Estudo de pré-formulação para dose fixa combinada dos tuberculostáticos rifampicina, isoniazida, pirazinamida e etambutol (4 em 1)

According to the global framework regarding new cases of tuberculosis, Brazil appears at the 18th place. Thus, the Ministry of Health has defined this disease as a priority in the governmental policies. As a consequence, studies concerning treatment and prevention have increased. Fixed-dose combination formulations (FDC) are recognized as beneficial and are recommended by WHO, but they present instability and loss on rifampicin bioavailability. The main purpose of this work was to carry out a pre-formulation study with the schedule 1 tuberculosis treatment drugs: rifampicin, isoniazid, pyrazinamide and ethambutol and pharmaceutical excipients (lactose, cellulose, magnesium stearate and talc), in order to develop an FDC product (150 mg of rifampicin + 75 mg of isoniazid + 400 mg of pyrazinamide + 250 mg of ethambutol). The studies consisted of the determination of particle size and distribution (Ferret s diameter) and shape through optical microscopy, as well as rheological and technological properties (bulk and tapped densities, Hausner Factor, Carr s Index, repose angle and flux rate) and interactions among drugs and drug excipient through thermal analysis (DSC, DTA, TG and your derivate). The results showed that, except isoniazid, the other drugs presented poor rheological properties, determined by the physical characteristics of the particles: small size and rod like particles shape for rifampicin; rectangular shape for pyrazinamide and ethambutol, beyond its low density. The 4 drug mixture also not presented flowability, particularly that one containing drug quantity indicated for the formulation of FDC products. In this mixture, isoniazid, that has the best flowability, was added in a lower concentration. The addition of microcrystalline cellulose, magnesium stearate and talc to the drug mixtures improved flowability properties. In DSC analysis probable interactions among drugs were found, supporting the hypothesis of ethambutol and pyrazinamide catalysis of the rifampicin-isoniazid reaction resulting in 3- formylrifamycin isonicotinyl hydrazone (HYD) as a degradation product. In the mixtures containing lactose Supertab® DSC curves evidenced incompatibility among drugs and excipient. In the DSC curves of mixtures containing cellulose MC101®, magnesium stearate and talc, no alterations were observed comparing to the drug profiles. The TG/DTG of the binary and ternary mixtures curves showed different thermogravimetrics profiles relating that observed to the drug isolated, with the thermal decomposition early supporting the evidences of incompatibilities showed in the DSC and DTA curves

Políticas públicas para agricultura familiar: uma avaliação sobre a correspondência do paa e do PRONAF nos territórios da cidadania do Rio Grande do Norte - 2008 a 2010.

Family farming has been considered as the new axis of rural development in the country, the focus of several public policies, especially the National Program for Strengthening Family Agriculture - PRONAF and Food Purchase Program - PAA. PRONAF was created with the aim of providing credit to farmers, while the PAA to support family farmers through the purchase of its production. In this context, the objective of this study is to analyze the correspondence of these two public policies for family farming, in the Territories of Citizenship of the state of Rio Grande do Norte, between the years 2008 to 2010. In the methodology, the analysis was performed by comparing the distributions of the two programs in the territories of citizenship status. There were also statistical tests of differences in proportions, and Spearman correlations, and estimated a logit regression model, in order to measure the probability of a farmer participating in the PAA is associated with one of the modes of PRONAF. The data used were obtained from the National and Supply - CONAB at the Institute of Technical Assistance and Rural Extension - EMATER, and the Ministry of Agrarian Development - MDA. Among the key findings was noted that policies were associated with a direct, but low in the districts of the Territories of Citizenship. And that, in the years 2008 and 2009, only in the territories of Mato Grande, Alto Oeste and Seridó, the actions of PAA and PRONAF had direct and significant correlations. It was found that in most of the territories, policies are performed randomly, ie that both have no correlation to each other. The estimates of the logit model showed that the chance of a family farmer, the PAA participant, receive credits PRONAF A, is higher in the territory of Mato Grande, and would have a chance to fall in PRONAF B in all areas surveyed. Moreover, farmers in the territories of the Assu-Mossoró, Sertão of Apodi, Seridó and Alto Oeste, participating in the PAA would be more likely to receive credits PRONAF C, reflecting thus the family farm more consolidated these territories

Tipos de substratos para germinação de sementes de palmeira- real-australiana (Archontophoenix alexandrae H. Wendl. & Drude)

