Effects of irrigation on water use and water use efficiency in two fast growing Eucalyptus plantations

Eucalyptus plantations occupy almost 20 million ha worldwide and exceed 3.7 million ha in Brazil alone. Improved genetics and silviculture have led to as much as a three-fold increase in productivity in Eucalyptus plantations in Brazil and the large land area occupied by these highly productive ecosystems raises concern over their effect on local water supplies. As part of the Brazil Potential Productivity Project, we measured water use of Eucalyptus grandis x urophylla clones in rainfed and irrigated stands in two plantations differing in productivity. The Aracruz (lower productivity) site is located in the state of Espirito Santo and the Veracel (higher productivity) site in Bahia state. At each plantation, we measured stand water use using homemade sap flow sensors and a calibration curve using the clones and probes we utilized in the study. We also quantified changes in growth, leaf area and water use efficiency (the amount of wood produced per unit of water transpired). Measurements were conducted for 1 year during 2005 at Aracruz and from August through December 2005 at Veracel. Transpiration at both sites was high compared to other studies but annual estimates at Aracruz for the rainfed treatment compared well with a process model calibrated for the Aracruz site (within 10%). Annual water use at Aracruz was 1394 mm in rainfed treatments versus 1779 mm in irrigated treatments and accounted for approximately 67% and 58% of annual precipitation and irrigation inputs respectively. Increased water use in the irrigated stands at Aracruz was associated with higher sapwood area, leaf area index and transpiration per unit leaf area but there was no difference in the response of canopy conductance with air saturation deficit between treatments. Water use efficiency at the Aracruz site was also not influenced by irrigation and was similar to the rainfed treatment. During the period of overlapping measurements, the response to irrigation treatments at the more productive Veracel site was similar to Aracruz. Stand water use at the Veracel site totaled 975 mm and 1102 mm in rainfed and irrigated treatments during the 5-month measurement period respectively. Irrigated stands at Veracel also had higher leaf area with no difference in the response of canopy conductance with air saturation deficit between treatments. Water use efficiency was also unaffected by irrigation at Veracel. Results from this and other studies suggest that improved resource availability does not negatively impact water use efficiency but increased productivity of these plantations is associated with higher water use and should be given consideration during plantation management decision making processes aimed at increasing productivity. Published by Elsevier B.V.

Production and carbon allocation in monocultures and mixed-species plantations of Eucalyptus grandis and Acacia mangium in Brazil

Introducing nitrogen-fixing tree species in fast-growing eucalypt plantations has the potential to improve soil nitrogen availability compared with eucalypt monocultures. Whether or not the changes in soil nutrient status and stand structure will lead to mixtures that out-yield monocultures depends on the balance between positive interactions and the negative effects of interspecific competition, and on their effect on carbon (C) uptake and partitioning. We used a C budget approach to quantify growth, C uptake and C partitioning in monocultures of Eucalyptus grandis (W. Hill ex Maiden) and Acacia mangium (Willd.) (treatments E100 and A100, respectively), and in a mixture at the same stocking density with the two species at a proportion of 1 : 1 (treatment MS). Allometric relationships established over the whole rotation, and measurements of soil CO2 efflux and aboveground litterfall for ages 4-6 years after planting were used to estimate aboveground net primary production (ANPP), total belowground carbon flux (TBCF) and gross primary production (GPP). We tested the hypotheses that (i) species differences for wood production between E. grandis and A. mangium monocultures were partly explained by different C partitioning strategies, and (ii) the observed lower wood production in the mixture compared with eucalypt monoculture was mostly explained by a lower partitioning aboveground. At the end of the rotation, total aboveground biomass was lowest in A100 (10.5 kg DM m(-2)), intermediate in MS (12.2 kg DM m(-2)) and highest in E100 (13.9 kg DM m(-2)). The results did not support our first hypothesis of contrasting C partitioning strategies between E. grandis and A. mangium monocultures: the 21% lower growth (delta B-w) in A100 compared with E100 was almost entirely explained by a 23% lower GPP, with little or no species difference in ratios such as TBCF/GPP, ANPP/TBCF, delta B-w/ANPP and delta B-w/GPP. In contrast, the 28% lower delta B-w in MS than in E100 was explained both by a 15% lower GPP and by a 15% lower fraction of GPP allocated to wood growth, thus partially supporting our second hypothesis: mixing the two species led to shifts in C allocations from above- to belowground, and from growth to litter production, for both species.

