Efeito da adição de feldspato e/ou resíduo de caulin em formulações à base de argila ilítica

The red pottery industry in Piauí state is well developed and stands out at the national context for the technical quality of its products. The floor and wall tile industry, however, is little developed since the state has only one company that produces red clay-based ceramic tiles. This thesis aims at using the predominantly illitic basic mass of the above mentioned industry, with the addition of feldspar and/or kaolin residue in order to obtain products of higher technical quality. Kaolin residue consists basically of kaolinite, muscovite mica and quartz; the feldspar used was potassic. In this experiment, basic mass (MB) was used for experimental control and fifteen formulations codified as follows: F2, F4, F8, F16, F32, FR2, FR4, FR8, FR16, FR32, R2, R4, R8, R16 and R32. All raw materials were dry-milled, classified, formulated and then humidified to 10% water. Thereafter, test samples were produced by unixial pressing process in a rectangular steel matrix (60.0 x 20.0 x 5.0) mm3 at (25 MPa). They were fired at four temperatures: 1080°C, 1120°C, 1160°C, with a heating rate of 10°C/min during up to 10 min in an electric oven, and the last one in an industrial oven with a peak of 1140°C, aim ing to confirm the results found in laboratory and, finally, technological tests were performed: MEA, RL, AA, PA, TRF and PF. The results revealed that the residue under study can be considered a raw material with large potential in the industry of red clay-based ceramic tiles, since the results found both in laboratory and in the industry have shown that the test samples produced from the formulations with up to 4% feldspar and those produced with up to 8% feldspar and residue permitted a reduction in the water absorption rate and an increase in the mechanical resistance while those samples produced with up to 4% residue had an increase in the mechanical resistance when compared to those produced from the basic mass and that the formulation with 2% feldspar and residue presented the best technological properties, lowering the sintering temperature down to 1120°C

Uso de resíduo e de minerais de pegmatito da região do seridó RN e de argilas portuguesas em formulações de grês porcelanato

In the State Rio Grande do Norte, Brazil, the most significant deposits of minerals in the production of granite and pegmatite are Seridó region. Municipalities of Parelhas and Equador are the main responsible for the production of feldspar, quartz, kaolin and granite. The ceramic industries are always in search of competitiveness by investing in new products or improving existing techniques. The stoneware is a type of pottery that stands in the market because it presents technical and aesthetic characteristics superior to other existing products. Characteristics of the raw materials initially obtained with chemical analysis and mineralogical analysis are crucial in getting a product that satisfies the conditions in a manufacturing process and is, in principle, directly related to the firing cycle. This research aimed at developing new formulations for the mass production of ceramic stoneware. The raw materials initially characterized were feldspar, quartz, kaolin and granite. As part of the research was developed at the University of Aveiro, in Portugal, we used two clays used in the production of Portuguese ceramics. The raw material Brazilian and Portuguese and the final product, both in Portugal and Brazil, were analyzed for X-ray fluorescence, X-ray diffraction, granulometric analysis, dilatometric analysis, thermal analysis and analysis of scanning electron microscopy (MEV). The specimens prepared at the University of Aveiro (DECV) were sintered at 10000C and 12000C and the specimens prepared in UFRN were sintered at 10000C, 10500C, 11000C, 11500C, 12000C, 12500C and 13000C, but the best results and demonstrating the presence of the mineral mullite were at temperatures of 12000C, 12500C and 13000C. The results showed that the granite waste used may be considered raw material of excellent quality for use in the ceramic industry and coating floors and more accurately by the industry of stoneware. Physical and mechanical tests conducted on samples of the formulations F01 and F02 developed in UFRN showed a water absorption and mechanical strength suitable for the stoneware

Estudo de massa cerâmica triaxial visando à otimização do ciclo de queima da indústria de cerâmica estrutural

