Harvesting undelimbed Scots pine (Pinus sylvestris L.) from first thinnings for integrated production of kraft pulp and energy

The present study evaluates the feasibility of undelimbed Scots pine (Pinus sylvestris L.) for integrated production of pulp and energy in a kraft pulp mill from the technical, economic and environmental points of view, focusing on the potential of bundle harvesting. The feasibility of tree sections for pulp production was tested by conducting an industrial wood-handling experiment, laboratory cooking and bleaching trials, using conventional small-diameter Scots pine pulpwood as a reference. These trials showed that undelimbed Scots pine sections can be processed in favourable conditions as a blend with conventional small-diameter pulpwood without reducing the pulp quality. However, fibre losses at various phases of the process may increase when using undelimbed material. In the economic evaluation, both pulp production and wood procurement costs were considered, using the relative wood paying capability of a kraft pulp mill as a determinant. The calculations were made for three Scots pine first-thinning stands with the breast-height diameter of the removal (6 12 cm) as the main distinctive factor. The supply chains included in the comparison were based on cut-to-length harvesting, whole-tree harvesting and bundle harvesting (whole-tree bundling). With the current ratio of pulp and energy prices, the wood paying capability declines with an increase in the proportion of the energy fraction of the raw material. The supply system based on the cut-to-length method was the most efficient option, resulting in the highest residual value at stump in most cases. A decline in the pulp price and an increase in the energy price improved the competitiveness of the whole-tree systems. With short truck transportation distances and low pulp prices, however, the harvesting of loose whole trees can result in higher residual value at stump in small-diameter stands. While savings in transportation costs did not compensate for the high cutting and compaction costs by the second prototype of the bundle harvester, an increase in transportation distances improved its competitiveness. Since harvesting undelimbed assortments increases nutrient export from the site, which can affect soil productivity, the whole-tree alternatives included in the present study cannot be recommended on infertile peatlands and mineral soils. The harvesting of loose whole trees or bundled whole trees implies a reduction in protective logging residues and an increase in site traffic or payloads. These factors increase the risk of soil damage, especially on peat soils with poor bearing capacity. Within the wood procurement parameters which were examined, the CO2 emissions of the supply systems varied from 13 27 kg m3. Compaction of whole trees into bundles reduced emissions from transportation by 30 39%, but these reductions were insufficient to compensate for the increased emissions from cutting and compaction.

Tree mortality, fire scar formation and regeneration 8 years after low-intensity fire in managed Pinus sylvestris stands

Fire is an important driver of the boreal forest ecosystem, and a useful tool for the restoration of degraded forests. However, we lack knowledge on the ecological processes initiated by prescribed fires, and whether they bring about the desired restoration effects. The purpose of this study was to investigate the impacts of low-intensity experimental prescribed fires on four ecological processes in young commercial Scots pine (Pinus sylvestris) stands eight years after the burning. The processes of interest were tree mortality, dead wood creation, regeneration and fire scar formation. These were inventoried in twelve study plots, which were 30 m x 30 m in size. The plots belonged to two different stand age classes: 30-35 years or 45 years old at the time of burning. The study was partly a follow-up of study plots researched by Sidoroff et al. (2007) one year after burning in 2003. Tree mortality increased from 183 stems ha-1 in 2003 to 259 stems ha-1 in 2010, corresponding to 15 % and 21 % of stem number respectively. Most mortality was experienced in the stands of the younger age class, in smaller diameter classes and among species other than Scots pine. By 2010, the average mortality of Scots pine per plot was 18%, but varied greatly ranging from 0% to 63% of stem number. Delayed mortality, i.e. mortality that occurred between 2 and 8 years after fire, seemed to become more important with increasing diameter. The input of dead wood also varied greatly between plots, from none to 72 m3 ha-1, averaging at 12 m3 ha-1. The amount of fire scarred trees per plot ranged from none to 20 %. Four out of twelve plots (43 %) did not have any fire scars. Scars were on average small: 95% of scars were less than 4 cm in width, and 75% less than 40 cm in length. Owing to the light nature of the fire, the remaining overstorey and thick organic layer, regeneration was poor overall. The abundance of pine and other seedlings indicated a viable seed source existed, but the seedlings failed to establish under dense canopy. The number of saplings ranged from 0 to 12 333 stems ha-1. The results of this study indicate that a low intensity fire does not necessarily initiate the ecological processes of tree mortality, dead wood creation and regeneration in the desired scale. Fire scars, which form the basis of fire dating in fire history studies, did not form in all cases.

