THE USE OF LIFE-CYCLE ANALYSIS TO REDUCE THE ENVIRONMENTAL IMPACT OF MATERIALS IN MANUFACTURING

This thesis is composed of three life-cycle analysis (LCA) studies of manufacturing to determine cumulative energy demand (CED) and greenhouse gas emissions (GHG). The methods proposed could reduce the environmental impact by reducing the CED in three manufacturing processes. First, industrial symbiosis is proposed and a LCA is performed on both conventional 1 GW-scaled hydrogenated amorphous silicon (a-Si:H)-based single junction and a-Si:H/microcrystalline-Si:H tandem cell solar PV manufacturing plants and such plants coupled to silane recycling plants. Using a recycling process that results in a silane loss of only 17 versus 85 percent, this results in a CED savings of 81,700 GJ and 290,000 GJ per year for single and tandem junction plants, respectively. This recycling process reduces the cost of raw silane by 68 percent, or approximately $22.6 and $79 million per year for a single and tandem 1 GW PV production facility, respectively. The results show environmental benefits of silane recycling centered around a-Si:H-based PV manufacturing plants. Second, an open-source self-replicating rapid prototype or 3-D printer, the RepRap, has the potential to reduce the environmental impact of manufacturing of polymer-based products, using distributed manufacturing paradigm, which is further minimized by the use of PV and improvements in PV manufacturing. Using 3-D printers for manufacturing provides the ability to ultra-customize products and to change fill composition, which increases material efficiency. An LCA was performed on three polymer-based products to determine the CED and GHG from conventional large-scale production and are compared to experimental measurements on a RepRap producing identical products with ABS and PLA. The results of this LCA study indicate that the CED of manufacturing polymer products can possibly be reduced using distributed manufacturing with existing 3-D printers under 89% fill and reduced even further with a solar photovoltaic system. The results indicate that the ability of RepRaps to vary fill has the potential to diminish environmental impact on many products. Third, one additional way to improve the environmental performance of this distributed manufacturing system is to create the polymer filament feedstock for 3-D printers using post-consumer plastic bottles. An LCA was performed on the recycling of high density polyethylene (HDPE) using the RecycleBot. The results of the LCA showed that distributed recycling has a lower CED than the best-case scenario used for centralized recycling. If this process is applied to the HDPE currently recycled in the U.S., more than 100 million MJ of energy could be conserved per annum along with significant reductions in GHG. This presents a novel path to a future of distributed manufacturing suited for both the developed and developing world with reduced environmental impact. From improving manufacturing in the photovoltaic industry with the use of recycling to recycling and manufacturing plastic products within our own homes, each step reduces the impact on the environment. The three coupled projects presented here show a clear potential to reduce the environmental impact of manufacturing and other processes by implementing complimenting systems, which have environmental benefits of their own in order to achieve a compounding effect of reduced CED and GHG.

Radiation metabolomics. 3. Biomarker discovery in the urine of gamma-irradiated rats using a simplified metabolomics protocol of gas chromatography-mass spectrometry combined with random forests machine learning algorithm

Abstract Radiation metabolomics employing mass spectral technologies represents a plausible means of high-throughput minimally invasive radiation biodosimetry. A simplified metabolomics protocol is described that employs ubiquitous gas chromatography-mass spectrometry and open source software including random forests machine learning algorithm to uncover latent biomarkers of 3 Gy gamma radiation in rats. Urine was collected from six male Wistar rats and six sham-irradiated controls for 7 days, 4 prior to irradiation and 3 after irradiation. Water and food consumption, urine volume, body weight, and sodium, potassium, calcium, chloride, phosphate and urea excretion showed major effects from exposure to gamma radiation. The metabolomics protocol uncovered several urinary metabolites that were significantly up-regulated (glyoxylate, threonate, thymine, uracil, p-cresol) and down-regulated (citrate, 2-oxoglutarate, adipate, pimelate, suberate, azelaate) as a result of radiation exposure. Thymine and uracil were shown to derive largely from thymidine and 2'-deoxyuridine, which are known radiation biomarkers in the mouse. The radiation metabolomic phenotype in rats appeared to derive from oxidative stress and effects on kidney function. Gas chromatography-mass spectrometry is a promising platform on which to develop the field of radiation metabolomics further and to assist in the design of instrumentation for use in detecting biological consequences of environmental radiation release.

