933 resultados para Plantas - Efeito da umidade do solo
Resumo:
O potássio é um dos macronutrientes que as plantas absorvem em maior quantidade, influenciando na batateira a produtividade e a qualidade dos tubérculos. A introdução de novas variedades de batata para indústria implica a avaliação prévia da sua adaptação às condições de solo, clima e tecnologia cultural. Neste contexto, instalou-se um ensaio em Salvaterra-de-Magos, em pleno campo de cultivo, com o objetivo de avaliar o efeito de diferentes doses e modo de fraccionamento (à plantação e em cobertura, após a emergência) de potássio (K2O) na batata de indústria “VR0808”. Foram avaliados 5 tratamentos: (K0-0kg/ha, K1-100kg/ha, K2-200kg/ha, K3-100+50+50kg/ha e K4-200+50+50kg/ha). O dispositivo experimental foi o de parcelas totalmente aleatórias, com 4 repetições. Foi possível concluir que, em relação ao rendimento, com excepção do K4-200+50+50kg/ha, não existiram diferenças significativas entre os tratamentos com 0, 100, 200 e 100+50+50kg/ha de K2O. A mobilização do K2O de formas fixas e/ou de origem orgânica poderá explicar este resultado. Observou-se um decréscimo dos teores de Ca ao nível da folha e do teor de matéria seca dos tubérculos com o incremento do potássio.
Resumo:
On the national scene, soybean crop occupies a prominent position in cultivated area and volume production, being cultivated largely in the no tillage system. This system, due to the intense traffic of machines and implements on its surface has caused soil compaction problems, which has caused the yield loss of crops. In order to minimize this effect the seeder-drill uses the systems to opening the furrow by shank or the double disc type. The use of the shank has become commonplace for allowing the disruption of the compacted surface layer, however requires greater energy demand and may cause excessive tillage in areas where there is not observed high levels of compaction. Thus, this study aimed to evaluate the effects of furrowers mechanisms and levels of soil compacting on traction requirement by a seeder-drill and on the growing and productivity of soybean in an Oxisol texture clay, in a two growing seasons. The experimental design consisted of randomized blocks with split plots with the main plots composed of four levels of soil compaction (N0 – no tillage without additional compaction, N1, N2 and N3 – no tillage subjected to compaction through two, four and six passes with tractor, respectively) corresponding to densities of soil 1.16, 1.20, 1.22 and 1.26 g cm-3, and subplots by two furrowers mechanisms (shank and double disc) with four replicates. To evaluate the average, maximum and specific traction force requested by the seeder-drill, was used a load cell, with capacity of 50 kN and sensitivity of 2 mV V-1, coupled between the tractor and seeder-drill, whose data are stored in a datalogger system model CR800 of Campbell Scientific. In addition, were evaluated the bulk density, soil mechanical resistance to penetration, sowing depth, depth and groove width, soil area mobilized, emergence speed index, emergence operation, final plant stand, stem diameter, plant height, average number of seeds per pod, weight of 1,000 seeds, number of pods per plant and crop productivity. Data were subjected to analysis of variance, the mean of furrowers were compared by Tukey test (p≤0.05), while for the factor soil compaction, polynomial regression analysis was adopted, selected models by the criterion of greater R2 and significance (p≤0.05) of equation parameters. Regardless of the crop season, penetration resistance increase as soil compaction levels up to around 0.20 m deep, and bulk density influenced the sowing quality parameters, however, did not affect the crop yield. In the first season, there was a higher productivity with the use of the shank type. In the second crop season, the shank demanded greater energetic requirement with the increase of bulk density and opposite situation with the double disc. The locking of sowing lines allow better performance of the shank to break the compacted layer.
