Magnetic and Acoustic Investigations of Turbulent Spherical Couette Flow

Title of dissertation: MAGNETIC AND ACOUSTIC INVESTIGATIONS OF TURBULENT SPHERICAL COUETTE FLOW Matthew M. Adams, Doctor of Philosophy, 2016 Dissertation directed by: Professor Daniel Lathrop Department of Physics This dissertation describes experiments in spherical Couette devices, using both gas and liquid sodium. The experimental geometry is motivated by the Earth's outer core, the seat of the geodynamo, and consists of an outer spherical shell and an inner sphere, both of which can be rotated independently to drive a shear flow in the fluid lying between them. In the case of experiments with liquid sodium, we apply DC axial magnetic fields, with a dominant dipole or quadrupole component, to the system. We measure the magnetic field induced by the flow of liquid sodium using an external array of Hall effect magnetic field probes, as well as two probes inserted into the fluid volume. This gives information about possible velocity patterns present, and we extend previous work categorizing flow states, noting further information that can be extracted from the induced field measurements. The limitations due to a lack of direct velocity measurements prompted us to work on developing the technique of using acoustic modes to measure zonal flows. Using gas as the working fluid in our 60~cm diameter spherical Couette experiment, we identified acoustic modes of the container, and obtained excellent agreement with theoretical predictions. For the case of uniform rotation of the system, we compared the acoustic mode frequency splittings with theoretical predictions for solid body flow, and obtained excellent agreement. This gave us confidence in extending this work to the case of differential rotation, with a turbulent flow state. Using the measured splittings for this case, our colleagues performed an inversion to infer the pattern of zonal velocities within the flow, the first such inversion in a rotating laboratory experiment. This technique holds promise for use in liquid sodium experiments, for which zonal flow measurements have historically been challenging.

Fluidic flow delay by ionogel passive pumps in microfluidic paper-based analytical devices

[EN] A new concept for fluid flow manipulation in microfluidic paper-based analytical devices (m-PADs) is presented by introducing ionogel materials as passive pumps. m-PADs were fabricated using a new doubleside contact stamping process and ionogels were precisely photopolymerised at the inlet of the m-PADs.The ionogels remain mainly on the surface of the paper and get absorbed in the superficial paper-fibers allowing for the liquid to flow from the ionogel into the paper easily. As a proof of concept the fluid flowand mixing behaviour of two different ionogels mPADs were compared with the non-treated mPADs.It was demonstrated that both ionogels highly affect the fluid flow by delaying the flow due to their different physical and chemical properties and water holding capacities.

Low cost 3D global instability analysis and flow sensitivity based on dynamic mode decomposition and high-order numerical tools

We explore the recently developed snapshot-based dynamic mode decomposition (DMD) technique, a matrix-free Arnoldi type method, to predict 3D linear global flow instabilities. We apply the DMD technique to flows confined in an L-shaped cavity and compare the resulting modes to their counterparts issued from classic, matrix forming, linear instability analysis (i.e. BiGlobal approach) and direct numerical simulations. Results show that the DMD technique, which uses snapshots generated by a 3D non-linear incompressible discontinuous Galerkin Navier?Stokes solver, provides very similar results to classical linear instability analysis techniques. In addition, we compare DMD results issued from non-linear and linearised Navier?Stokes solvers, showing that linearisation is not necessary (i.e. base flow not required) to obtain linear modes, as long as the analysis is restricted to the exponential growth regime, that is, flow regime governed by the linearised Navier?Stokes equations, and showing the potential of this type of analysis based on snapshots to general purpose CFD codes, without need of modifications. Finally, this work shows that the DMD technique can provide three-dimensional direct and adjoint modes through snapshots provided by the linearised and adjoint linearised Navier?Stokes equations advanced in time. Subsequently, these modes are used to provide structural sensitivity maps and sensitivity to base flow modification information for 3D flows and complex geometries, at an affordable computational cost. The information provided by the sensitivity study is used to modify the L-shaped geometry and control the most unstable 3D mode.