Integrated climatic impacts of forestry and fibre-based packaging

The purpose of this study was to examine the integrated climatic impacts of forestry and the use fibre-based packaging materials. The responsible use of forest resources plays an integral role in mitigating climate change. Forests offer three generic mitigation strategies; conservation, sequestration and substitution. By conserving carbon reservoirs, increasing the carbon sequestration in the forest or substituting fossil fuel intensive materials and energy, it is possible to lower the amount of carbon in the atmosphere through the use of forest resources. The Finnish forest industry consumed some 78 million m3 of wood in 2009, while total of 2.4 million tons of different packaging materials were consumed that same year in Finland. Nearly half of the domestically consumed packaging materials were wood-based. Globally the world packaging material market is valued worth annually some €400 billion, of which the fibre-based packaging materials account for 40 %. The methodology and the theoretical framework of this study are based on a stand-level, steady-state analysis of forestry and wood yields. The forest stand data used for this study were obtained from Metla, and consisted of 14 forest stands located in Southern and Central Finland. The forest growth and wood yields were first optimized with the help of Stand Management Assistant software, and then simulated in Motti for forest carbon pools. The basic idea was to examine the climatic impacts of fibre-based packaging material production and consumption through different forest management and end-use scenarios. Economically optimal forest management practices were chosen as the baseline (1) for the study. In the alternative scenarios, the amount of fibre-based packaging material on the market decreased from the baseline. The reduced pulpwood demand (RPD) scenario (2) follows economically optimal management practices under reduced pulpwood price conditions, while the sawlog scenario (3) also changed the product mix from packaging to sawnwood products. The energy scenario (4) examines the impacts of pulpwood demand shift from packaging to energy use. The final scenario follows the silvicultural guidelines developed by the Forestry Development Centre Tapio (5). The baseline forest and forest product carbon pools and the avoided emissions from wood use were compared to those under alternative forest management regimes and end-use scenarios. The comparison of the climatic impacts between scenarios gave an insight into the sustainability of fibre-based packaging materials, and the impacts of decreased material supply and substitution. The results show that the use of wood for fibre-based packaging purposes is favorable, when considering climate change mitigation aspects of forestry and wood use. Fibre-based packaging materials efficiently displace fossil carbon emissions by substituting more energy intensive materials, and they delay biogenic carbon re-emissions to the atmosphere for several months up to years. The RPD and the sawlog scenarios both fared well in the scenario comparison. These scenarios produced relatively more sawnwood, which can displace high amounts of emissions and has high carbon storing potential due to the long lifecycle. The results indicate the possibility that win-win scenarios exist by shifting production from pulpwood to sawlogs; on some of the stands in the RPD and sawlog scenarios, both carbon pools and avoided emissions increased from the baseline simultaneously. On the opposite, the shift from packaging material to energy use caused the carbon pools and the avoided emissions to diminish from the baseline. Hence the use of virgin fibres for energy purposes, rather than forest industry feedstock biomass, should be critically judged if optional to each other. Managing the stands according to the silvicultural guidelines developed by the Forestry Development Centre Tapio provided the least climatic benefits, showing considerably lower carbon pools and avoided emissions. This seems interesting and worth noting, as the guidelines are the current basis for the forest management practices in Finland.

