Hydrochemical evolution and groundwater flow processes in the Galilee and Eromanga basins, Great Artesian Basin, Australia: A multivariate statistical approach

The Galilee and Eromanga basins are sub-basins of the Great Artesian Basin (GAB). In this study, a multivariate statistical approach (hierarchical cluster analysis, principal component analysis and factor analysis) is carried out to identify hydrochemical patterns and assess the processes that control hydrochemical evolution within key aquifers of the GAB in these basins. The results of the hydrochemical assessment are integrated into a 3D geological model (previously developed) to support the analysis of spatial patterns of hydrochemistry, and to identify the hydrochemical and hydrological processes that control hydrochemical variability. In this area of the GAB, the hydrochemical evolution of groundwater is dominated by evapotranspiration near the recharge area resulting in a dominance of the Na–Cl water types. This is shown conceptually using two selected cross-sections which represent discrete groundwater flow paths from the recharge areas to the deeper parts of the basins. With increasing distance from the recharge area, a shift towards a dominance of carbonate (e.g. Na–HCO3 water type) has been observed. The assessment of hydrochemical changes along groundwater flow paths highlights how aquifers are separated in some areas, and how mixing between groundwater from different aquifers occurs elsewhere controlled by geological structures, including between GAB aquifers and coal bearing strata of the Galilee Basin. The results of this study suggest that distinct hydrochemical differences can be observed within the previously defined Early Cretaceous–Jurassic aquifer sequence of the GAB. A revision of the two previously recognised hydrochemical sequences is being proposed, resulting in three hydrochemical sequences based on systematic differences in hydrochemistry, salinity and dominant hydrochemical processes. The integrated approach presented in this study which combines different complementary multivariate statistical techniques with a detailed assessment of the geological framework of these sedimentary basins, can be adopted in other complex multi-aquifer systems to assess hydrochemical evolution and its geological controls.

Structural damage detection method using frequency response functions

Structural damage detection using measured dynamic data for pattern recognition is a promising approach. These pattern recognition techniques utilize artificial neural networks and genetic algorithm to match pattern features. In this study, an artificial neural network–based damage detection method using frequency response functions is presented, which can effectively detect nonlinear damages for a given level of excitation. The main objective of this article is to present a feasible method for structural vibration–based health monitoring, which reduces the dimension of the initial frequency response function data and transforms it into new damage indices and employs artificial neural network method for detecting different levels of nonlinearity using recognized damage patterns from the proposed algorithm. Experimental data of the three-story bookshelf structure at Los Alamos National Laboratory are used to validate the proposed method. Results showed that the levels of nonlinear damages can be identified precisely by the developed artificial neural networks. Moreover, it is identified that artificial neural networks trained with summation frequency response functions give higher precise damage detection results compared to the accuracy of artificial neural networks trained with individual frequency response functions. The proposed method is therefore a promising tool for structural assessment in a real structure because it shows reliable results with experimental data for nonlinear damage detection which renders the frequency response function–based method convenient for structural health monitoring.

Experimental and statistical investigation of Australian native plants for second-generation biodiesel production

This work explores the potential of Australian native plants as a source of second-generation biodiesel for internal combustion engines application. Biodiesels were evaluated from a number of non-edible oil seeds which are grow naturally in Queensland, Australia. The quality of the produced biodiesels has been investigated by several experimental and numerical methods. The research methodology and numerical model developed in this study can be used for a broad range of biodiesel feedstocks and for the future development of renewable native biodiesel in Australia.

Volatile organic compounds: Characteristics, distribution and sources in urban schools

Long term exposure to organic pollutants, both inside and outside school buildings may affect children’s health and influence their learning performance. Since children spend significant amount of time in school, air quality, especially in classrooms plays a key role in determining the health risks associated with exposure at schools. Within this context, the present study investigated the ambient concentrations of Volatile Organic Compounds (VOCs) in 25 primary schools in Brisbane with the aim to quantify the indoor and outdoor VOCs concentrations, identify VOCs sources and their contribution, and based on these; propose mitigation measures to reduce VOCs exposure in schools. One of the most important findings is the occurrence of indoor sources, indicated by the I/O ratio >1 in 19 schools. Principal Component Analysis with Varimax rotation was used to identify common sources of VOCs and source contribution was calculated using an Absolute Principal Component Scores technique. The result showed that outdoor 47% of VOCs were contributed by petrol vehicle exhaust but the overall cleaning products had the highest contribution of 41% indoors followed by air fresheners and art and craft activities. These findings point to the need for a range of basic precautions during the selection, use and storage of cleaning products and materials to reduce the risk from these sources.