Comparison of Hydrologic and Hydraulic Characteristics of the Anacostia River to Non-Urban Coastal Streams

Streams in urban areas often utilize channelization and other bank erosion control measures to improve flood conveyance, reduce channel migration, and overbank flooding. This leads to reductions in evapotranspiration and sediment storage on floodplains. The purpose of this study is to quantify the evapotranspiration and sediment transport capacity in the Anacostia Watershed, a large Coastal Plain urban watershed, and to compare these processes to a similar sized non-urban watershed. Times series data of hydrologic and hydraulic changes in the Anacostia, as urbanization progressed between 1939-2014, were also analyzed. The data indicates lower values of warm season runoff in the non-urban stream, suggesting a shift from evapotranspiration to runoff in urban streams. Channelization in the Anacostia also increased flow velocities and decreased high flow width. The high velocities associated with channelization and the removal of floodplain storage sites allows for the continued downstream transport of sediment despite stream bank stabilization.

Non chemical natural organic matter removal with a contact TiO2 process

Dissertação de Mestrado, Tecnologia dos Alimentos, Instituto Superior de Engenharia, Universidade do Algarve, 2014

Inhibition of proliferation, migration and invasion of human non-small cell lung cancer cell line A549 by phlomisoside F from Phlomis younghusbandii Mukerjee

Purpose: To determine the effect of phlomisoside F (PMF) on the proliferation, migration and invasion of human non-small cell lung cancer cell line A549 and explore the possible mechanisms. Methods: The anti-proliferative effect of PMF on A549 cells was determined by CCK-8. Subsequently, migration and invasion were evaluated by Transwell and Transwell with matrigel assays, respectively. Furthermore, cell cycle and apoptosis were assessed by flow cytometry, while the mechanisms of action were determined by Western blotting. Results: PMF exhibited significant anti-proliferative effect on A549 cells in concentration-dependent and time-dependent manners, with half maximal inhibitory concentration (IC50) of 54.51 μM. Treatment with PMF (10, 20 and 40 μM) for 48 h resulted in significantly decreased migration and invasion in A549 cells. In addition, PMF at concentrations of 25, 50 and 75 μM induced cell cycle arrest in G0/G1phase and enhanced cell apoptosis in A549 cells. Furthermore, caspase-3, caspase-9 and Bax protein expressions were up-regulated while Bacl-2 and COX-2 protein expressions were significantly downregulated at 10, 20 and 40 μM concentrations of PMF. Conclusion: PMF suppresses A549 cell growth, migration and invasion. The mechanism may be related to the induction of mitochondria-mediated apoptosis pathway via regulation of caspase-3, caspase-9, Bcl-2 and Bax expressions, and inhibition of PGE2 synthesis by reducing COX-2 expression.

Disorder driven transitions in non-equilibrium quantum systems

This thesis presents studies of the role of disorder in non-equilibrium quantum systems. The quantum states relevant to dynamics in these systems are very different from the ground state of the Hamiltonian. Two distinct systems are studied, (i) periodically driven Hamiltonians in two dimensions, and (ii) electrons in a one-dimensional lattice with power-law decaying hopping amplitudes. In the first system, the novel phases that are induced from the interplay of periodic driving, topology and disorder are studied. In the second system, the Anderson transition in all the eigenstates of the Hamiltonian are studied, as a function of the power-law exponent of the hopping amplitude.

In periodically driven systems the study focuses on the effect of disorder in the nature of the topology of the steady states. First, we investigate the robustness to disorder of Floquet topological insulators (FTIs) occurring in semiconductor quantum wells. Such FTIs are generated by resonantly driving a transition between the valence and conduction band. We show that when disorder is added, the topological nature of such FTIs persists as long as there is a gap at the resonant quasienergy. For strong enough disorder, this gap closes and all the states become localized as the system undergoes a transition to a trivial insulator.