Selecting control genes for RT-QPCR using public microarray data

BACKGROUND: Gene expression analysis has emerged as a major biological research area, with real-time quantitative reverse transcription PCR (RT-QPCR) being one of the most accurate and widely used techniques for expression profiling of selected genes. In order to obtain results that are comparable across assays, a stable normalization strategy is required. In general, the normalization of PCR measurements between different samples uses one to several control genes (e.g. housekeeping genes), from which a baseline reference level is constructed. Thus, the choice of the control genes is of utmost importance, yet there is not a generally accepted standard technique for screening a large number of candidates and identifying the best ones. RESULTS: We propose a novel approach for scoring and ranking candidate genes for their suitability as control genes. Our approach relies on publicly available microarray data and allows the combination of multiple data sets originating from different platforms and/or representing different pathologies. The use of microarray data allows the screening of tens of thousands of genes, producing very comprehensive lists of candidates. We also provide two lists of candidate control genes: one which is breast cancer-specific and one with more general applicability. Two genes from the breast cancer list which had not been previously used as control genes are identified and validated by RT-QPCR. Open source R functions are available at http://www.isrec.isb-sib.ch/~vpopovic/research/ CONCLUSION: We proposed a new method for identifying candidate control genes for RT-QPCR which was able to rank thousands of genes according to some predefined suitability criteria and we applied it to the case of breast cancer. We also empirically showed that translating the results from microarray to PCR platform was achievable.

Kostenorientiertes Controlling von E-Learning-Plattformen mit dem TCO-Konzept

Zur administrativen Unterstützung von Lehr- und Lernprozessen werden E-Learning-Plattformen eingesetzt, die auf der Grundlage des Internet Funktionen zur Distribution von Lehr- und Lernmaterialien und zur Kommunikation zwischen Lehrenden und Lernenden anbieten. Zahlreiche wissenschaftliche Beiträge und Marktstudien beschäftigen sich mit der multikriteriellen Evaluation dieser Softwareprodukte zur informatorischen Fundierung strategischer Investitionsentscheidungen. Demgegenüber werden Instrumente zum kostenorientierten Controlling von E-Learning-Plattformen allenfalls marginal thematisiert. Dieser Beitrag greift daher das Konzept der Total Cost of Ownership (TCO) auf, das einen methodischen Ansatzpunkt zur Schaffung von Kostentransparenz von E-Learning-Plattformen bildet. Aufbauend auf den konzeptionellen Grundlagen werden Problembereiche und Anwendungspotenziale für das kostenorientierte Controlling von LMS identifiziert. Zur softwaregestützten Konstruktion und Analyse von TCO-Modellen wird das Open Source-Werkzeug TCO-Tool eingeführt und seine Anwendung anhand eines synthetischen Fallbeispiels erörtert. Abschließend erfolgt die Identifikation weiterführender Entwicklungsperspektiven des TCO-Konzepts im Kontext des E-Learning. Die dargestellte Thematik ist nicht nur von theoretischem Interesse, sondern adressiert auch den steigenden Bedarf von Akteuren aus der Bildungspraxis nach Instrumenten zur informatorischen Fundierung von Investitions- und Desinvestitionsentscheidungen im Umfeld des E-Learning.

MetaCampus REAL – ein europäischer Marktplatz für E-Learning Leistungen

This article addresses the discussion about open source solutions in the e-learning business. In contrast to critics by commercial suppliers this article comes to different conclusions. On the one hand such a discussion seems to be useless in this early state of the e-learning market. On the other hand solutions without costs might have a strong influence of which commercial suppliers could profit as well.

MetaCampus REAL – a European Marketplace for Lifelong Learning

This article addresses the discussion about open source solutions in the e-learning business. In contrast to critics by commercial suppliers this article comes to different conclusions. On the one hand such a discussion seems to be useless in this early state of the e-learning market. On the other hand solutions without costs might have a strong influence of which commercial suppliers could profit as well.