Over recent years the structural ceramics industry in Brazil has found a very favorable market for growth. However, difficulties related to productivity and product quality are partially inhibiting this possible growth. An alternative for trying to solve these problems and, thus, provide the pottery industry the feasibility of full development, is the substitution of firewood used in the burning process by natural gas. In order to contribute to this process of technological innovation, this paper studies the effect of co-use of ceramic phyllite and kaolin waste on the properties of a clay matrix, verifying the possible benefits that these raw materials can give to the final product, as well as the possibility of such materials to reduce the heat load necessary to obtain products with equal or superior quality. The study was divided into two steps: characterization of materials and study of formulations. Two clays, a phyllite and a residue of kaolin were characterized by the following techniques: laser granulometry, plasticity index by Atterberg limits, X-ray fluorescence, X-ray diffraction, mineralogical composition by Rietveld, thermogravimetric and differential thermal analysis. To study the formulations, specifically for evaluation of technological properties of the parts, was performed an experimental model that combined planning involving a mixture of three components (standard mass x phyllite x kaolin waste) and a 23 factorial design with central point associated with thermal processing parameters. The experiment was performed with restricted strip-plot randomization. In total, 13 compositional points were investigated within the following constraints: phyllite ≤ 20% by weight, kaolin waste ≤ 40% by weight, and standard mass ≥ 60% by weight. The thermal parameters were used at the following levels: 750 and 950 °C to the firing temperature, 5 and 15 °C/min at the heating rate, 15 and 45min to the baseline. The results showed that the introduction of phyllite and/or kaolin waste in ceramic body produced a number of benefits in properties of the final product, such as: decreased absorption of water, apparent porosity and linear retraction at burn; besides the increase in apparent specific mass and mechanical properties of parts. The best results were obtained in the compositional points where the sum of the levels of kaolin waste and phyllite was maximal (40% by weight), as well as conditions which were used in firing temperatures of 950 °C. Regarding the prospect of savings in heat energy required to form the desired microstructure, the phyllite and the residue of kaolin, for having small particle sizes and constitutions mineralogical phases with the presence of fluxes, contributed to the optimization of the firing cycle.

Tecnologia e funcionalidade das peças esquiroladas do Paleolítico Superior de Vale Boi, Vila do Bispo

Dissertação de Mestrado, Arqueologia, Faculdade de Ciências Humanas e Sociais, Universidade do Algarve, 2016

Avaliação da incorporação combinada dos resíduos de cascalho de perfuração de poço de petróleo e de polimento do porcelanato em cerâmica vermelha

Among the industries, those that produce ceramic porcelain for use in construction industry and oil, during the exploration and production period, play an important role in the production of waste. Much research has been carried out both by academia and the productive sector, sometimes reintroducing them in the same production line that generated them, sometimes in areas unrelated to their generation, as in the production of concrete and mortar for the construction, for example, but each one in an isolated way. In this research, the aim is to study the combined incorporation of the waste drill cuttings of oil well and the residue of the polishing of porcelain, generated in the final stage of finishing of this product in a clay matrix, for the production of red pottery, specifically bricks, ceramic blocks and tiles. The clay comes from the municipality of São Gonçalo, RN, the drilling waste is from the Natal basin, in Rio Grande do Norte, and the residue of the polishing proceeds from a ceramic porcelain of the State of Paraíba. For this purpose, we used a mixture of a plastic clay with a non-plastic, in a ratio of 50% each, settling formulations with the addition of these two residues in this clay matrix. In the formulations, both residues were incorporated with a minimum percentage of 2.5% and maximum of 12.5%, varying from 2.5% each, in each formulation, which the sum of the waste be no more than 15%. It should be noted that the residue of the polishing of ceramic porcelain is a IIa class (not inert). The materials were characterized by XRF, XRD, TG, DTA, laser granulometry and the plasticity index. The technological properties of water absorption, apparent porosity, linear shrinkage of burning, flexural tensile strength and bulk density were evaluated after the sintering of the pieces to 850 °C, 950 °C and 1050 °C, with a burning time of 3 hr, 3 hr and 30 minutes, and 3 hr and 50 minutes, respectively, with a heating rate of 10 °C/minute, for all formulations and landing of 30 minutes. To better understand the influence of each residue and temperature on the evaluated properties, we used the factorial planning and its surfaces of response for the interpretation of the results. It was found that the temperature has no statistical significance at a 95% of reliability level in flexural tensile strength and that it decreases the water absorption and the porosity, but increases the shrinkage and the bulk density. The results showed the feasibility of the desired incorporation, but adjusting the temperature to each product and formulation, and that the temperatures of 850 °C and 950 °C were the one that responded to the largest number of formulations