Resumo:
In order to add value to soybens crops, and hence the marketing, medium and large producers have been using precision agriculture techniques (PA), as the Remote Sensing, Geographic Information Systems (GIS) and positioning satellite, to assist the management of crops. Thus, given the economic relevance of that culture to the southwest of Paraná State and Brazil, scientific studies to increase their productivity and profitability are of main importance. The objective of this study was to evaluate the correlation between the chemical soil properties and soybean yield for each estimated parameter of semivariogram (range, nugget and level effect), and the deployment of these correlations in direct and indirect effects, aiming to improve the mapping process of spatial variability of soil chemical properties for use in PA. The hypothesis is that not all attributes of soil used to estimate the semivariogram parameters has a direct effect on productivity, and that even in groups of plants within a larger area it is possible to estimate the parameters of the semivariograms. The experiment was conducted in a commercial area of 19.7 ha, located in the city of Pato Branco - PR, central geographic coordinates 26º 11 '35 "South, 52 43' 05" West longitude, and average altitude of 780 m. The area is planted with soybeans for over 30 years, currently being adopted to cultivate Brasmax Target RR - Don Mario 5.9i, with row spacing of 0.50 m and 13 plants m-1, totaling 260,000 plants ha-1. For georeferencing of the area of study and sampling points was used a couple of topographic ProMarkTM3 receptors, making a relative positioning to obtain the georeferenced coordinates. To collect data (chemical analyzes of soil and crop yield) were sampled 10 blocks in the experimental area, each with an area of 20 m2 (20 meters long x 1 meter wide) containing two spaced adjacent rows of 0.5 m. Each block was divided into 20 portions of 1 m2, and from each were collected four subsamples at a distance of 0.5 m in relation to the lines of blocks, making up a sample depth for 0-10 cm a sample to 10-20 cm for each plot, totaling 200 samples for each depth. The soybean crop was performed on the blocks depending on maturity, and in each block was considered a bundle at each meter. In the data analysis, it was performed a diagnosis of multicollinearity, and subsequently a path analysis of the main variables according to the explanatory variables (range of chemical attributes: pH, K, P, Ca, etc.). The results obtained by the path analysis of the parameters of the semivariogram of soil chemical properties, indicated that only the Fe, Mg, Mn, organic matter (OM), P and Saturation by bases (SB) exerted direct and indirect effects on soybean productivity, although they have not presented spatial variability, indicating that the distribution of blocks in the area was unable to identify the spatial dependence of these elements, making it impossible to draw up maps of the chemical attributes for use in PA.
Resumo:
The use of cover crops is a fundamental strategy to the weed management in Southern Brazil. In highly infested areas, the herbicides use is increasing, which increases the costs of the crops production as well as the environmental contamination. Oat and velvet bean plants havecontrasting characteristics regarding to residues decomposition speed and the capacity to immobilize Nitrogen in the soil, providing distinct results of weeds suppression throughout the time, and therefore, requiring distinct management strategies before, during, and after the corn crop establishment. The general objective of the experiment was to evaluate the environmental dynamics of the herbicide atrazine, the corn grain yield, and the efficiency of the weed control, considering areas with distinct history regarding the use of mulching, levels of straw and rates of atrazine. For this, the experiment was carried out in two parts: in the first part, two trials with the corn crop were established, one using oat and the other using velvet bean as cover crops. The experimental design used for both field trials was randomized complete blocks arrangement with four replications. The factor A was constituted by four levels of straw (0; 0.75x; 1.5x; 3x) and the factor B was constituted by four rates of the herbicide atrazine (0; 2100; 4200; 8400 g a i. ha-1). Soil samples were collected for greenhouse trialsto determine the persistence. Atrazine leaching evaluation was performed by chromatography using samples collected over the soil profile.In the field, the weed density, the fresh and dry weight and the yield of the corn were evaluated. In the greenhouse trials, the main variables evaluated were plant height and injury caused by the herbicide toxicity. In the second part, soils with distinct covering history were sampled, and the mineralization and sorption studies, both with 14C-atrazine, were conducted in the laboratory. The experimental design was randomized complete blocks arrangement with four replications. The results from the field experiment show that the high levels of straw above ground, isolated, were not efficient to control completely the weeds, and that high levels of velvet bean`s straw decreased the corn potential yield. The greenhouse trials showed that high levels of oat straw prevent the scape of atrazine to soil, this effect of oat straw upon the herbicide availability on soil was detected up to 12 days after spraying. The half-life of atrazine sprayed over oat straw varied from 7 to 14 days after spraying, while the half-life of atrazine sprayed over velvet bean varied from 5 to 14 days after spraying. Increasing oat straw levels presents the capacity to reduce the lixiviation of atrazine in the soil profile, however, this effect was not verified when using velvet bean straw, because the herbicide was not detected in the soil profile, at 21 days after spraying. The chromatographic analysis indicate thatthe atrazine concentrates closer to the soil surface regardless of amount of straw, not being detected deeper than 8 cm in the soil. The accumulated mineralization of 14C-arazine sprayed over V. sativa is superior if compared to soils with S. cereale or non-covered soils. The sorption coefficient of atrazine is superior when sprayed over straw than over the soil.