Stud.IP and ILIAS in an EU-Funded Project for the Middle East

In autumn 2005 InWEnt (Internationale Weiterbildung und Entwicklung/Capacity Building International gGmbH) on behalf of the EU invited to tender for three web based trainings (WBT). The precondition: either the open-source-platform Stud.IP or ILIAS should be used. The company data-quest decided not to offer the use of either Stud.IP or ILIAS, but both in combination - and won the contract. Several month later, the new learning environment with the combined powers of Stud.IP and ILIAS was ready to serve WBT-participants from all over the world. The following text describes the EU-Project "Efficient Management of Wastewater, its Treatment and Reuse in the Mediterranean Countries" (EMWater), the WBT concept and the experiences with the new Stud.IP-ILIAS-interface.

Stud.IP

Dieser Beitrag beschreibt die Konzeption, den Funktionsumfang und Erfahrungswerte der Open-Source-eLearning-Plattform Stud.IP. Der Funktionsumfang umfasst für jede einzelne Veranstaltung Ablaufpläne, das Hochladen von Hausarbeiten, Diskussionsforen, persönliche Homepages, Chaträume u.v.a. Ziel ist es hierbei, eine Infrastruktur des Lehrens und Lernens anzubieten, die dem Stand der Technik entspricht. Wissenschaftliche Einrichtungen finden zudem eine leistungsstarke Umgebung zur Verwaltung ihres Personals, Pflege ihrer Webseiten und der automatischer Erstellung von Veranstaltungs- oder Personallisten vor. Betreiber können auf ein verlässliches Supportsystem zugreifen, dass sie an der Weiterentwicklung durch die Entwickler- und Betreiber-Community teilhaben lässt.

Virtual Electrophysiology with SPatch

SPatch is an open source virtual laboratory designed to perform simulated electrophysiological experiments without the technical difficulties inherent to laboratory work. It provides the core equipment necessary for recording neuronal activity and allows the user to install the equipment, design their own protocols, prepare solutions to bathe the preparation or to fill the electrodes, and gather data. Assistance is provided for most steps with predefined components that are appropriate to a range of standard procedures. Experiments that can be performed with SPatch at present concern the study of voltage-gated channels in isolated neurons. This allows understanding the ionic mechanisms of Na+ and Ca2+ action potentials, after spike hyperpolarization, pacemaker tonic or bursting activity of neurons, delayed or sustained or adaptive firing of neurons in response to a depolarization, spontaneous depolarization of the membrane following an hyperpolarization, etc. In an educational context, the main interest of SPatch is to allow students to focus on the concepts and thought processes of electrophysiological investigation without the high equipment costs and extensive training required to perform laboratory work. It can be used to acquaint students with the relevant procedures before starting work in a real lab, or to give students an understanding of single neuron behavior and the ways it can be studied without requiring practical work. We illustrate the function and use of SPatch, explore educational issues arising from the inevitable differences between simulated and real laboratory work, and outline possible improvements.

Teaching Cognitive Modeling Using PDP++

PDP++ is a freely available, open source software package designed to support the development, simulation, and analysis of research-grade connectionist models of cognitive processes. It supports most popular parallel distributed processing paradigms and artificial neural network architectures, and it also provides an implementation of the LEABRA computational cognitive neuroscience framework. Models are typically constructed and examined using the PDP++ graphical user interface, but the system may also be extended through the incorporation of user-written C++ code. This article briefly reviews the features of PDP++, focusing on its utility for teaching cognitive modeling concepts and skills to university undergraduate and graduate students. An informal evaluation of the software as a pedagogical tool is provided, based on the author’s classroom experiences at three research universities and several conference-hosted tutorials.

Simulation von Förderprozessen bei Vibrationsförderanlagen

Die erzielbare Fördergeschwindigkeit bei Vibrationsförderern hängt maßgeblich von der Bewegungsfunktion des Förderorganes ab. Für die gezielte Simulation dieser Anlagen mittels der diskreten Elemente Methode (DEM) ist es notwendig die geometrisch vernetzen Förderorgannachbildungen mit praxisrelevanten Bewegungsfunktionen zu beaufschlagen. Der Artikel beschreibt die Einbindung dieser Bewegungsfunktionen in die quellenoffene DEM-Software LIGGGHTS. Während des Simulationsprozesses wird eine Bewegung vernetzter CAD-Modelle durch trigonometrische Reihen ermöglicht.