Evaluación de la extracción de plomo y cadmio de vajilla cerámica vidriada

Se evalúa si una sola extracción, mediante la aplicación de un método de ensayo normalizado que simula condiciones extremas de uso, permite determinar el contenido total de plomo y cadmio presente en piezas de vajilla cerámica que entran en contacto con los alimentos y su implicación en el resultado analítico. Se aplicó el método de ensayo varias veces sobre materiales de referencia de cerámica con diferentes concentraciones iniciales de plomo y el cadmio para cuantificar la liberación sucesiva de ambos metales. El lixiviado en cada aplicación se analizó por absorción atómica. Los resultados mostraron que una sola aplicación del método de ensayo no extrae todo el plomo y el cadmio en la vajilla cerámica. Se observaron liberaciones posteriores para todas las piezas de cerámica a prueba con diferente concentración inicial. Para cadmio se registraron las siguientes variaciones en las extracciones: 40 a 95% en la primera extracción, de 0 a 28% en la segunda, de 0.2 hasta 21% en la tercera, y de 1 a 40% en la cuarta. Para el plomo, se registraron los subsiguientes valores en los lixiviados entre el 50 y el 93% en la primera prueba, entre el 2 y el 24% en la segunda, entre el 2 y el 18% en la tercera y entre el 2 y el 17% en la cuarta extracción. Los resultados revelan que la cantidad total de plomo y cadmio liberado en una sola prueba estándar no reflejan el contenido total de plomo y cadmio que las piezas de cerámica liberan a largo plazo después de su uso.

El relevo de género en la elaboración alfarera. El caso de las comunidades Guaitil y San Vicente, provincia de Guanacaste, Costa Rica

Resumen El artículo presenta un breve recorrido por la historia reciente de las comunidades alfareras costarricenses de Guaitil y San Vicente, en la región Chorotega. Profundiza en el cambio intergeneracional y el relevo de género que comprometen el mantenimiento de esta tradición ancestral. Asimismo introduce la importancia que tienen los sellos de calidad diferenciada por territorio, como las denominaciones de origen (DO): una herramienta de rescate, valoración y protección de estos saberes culturales. El aporte al conocimiento de la actividad alfarera en Guaitil y San Vicente presenta datos de un censo realizado por el centro especializado CadenAgro de la Universidad Nacional de Costa Rica (UNA) en los talleres artesanos. La información obtenida muestra un panorama para la gestión a largo plazo de la DO que garantice el mantenimiento de las prácticas culturales de las comunidades artesanas. Abstract The article presents a brief overview of the recent history of potter Costa Rican communities Guaitil and San Vicente, in the Chorotega region. It deepen is intergenerational change and gender relay involving the maintenance of this ancient tradition. It also introduces the importance of quality labels differentiated by territory, as designations of origin (DO): a rescue tool, valuation and protection of this cultural knowledge. The contribution to knowledge of the activity of pottery in San Vicente and Guaitil presents data from a census conducted by the specialized center CadenAgro of the National University of Costa Rica (UNA) in artisan workshops. The information obtained shows an overview for long-term management of DO to ensure the maintenance of the cultural practices of artisan communities.

Libs in cultural heritage: recognition and identification of objects in an underwater archaeological shipwreck

Nowadays, one of the most important areas of interest in archeology is the characterization of the submersed cultural heritage. Mediterranean Sea is rich in archaeological findings due to storms, accidents and naval battles since prehistoric times. Chemical analysis of submerged materials is an extremely valuable source of information on the origin and precedence of the wrecks, and also the raw materials employed during the manufacturing of the objects found in these sites. Nevertheless, sometimes it is not possible to extract the archaeological material from the marine environment due to size of the sample, the legislation or preservation purposes. In these cases, the in-situ analysis turns into the only alternative for obtaining information. In spite of this demand, no analytical techniques are available for the in-situ chemical characterization of underwater materials. The versatility of laser-induced breakdown spectroscopy (LIBS) has been successfully tested in oceanography 1. Advantages such as rapid and in situ analysis with no sample preparation make LIBS a suitable alternative for field measurements. To further exploit the inherent advantages of the technology, a mobile fiber-based LIBS platform capable of performing remote measurements up to 50 meters range has been designed for the recognition and identification of artworks in underwater archaeological shipwrecks. The LIBS prototype featured both single-pulse (SP-LIBS) and multi-pulse excitation (MP-LIBS) 2. The use of multi-pulse excitation allowed an increased laser beam energy (up to 95 mJ) transmitted through the optical fiber. This excitation mode results in an improved performance of the equipment in terms of extended range of analysis (to a depth of 50 m) and a broader variety of samples to be analyzed (i.e., rocks, marble, ceramics and concrete). In the present work, the design and construction considerations of the instrument are reported and its performance is discussed on the basis of the spectral response, the remote irradiance achieved upon the range of analysis and its influence on plasma properties, as well as the effect of the laser pulse duration and purge gas to the LIBS signal. Also, to check the reliability and reproducibility of the instrument for field analysis several robustness tests were performed outside the lab. Finally, the capability of this instrument was successfully demonstrated in an underwater archaeological shipwreck (San Pedro de Alcántara, Malaga).