Resumo:
The replacement of native vegetation by other land uses is one of the main degrading ecosystem agents, being the most important component of terrestrial environments, natural or with different levels of human disturbance, besides being the main substrate used by plants to obtain conditions soil for its development. In this context, there is the need to adopt the use and sustainable management of land systems. The study aimed to evaluate what is forest restoration system more efficient degraded areas, based on the potential recovery of physical, chemical, carbon and biological activity in the soil. The work was conducted in a forest restoration area UTFPR- Campus two neighbors, whose experiment was established in October 2010. The experimental design is completely randomized, with four replications and experimental plot of 40 m wide by 54 m long ( 2160 m2) were collected and six sampling points per plot. The soil is classified as a Typic. The models evaluated are: 1 - natural or passive regeneration; 2 - Nucleation; 3 - Planting trees in the total area under lines fill and diversity (total planting); 4 - Reference area (forest). The collection of soil samples in layers of 0.0-0.05, 0.05-0.10, 0.10-0.20 and 0.20-0.40 m was carried out in October 2013 and evaluated physical attributes of texture, bulk density, total porosity, microporosity and soil macroporosity and stability of water in households, chemical properties, and total organic carbon (TOC) and physical particle size fractionation and soil biological activity. To find the best forest restoration model, we designed a Restoration Quality Weighted Index for each variable analyzed. Natural regeneration and total plantation showed generally better soil aggregation over 0.10 m and nucleation volume of similar porosity the forest for these layers. There were no differences between the models below 0.10 m for the variables aggregation and soil porosity. The nucleation template had the lowest bulk density, but being greater than the density in the layer forest 0.05-0.10 m, however, was similar to below 0.10 m above the ground. The models had chemical properties similar to or greater than the forest. The forest had the highest stock of COT and carbon associated with minerals (CAM), but natural regeneration was similar to the particulate organic carbon (POC) in the superficial layers of the soil (0-0.10 m), below 0, 10 m, the forest showed higher stock of COT and COP on the ground. The highest peak of C-CO2 emissions occurred in the 28-35 day range where the total plantation was similar to forest. After four years of experiments, it was found that the effect of restoration methods on physical attributes and soil carbon restricted to 0.10 m deep.
Resumo:
To achieve high yields the corn crop is dependent on nitrogen. Systems of cover crops preceding corn and form of land cultivation are essential for the best use of nitrogen by corn. This study aimed to evaluate the use or not of nitrogen fertilization in corn in succession to cover crops, planted in three cropping systems. The experimental design was randomized blocks with sub-divided portion where the main plots consisted of three cultivation systems (tillage, conventional tillage and minimum tillage), the subplots by four plant cover in monocrop (oat, hairy vetch, field peas and turnip) and sub-subplots by nitrogen fertilization (0 and 160 kg ha-1 N). Evaluations were performed, the cover crops, soil cover rate, dry matter, content and accumulation of nutrients. In corn we evaluated yield components, yield, chlorophyll and nutrient levels in leaves. Among the species coverage studied the oat showed hardiness in the experiment, covering ground faster and showing more dry matter, however vetch hairy showed higher concentrations of N, P and K and higher accumulation of N ha-1. The soil tillage system influenced the K leaf content. The interaction cultivation x coverage showed significance for the total chlorophyll of corn. In the absence of N, N content and chlorophyll were higher where the corn was sown on the pea and hairy vetch. The corn production, despite a higher average in the presence of nitrogen fertilization, did not differ significantly when used the pea and hairy vetch as a cover crop.
Resumo:
O potássio é um dos macronutrientes que as plantas absorvem em maior quantidade, influenciando na batateira a produtividade e a qualidade dos tubérculos. A introdução de novas variedades de batata para indústria implica a avaliação prévia da sua adaptação às condições de solo, clima e tecnologia cultural. Neste contexto, instalou-se um ensaio em Salvaterra-de-Magos, em pleno campo de cultivo, com o objetivo de avaliar o efeito de diferentes doses e modo de fraccionamento (à plantação e em cobertura, após a emergência) de potássio (K2O) na batata de indústria “VR0808”. Foram avaliados 5 tratamentos: (K0-0kg/ha, K1-100kg/ha, K2-200kg/ha, K3-100+50+50kg/ha e K4-200+50+50kg/ha). O dispositivo experimental foi o de parcelas totalmente aleatórias, com 4 repetições. Foi possível concluir que, em relação ao rendimento, com excepção do K4-200+50+50kg/ha, não existiram diferenças significativas entre os tratamentos com 0, 100, 200 e 100+50+50kg/ha de K2O. A mobilização do K2O de formas fixas e/ou de origem orgânica poderá explicar este resultado. Observou-se um decréscimo dos teores de Ca ao nível da folha e do teor de matéria seca dos tubérculos com o incremento do potássio.