Transnational Law for Transnational Communities The Emergence of a Lex Mercatoria (or Lex Informatica) for International Creative Communities

Open Source Communities and content-oriented projects (Creative Commons etc.) have reached a new level of economic and cultural significance in some areas of the Internet ecosystem. These communities have developed their own set of legal rules covering licensing issues, intellectual property management, project governance rules etc. Typical Open Source licenses and project rules are written without any reference to national law. This paper considers the question whether these license contracts and other legal rules are to be qualified as a lex mercatoria (or lex informatica) of these communities.

“Advertising Psychology – The Blog Seminar”.

The aim of the web-based course “Advertising Psychology – The Blog Seminar” was to offer a contemporary teaching design using typical Web 2.0 characteristics such as comments, discussions and social media integration which covers facebook and Twitter support, as nowadays, this is a common part of students’ everyday life. This weblog (blog)-based seminar for Advertising Psychology was set up in order to make the course accessible to students from different campuses in the Ruhr metropolitan area. The technical aspect of the open-source content management system Drupal 6.0 and the didactical course structure, based on Merrill’s five first principles of instruction, are introduced. To date, this blog seminar has been conducted three times with a total of 84 participants, who were asked to rate the course according to the benefits of different didactical elements and with regard to Kirkpatrick’s levels of evaluation model. This model covers a) reactions such as reported enjoyment, perceived usefulness and perceived difficulty, and b) effects on learning through the subjectively reported increase in knowledge and attitude towards the seminar. Overall, the blog seminar was evaluated very positively and can be considered as providing support for achieving the learning objectives. However, a successful blended learning approach should always be tailored to the learning contents and the environment.

Vergleich von Softwarelösungen für die Ökobilanzierung – eine softwareergonomische Analyse

Ökobilanzierung von Produktsystemen dient der Abschätzung ihrer Wirkung auf die Umwelt. Eine vollständige Lebenswegbetrachtung erfordert auch die Einbeziehung intralogistischer Transportprozesse bzw. -mittel. Für die Erstellung von Ökobilanzen wird i. d. R. ein Computerprogramm verwendet. Die Demoversionen dreier kommerzieller Softwarelösungen (SimaPro, GaBi und Umberto NXT LCA) und die Vollversion einer Open Source Software (openLCA) wurden aus softwareergonomischer Sicht analysiert. Hierzu erfolgte u. a. der Nachbau der bereitgestellten Tutorials bzw. die Modellierung eigener Produktsysteme. Im Rahmen der Analyse wurden die Punkte • Entstehung, Verbreitung, Zielgruppe, • Eignung der Tutorials, Erlernbarkeit, • Grafische Benutzeroberfläche, Individualisierbarkeit der Software, • Umsetzung der Anforderungen aus den Ökobilanzierungsnormen, • Notwendige Arbeitsschritte zur Erstellung einer Ökobilanz einer vergleichenden Betrachtung unterzogen. Der Beitrag beinhaltet eine Einführung in die wesentlichen Prinzipien der Ökobilanzierung und die Grundsätze der Softwareergonomie. Diese werden zu softwareergonomischen Eigenschaften für Ökobilanzsoftwarelösungen subsumiert. Anschließend werden die Ergebnisse des Softwarevergleiches dargestellt. Abschließend erfolgt eine Zusammenfassung der Erkenntnisse.

A Qualitative Study on the Adoption of Copyright Assignment Agreements (CAA) and Copyright License Agreements (CLA) within Selected FOSS Projects

Open source software projects are multi-collaborative works incorporating the contributions of numerous developers who, in spite of publishing their code under a public license such as GPL, Apache or BSD, retain the copyright in their contributions. Having multiple copyright-owners can make the steering of a project difficult, if not impossible, as there is no ultimate authority able to take decisions relating to the maintenance and use of the project. This predicament can be remedied by centring the dispersed copyrights in a single authority via contributor agreements. Whether to introduce contributor agreements, and if so in which form, is a pressing question for many emerging, but also for established projects. The current paper provides an insight into the ethos of different projects and their reason for adopting or rejecting particular contributor agreements. It further examines the exact set-up of the contributor agreements used and concludes that smart drafting can blur the difference between CAAs and CLAs to a considerable extent, manoeuvring them into a legal grey area. To avoid costly litigation to test the legal enforceability of individual clauses, this paper proposes the establishment of an international committee comprised of developers, product managers and lawyers interested in finding a common terminology that may serve as a foundation for every contributor agreement