeling and simulation in the manufacturing sector and through a number of case studies highlight the benefits gained through the use of such technologies.

Isolation and characterization of polyunsaturated fatty acid producing Thraustochytrium species : screening of strains and optimization of omega-3 production

An isolation program targeting Thraustochytrids (marine fungoid protists) from 19 different Atlantic Canadian locations was performed. Sixty-eight isolates were screened for biomass, total fatty acid (TFA), eicosapentaenoic acid (EPA), and docosahexaenoic acid (DHA) content. Analysis of fatty acid methyl ester results discerned four distinctive clusters based on fatty acid profiles, with biomass ranging from 0.1 to 2.3 g L−1, and lipid, EPA, and DHA contents ranging from 27.1 to 321.14, 2.97 to 21.25, and 5.18 to 83.63 mg g−1 biomass, respectively. ONC-T18, was subsequently chosen for further manipulations. Identified using 18S rRNA gene sequencing techniques as a Thraustochytrium sp., most closely related to Thraustochytrium striatum T91-6, ONC-T18 produced up to 28.0 g L−1 biomass, 81.7% TFA, 31.4% (w/w biomass) DHA, and 4.6 g L−1 DHA under optimal fermentation conditions. Furthermore, this strain was found to produce the carotenoids and xanthophylls astaxanthin, zeaxanthin, canthaxanthin, echinenone, and β-carotene. Given this strain’s impressive productivity when compared to commercial strains, such as Schizochytrium sp. SR21 (which has only 50% TFA), coupled with its ability to grow at economical nitrogen and very low salt concentrations (2 g L−1), ONC-T18 is seen as an ideal candidate for both scale-up and commercialization.

Stimulation of cytokine production in human peripheral blood mononuclear cells by an aqueous Chlorella extract

CPE is an aqueous extract of the edible micro alga Chlorella pyrenoidosa, which has been shown to have immunostimulatory effects in vivo. In the present study, CPE was evaluated for an ability to stimulate cytokine production by human peripheral blood mononuclear cells (PBMC). PBMC from healthy individuals were treated ex vivo for 24 hours with 1, 10 and 100 μg/mL CPE. This resulted in a marked increase in the level of IL-10, a regulatory cytokine, and strong stimulation of the T-helper-1 (Th1) cell cytokines, IFN-γ and TNF-α. In contrast, stimulation of representative T-helper-2 (Th2) cell cytokines, IL-4 and IL-13, was minor. CPE (1, 10 or 100 μg/mL) did not cause a proliferation of human PBMC suggesting that enhanced secretion of cytokines was not secondary to an increase in cell number. We conclude that CPE stimulation of human PBMC induces a Th1-patterned cytokine response and a strong anti-inflammatory regulatory cytokine response, observations that await confirmation in vivo.