CM defect and Hilbert functions of monomial curves

In this article we consider a semigroup ring R = KGamma] of a numerical semigroup Gamma and study the Cohen- Macaulayness of the associated graded ring G(Gamma) := gr(m), (R) := circle plus(n is an element of N) m(n)/m(n+1) and the behaviour of the Hilbert function H-R of R. We define a certain (finite) subset B(Gamma) subset of F and prove that G(Gamma) is Cohen-Macaulay if and only if B(Gamma) = empty set. Therefore the subset B(Gamma) is called the Cohen-Macaulay defect of G(Gamma). Further, we prove that if the degree sequence of elements of the standard basis of is non-decreasing, then B(F) = empty set and hence G(Gamma) is Cohen-Macaulay. We consider a class of numerical semigroups Gamma = Sigma(3)(i=0) Nm(i) generated by 4 elements m(0), m(1), m(2), m(3) such that m(1) + m(2) = mo m3-so called ``balanced semigroups''. We study the structure of the Cohen-Macaulay defect B(Gamma) of Gamma and particularly we give an estimate on the cardinality |B(Gamma, r)| for every r is an element of N. We use these estimates to prove that the Hilbert function of R is non-decreasing. Further, we prove that every balanced ``unitary'' semigroup Gamma is ``2-good'' and is not ``1-good'', in particular, in this case, c(r) is not Cohen-Macaulay. We consider a certain special subclass of balanced semigroups Gamma. For this subclass we try to determine the Cohen-Macaulay defect B(Gamma) using the explicit description of the standard basis of Gamma; in particular, we prove that these balanced semigroups are 2-good and determine when exactly G(Gamma) is Cohen-Macaulay. (C) 2011 Published by Elsevier B.V.

Geotechnical Characterization of Some Indian Bentonites for their Use as Buffer Material in Geological Repository

The present study examines the geotechnical properties of Indian bentonite clays for their suitability as buffer material in deep geological repository for high-level nuclear wastes. The bentonite samples are characterized for index properties, compaction, hydraulic conductivity and swelling characteristics. Evaluation of geotechnical properties of the compacted bentonite-sand admixtures, from parts of NW India reveals swelling potentials and hydraulic conductivities in the range of 55 % - 108 % and 1.2 X 10 –10 cm/s to 5.42x 10 –11 cm/s respectively. Strong correlation was observed between ESP (exchangeable sodium percentage) and liquid limit/swell potential of tested specimens. Relatively less well-defined trends emerged between ESP and swell pressure/hydraulic conductivity. The Barmer-1 bentonite despite possessing relatively lower montmorillonite content of 68 %, developed higher Atterberg limit and swell potential, and exhibited comparable swelling pressure and hydraulic conductivity as other bentonites with higher montmorillonite contents (82 to 86 %). The desirable geotechnical properties of Barmer clay as a buffer material is attributed to its large ESP (63 %) and, EMDD (1.17 Mg/m3) attained at the experimental compactive stress(5 MPa).

Prioritisation of micro-catchments based on morphology

Two multicriterion decision-making methods, namely `compromise programming' and the `technique for order preference by similarity to an ideal solution' are employed to prioritise 22 micro-catchments (A1 to A22) of Kherthal catchment, Rajasthan, India and comparative analysis is performed using the compound parameter approach. Seven criteria - drainage density, bifurcation ratio, stream frequency, form factor, elongation ratio, circulatory ratio and texture ratio - are chosen for the evaluation. The entropy method is employed to estimate weights or relative importance of the criterion which ultimately affects the ranking pattern or prioritisation of micro-catchments. Spearman rank correlation coefficients are estimated to measure the extent to which the ranks obtained are correlated. Based on the average ranking approach supported by sensitivity analysis, micro-catchments A6, A10, A3 are preferred (owing to their low ranking) for further improvements with suitable conservation and management practices, and other micro-catchments can be processed accordingly at a later phase on a priority basis. It is concluded that the present approach can be explored for other similar situations with appropriate modifications.