Exploring and validating the internal dimensions of occupational stress: Evidence from construction cost estimators in China

A recurring feature of modern practice is occupational stress of project professionals, with both debilitating effects on the people concerned and indirectly affecting project success. Previous research outside the construction industry has involved the use of a psychology perceived stress questionnaire (PSQ) to measure occupational stress, resulting in the identification of one stressor – demand - and three sub-dimensional emotional reactions in terms of worry, tension and joy. The PSQ is translated into Chinese with a back translation technique and used in a survey of young construction cost professionals in China. Principal component analysis and confirmatory factor analysis are used to test the divisibility of occupational stress - little mentioned in previous research on stress in the construction context. In addition, structural equation modelling is used to assess nomological validity by testing the effects of the three dimensions on organizational commitment, the main finding of which is that lack of joy has the sole significant effect. The three-dimensional measurement framework facilitates the standardizing measurement of occupational stress. Further research will establish if the findings are also applicable in other settings and explore the relations between stress dimensions and other managerial concepts.

Differentiation of cultivars of flos chrysanthemum with the use of high-performance liquid chromatography fingerprints and chemometrics

Flos Chrysanthemum is a generic name for a particular group of edible plants, which also have medicinal properties. There are, in fact, twenty to thirty different cultivars, which are commonly used in beverages and for medicinal purposes. In this work, four Flos Chrysanthemum cultivars, Hangju, Taiju, Gongju, and Boju, were collected and chromatographic fingerprints were used to distinguish and assess these cultivars for quality control purposes. Chromatography fingerprints contain chemical information but also often have baseline drifts and peak shifts, which complicate data processing, and adaptive iteratively reweighted, penalized least squares, and correlation optimized warping were applied to correct the fingerprint peaks. The adjusted data were submitted to unsupervised and supervised pattern recognition methods. Principal component analysis was used to qualitatively differentiate the Flos Chrysanthemum cultivars. Partial least squares, continuum power regression, and K-nearest neighbors were used to predict the unknown samples. Finally, the elliptic joint confidence region method was used to evaluate the prediction ability of these models. The partial least squares and continuum power regression methods were shown to best represent the experimental results.

Runs of homozygosity and a cluster of vulvar cancer in young Australian Aboriginal women

Objective A cluster of vulvar cancer exists in young Aboriginal women living in remote communities in Arnhem Land, Australia. A genetic case–control study was undertaken involving 30 cases of invasive vulvar cancer and its precursor lesion, high-grade vulvar intraepithelial neoplasia (VIN), and 61 controls, matched for age and community of residence. It was hypothesized that this small, isolated population may exhibit increased autozygosity, implicating recessive effects as a possible mechanism for increased susceptibility to vulvar cancer. Methods Genotyping data from saliva samples were used to identify runs of homozygosity (ROH) in order to calculate estimates of genome-wide homozygosity. Results No evidence of an effect of genome-wide homozygosity on vulvar cancer and VIN in East Arnhem women was found, nor was any individual ROH found to be significantly associated with case status. This study found further evidence supporting an association between previous diagnosis of CIN and diagnosis of vulvar cancer or VIN, but found no association with any other medical history variable. Conclusions These findings do not eliminate the possibility of genetic risk factors being involved in this cancer cluster, but rather suggest that alternative analytical strategies and genetic models should be explored.

Acoustic classification of Australian anurans using syllable features

Acoustic classification of anurans (frogs) has received increasing attention for its promising application in biological and environment studies. In this study, a novel feature extraction method for frog call classification is presented based on the analysis of spectrograms. The frog calls are first automatically segmented into syllables. Then, spectral peak tracks are extracted to separate desired signal (frog calls) from background noise. The spectral peak tracks are used to extract various syllable features, including: syllable duration, dominant frequency, oscillation rate, frequency modulation, and energy modulation. Finally, a k-nearest neighbor classifier is used for classifying frog calls based on the results of principal component analysis. The experiment results show that syllable features can achieve an average classification accuracy of 90.5% which outperforms Mel-frequency cepstral coefficients features (79.0%).