The Potteries of Persia : being a brief history of the art of ceramics in the Near East /

Mode of access: Internet.

Volcanic processes and human exposure as elements to build a risk model for Volcan de Fuego, Guatemala

The activity of Fuego volcano during the 1999 - 2013 eruptive episode is studied through field, remote sensing and observatory records. Mapping of the deposits allows quantifying the erupted volumes and areas affected by the largest eruptions during this period. A wide range of volcanic processes results in a diversity of products and associated deposits, including minor airfall tephra, rockfall avalanches, lava flows, and pyroclastic flows. The activity can be characterized by long term, low level background activity, and sporadic larger explosive eruptions. Although the background activity erupts lava and ash at a low rate (~ 0.1 m3/s), the persistence of such activity over time results in a significant contribution (~ 30%) to the eruption budget during the studied period. Larger eruptions produced the majority of the volume of products during the studied period, mainly during three large events (May 21, 1999, June 29, 2003, and September 13, 2012), mostly in the form of pyroclastic flows. A total volume of ~ 1.4 x 108 m3 was estimated from the mapped deposits and the estimated background eruption rate. Posterior remobilization of pyroclastic flow material by stream erosion in the highly confined Barranca channels leads to lahar generation, either by normal rainfall, or by extreme rainfall events. A reassessment of the types of products and volumes erupted during the decade of 1970's allows comparing the activity happening since 1999 with the older activity, and suggests that many of the eruptive phenomena at Fuego may have similar mechanisms, despite the differences in scale between. The deposits of large pyroclastic flows erupted during the 1970's are remarkably similar in appearance to the deposit of pyroclastic flows from the 1999 - 2013 period, despite their much larger volume; this is also the case for prehistoric eruptions. Radiocarbon dating of pyroclastic flow deposits suggests that Fuego has produced large eruptions many times during the last ~ 2 ka, including larger eruptions during the last 500 years, which has important hazard implications. A survey was conducted among the local residents living near to the volcano, about their expectations of possible future crises. The results show that people are aware of the risk they could face in case of a large eruption, and therefore they are willing to evacuate in such case. However, their decision to evacuate may also be influenced by the conditions in which the evacuation could take place. If the evacuation represents a potential loss of their livelihood or property they will be more hesitant to leave their villages during a large eruption. The prospect of facing hardship conditions during the evacuation and in the shelters may further cause reluctance to evacuate. A short discussion on some of the issues regarding risk assessment and management through an early warning system is presented in the last chapter.

Criar e participar : uma análise ao envolvimento em projetos artístico-culturais no Instituto Federal de Brasília - Campus Planaltina

Dissertação apresentada para obtenção do grau de mestre em Educação Social e Intervenção Comunitária

La datation du site Mailhot-Curran : application de la luminescence optique sur des poteries iroquoiennes du Saint-Laurent