ADAPTATION OF MW LEVEL NATURAL GAS LEAN BURN ENGINE FOR PRODUCER GAS OPERATION A GRID CONNECTED POWER PLANT

Availability of producer gas engines at MW being limited necessitates to adapt engine from natural gas operation. The present work focus on the development of necessary kit for adapting a 12 cylinder lean burn turbo-charged natural gas engine rated at 900 kWe (Waukesha make VHP5904LTD) to operate on producer and set up an appropriate capacity biomass gasification system for grid linked power generation in Thailand. The overall plant configuration had fuel processing, drying, reactor, cooling and cleaning system, water treatment, engine generator and power evacuation. The overall project is designed for evacuation of 1.5 MWe power to the state grid and had 2 gasification system with the above configuration and 3 engines. Two gasification system each designed for about 1100 kg/hr of woody biomass was connected to the engine using a producer gas carburetor for the necessary Air to fuel ratio control. In the use of PG to fuel IC engines, it has been recognized that the engine response will differ as compared to the response with conventional fueled operation due to the differences in the thermo-physical properties of PG. On fuelling a conventional engine with PG, power de-rating can be expected due to the lower calorific value (LCV), lower adiabatic flame temperature (AFT) and the lower than unity product to reactant more ratio. Further the A/F ratio for producer gas is about 1/10th that of natural gas and requires a different carburetor for engine operation. The research involved in developing a carburetor for varying load conditions. The patented carburetor is based on area ratio control, consisting of a zero pressure regulator and a separate gas and air line along with a mixing zone. The 95 litre engine at 1000 rpm has an electrical efficiency of 33.5 % with a heat input of 2.62 MW. Each engine had two carburetors designed for producer gas flow each capable of handling about 1200 m3/hr in order to provide similar engine heat input at a lower conversion efficiency. Cold flow studies simulating the engine carburetion system results showed that the A/F was maintained in the range of 1.3 +/- 0.1 over the entire flow range. Initially, the gasification system was tested using woody biomass and the gas composition was found to be CO 15 +/- 1.5 % H-2 22 +/- 2% CH4 2.2 +/- 0.5 CO2 11.25 +/- 1.4 % and rest N-2, with the calorific value in the range of 5.0 MJ/kg. After initial trials on the engine to fine tune the control system and adjust various engine operating parameter a peak load of 800 kWe was achieved, while a stable operating conditions was found to be at 750 kWe which is nearly 85 % of the natural gas rating. The specific fuel consumption was found to be 0.9 kg of biomass per kWh.

EXPERIENCE OF OPERATING OPEN TOP BIOMASS GASIFIER USING A LOW DENSITY FUEL-COCONUT FRONDS

Use of fuel other than woody generally has been limited to rice husk and other residues are rarely tried as a fuel in a gasification system. With the availability of woody biomass in most countries like India, alternates fuels are being explored for sustainable supply of fuel. Use of agro residues has been explored after briquetting. There are few feedstock's like coconut fronts, maize cobs, etc, that might require lesser preprocessing steps compared to briquetting. The paper presents a detailed investigation into using coconut fronds as a fuel in an open top down draft gasification system. The fuel has ash content of 7% and was dried to moisture levels of 12 %. The average bulk density was found to be 230 kg/m3 with a fuel size particle of an average size 40 mm as compared to 350 kg/m3 for a standard wood pieces. A typical dry coconut fronds weighs about 2.5kgs and on an average 6 m long and 90 % of the frond is the petiole which is generally used as a fuel. The focus was also to compare the overall process with respect to operating with a typical woody biomass like subabul whose ash content is 1 %. The open top gasification system consists of a reactor, cooling and cleaning system along with water treatment. The performance parameters studied were the gas composition, tar and particulates in the clean gas, water quality and reactor pressure drop apart from other standard data collection of fuel flow rate, etc. The average gas composition was found to be CO 15 1.0 % H-2 16 +/- 1% CH4 0.5 +/- 0.1 % CO2 12.0 +/- 1.0 % and rest N2 compared to CO 19 +/- 1.0 % H-2 17 +/- 1.0 %, CH4 1 +/- 0.2 %, CO2 12 +/- 1.0 % and rest N2. The tar and particulate content in the clean gas has been found to be about 10 and 12 mg/m3 in both cases. The presence of high ash content material increased the pressure drop with coconut frond compared to woody biomass.