Calibration of a Species-Specific Spectral Vegetation Index for Leaf Area Index (LAI) Monitoring: Example with MODIS Reflectance Time-Series on Eucalyptus Plantations

The leaf area index (LAI) is a key characteristic of forest ecosystems. Estimations of LAI from satellite images generally rely on spectral vegetation indices (SVIs) or radiative transfer model (RTM) inversions. We have developed a new and precise method suitable for practical application, consisting of building a species-specific SVI that is best-suited to both sensor and vegetation characteristics. Such an SVI requires calibration on a large number of representative vegetation conditions. We developed a two-step approach: (1) estimation of LAI on a subset of satellite data through RTM inversion; and (2) the calibration of a vegetation index on these estimated LAI. We applied this methodology to Eucalyptus plantations which have highly variable LAI in time and space. Previous results showed that an RTM inversion of Moderate Resolution Imaging Spectroradiometer (MODIS) near-infrared and red reflectance allowed good retrieval performance (R-2 = 0.80, RMSE = 0.41), but was computationally difficult. Here, the RTM results were used to calibrate a dedicated vegetation index (called "EucVI") which gave similar LAI retrieval results but in a simpler way. The R-2 of the regression between measured and EucVI-simulated LAI values on a validation dataset was 0.68, and the RMSE was 0.49. The additional use of stand age and day of year in the SVI equation slightly increased the performance of the index (R-2 = 0.77 and RMSE = 0.41). This simple index opens the way to an easily applicable retrieval of Eucalyptus LAI from MODIS data, which could be used in an operational way.

Java Cryptographic Library for Smartphones

A JME-compliant cryptographic library for mobile application development is introduced in this paper. The library allows cryptographic protocols implementation over elliptic curves with different security levels and offers symmetric and asymmetric bilinear pairings operations, as Tate, Weil, and Ate pairings.

Introducing Acacia mangium trees in Eucalyptus grandis plantations: consequences for soil organic matter stocks and nitrogen mineralization

Background and aims Eucalyptus plantations cover 20 million hectares on highly weathered soils. Large amounts of nitrogen (N) exported during harvesting lead to concerns about their sustainability. Our goal was to assess the potential of introducing A. mangium trees in highly productive Eucalyptus plantations to enhance soil organic matter stocks and N availability. Methods A randomized block design was set up in a Brazilian Ferralsol soil to assess the effects of mono-specific Eucalyptus grandis (100E) and Acacia mangium (100A) stands and mixed plantations (50A:50E)on soil organic matter stocks and net N mineralization. Results A 6-year rotation of mono-specific A. mangium plantations led to carbon (C) and N stocks in the forest floor that were 44% lower and 86% higher than in pure E. grandis stands, respectively. Carbon and N stocks were not significantly different between the three treatments in the 0-15 cm soil layer. Field incubations conducted every 4 weeks for the two last years of the rotation estimated net soil N mineralization in 100A and 100E at 124 and 64 kg ha(-1) yr(-1), respectively. Nitrogen inputs to soil with litterfall were of the same order as net N mineralization. Conclusions Acacia mangium trees largely increased the turnover rate of N in the topsoil. Introducing A. mangium trees might improve mineral N availability in soils where commercial Eucalyptus plantations have been managed for a long time.

Do changes in carbon allocation account for the growth response to potassium and sodium applications in tropical Eucalyptus plantations?