Interestingly, the effects of disorder are not necessarily adverse, disorder can also induce a transition from a trivial to a topological system, thereby establishing a Floquet Topological Anderson Insulator (FTAI). Such a state would be a dynamical realization of the topological Anderson insulator. We identify the conditions on the driving field necessary for observing such a transition. We realize such a disorder induced topological Floquet spectrum in the driven honeycomb lattice and quantum well models.

Finally, we show that two-dimensional periodically driven quantum systems with spatial disorder admit a unique topological phase, which we call the anomalous Floquet-Anderson insulator (AFAI). The AFAI is characterized by a quasienergy spectrum featuring chiral edge modes coexisting with a fully localized bulk. Such a spectrum is impossible for a time-independent, local Hamiltonian. These unique characteristics of the AFAI give rise to a new topologically protected nonequilibrium transport phenomenon: quantized, yet nonadiabatic, charge pumping. We identify the topological invariants that distinguish the AFAI from a trivial, fully localized phase, and show that the two phases are separated by a phase transition.

The thesis also present the study of disordered systems using Wegner's Flow equations. The Flow Equation Method was proposed as a technique for studying excited states in an interacting system in one dimension. We apply this method to a one-dimensional tight binding problem with power-law decaying hoppings. This model presents a transition as a function of the exponent of the decay. It is shown that the the entire phase diagram, i.e. the delocalized, critical and localized phases in these systems can be studied using this technique. Based on this technique, we develop a strong-bond renormalization group that procedure where we solve the Flow Equations iteratively. This renormalization group approach provides a new framework to study the transition in this system.

Anomalies immunitaires chez les enfants exposés au VIH mais non infectés.

La thérapie antirétrovirale prévient la transmission mère-enfant du VIH dans plus de 98% des cas lorsqu’administrée pendant la grossesse, le travail et au nouveau-né. L’accessibilité à la thérapie antirétrovirale dans près de 70% des 1,5 millions cas de grossesses VIH+ dans le monde mène à la naissance de plus d’un million d’enfants exposés non infectés chaque année. Le nombre d’enfants exposés non infectés est à la hausse ainsi que les préoccupations concernant leur santé. En effet, plusieurs groupes ont signalé une augmentation de la morbidité et de la mortalité chez les enfants exposés non infectés. L’analyse des données rétrospectives de 705 enfants exposés non infectés de la cohorte mère-enfant du CMIS a révélé qu’à 2 mois d’âge, les enfants nés de mères ayant une charge virale supérieure à 1,000 copies d’ARN / ml avaient une fréquence de lymphocytes B significativement plus élevés par rapport aux enfants exposés non infectés nés de mères ayant une charge virale indétectable. L’objectif de cette étude est de caractériser ces anomalies. Les lymphocytes, provenant du sang de cordon ombilical et de sang veineux obtenu à 6 et 12 mois d’âge, ont été phénotypés par cytométrie en flux à l’aide des marqueurs CD3 / CD10 / CD14 / CD16 / CD19 / CD20 / CD21 / CD27 / IgM pour les lymphocytes B et CD4 / CD8 / CD3 / CCR7 / CD45RA pour les lymphocytes T. De plus, afin d’étudier les capacités fonctionnelles des lymphocytes B CD19+, la réponse antigène-spécifique au vaccin antitétanique a été mesurée par marquage avec des tétramères fluorescents de fragment C du toxoïde tétanique. Nos travaux ont mis en évidence des différences statistiquement significatives entre les enfants exposés non-infectés (ENI) nés de mères avec une charge virale détectable comparativement à ceux nés de mères avec une charge virale indétectable. À la naissance, les enfants ENI nés de mères avec une charge virale détectable avaient significativement moins de lymphocytes B totaux, plus de lymphocytes B mémoires classiques, activés, plasmablastes et lymphocytes T CD8+ mémoires centrales. À 6 mois, ils avaient significativement plus de lymphocytes B naïfs et significativement moins de lymphocytes T CD8+ effecteurs mémoires. À 12 mois d’âge, ils avaient significativement plus de lymphocytes B et T CD8+ totaux; significativement moins de lymphocytes T CD4+ totaux et leurs lymphocytes T affichaient un profil significativement plus activé (plus de cellules mémoires). L’analyse de la réponse antigène-spécifique a révélé une fréquence plus élevé de lymphocytes B mémoires IgM+ suggérant que les enfants nés de mères avec une virémie détectable ont plus de mal à établir une mémoire immunitaire efficace face au vaccin antitétanique. Nos données suggèrent qu’il y a exposition durant le premier trimestre de grossesse à la virémie maternelle et que cette exposition impacte le système immunitaire en développement du fœtus. Les mécanismes sous-jacents causant ces anomalies doivent encore être élucidés et l’épuisement du compartiment T à la naissance et à 6 mois reste à être investigué. Dans un pays industrialisé où l’accès aux soins est facilité, ces anomalies ont des conséquences modérées mais dans des pays à faible et moyen revenu, les conséquences peuvent être beaucoup plus tragiques voir fatales.