Speeding up AdaBoost Classifier with Random Projection

The development of techniques for scaling up classifiers so that they can be applied to problems with large datasets of training examples is one of the objectives of data mining. Recently, AdaBoost has become popular among machine learning community thanks to its promising results across a variety of applications. However, training AdaBoost on large datasets is a major problem, especially when the dimensionality of the data is very high. This paper discusses the effect of high dimensionality on the training process of AdaBoost. Two preprocessing options to reduce dimensionality, namely the principal component analysis and random projection are briefly examined. Random projection subject to a probabilistic length preserving transformation is explored further as a computationally light preprocessing step. The experimental results obtained demonstrate the effectiveness of the proposed training process for handling high dimensional large datasets.

Investigating physical properties of solid dosage forms during pharmaceutical processing : Process analytical applications of vibrational spectroscopy

In order to improve and continuously develop the quality of pharmaceutical products, the process analytical technology (PAT) framework has been adopted by the US Food and Drug Administration. One of the aims of PAT is to identify critical process parameters and their effect on the quality of the final product. Real time analysis of the process data enables better control of the processes to obtain a high quality product. The main purpose of this work was to monitor crucial pharmaceutical unit operations (from blending to coating) and to examine the effect of processing on solid-state transformations and physical properties. The tools used were near-infrared (NIR) and Raman spectroscopy combined with multivariate data analysis, as well as X-ray powder diffraction (XRPD) and terahertz pulsed imaging (TPI). To detect process-induced transformations in active pharmaceutical ingredients (APIs), samples were taken after blending, granulation, extrusion, spheronisation, and drying. These samples were monitored by XRPD, Raman, and NIR spectroscopy showing hydrate formation in the case of theophylline and nitrofurantoin. For erythromycin dihydrate formation of the isomorphic dehydrate was critical. Thus, the main focus was on the drying process. NIR spectroscopy was applied in-line during a fluid-bed drying process. Multivariate data analysis (principal component analysis) enabled detection of the dehydrate formation at temperatures above 45°C. Furthermore, a small-scale rotating plate device was tested to provide an insight into film coating. The process was monitored using NIR spectroscopy. A calibration model, using partial least squares regression, was set up and applied to data obtained by in-line NIR measurements of a coating drum process. The predicted coating thickness agreed with the measured coating thickness. For investigating the quality of film coatings TPI was used to create a 3-D image of a coated tablet. With this technique it was possible to determine coating layer thickness, distribution, reproducibility, and uniformity. In addition, it was possible to localise defects of either the coating or the tablet. It can be concluded from this work that the applied techniques increased the understanding of physico-chemical properties of drugs and drug products during and after processing. They additionally provided useful information to improve and verify the quality of pharmaceutical dosage forms

Volatile components associated with bacterial spoilage of tropical prawns

Analysis of headspace volatiles by gas chromatography/mass spectrometry from king (Penaeus plebejus), banana (P. merguiensis), tiger (P. esculentus/semisulcatus) and greasy (Metapenaeus bennettae) prawns stored in ice or ice slurry, which is effectively an environment of low oxygen tension, indicated the presence of amines at the early stages of storage (less than 8 days) irrespective of the nature of the storage media. Esters were more prevalent in prawns stored on ice (normal oxygen conditions) at the latter stages of storage (more than 8 days) and were only produced by Pseudomonas fragi, whereas sulphides and amines occurred whether the predominant spoilage organism was Ps.fragi or Shewanella putrefaciens. The free amino acid profiles of banana and king prawns were high in arginine (12–14%) and low in cysteine (0.1–0.17%) and methionine (0.1–0.2%). Filter sterilised raw banana prawn broth inoculated with a total of 15 cultures of Ps. fragi and S. putrefaciens and incubated for two weeks at 5°C, showed the presence of 17 major compounds in the headspace volatiles analysed using gas chromatography/mass spectrometry (GC/MS). These were mainly amines, sulphides, ketones and esters. Principal Component Analysis of the results for the comparative levels of the volatiles produced by pure cultures, inoculated into sterile prawn broth, indicated three subgroupings of the organisms; I, Ps. fragi from a particular geographic location; II, S. putrefaciens from another geographic location; and III, a mixture of Ps. fragi and S. putrefaciens from different geographic locations. The sensory impression created by the cultures was strongly related to the chemical profile as determined by GC/MS. Organisms, even within the same subgrouping classified as identical by the usual tests, produced a different range of volatiles in the same uniform substrate.