SWEETENING OF BIOGAS IN SPRAY TOWERS FOR POWER GENERATION

This paper presents the experience of the new design of using impinging jet spray columns for scrubbing hydrogen sulfide from biogas that has been developed by Indian Institute of Science and patented. The process uses a chelated polyvalent metal ion which oxidizes the hydrogen sulfide to sulfur as a precipitate. The sulfur generated is filtered and the scrubbing liquid recycled after oxidation. The process involves in bringing contact the sour gas with chelated liquid in the spray columns where H2S reacts with chelated Fe3+ and precipitates as sulfur, whereas Fe3+ gets reduced to Fe2+. Fe2+ is regenerated to Fe3+ by reaction of oxygen in air in a separate packed column. The regenerated liquid is recirculated. Sulfur is filtered and separated as a byproduct. The paper presents the experience in using the spray towers for hydrogen sulfide removal and further use of the clean gas for generating power using gas engines. The maximum allowable limit of H2S for the gas engine is 200 ppm (v/v) in order to prevent any corrosion of engine parts and fouling of the lubricating oil. With the current ISET process, the hydrogen sulfide from the biogas is cleaned to less than 100 ppm (v/v) and the sweet gas is used for power generation. The system is designed for 550 NM3/hr of biogas and inlet H2S concentration of 2.5 %. The inlet concentration of the H2S is about 1 - 1.5 % and average measured outlet concentration is about 30 ppm, with an average gas flow of about 300 - 350 NM3/hr, which is the current gas production rate. The sweet gas is used for power generation in a 1.2 MWe V 12 engine. The average power generation is about 650 - 750 kWe, which is the captive load of the industry. The plant is a CHP (combined heat power) unit with heat from the cylinder cooling and flue being recovered for hot water and steam generation respectively. The specific fuel consumption is 2.29 kWh/m(3) of gas. The system has been in operation for more than 13,000 hours in last one year in the industry. About 8.4 million units of electricity has been generated scrubbing about 2.1 million m3 of gas. Performance of the scrubber and the engine is discussed at daily performance level and also the overall performance with an environment sustenance by precipitating over 27 tons of sulfur.

Neoarchean arc magmatism followed by high-temperature, high-pressure metamorphism in the Nilgiri Block, southern India

The Nilgiri Block, southern India is an exhumed lower crust formed through arc magmatic processes in the Neoarchean. The main lithologies in this terrane include charnockites, gneisses, volcanic tuff, metasediments, banded iron formation and mafic-ultramafic bodies. Mafic-ultramafic rocks are present towards the northern and central part of the Nilgiri Block. We examine the evolution of these mafic granulites/metagabbros by phase diagram modeling and U-Pb sensitive high resolution ion microprobe (SHRIMP) dating. They consist of a garnet-clinopyroxene-plagioclase-hornblende-ilmenite +/- orthopyroxene +/- rutile assemblage. Garnet and clinopyroxene form major constituents with labradorite and orthopyroxene as the main mineral inclusions. Labradorite, identified using Raman analysis, shows typical peaks at 508 cm(-1), 479 cm(-1), 287 cm(-1) and 177 cm(-1). It is stable along with orthopyroxene towards the low-pressure high-temperature region of the granulite fades (M1 stage). Subsequently, orthopyroxene reacted with plagioclase to form the peak garnet + clinopyroxene + rutile assemblage (M2 stage). The final stage is represented by amphibolite facies-hornblende and plagioclase-rim around the garnet-clinopyroxene assemblage (M3 stage). Phase diagram modeling shows that these mafic granulites followed an anticlockwise P-T-t path during their evolution. The initial high-temperature metamorphism (M1 stage) was at 850-900 degrees C and similar to 9 kbar followed by high-pressure granulite fades metamorphism (M2 stage) at 850-900 degrees C and 14-15 kbar. U-Pb isotope studies of zircons using SHRIMP revealed late Neoarchean to early paleoproterozoic ages of crystallization and metamorphism respectively. The age data shows that these mafic granulites have undergone arc magmatism at ca. 25392 +/- 3 Ma and high-temperature, high-pressure metamorphism at ca. 2458.9 +/- 8.6 Ma. Thus our results suggests a late Neoarchean arc magmatism followed by early paleoproterozoic high-temperature, high-pressure granulite facies metamorphism due to the crustal thickening and suturing of the Nilgiri Block onto the Dharwar Craton. (C) 2015 Elsevier B.V. All rights reserved.