SIMULATIONS OF NEWTONIAN AND NON-NEWTONIAN FLOWS IN DEFORMABLE TUBES

Computational models for the investigation of flows in deformable tubes are developed and implemented in the open source computing environment OpenFOAM. Various simulations for Newtonian and non-Newtonian fluids under various flow conditions are carried out and analyzed. First, simulations are performed to investigate the flow of a shear-thinning, non-Newtonian fluid in a collapsed elastic tube and comparisons are made with experimental data. The fluid is modeled by means of the Bird-Carreau viscosity law. The computational domain of the deformed tube is constructed from data obtained via computer tomography imaging. Comparison of the computed velocity fields with the ultrasound Doppler velocity profile measurements show good agreement, as does the adjusted pressure drop along the tube's axis. Analysis of the shear rates show that the shear-thinning effect of the fluid becomes relevant in the cross-sections with the biggest deformation. The peristaltic motion is simulated by means of upper and lower rollers squeezing the fluid along a tube. Two frames of reference are considered. In the moving frame the computational domain is fixed and the coordinate system is moving with the roller speed, and in the fixed frame the roller is represented by a deforming mesh. Several two-dimensional simulations are carried out for Newtonian and non-Newtonian fluids. The effect of the shear-thinning behavior of the fluid on the transport efficiency is examined. In addition, the influence of the roller speed and the gap width between the rollers on the xxvii transport efficiency is discussed. Comparison with experimental data is also presented and different types of moving waves are implemented. In addition, the influence of the roller speed and the gap width between the rollers on the transport efficiency is discussed. Comparison with experimental data is also presented and different types of moving waves are implemented.

Development of an innovative non rule-based energy management strategy for a Hybrid Electric Vehicle, structured for predictive driving controls based on external information knowledge

Recently, the interest of the automotive market for hybrid vehicles has increased due to the more restrictive pollutants emissions legislation and to the necessity of decreasing the fossil fuel consumption, since such solution allows a consistent improvement of the vehicle global efficiency. The term hybridization regards the energy flow in the powertrain of a vehicle: a standard vehicle has, usually, only one energy source and one energy tank; instead, a hybrid vehicle has at least two energy sources. In most cases, the prime mover is an internal combustion engine (ICE) while the auxiliary energy source can be mechanical, electrical, pneumatic or hydraulic. It is expected from the control unit of a hybrid vehicle the use of the ICE in high efficiency working zones and to shut it down when it is more convenient, while using the EMG at partial loads and as a fast torque response during transients. However, the battery state of charge may represent a limitation for such a strategy. That’s the reason why, in most cases, energy management strategies are based on the State Of Charge, or SOC, control. Several studies have been conducted on this topic and many different approaches have been illustrated. The purpose of this dissertation is to develop an online (usable on-board) control strategy in which the operating modes are defined using an instantaneous optimization method that minimizes the equivalent fuel consumption of a hybrid electric vehicle. The equivalent fuel consumption is calculated by taking into account the total energy used by the hybrid powertrain during the propulsion phases. The first section presents the hybrid vehicles characteristics. The second chapter describes the global model, with a particular focus on the energy management strategies usable for the supervisory control of such a powertrain. The third chapter shows the performance of the implemented controller on a NEDC cycle compared with the one obtained with the original control strategy.