Resumo:
Due to the high supply and its attractive cost, the poultry litter has been used in the southwestern region of Parana to the improvement of soil fertility seeking greater production of grains and pastures. However, the use without technical knowledge can minimize the benefits of poultry litter or even cause undesirable effects on soil, environmental pollution and also productivity losses in the used crops. The objective of this study was to evaluate the influence of different times of poultry litter application, predating the winter crop, associated with increasing levels, about soil chemical properties, release of nutrients and crop performances in four consecutive years (2011-2014). In the first three years the experimental design was randomized blocks with a split plot system and four replications. In the main plots were tested four poultry litter application times preceding the wheat production: 0, 15, 30 and 45 days before sowing (DAS); in the subplots were applied four poultry litter levels (wet basis): 0, 4, 8 and 12 Mg ha-1. Last year one more subdivision of plots was done, evaluating the use or not of nitrogen in coverage in wheat, at a dose of 100 kg N ha-1. The wheat cultivar used in the four years was the BRS 220. In three years it was evaluated the residual effect on soybean production (cultivar - BMX Turbo RR) and in one year on the beans. The chemical soil attributes were evaluated at four depths 0-2,5cm, 2,5-5cm, 5-10cm and 10-20cm, and also the rate of decomposition and nutrient release of poultry litter and the crop productivity. The different times of application concerning the poultry litter had little influence on the studied variables, demonstrating that the producer does not need to have a specific date (before planting) to the application of poultry litter. Potassium was fully released 60 days after the allocation of litter bags into the field; for nitrogen and phosphorus the release was slower. The use of increasing levels of poultry litter increased the levels of various soil elements, highlighting the potassium which reached 20 cm deep in the second year of evaluation. The increase in pH and in the base saturation occurred only in the upper layers, while the phosphorus reached 10 cm deep in the third year of the study. It was observed increased pH and base saturation. The use of increasing doses of poultry litter contributed to the wheat plant nutrition, significantly increasing the weight of a thousand grains, and the grain yield of wheat in all the evaluated years; the nitrogen fertilization in coverage also had significant effect for the fourth evaluated year. Also there was a significant response from the residual effect of poultry litter for crops planted in summer for both soybeans and beans.
Resumo:
Dissertação de Mestrado, Engenharia e Gestão de Sistemas de Água, 23 de Junho de 2016, Universidade dos Açores.
Resumo:
O uso de plantas com potencial de associação com microrganismos é uma prática frequente em solos contaminados por metais pesados, considerada de baixo custo e ambientalmente correta. O trabalho objetivou avaliar o crescimento do Corymbia citriodora (Hook.) K.D. Hill & L.A.S. Johnson e o efeito da inoculação com Pisolithus microcarpus UFSC-Pt116 em solo contaminado com Zn. O delineamento experimental foi inteiramente casualizado em arranjo fatorial (2 x 6), sendo com e sem inóculo e seis doses de Zn (0, 300, 600, 900, 1200 e 1500 mg kg-1 de solo), com seis repetições. As mudas foram inoculadas e cultivadas durante 90 dias em viveiro. Após 67 dias do transplante definitivo foi avaliado o percentual de colonização ectomicorrízica, a altura de planta, diâmetro do colo, número de folhas, índice de clorofila total, volume radicular, massa seca das folhas, da haste caulinar, radicular e total, relação massa seca aérea/massa seca radicular e a relação altura/diâmetro do colo. O percentual de colonização ectomicorrízica em Corymbia citriodora é estimulado pelo acréscimo de até 1412,21 mg kg-1 de Zn no solo. O Corymbia citriodora é tolerante a adição de até 1500 mg kg-1 de zinco em solo com 81% de argila, mesmo sem a inoculação com Pisolithus microcarpus. A análise de correlação canônica evidencia que a inoculação com P. microcarpus favorece a massa seca total, radicular e da parte aérea de Corymbia citriodora cultivado em solo com 81% de argila contaminada com 600 mg kg-1 de Zn.