Comparación de calidad en la producción de carbón vegetal entre la fosa de tierra y el horno de ladrillo, en la finca el plantel Masaya

La presente investigación tuvo como objetivo comparar la producción de calidad de carbón vegetal entre la fosa de tierra y el horno de ladrillo utilizando Eucalyptus camaldulensis, empleando dos categorías diamétricas. La metodología utilizada consistió en la selección del material vegetal para la producción de carbón, se seleccionaron árboles con diámetros entre 20-30 cm. y mayores de 30 cm. por cada categoría diamétrica se emplearon cinco árboles para un total de diez individuos, se tumbaron los árboles con la técnica de tala dirigida, con hacha a partir de 0.30 cm. del suelo con el propósito de aprovechar la mayor cantidad de madera del árbol, se procedió a medir la longitud de la troza en metros empleando una cinta métrica para la medición del diámetro medio. Luego se procedió a calcular el volumen del fuste limpio utilizando la fórmula de Smalian, posteriormente se traslado trozas y ramas al sitio de carbonización, se depositaron por clase diamétrica donde se cálculo el volumen empleando la fórmula de Huber, para la cubicación de las ramas se empleo el método tradicional de metro estéreo. Para la producción de carbón vegetal se emplearon dos diseños de producción: fosa de tierra y el horno de ladrillos, el análisis de laboratorio consistió en determinar porcentaje de cenizas, carbono orgánico, densidad aparente y porcentaje de humedad. Para la clase diamétrica de 20 a 30 cm., se utilizo un volumen de 4.48 m3 y para la categoría diamétrica mayor de 30 cm, 6.55 m3. Finalizado el proceso de carbonización se obtuvieron 8 sacos en la fosa de tierra, equivalente a 0.217m3, en el horno de ladrillo se obtuvieron 18 sacos lo que representa 0.496 m3. Comparando los estándares de calidad de la FAO, con los obtenidos en este estudio, son aceptables, se concluye que el método de producción de horno de ladrillos usando arboles mayores de 30 cm es el mejor método para la producción de carbón vegetal.

"Evaluación del carbono almacenado en la biomasa y suelo del bosque tropical seco en el municipio de Nandaime, departamento de Granada, Nicaragua"

El dióxido de carbono es el más importante de los Gases de Efecto Invernadero, por la actividad humana, tanto en términos de su cantidad como de su potencial efecto sobre el calentamiento global. Este es producido cuando se usa combustible fósil para generar energía y cuando los bosques son deforestados y quemados. La vegetación arbórea es una fuente y a la vez un sumidero natural de CO2. El presente estudio se realizó en el municipio de Nandaime departamento de Granada 20 10, con el objetivo de evaluar el carbono almacenado en los componentes biomasa aérea, hojarasca y suelo en tres sucesiones de edad (9, 15 y 19 años), en bosque seco tropical. Se hizo un inventario forestal (fustal 200 m2 y latizal 25 m2). Se cortó el árbol promedio en fustales Se pesó y muestreo la biomasa aérea y hojarasca, en las cuales se determinó en laboratorio el porcentaje de humedad y contenido de carbono. La mayor cantidad de árboles fue en la edad de 9 años con 2,366.7 árboles/ha. Los promedios de diámetro en fustal fueron 10.92, 14.7 y 15.97 cm, para 9, 15 y 19 años respectivamente. Los promedios de diámetro en latizal fueron 6.29, 6.41 y 6.43 cm, para 9 15 y 19 años respectivamente. Los promedios de altura en fustal fueron 6.92, 10.21 y 10.78 m, para 9 15 y19 años respectivamente. Los promedios de altura en latizal fueron 5.25, 6.00 y 8.13 m, para 9 15 y19 años respectivamente. La mayor cantidad de área basal y volumen fue en la edad de 9 años con 38.66 m 2/a y 356.83 m3/ha. Según el índice de diversidad Shannon-Wiener y Simpson se determinó que el sitio más diverso en fustal fue la sucesión de 15 años de edad y el menos diverso el nivel de 19 años, en latizal el más diverso fue el de 15 años y el menos diverso el de 19. En la edad 19 años , se cuantifico la mayor cantidad de hojarasca con 5.69 t/ha, pero el mayor contenido de carbono fue en 9 años con 1.11 t/ha. En la edad 9 años, se cuantifico la mayor cantidad de biomasa y carbono en ramas y hojas con 206.82 y 37.49t/ha, respectivamente. Para fuste, se cuantifico la mayor cantidad de biomasa y carbono en la edad de 9 años con 149.98 y 47.63 t/ha, respectivamente. El carbono almacenado en el suelo fueron 22.5, 27.68 y 42.39 t/ha, para 9, 15 y19 años respectivamente. La tasa de fijación de la biomasa aérea fue 9.46, 7.11 y 6.23 t/año, para 9, 15 y 19 años respectivamente.