Design Optimization of Nozzle Shapes for Maximum Uniformity of Exit Flow

The objective of this study is to identify the optimal designs of converging-diverging supersonic and hypersonic nozzles that perform at maximum uniformity of thermodynamic and flow-field properties with respect to their average values at the nozzle exit. Since this is a multi-objective design optimization problem, the design variables used are parameters defining the shape of the nozzle. This work presents how variation of such parameters can influence the nozzle exit flow non-uniformities. A Computational Fluid Dynamics (CFD) software package, ANSYS FLUENT, was used to simulate the compressible, viscous gas flow-field in forty nozzle shapes, including the heat transfer analysis. The results of two turbulence models, k-e and k-ω, were computed and compared. With the analysis results obtained, the Response Surface Methodology (RSM) was applied for the purpose of performing a multi-objective optimization. The optimization was performed with ModeFrontier software package using Kriging and Radial Basis Functions (RBF) response surfaces. Final Pareto optimal nozzle shapes were then analyzed with ANSYS FLUENT to confirm the accuracy of the optimization process.

The Development of Calibrants through Characterization of Volatile Organic Compounds from Peroxide Based Explosives and a Non-target Chemical Calibration Compound

Detection canines represent the fastest and most versatile means of illicit material detection. This research endeavor in its most simplistic form is the improvement of detection canines through training, training aids, and calibration. This study focuses on developing a universal calibration compound for which all detection canines, regardless of detection substance, can be tested daily to ensure that they are working with acceptable parameters. Surrogate continuation aids (SCAs) were developed for peroxide based explosives along with the validation of the SCAs already developed within the International Forensic Research Institute (IFRI) prototype surrogate explosives kit. Storage parameters of the SCAs were evaluated to give recommendations to the detection canine community on the best possible training aid storage solution that minimizes the likelihood of contamination. Two commonly used and accepted detection canine imprinting methods were also evaluated for the speed in which the canine is trained and their reliability. As a result of the completion of this study, SCAs have been developed for explosive detection canine use covering: peroxide based explosives, TNT based explosives, nitroglycerin based explosives, tagged explosives, plasticized explosives, and smokeless powders. Through the use of these surrogate continuation aids a more uniform and reliable system of training can be implemented in the field than is currently used today. By examining the storage parameters of the SCAs, an ideal storage system has been developed using three levels of containment for the reduction of possible contamination. The developed calibration compound will ease the growing concerns over the legality and reliability of detection canine use by detailing the daily working parameters of the canine, allowing for Daubert rules of evidence admissibility to be applied. Through canine field testing, it has been shown that the IFRI SCAs outperform other commercially available training aids on the market. Additionally, of the imprinting methods tested, no difference was found in the speed in which the canines are trained or their reliability to detect illicit materials. Therefore, if the recommendations discovered in this study are followed, the detection canine community will greatly benefit through the use of scientifically validated training techniques and training aids.