Os objetivos deste trabalho foram avaliar o desempenho germinativo de sementes de palmeira-australiana em diferentes substratos e estabelecer a granulometria e intensidade de umedecimento adequado. A semeadura foi realizada com quatro repetições de 25 sementes em solo, areia, rolo de papel e em vermiculita de diferentes granulometrias: mícron (0,15-0,20 mm), superfina (0,21-0,30 mm), fina (0,30-0,50 mm) e média (1,19-0,50 mm), umedecidas com 0,5; 1,0; 1,5; e 2,0 vezes o seu peso em água. O teste de germinação foi conduzido a 20-30 °C, avaliando-se a primeira contagem do teste aos sete dias após a semeadura e, semanalmente, a germinação (plântulas normais) até os 35 dias, quando foram contabilizadas, também, as plântulas anormais e as sementes mortas. Calcularam-se o tempo médio e frequência relativa de germinação. A vermiculita mícron umedecida com uma vez o seu peso em água apresentou o melhor desempenho como substrato para o teste de germinação de sementes de palmeira-real-australiana, por possibilitar a máxima germinação das sementes (90%) e velocidade de germinação, demandando tempo médio de 15,3 dias nesse processo.

Manejo mecânico e cultura de cobertura na entrelinha da seringueira (PB 235 e RRIM 701) e os atributos físicos de um latossolo vermelho no Planalto Paulista

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Vermiculita como substrato para o teste de germinação de sementes de ipê-amarelo

Vermiculite is a substrate used in seedling production of forest species and can be an option for the germination test of ipe seeds. The objective of this research was to evaluate the use of vermiculite in the germination test of Tabebuia chrysotricha seeds and to stablish appropriate particle size and moisture for this substrate. Four replications of 20 seeds were sown in soil, sand, paper rolls, and vermiculite with different particle sizes: micron (0.15-0.20 mm), superthin (0.21-0.30 mm), thin (0.30-0.50 mm) and medium (0.50-1.19 mm) moistened with water equivalent to 0.5, 1.0, 1.5 and 2.0 times the weight of the dry subtrate. Germination test was carried out at 30 degrees C. The percentage of normal seedlings was obtained seven days after sowing (first count) and then weekly until 28 days, when abnormal seedlings and dead seeds were also counted. It was concluded that the germination test of ipe seeds can be carried out with thin or medium vermiculite moistened with water equivalent to 1.5 times the dry weight of the substrate. These treatments resulted in higher and faster germination (21 days).

Caracterização física e química de áreas mineradas pela extração de cassiterita

O objetivo deste trabalho foi caracterizar as diferenças ocorridas, após a atividade da mineração de cassiterita, em uma área de floresta amazônica. As amostras foram coletadas, superficialmente, em área de mineração de cassiterita na Floresta Nacional do Jamari (RO), ao longo de uma linha compreendendo: floresta, capoeira, piso de lavra, área de deposição de rejeito seco e área de deposição de rejeito úmido. em cada situação descrita foram coletadas cinco amostras, que serviram como repetição, totalizando 25. Nas amostras coletadas foram realizadas análises físicas e químicas. O processo de extração de cassiterita promoveu alterações significativas nos atributos dos solos estudados. A matéria orgânica, o fósforo disponível, a densidade de partículas e a resistência à penetração foram os mais alterados pelo processo de supressão da vegetação original e extração do minério.

Alterações nos atributos químicos de um Latossolo distroférrico decorrentes da granulometria e doses de calcário em sistemas plantio direto e convencional

Atualmente, percebe-se o interesse na calagem superficial, sem prévia incorporação, para instalação do sistema plantio direto (SPD). Dessa forma, objetivou-se determinar os efeitos de granulometria e doses de calcários no SPD, em fase de implantação, e no sistema de plantio convencional (SPC) sobre o pH, H + Al, Ca2+ e Mg2+. O experimento foi realizado no ano agrícola de 1998/99, na FCA/UNESP-Botucatu (SP), em Latossolo Vermelho. O delineamento experimental foi de blocos ao acaso, com parcelas subsubdivididas e quatro repetições. As parcelas representaram os sistemas de plantio (SPD e SPC); as subparcelas, a granulometria dos calcários [grosso (PRNT = 56 %) e fino (PRNT = 90 %)], e as subsubparcelas, as doses de 2, 4 e 6 t ha-1 (calcário grosso) e 1,2; 2,4 e 3,6 t ha-1 (fino). O solo foi amostrado, a 0-5, 5-10, 10-20 e 20-40 cm de profundidade, 1, 3 e 12 meses após a aplicação dos corretivos. A análise de variância não detectou interação tripla entre os fatores. A aplicação de calcário superficial no SPD, independentemente da granulometria e da dose, alterou positivamente os atributos químicos do solo (0-5 e 5-10 cm), 12 meses após a calagem. O corretivo continuou reagindo, independentemente do sistema de plantio, de forma intensa, mesmo após três meses. A aplicação de doses mais elevadas de calcário, com maior granulometria, sugeriu efeito residual prolongado.