Assessment of quality defects in macadamia kernels using NIR spectroscopy

Spectral data were collected of intact and ground kernels using 3 instruments (using Si-PbS, Si, and InGaAs detectors), operating over different areas of the spectrum (between 400 and 2500 nm) and employing transmittance, interactance, and reflectance sample presentation strategies. Kernels were assessed on the basis of oil and water content, and with respect to the defect categories of insect damage, rancidity, discoloration, mould growth, germination, and decomposition. Predictive model performance statistics for oil content models were acceptable on all instruments (R2 > 0.98; RMSECV < 2.5%, which is similar to reference analysis error), although that for the instrument employing reflectance optics was inferior to models developed for the instruments employing transmission optics. The spectral positions for calibration coefficients were consistent with absorbance due to the third overtones of CH2 stretching. Calibration models for moisture content in ground samples were acceptable on all instruments (R2 > 0.97; RMSECV < 0.2%), whereas calibration models for intact kernels were relatively poor. Calibration coefficients were more highly weighted around 1360, 740 and 840 nm, consistent with absorbance due to overtones of O-H stretching and combination. Intact kernels with brown centres or rancidity could be discriminated from each other and from sound kernels using principal component analysis. Part kernels affected by insect damage, discoloration, mould growth, germination, and decomposition could be discriminated from sound kernels. However, discrimination among these defect categories was not distinct and could not be validated on an independent set. It is concluded that there is good potential for a low cost Si photodiode array instrument to be employed to identify some quality defects of intact macadamia kernels and to quantify oil and moisture content of kernels in the process laboratory and for oil content in-line. Further work is required to examine the robustness of predictive models across different populations, including growing districts, cultivars and times of harvest.

Classification and rating of strong-motion earthquake records

Ninety-two strong-motion earthquake records from the California region, U.S.A., have been statistically studied using principal component analysis in terms of twelve important standardized strong-motion characteristics. The first two principal components account for about 57 per cent of the total variance. Based on these two components the earthquake records are classified into nine groups in a two-dimensional principal component plane. Also a unidimensional engineering rating scale is proposed. The procedure can be used as an objective approach for classifying and rating future earthquakes.