Estructura, diversidad florística y estimación de carbono almacenado en tres bosques del municipio El Castillo, Río San Juan, Nicaragua, 2012

La planificación y manejo integral de fincas es un mod elo con tendencias productivas, en Nicaragua la ausencia de metodologías sencillas, flexibles, con alta factibilidad económica y confiabilidad de los resultados, es un factor determinante de la aceptación e implementación de los planes de manejo a nivel de finca. El presente estudio se realizó con la finalidad de contribuir información de metodología para inventarios forestales y resultados florísticos en el almacenamiento de carbono, en tres fincas productivas del bosque húmedo tropical del municipio El Castillo, Río San Juan. El estudio se estableció en tres etapas metodológicas: planificación de trabajo, fase de campo y almacenamiento de datos (procesamiento). Para cumplir los objetivos se implementó un inventario forestal por muestreo sistemático con diferentes intensidades de muestreo en cada finca, se establecieron parcelas de 10m x 50m (0.05 ha), para comparar la diversidad entre fincas se utilizó igual tamaño de parcelas (0.3 ha), mediante el índice de Margalef (riqueza) e índice de Shannon-Weiner (equidad), se analizó la estructura horizontal mediante el cálculo de abundancia, área basal y volumen por hectárea, para la estimación de carbono se optó por el método no destructivo utilizando la ecuación general de biomasa (Brown, 1997) y el factor de carbono según IPCC, 2005. Las variables estudiadas son: nombre botánico de la especie arbórea, DAP (1.30m sobre el suelo ) mayor a 10 cm y altura fustal. Se identificaron 31 familias botánicos, 57 géneros y 68 especies, las familias más representativas, según el número de especie son, Moraceae, Rubiaceae, Fabaceae, Sapotaceae, Anonaceae, Burseraceae, Cumbretaceae, Lauraceae, Meliaceae, Vochysiaceae, Mimosaceae, alta presencia de especies indicadoras de bosques alterados o secundarios y bajo número de especies comerciales. No obstante el estudio de muestra alta riqueza en las tres fincas sin diferencias significativas (X²= 0,916; P>0,05) y baja equidad en La Pavona y La Perilla, por el contrario La Primavera presenta mejor representatividad de las especies. El bosque con mayor área basal y volumen (desarrollo estructural), fue La Pavona (26.51 m2ha-1 y 365.39 m3 ha-1), también almacenó mayor carbono por hectárea (195.66Mg C ha-1), básicamente los resultado de carbono son similares entre las tres fincas (La Perilla con 184.38 MgC ha-1 y La Primavera con 192.21 MgC ha-1), también se encontró alta relación entre el estado de desarrollo (clases naturales de edades), abundancia, volumen y el almacenamiento de carbono por la alta cantidad de biomasa.