Desenvolvimento de sistemas micro e nanoestruturados de quitosana/MDI para aplicações cosméticas

Currently, studies in the area of polymeric microcapsules and nanocapsules and controlled release are considerably advanced. This work aims the study and development of microcapsules and nanocapsules from Chitosan/MDI, using a new technique of interfacial polycondensation combined to spontaneous emulsification, for encapsulation of BZ-3. It was firstly elaborated an experimental design of 23 of the particle in white without the presence of BZ-3 and Miglyol, where the variables were the concentrations of MDI, chitosan and solvent. Starting from the data supplied by the experimental design was chosen the experiment with smaller particle diameter and only added like this BZ-3 and Miglyol. The suspension containing concentrations of 6.25 mg/mL, 12.5 mg/mL, 18.75 mg/mL, 25 mg/mL of BZ-3 were prepared, nevertheless, during the storage time, these formulations presented drug precipitates in the suspensions of 18.75 mg/mL and 25 mg/mL of BZ-3. This apparition of precipitate was attributed to the diffusion of BZ-3 for the aqueous phase without any encapsulation, suggesting so the use of the smaller concentrations of the BZ-3. The suspension containing 6.25mg/mL of BZ3 presented average size of 1.47μm, zeta potential of 61 mV, pH 5.64 and this sample showed an amount of BZ-3 and drug entrapment of 100 %. The suspension containing 12.5mg/mL of BZ-3 presented average size of 1.76μm, zeta potential of 47.4 mV, pH 5.71 and this sample showed an amount of BZ-3 and drug entrapment of 100 %. Then, showing such important characteristics, these two formulations were chosen for futher continuity to the study. These formulations were also characterized by the morphology, FTIR, stability for Turbiscan, DSC and a study of controlled release of the BZ-3 was elaborated in different receiving means

Influência do teor e granulometria da calcita e da temperatura de sinterização no desenvolvimento de massas cerâmicas para revestimento poroso(BIII)

This work aims at studying the influence of the concentration of calcite, its grain size and sintering temperature to obtain porous coating formulations that meet the design specifications. The experiments involved the physical-chemical and mineralogical caracterization of the raw materials, and mechanical tests on specimens dried and sintered, performing a planning mixture and factorial experiment, using the response surface methodology. The ceramic bodies studied were prepared by dry process, characterized, placed in conformity by uniaxial pressing and sintered at temperatures of 940 º C, 1000ºC, 1060ºC, 1120°C and 1180°C using a fast-firing cycle. The crystalline phases formed during sintering at temperatures under study, revealed the presence of anorthite and wolastonite, and quartz-phase remaining. These phases were mainly responsible for the physical and mechanical properties of the sintered especimens. The results shown that as increases the participation of carbonate in the composition of ceramic bodies there is an increase of water absorption and a slight reduction in linear shrinkage for all sintering temperatures. As for the mechanical strength it was observed that it tended to decrease for sintering at temperatures between 940 ° C and 1060 ° C and to increase for sintering at temperatures above 1060 ° C occurring with greater intensity for compositions with higher content of calcite. The resistence decreased with increasing participation of quartz in all sintering temperatures. The decrease in grain size of calcite caused a slight increase in water absorption for formulation with the same concentration of carbonate, remaining virtually unchanged the results of linear shrinkage and mechanical strength. In conclusion, porous ceramic coating (BIII) can be obtained using high concentrations of calcite and keeping the properties required in technical standards and that the particle size of calcite can be used as tuning parameter for the properties of ceramic products.

Aplicações da q-Álgebra em física da matéria condensada

We address the generalization of thermodynamic quantity q-deformed by q-algebra that describes a general algebra for bosons and fermions . The motivation for our study stems from an interest to strengthen our initial ideas, and a possible experimental application. On our journey, we met a generalization of the recently proposed formalism of the q-calculus, which is the application of a generalized sequence described by two parameters deformation positive real independent and q1 and q2, known for Fibonacci oscillators . We apply the wellknown problem of Landau diamagnetism immersed in a space D-dimensional, which still generates good discussions by its nature, and dependence with the number of dimensions D, enables us future extend its application to systems extra-dimensional, such as Modern Cosmology, Particle Physics and String Theory. We compare our results with some experimentally obtained performing major equity. We also use the formalism of the oscillators to Einstein and Debye solid, strengthening the interpretation of the q-deformation acting as a factor of disturbance or impurity in a given system, modifying the properties of the same. Our results show that the insertion of two parameters of disorder, allowed a wider range of adjustment , i.e., enabling change only the desired property, e.g., the thermal conductivity of a same element without the waste essence