La luminescence optique (OSL) a été mesurée sur dix-sept fragments de poterie collectés à Mailhot-Curran (BgFn-2), un site archéologique du Sylvicole supérieur tardif localisé dans le sud-ouest du Québec. Le but principal de ce projet était de dater ce site qui est considéré jusqu’à maintenant comme le plus récent site préhistorique de la concentration de Saint-Anicet, afin de poser un jalon dans la chronologie des sites de cette région. L’OSL a été utilisée conjointement à la datation par radiocarbone (14C) et la sériation du matériel archéologique. L’hypothèse archéologique propose que le village aurait été occupé pendant les années 1518 à 1530 de notre ère (Chapdelaine 2015a). Les résultats que nous proposons dans ce présent mémoire appuient cette proposition. Nous avons obtenu un âge de 490 ± 49 ans (année de référence : 2013), correspondant à l’année 1523 de notre ère avec une probabilité d’occupation du site Mailhot-Curran entre les années 1474 et 1572. Le programme de datation par luminescence optique a été réalisé sur des fragments de poterie domestique composés d’argile de la Mer de Champlain datant de la période du Quaternaire récent. La datation par stimulation infrarouge (IRSL) a été préférentiellement utilisée sur des aliquotes de grains fins polyminéraliques. Pour la détermination des doses équivalentes, un protocole SAR (Murray et Wintle 2000) modifié pour la mesure des feldspaths et incluant un lessivage optique a été utilisé (Lamothe et al. 2004). Les valeurs g ont été mesurées en suivant le protocole proposé par Auclair et al. (2003). La correction de Huntley et Lamothe (2001) a été utilisée afin de corriger les doses équivalentes mesurées pour la décroissance anormale du signal feldspathique. Les doses annuelles ont pour leur part été déterminées par des mesures réalisées in situ et en laboratoire. Les résultats que nous présentons dans ce mémoire sont affectés par une dispersion assez large. Cette variabilité a été prise en compte par des méthodes statistiques pour la détermination de l’âge probable de l’occupation du site Mailhot-Curran.

Criar e participar : uma análise ao envolvimento em projetos artístico-culturais no Instituto Federal de Brasília - Campus Planaltina

Dissertação apresentada para obtenção do grau de mestre em Educação Social e Intervenção Comunitária

La datation du site Mailhot-Curran : application de la luminescence optique sur des poteries iroquoiennes du Saint-Laurent

La luminescence optique (OSL) a été mesurée sur dix-sept fragments de poterie collectés à Mailhot-Curran (BgFn-2), un site archéologique du Sylvicole supérieur tardif localisé dans le sud-ouest du Québec. Le but principal de ce projet était de dater ce site qui est considéré jusqu’à maintenant comme le plus récent site préhistorique de la concentration de Saint-Anicet, afin de poser un jalon dans la chronologie des sites de cette région. L’OSL a été utilisée conjointement à la datation par radiocarbone (14C) et la sériation du matériel archéologique. L’hypothèse archéologique propose que le village aurait été occupé pendant les années 1518 à 1530 de notre ère (Chapdelaine 2015a). Les résultats que nous proposons dans ce présent mémoire appuient cette proposition. Nous avons obtenu un âge de 490 ± 49 ans (année de référence : 2013), correspondant à l’année 1523 de notre ère avec une probabilité d’occupation du site Mailhot-Curran entre les années 1474 et 1572. Le programme de datation par luminescence optique a été réalisé sur des fragments de poterie domestique composés d’argile de la Mer de Champlain datant de la période du Quaternaire récent. La datation par stimulation infrarouge (IRSL) a été préférentiellement utilisée sur des aliquotes de grains fins polyminéraliques. Pour la détermination des doses équivalentes, un protocole SAR (Murray et Wintle 2000) modifié pour la mesure des feldspaths et incluant un lessivage optique a été utilisé (Lamothe et al. 2004). Les valeurs g ont été mesurées en suivant le protocole proposé par Auclair et al. (2003). La correction de Huntley et Lamothe (2001) a été utilisée afin de corriger les doses équivalentes mesurées pour la décroissance anormale du signal feldspathique. Les doses annuelles ont pour leur part été déterminées par des mesures réalisées in situ et en laboratoire. Les résultats que nous présentons dans ce mémoire sont affectés par une dispersion assez large. Cette variabilité a été prise en compte par des méthodes statistiques pour la détermination de l’âge probable de l’occupation du site Mailhot-Curran.

Lusitanian Amphorae in Carthago Nova (Cartagena, Spain): Distribution and Research Questions

The presence of Lusitanian amphorae in the region of Carthago Nova (Cartagena, Spain) has been known for a few years, and yet it has never been the subject of a monographic study. Integrated in the commercial networks of the western Mediterranean, these products circulated within the harbour system of this city between the 1st and the 5th century AD. This paper aims to present a synthesised review of the main Lusitanian imports that were detected: Dressel 14 and Almagro 50, Almagro 51a-b and Almagro 51c. The difficulty in identifying the ceramic fabrics and the scarce documentation regarding some finds pose complex problems. This study extends to the hinterland of the colony and to other nearby settlements, such as Portmán and Puerto de Mazarrón.