Anomalies immunitaires chez les enfants exposés au VIH mais non infectés

La thérapie antirétrovirale prévient la transmission mère-enfant du VIH dans plus de 98% des cas lorsqu’administrée pendant la grossesse, le travail et au nouveau-né. L’accessibilité à la thérapie antirétrovirale dans près de 70% des 1,5 millions cas de grossesses VIH+ dans le monde mène à la naissance de plus d’un million d’enfants exposés non infectés chaque année. Le nombre d’enfants exposés non infectés est à la hausse ainsi que les préoccupations concernant leur santé. En effet, plusieurs groupes ont signalé une augmentation de la morbidité et de la mortalité chez les enfants exposés non infectés. L’analyse des données rétrospectives de 705 enfants exposés non infectés de la cohorte mère-enfant du CMIS a révélé qu’à 2 mois d’âge, les enfants nés de mères ayant une charge virale supérieure à 1,000 copies d’ARN / ml avaient une fréquence de lymphocytes B significativement plus élevés par rapport aux enfants exposés non infectés nés de mères ayant une charge virale indétectable. L’objectif de cette étude est de caractériser ces anomalies. Les lymphocytes, provenant du sang de cordon ombilical et de sang veineux obtenu à 6 et 12 mois d’âge, ont été phénotypés par cytométrie en flux à l’aide des marqueurs CD3 / CD10 / CD14 / CD16 / CD19 / CD20 / CD21 / CD27 / IgM pour les lymphocytes B et CD4 / CD8 / CD3 / CCR7 / CD45RA pour les lymphocytes T. De plus, afin d’étudier les capacités fonctionnelles des lymphocytes B CD19+, la réponse antigène-spécifique au vaccin antitétanique a été mesurée par marquage avec des tétramères fluorescents de fragment C du toxoïde tétanique. Nos travaux ont mis en évidence des différences statistiquement significatives entre les enfants exposés non-infectés (ENI) nés de mères avec une charge virale détectable comparativement à ceux nés de mères avec une charge virale indétectable. À la naissance, les enfants ENI nés de mères avec une charge virale détectable avaient significativement moins de lymphocytes B totaux, plus de lymphocytes B mémoires classiques, activés, plasmablastes et lymphocytes T CD8+ mémoires centrales. À 6 mois, ils avaient significativement plus de lymphocytes B naïfs et significativement moins de lymphocytes T CD8+ effecteurs mémoires. À 12 mois d’âge, ils avaient significativement plus de lymphocytes B et T CD8+ totaux; significativement moins de lymphocytes T CD4+ totaux et leurs lymphocytes T affichaient un profil significativement plus activé (plus de cellules mémoires). L’analyse de la réponse antigène-spécifique a révélé une fréquence plus élevé de lymphocytes B mémoires IgM+ suggérant que les enfants nés de mères avec une virémie détectable ont plus de mal à établir une mémoire immunitaire efficace face au vaccin antitétanique. Nos données suggèrent qu’il y a exposition durant le premier trimestre de grossesse à la virémie maternelle et que cette exposition impacte le système immunitaire en développement du fœtus. Les mécanismes sous-jacents causant ces anomalies doivent encore être élucidés et l’épuisement du compartiment T à la naissance et à 6 mois reste à être investigué. Dans un pays industrialisé où l’accès aux soins est facilité, ces anomalies ont des conséquences modérées mais dans des pays à faible et moyen revenu, les conséquences peuvent être beaucoup plus tragiques voir fatales.

Numerical simulation of fresh SCC flow in wall and beam elements using flow dynamics models