IFTrace: Video segmentation of deformable objects using the Image Foresting Transform

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Saúde física e emocional de cuidadores da cidade de Santa Cruz-RN: perfil epidemiológico e fatores associados

Taking care for an impaired elderly is a hard and costly task that could affect directly the caregiver health. The purpose of this study was to evaluate the physical and mental health of elderly caregivers from the city of Santa Cruz-RN and analyze the potential correlated factors through an observational analytic design of a crosssectional. A multidimensional questionnaire was used to evaluation of the social demographics characteristics and those related to the care activity, as well as the caregivers´ physical and mental health. It was realized a descriptive analyze using frequency distribution and measures of the central tendency and dispersion to description of the caregivers. To verify the magnitude of the association between the variables was used the bivariate analysis through the Pearson and Spearman correlations and qui-square test. To evaluation of the association of the correlated factors to the adverse outcome with the caregivers´ physical and mental health was made a multivariate analysis by logistic binary regression and multiple linear regression models. The final sample was constituted by 304 persons, mostly women with a mean age of 50.3 ±16.8 years. The principal factors related to the physical health were age, stress and life satisfaction. Be a male caregiver, caring for a little while the elderly with cognitive deficit and not been spouse were related to worse mental health. Have worse physical health, high stress, depressive symptomatology, burden and low levels of satisfaction were also related to the mental health. After adjust through multiple linear regression was observed R2 values of R2=0,21 for Stress, R2 =0,17 for Depressive Symptomatology, R2 =0,21 for Burden and R2 =0,16 for Satisfaction. The attainment of the factors associated with caregiver´s health can help in the elaboration of specifics politics witch the goal is the integral attention to the elderly and his caregiver. The inability of continuous taking care could result in adverse outcomes such as institutionalization, impairment and death

Analysis of Semi-solid Processing for Metal Matrix Composite Synthesis Using Factorial Design

The main goal in this work is to conduct a quantitative analysis of the mechanical stir casting process for obtaining particulate metal matrix composites. A combined route of stirring at semi-solid state followed by stirring at liquid state is proposed. A fractional factorial design was developed to investigate the influence and interactions of factors as: time, rotation, initial fraction and particle size, on the incorporated fraction. The best incorporations were obtained with all factors at high levels, as well as that very long stirring periods have no strong influence being particle size and rotation the most important factors on the incorporated fraction. Particle wetting occurs during stirring at semisolid state, highlighting the importance of the interactions between particles and the alloy globularized phase. The role of the alloying element Mg as a wettability-promoting agent is discussed. The shear forces resulting from the stirring system is emphasized and understood as the effect of rotation itself added to the propeller blade geometry.

Open photoacoustic cell for thermal diffusivity measurements of a fast hardening cement used in dental restoring

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Aspectos da produtividade do feijão correlacionados com atributos físicos do solo sob elevado nível tecnológico de manejo

No ano agrícola de 2006/07, no município de Selvíria (MS), foi analisada a produtividade do feijão em função de alguns atributos físicos de um Latossolo Vermelho distroférrico, cultivado nas condições de elevado nível tecnológico de manejo pelo sistema plantio direto irrigado com pivô central. O objetivo foi selecionar, entre os atributos pesquisados do solo, aquele com a melhor representatividade para explicar a variabilidade da produtividade agrícola. Foi instalada a malha geoestatística, para a coleta de dados do solo e da planta, com 117 pontos amostrais, numa área de 2.025 m² e declive homogêneo de 0,055 m m-1. do ponto de vista linear e espacial, a produtividade de feijão foi explicada em função da densidade de partículas e da umidade gravimétrica do solo, respectivamente. Assim, os valores de densidade de partículas entre 1,95 e 2,20 kg dm-3 e de umidade gravimétrica entre 0,205 e 0,239 kg kg-1; ambas coletadas na camada intermediária, resultaram em sítios com as mais elevadas produtividades (2.200-2.600 kg ha-1). Entretanto, para as condições do elevado nível tecnológico de manejo empregado, a produtividade média do feijão não atingiu seu máximo potencial, uma vez que o agravado estado de compactação no qual o solo se encontrava proporcionou à produtividade redução de 26,6 %. Dessa forma, os valores médios da densidade do solo e da resistência do solo à penetração, respectivamente nas faixas de 1,36-1,41 kg dm-3 e de 1,56-3,24 MPa, típicos de solos argilosos compactados, atestaram a substancial queda da produtividade de grãos de feijão.