Parámetros y evaluación genética preliminar de hembras de un hato criollo reyna en el Trópico Seco, Rivas, Nicaragua

Con el objetivo de evaluar el efecto de distintos factores ambientales (año de parto, época de parto y número de parto) sobre el comportamiento productivo de un hato Criollo Reyna y su preliminar categorización genética bajo condiciones de trópico seco en la finca "El Pino" Rivas Nicaragua. En general, se analizaron 470 lactancias provenientes de 155 vacas en el periodo 1998-2005. Las características Producción de leche a 305 días (PL305), producción de leche por día a 305 días (PLDL305) y largo de lactancia (LARLA) fueron analizadas mediante la utilización de modelos lineales fijos que en general incluyeron efectos de año de parto (APART), número de parto (NUMPA), época de parto (EP), Manejo del ordeño (MAN). Los índices de herencia (h2) y constancia (r) para PL305, PLD305 Y LARLA se obtuvieron a partir de modelos lineales mixtos que incluyeron efectos aleatorios de semental (S) y vaca (V), así como los efectos fijos APART, NUMPA, EP, MAN. De los factores ambientales se encontró efecto significativo del APART (P< 0.01) para todas las características al igual que NUMPA, EP y la interacción APART* EP, exceptuando MAN el cual afectó únicamente a LARLA P< 0.01). Se obtuvieron medias de mínimos cuadrados de 1630.56±59.56 kg. 260.24±6.39 días y 5.34±0.19 para (PL305), (LARLA) y PLD305, respectivamente. El parto número 3 mostró los máximos valores (1804.04±67.46) para PL305 días y parto 8 con 273.90±17.49 días para LARLA respectivamente. La EP 2 presentó máximos valores de 1707.93±67.00 kg., 5.59±0.21 kg. y 266.66±7.19 días para PL305, PLDL305 y LARLA, respectivamente. Los APART 1998, 2000 y 2001 mostraron los mayores promedios para PL305, PLDL305, con 1896.37±97.71 kg., 6.21±0.32 kg.; 1963.77±112.65 kg., 6.43 ± 0.36 kg; 1884.90±107.95 kg., 6.18±0.35 kg. respectivamente. El MAN no presentó tendencia definida en su comportamiento. Los valores de repetitividad fueron 0.46±0.05, 0.46±0.05 y 0.078±0.05 y los heredabilidad de 0.25±0.13, 0.253±0.134 y 0.002±0.083, para PL305, PLD305 y LARLA, respectivamente. Del valor genético se pudo constatar la normalidad y distribución de los valores; las vacas en producción con valores genéticos superiores en parte ya estaban identificadas por el productor en su proceso de selección, reflejando así que el sistema de selección del productor ha sido relativamente efectivo. Los promedios de producción de leche obtenidos demuestran la capacidad del Reyna para su explotación en condiciones similares al del lugar de estudio y los parámetros r y h2 revelan claramente la existencia de variabilidad genética, posible de utilizar en mejoramiento genético a mediano y largo plazo para producción de leche.

Comportamiento in vitro de tres variedades de papa (Solanum tuberosum L.) en tres variantes del medio básico de Murashige y Skoog (1962) y tres subcultivos

Actualmente el cultivo de tejidos vegetales como una de las técnicas más modernas en la agricultura, permite obtener elevados volúmenes de material vegetal de buena calidad para la siembra en numerosos cultivos, impactando directamente en el incremento de la calidad y rendimiento de las cosechas. El objetivo del presente trabajo fue evaluar el comportamiento de las variedades de papa Desirée, DT0-28 y Baraka en tres medios de cultivo: Ml (Sales MS + 0.5 mg/l * AIA + 0.2 mg/l Kinetina + 0.2 mg/1 Tiamina-HCL); M2 (Sales MS + 0.2 mg/l Tiamina-HCL) y M3 (Sales MS + 0.25 mg/l **GA3 + 0.2 mg/l Tiamina-HCL) y tres subcultivos continuos. Se evaluaron las variables Altura de plántula, Longitud de entrenudos y Número de hojas. Las tres variedades manifestaron una dinámica de crecimiento muy variada en los medios de cultivo y en los subcultivos, Desirée registró disminución del número de hojas en la medida que incrementaron los subcultivos. Igual tendencia mostró DT0-28. Por el contrario Baraka superó ligeramente el número de hojas en el subcultivo dos al obtenido en el subcultivo uno, alcanzando los valores más altos en el subcultivo tres. Desirée y Baraka presentaron un comportamiento aceptable en el medio dos y DT0-28 en el medio tres. *AlA = Acido lndolAcético **G3 = Acido Giberélico