Resumo:
RESUMO: Neste trabalho foi avaliada a dinâmica do N mineral e a produtividade do milho em solo que vem, a longo tempo, recebendo aplicações de lodos de esgoto provenientes das estações de Tratamento de Franca e de Barueri, ou que recebeu lodo de esgoto por certo período de tempo. As aplicações iniciaram-se em 1999 a taxas que variaram na dose recomendada, tomando-se como base os requerimentos da planta em N, até uma taxa 8 vezes maior. Nos anos de 2004 e 2005 os lodos não foram aplicados. Em 2006 e 2007 somente foi aplicado o lodo de Franca. Os resultados deste trabalho referem-se às coletas de solo feitas no ano agrícola 2007/2008. Os tratamentos com lodo foram comparados com o tratamento com fertilização mineral (FM) e com o tratamento testemunha (T), que não recebeu fertilizantes e nem lodo. Os teores de N no solo aumentaram com as doses do lodo de Franca, o que não ocorreu com o lodo de Barueri. As produtividades do milho foram maiores nos tratamentos com o lodo de Franca e não diferiram com as doses aplicadas. Nos tratamentos com o lodo de Barueri as produtividades foram menores que as obtidas com o lodo de Franca, mas foram semelhantes às obtidas no tratamento com FM. A menor produtividade foi obtida no tratamento T. Os maiores teores de N totais nos grãos foram obtidos nos tratamentos com o lodo de Franca sem diferença entre as doses.
Resumo:
EFEITO DA APLICAÇÃO CONTINUADA DE BIOSÓLIDO NA COMPARTIMENTALIZAÇÃO DE METAIS EM SOLO CULTIVADO COM BANANA (MUSA SPP). MA040 Germana Breves Rona1; Fernanda Ardilha1; Fernanda Serrenho1; Sarai de Alcantara1; Daniel Vidal Perez2; Luiz A.S. Melo3., germanarona@hotmail.com 1Instituto de Química/UFRJ, Av. Brig. Trompovsky, s/nº, Cidade Universitária, CEP 21949-900, Rio de Janeiro (RJ); 2Embrapa Solos, R. Jardim Botânico, 1024, CEP: 22460-000, Rio de Janeiro (RJ). 3Embrapa Meio Ambiente, Caixa Postal 69, CEP: 13820-000, Jaguariúna (SP) (INTRODUÇÃO) O lodo de esgoto é rico em matéria orgânica e nutrientes, podendo substituir, ainda que parcialmente, os fertilizantes minerais. Graças a essas características, esse resíduo pode desempenhar importante papel na produção agrícola e na manutenção da fertilidade do solo. Entretanto, esse composto apresenta materiais pesados em sua composição. Assim torna-se necessário ponderar as variações das formas disponíveis desses elementos. Nesse sentido, a extração seqüencial é uma metodologia que permite avaliar o destino principal de dado metal no solo em função de suas preferências de ligação química na matriz organomineral. No entanto, essa análise consome muito tempo e reagente. A possibilidade de relacionar essa extração complexa com uma mais simples seria interessante. É o objetivo do presente trabalho, portanto, avaliar a relação entre uma metodologia de extração seqüencial e os dois métodos de extração simples mais usados no Brasil, Mehlich 1 e DTPA. (METODOLOGIA) As amostras foram coletadas em um ensaio instalado no campo experimental da Embrapa-Meio Ambiente (Jaguariúna, SP) em um Argissolo Vermelho- Amarelo. O delineamento experimental foi o de blocos ao acaso com 5 repetições. Os tratamentos estudados foram: 1. fertilização mineral (NPK), com base na análise de solo; 2. aplicação de lodo de esgoto com base na sua concentração de nitrogênio e mantendo a metade da quantidade aplicada na fertilização mineral (N/2); 3 aplicação de lodo de esgoto mantendo a quantidade de N aplicada na fertilização mineral (N); 4. duas vezes a concentração de lodo de esgoto aplicada no tratamento 3 (2N). Dois tipos de lodo foram aplicados: entre 2000 e 2004 usou-se lodo originário da região de Barueri (SP), tipicamente industrial.; em 2005 foi aplicado lodo originário do município de Jundiaí (SP), que pode ser considerado de característica doméstica. Ambos foram fornecidos pela SABESP, na forma adequada para aplicação