Understanding the underlying mechanisms that account for the impact of potassium (K) fertilization and its replacement by sodium (Na) on tree growth is key to improving the management of forest plantations that are expanding over weathered tropical soils with low amounts of exchangeable bases. A complete randomized block design was planted with Eucalyptus grandis (W. Hill ex Maiden) to quantify growth, carbon uptake and carbon partitioning using a carbon budget approach. A combination of approaches including the establishment of allometric relationships over the whole rotation and measurements of soil CO2 efflux and aboveground litterfall at the end of the rotation were used to estimate aboveground net production (ANPP), total belowground carbon flux and gross primary production (GPP). The stable carbon isotope (delta C-13) of stem wood alpha-cellulose produced every year was used as a proxy for stomatal limitation of photosynthesis. Potassium fertilization increased GPP and decreased the fraction of carbon allocated belowground. Aboveground net production was strongly enhanced, and because leaf lifespan increased, leaf biomass was enhanced without any change in leaf production, and wood production (P-W) was dramatically increased. Sodium application decreased the fraction of carbon allocated belowground in a similar way, and enhanced GPP, ANPP and P-W, but to a lesser extent compared with K fertilization. Neither K nor Na affected delta C-13 of stem wood alpha-cellulose, suggesting that water-use efficiency was the same among the treatments and that the inferred increase in leaf photosynthesis was not only related to a higher stomatal conductance. We concluded that the response to K fertilization and Na addition on P-W resulted from drastic changes in carbon allocation.

A Java-based simulation environment for networks of simplified neuron models

ACR is supported by a research grant from CNPq.

Tigela, café e xícara: diversidade formal e dinâmicas de consumo na produção das louças brancas da cidade de São Paulo no começo do século XX

Este artigo apresenta algumas reflexões em torno das formas e volumes das louças em faiança fina produzidas, e consumidas, na cidade de São Paulo, durante o período de 1913 e 1937, relacionando-as a alguns hábitos levados a cabo na Paulicéia, como o crescente costume do "cafezinho". Para tal, parte-se das análises do acervo gerado pelo resgate do sítio arqueológico Petybon, localizado na zona metropolitana da cidade, no bairro da Lapa, região da Água Branca/Vila Romana. Aponta-se que a diversidade de formas das louças dialoga com os projetos de modernidade pensados para São Paulo e as demandas dos consumidores cujas diversas práticas culturais influenciaram na produção das faianças finas pela Fábrica de Louças Santa Catharina e Indústrias Reunidas Fábricas Matarazzo.

Análise de concorrência no mercado mundial de café verde

A literatura argumenta que o Brasil, embora ainda seja o maior exportador mundial de café verde, tem perdido poder neste mercado, pois a concorrência (rivalidade e probabilidade de entrada) imposta por países como a Colômbia e o Vietnã é forte o suficiente para tornar este mercado bastante competitivo. Assim, este artigo avalia o padrão recente de concorrência do mercado mundial de café verde utilizando uma metodologia econométrica mais usualmente empregada em análise antitruste. Para avaliar o comportamento dos consumidores, foram estimadas as elasticidades-preço da demanda mundial de café verde, por tipo de café, usando o modelo de demanda Logit Multinomial Antitruste. Para avaliar o comportamento de equilíbrio de mercado foram realizados testes de instabilidade de share de quantidade por meio de análise de cointegração em painel. Os resultados apontam para aumento da concorrência à variedade de café brasileiro por parte da demanda e manutenção de sharede quantidades como configuração de equilíbrio de mercado.

Uma análise da gestão de risco de preço por parte dos produtores de café arábica no Brasil

Os mercados futuros possuem uso restrito entre os cafeicultores brasileiros, o que, de certa maneira, não condiz com as altas razões ótimas de hedge obtidas nos modelos de mínima variância. Os motivos para esta baixa utilização estão associados às características do produtor e de seu negócio, preferências em relação ao modelo de administração de risco da atividade e questões comportamentais. Diante disso, o presente estudo buscou verificar quais fatores interferem na decisão de uso destes derivativos entre os cafeicultores brasileiros. Em uma primeira etapa, foram calculadas razões ótimas de hedge, de acordo com Myers e Thompson (1989), para os mercados da BM&FBOVESPA e ICE Futures. Tais razões apresentaram valores superiores a 50%. Em uma segunda etapa, a partir da aplicação de 373 questionários, observou-se que 12,9% da amostra declara conhecer e utilizar futuros, sendo que, na média, a razão de hedge adotada esteve abaixo de 50%. Em uma terceira etapa, a partir de um modelo logit, concluiu-se que os fatores que influenciaram o uso dos contratos foram grau de aversão ao risco de preço, tamanho da produção, nível de conhecimento sobre derivativos e dimensão pela qual se entende que tais instrumentos levam à maior estabilidade da receita da atividade.