Abstract : Recently, there is a great interest to study the flow characteristics of suspensions in different environmental and industrial applications, such as snow avalanches, debris flows, hydrotransport systems, and material casting processes. Regarding rheological aspects, the majority of these suspensions, such as fresh concrete, behave mostly as non-Newtonian fluids. Concrete is the most widely used construction material in the world. Due to the limitations that exist in terms of workability and formwork filling abilities of normal concrete, a new class of concrete that is able to flow under its own weight, especially through narrow gaps in the congested areas of the formwork was developed. Accordingly, self-consolidating concrete (SCC) is a novel construction material that is gaining market acceptance in various applications. Higher fluidity characteristics of SCC enable it to be used in a number of special applications, such as densely reinforced sections. However, higher flowability of SCC makes it more sensitive to segregation of coarse particles during flow (i.e., dynamic segregation) and thereafter at rest (i.e., static segregation). Dynamic segregation can increase when SCC flows over a long distance or in the presence of obstacles. Therefore, there is always a need to establish a trade-off between the flowability, passing ability, and stability properties of SCC suspensions. This should be taken into consideration to design the casting process and the mixture proportioning of SCC. This is called “workability design” of SCC. An efficient and non-expensive workability design approach consists of the prediction and optimization of the workability of the concrete mixtures for the selected construction processes, such as transportation, pumping, casting, compaction, and finishing. Indeed, the mixture proportioning of SCC should ensure the construction quality demands, such as demanded levels of flowability, passing ability, filling ability, and stability (dynamic and static). This is necessary to develop some theoretical tools to assess under what conditions the construction quality demands are satisfied. Accordingly, this thesis is dedicated to carry out analytical and numerical simulations to predict flow performance of SCC under different casting processes, such as pumping and tremie applications, or casting using buckets. The L-Box and T-Box set-ups can evaluate flow performance properties of SCC (e.g., flowability, passing ability, filling ability, shear-induced and gravitational dynamic segregation) in casting process of wall and beam elements. The specific objective of the study consists of relating numerical results of flow simulation of SCC in L-Box and T-Box test set-ups, reported in this thesis, to the flow performance properties of SCC during casting. Accordingly, the SCC is modeled as a heterogeneous material. Furthermore, an analytical model is proposed to predict flow performance of SCC in L-Box set-up using the Dam Break Theory. On the other hand, results of the numerical simulation of SCC casting in a reinforced beam are verified by experimental free surface profiles. The results of numerical simulations of SCC casting (modeled as a single homogeneous fluid), are used to determine the critical zones corresponding to the higher risks of segregation and blocking. The effects of rheological parameters, density, particle contents, distribution of reinforcing bars, and particle-bar interactions on flow performance of SCC are evaluated using CFD simulations of SCC flow in L-Box and T-box test set-ups (modeled as a heterogeneous material). Two new approaches are proposed to classify the SCC mixtures based on filling ability and performability properties, as a contribution of flowability, passing ability, and dynamic stability of SCC.

Effects of flow regulation in the life-cycles of a mediterranean cyprinid species, the Iberian chub (Squalius carolitertii Doadrio, 1987)

Streamflow is considered a driver of inter and intra‐specific life‐history differences among freshwater fish. Therefore, dams and related flow regulation, can have deleterious impacts on their life‐cycles. The main objective of this study is to assess the effects of flow regulation on the growth and reproduction of a non‐migratory fish species. During one year, samples were collected from two populations of Iberian chub, inhabiting rivers with non‐regulated and regulated flow regimes. Flow regulation for water derivation promoted changes in chub’s condition, duration of gonad maturation and spawning, fecundity and oocyte size. However, this non‐migratory species was less responsive to streamflow regulation than a migratory species analysed. Findings from this study are important to understand changes imposed by regulated rivers on fish and can be used as guidelines for flow requirements implementations; RESUMO: O caudal é um dos fatores responsáveis pelo funcionamento dos ciclos de vida das espécies piscícolas dulciaquícolas. As barragens, e a regularização de caudal associada, podem ter impactes nos ciclos de vida destas espécies. O objetivo deste estudo prende‐se com a avaliação dos efeitos da regularização de caudal no crescimento e reprodução de uma espécie piscícola não‐migradora. A análise de amostras recolhidas em populações de escalo do Norte provenientes de dois rios de caudal regularizado e não regularizado, identificaram impactes significativos a nível da condição corporal, da maturação das gónadas e desova, da fecundidade e da dimensão dos oócitos. Esta espécie não‐migradora parece ser menos responsiva à artificialização do caudal que uma espécie migradora previamente analisada. Estes resultados permitem compreender as alterações impostas pela regularização do caudal e podem ser usados em programas de reabilitação fluvial.