agrícola. As amostras de solo foram coletadas na profundidade de 0-20 cm no ano de 2006. A extração seqüencial foi a descrita por Wasserman et al. (2005). As extrações simples, DTPA e Mehlich 1 seguiram a metodologia da Embrapa (1997). A determinação de Fe, Cu, Zn e Cr foi realizada por ICP-OES (PE OTIMA 3000). (RESULTADOS) As extrações simples de Fe, Cu, Zn e Cr correlacionaram-se positiva e significativamente com as principais fases do solo ligadas à biodisponibilidade. Os elementos Fe e Zn, extraídos tanto por Mehlich 1, como por DTPA, correlacionaram-se com mais significânica com a Fase 1, ligada à CTC do solo. Já os elementos Cu e Cr, correlacionaram-se melhor com a Fase 3, relacionada à matéria orgânica. O Mn extraído por DTPA apresentou melhor correlação com a Fase 1. (CONCLUSÃO) Todos os metais analisados apresentaram uma tendência em aumentarem sua concentração total em função da dose de lodo aplicada. As fases 1 e 3 apresentam importância neste sentido, sendo este um motivo de grande preocupação, por serem frações biodisponíveis, podendo agravar seriamente, os riscos de contaminação pelos metais em questão. No entanto, as concentrações encontradas são bem menores que aquelas recomendadas pela CONAMA no375/2006. Agradecimentos: CNPq, FAPERJ, FUJB, Embrapa
Resumo:
A maioria das plantas testadas para remediar áreas contaminadas tem sido para fins alimentares ou florestais. Hoje, o interesse aumentou para culturas energéticas, cuja biomassa poderá ser utilizada para biodiesel, biogás ou calor. Os objetivos deste experimento foram avaliar o potencial remediador de plantas de girassol cultivadas em um Neossolo Litólico contaminado com metais pesados e boro e o efeito da aplicação de compostos orgânicos na fitodisponibilidade de metais e de boro. As doses de compostos orgânicos, torta de filtro e turfa, foram de 0,0, 20; 40 e 80 t ha -1 de C orgânico equivalente em, g por vaso, a: 0,0, 37,4, 74,8 e 112,2 para a torta e 0,0, 60,5, 121,0 e 181,5 para a turfa. Plantas de girassol foram crescidas até o estádio de florescimento. Amostras de solo bem como as da parte aérea (caule e flor) e raízes das plantas de girassol foram submetidas às análises químicas para determinação de macro e micronutrientes e metais pesados. As plantas não apresentaram sintomas de toxidez. A produção de massa seca de todas as partes da planta aumentou com o aumento da adição de matéria orgânica, sendo que a adição de torta de filtro foi o tratamento mais efetivo. A aplicação de matéria orgânica não influenciou a concentração de B e de metais pesados disponíveis no solo, mas os valores estavam altos. Concluiu-se que o girassol tem potencial para ser cultivado na área contaminada estudada, além de ser considerado fitoextrator de B.
Resumo:
O objetivo do trabalho foi avaliar o efeito da palha residual da colheita da cana-de-açúcar e da adição de vinhaça sobre o solo na emergência e no crescimento inicial de cultivares de girassol. Os tratamentos foram dispostos em esquema fatorial (5 x 2 x 3), em blocos ao acaso, com quatro repetições, combinando-se cinco quantidades de palha de cana-de-açúcar (0, 5, 10, 15 e 20t ha-1) com aplicação ou não de 150m3 ha-1 de vinhaça residual da indústria sulcroalcooleira, utilizando-se três cultivares de girassol (IAC-iarama, Catissol e Helio 358). Foram determinadas a velocidade e a porcentagem final de emergência de plântulas, além do comprimento e da biomassa seca da parte aérea de plantas aos 30 dias após a semeadura. Verificou-se que a presença da palha de cana-de-açúcar e da vinhaça, em quantidade equivalente a 150m3 ha-1, em ação conjunta ou isolada, reduz a emergência de plântulas e o crescimento inicial de cultivares de girassol. Entretanto, essa redução não compromete drasticamente o desempenho das cultivares (IAC-iarama, Catissol e Helio-358), que não diferiram entre si.
Resumo:
2009