Desarrollo de un videojuego multiplataforma en Java

[ES] El trabajo consistirá en abordar el desarrollo de un videojuego utilizando el lenguaje de programación Java y una librería especializada en desarrollo de videojuegos. Crearemos un videojuego del género plataformas. Para ello utilizaremos una vista en dos dimensiones, el jugador controlará un personaje humanoide con el que deberá atravesar una serie de niveles. Los niveles estarán agrupados en mundos con distintas temáticas (nieve, espacio, etc.) y en ellos el jugador se encontrará con múltiples obstáculos y enemigos. Los mundos se definen como agrupaciones de diez niveles en las que en el décimo nivel de cada mundo (nivel final) el jugador se enfrenta a un enemigo con una complejidad mayor al resto. Un ejemplo de videojuego de plataformas similar al que se va a desarrollar sería: "Super Mario Bros.". La librería que utilizaremos permite el desarrollo de videojuegos de escritorio y para móviles utilizando el mismo código. Es multiplataforma y soporta Windows, Linux, Mac OS X, Android, iOS, y navegadores con soporte WebGL.

JavaFMI una librería Java para el estándar Functional Mockup Interface

[ES] El estándar Functional Mockup Interface (FMI), es un estándar abierto e independiente de cualquier aplicación o herramienta que permite compartir modelos de sistemas dinámicos entre aplicaciones. Provee una interfaz escrita en lenguaje C que ha de ser implementada por las distintas herramientas exportadoras y pone en común un conjunto de funciones para manipular los modelos.
JavaFMI es una herramienta que permite utilizar simulaciones que cumplen con el estándar FMI en aplicaciones Java de una manera muy simple, limpia y eficiente. Es un proyecto open source con licencia LGPL V2.1H y su código fuente se encuentra disponible para ser clonado en la pagina del proyecto. El proyecto se encuentra alojado en www.bitbucket.org/siani/javafmi y cuenta con una página de bienvenida donde se explica como se usa la librería, una página para reportar incidencias o solicitar que se implementen nuevas historias y una página donde se listan todas las versiones que hay disponibles para descargar. JavaFMI se distribuye como un fichero zip que contiene el .jar con el código compilado de la librería una carpeta lib con las dos dependencias que tiene con librerías externas y una copia de la licencia. Comparada con JFMI, con menos lineas de código, una API limpia, expresiva y auto documentada, y un rendimiento que es un 66 % mejor, JavaFMI es objetivamente la mejor herramienta Java que existe para manipular FMUs de la versión 1.0 y 2.0 del estándar FMI.

Automatic code generation: from process algebraic architectural descriptions to multithreaded java programs

Process algebraic architectural description languages provide a formal means for modeling software systems and assessing their properties. In order to bridge the gap between system modeling and system im- plementation, in this thesis an approach is proposed for automatically generating multithreaded object-oriented code from process algebraic architectural descriptions, in a way that preserves – under certain assumptions – the properties proved at the architectural level. The approach is divided into three phases, which are illustrated by means of a running example based on an audio processing system. First, we develop an architecture-driven technique for thread coordination management, which is completely automated through a suitable package. Second, we address the translation of the algebraically-specified behavior of the individual software units into thread templates, which will have to be filled in by the software developer according to certain guidelines. Third, we discuss performance issues related to the suitability of synthesizing monitors rather than threads from software unit descriptions that satisfy specific constraints. In addition to the running example, we present two case studies about a video animation repainting system and the implementation of a leader election algorithm, in order to summarize the whole approach. The outcome of this thesis is the implementation of the proposed approach in a translator called PADL2Java and its integration in the architecture-centric verification tool TwoTowers.