Laatutyöhön sitoutumisen edellytykset ammattikorkeakoulussa

The goal of this research was to establish the necessary conditions under which individuals are prepared to commit themselves to quality assurance work in the organisation of a Polytechnic. The conditions were studied using four main concepts: awareness of quality, commitment to the organisation, leadership and work welfare. First, individuals were asked to describe these four concepts. Then, relationships between the concepts were analysed in order to establish the conditions for the commitment of an individual towards quality assurance work (QA). The study group comprised the entire personnel of Helsinki Polytechnic, of which 341 (44.5%) individuals participated. Mixed methods were used as the methodological base. A questionnaire and interviews were used as the research methods. The data from the interviews were used for the validation of the results, as well as for completing the analysis. The results of these interviews and analyses were integrated using the concurrent nested design method. In addition, the questionnaire was used to separately analyse the impressions and meanings of the awareness of quality and leadership, because, according to the pre-understanding, impressions of phenomena expressed in terms of reality have an influence on the commitment to QA. In addition to statistical figures, principal component analysis was used as a description method. For comparisons between groups, one way variance analysis and effect size analysis were used. For explaining the analysis methods, forward regression analysis and structural modelling were applied. As a result of the research it was found that 51% of the conditions necessary for a commitment to QA were explained by an individual’s experience/belief that QA was a method of development, that QA was possible to participate in and that the meaning of quality included both product and process qualities. If analysed separately, other main concepts (commitment to the organisation, leadership and work welfare) played only a small part in explaining an individual’s commitment. In the context of this research, a structural path model of the main concepts was built. In the model, the concepts were interconnected by paths created as a result of a literature search covering the main concepts, as well as a result of an analysis of the empirical material of this thesis work. The path model explained 46% of the necessary conditions under which individuals are prepared to commit themselves to QA. The most important path for achieving a commitment stemmed from product and system quality emanating from the new goals of the Polytechnic, moved through the individual’s experience that QA is a method of the total development of quality and ended in a commitment to QA. The second most important path stemmed from the individual’s experience of belonging to a supportive work community, moved through the supportive value of the job and through affective commitment to the organisation and ended in a commitment to QA. The third path stemmed from an individual’s experiences in participating in QA, moved through collective system quality and through these to the supportive value of the job to affective commitment to the organisation and ended in a commitment to QA. The final path in the path model stemmed from leadership by empowerment, moved through collective system quality, the supportive value of the job and an affective commitment to the organisation, and again, ended in a commitment to QA. As a result of the research, it was found that the individual’s functional department was an important factor in explaining the differences between groups. Therefore, it was found that understanding the processing of part cultures in the organisation is important when developing QA. Likewise, learning-teaching paradigms proved to be a differentiating factor. Individuals thinking according to the humanistic-constructivistic paradigm showed more commitment to QA than technological-rational thinkers. Also, it was proved that the QA training program did not increase commitment, as the path model demonstrated that those who participated in training showed 34% commitment, whereas those who did not showed 55% commitment. As a summary of the results it can be said that the necessary conditions under which individuals are prepared to commit themselves to QA cannot be treated in a reductionistic way. Instead, the conditions must be treated as one totality, with all the main concepts interacting simultaneously. Also, the theoretical framework of quality must include its dynamic aspect, which means the development of the work of the individual and learning through auditing. In addition, this dynamism includes the reflection of the paradigm of the functions of the individual as well as that of all parts of the organisation. It is important to understand and manage the various ways of thinking and the cultural differences produced by the fragmentation of the organisation. Finally, it seems possible that the path model can be generalised for use in any organisation development project where the personnel should be committed.

Laadukasta yliopisto-opetusta kehittämässä : Laadukkaan yliopisto-opetuksen kehittäminen ja yliopistopedagogisen koulutuksen yhteys opetuksen kehittämiseen Helsingin yliopiston opettajilla

Objectives. The purpose of this study was to examine the development of high-quality university teaching among the teachers of the University of Helsinki. Furthermore, the relation of university pedagogical training to development of teaching was analyzed. This study introduces a new perspective to the research of quality of university teaching by considering quality from the teaching development perspective. The individual level examination was done from teacher's perspective. The development of high-quality university teaching was approached through three factors of teaching development defined by Biggs (2003). These factors are 1) the level of thinking about teaching on which the teaching development is based on (can also be called the quality model), 2) the methods for and 3) the impediments to teaching development. The research of Trigwell and Prosser (1996), Lindblom-Ylänne, Nevgi and Postareff (2004) and Postareff, Lindblom-Ylänne and Nevgi (2007) and the ideas of Ramsden (1992) have been central sources to this study. Methods. This study was a survey study. The data was collected with an electronic questionnaire in the spring of 2007. The sample consisted of 655 person of which some had and some had not university pedagogical training. Total of 251 answered the study. The data was mainly analyzed with SPSS statistical programme. Item analysis, principal component analysis, nonparametric Kruskal-Wallis and Mann-Whitney tests, correlation and crosstabulation were the methods used to analyze the data. Results and conclusions. According to the results it seems that the teachers of the University of Helsinki have good basis for developing high-quality university teaching. The 3rd level of thinking about teaching, which emphasizes student-centred features, could be identified on majority of the teachers. The use of teaching development methods was comprehensive. Most frequently used methods were related to the enhancement of content knowledge. In general the impediments to teaching development were not considered to be very significant. The most significant impediments were the factors related to lack of appreciation of teaching and factors related to lack of time meant for the planning and developing of teaching. Differences were found according to sex, teaching experience, degree, position and faculty. This study also showed that university pedagogical training seems to have a positive relation to the development of high-quality university teaching among the teachers of University of Helsinki. According to the results when the amount of teachers university pedagogical training increased, the 3rd level of thinking about teaching could be identified more often. Teachers also used more often teaching development methods related to cooperation and active participation and enhancement of pedagogical skills. Furthermore, they considered the factors related to lack of pedagogical skills and motivation to be lesser impediments to teaching development.