Identificação de causas especiais no processo que aumentam a ocorrência de poro na solda de tubos de aço: aplicação etapas definir, medir e analisar do DMAIC

This work covers the methodology Six Sigma with the application of the steps Define, Measure and Analyze a company of steel tubes, with the objective of identify special causes in the process that drives the creation of the pore defect in the solder. It is highlighted the fact that this work is the base of an continuous upgrade project that aims in eliminating the occurrence of this defect. The motivation is given to the necessity of improving the productivity of the factory, considering that the defect occurs at random and your causes are unknown. This way, it was defined that the problem to analyze, measured the capability of the process in DPMO and analyzed with the aid of graph by attribute P. The results show the process that present special cases, as well as the process considered ideal, This way it was stated that in this work, the processes destabilized and the controlled, allowing a comparison of the characteristics for the elaboration of concise action plans to eliminate the defect. The project must follow the steps Upgrade and control the methodology Six Sigma, in order to ensure success in his execution, aiming to amplify the competitive edge of the business

Otimização de procedimentos de controle de qualidade em equipamentos radiográficos convencionais do Instituto de Eletrotécnica e Energia - USP

Radiography is currently an important method of diagnosis, both medical, dental and veterinary. The image in this type of survey is obtained using an X-ray beam, where the radiologist can possibly view structures of interest. It isn't always possible to get the desired images due to various factors, such as equipment limitations. The Administrative Law 453/98, the State Resolution SS 625/94, and other standards require testing and quality control acceptance limits that guarantee a good performance of the equipment for the security and quality of care, giving service users greater effectiveness in exams. This study were performed in the accompaniment of testing procedures for quality control established by Administrative Law 453/98 in several X-ray equipment to make a comparison and optimization in the descriptions of the procedures used by the Institute for Electrical Energy and the University of São Paulo (IEE / USP / SP).The optimization of the procedures were performed with the aid of a current literature, the Resolution 453/98, State Resolution SS 625/94 and other international standards. On this basis it was possible to observe the importance of regular monitoring of tests for an update, following the technological development of instruments used in the service

Testes de Controle de Qualidade em Sistema de Processamento Computadorizado FUJI

Computed Radiography (CR) is a term used to describe the system that electronically records a radiographic image. CR systems use receivers or IP (imaging plate) to capture the analog signals and then allow the readers to do the image processing and converted into digital information. With the increasing expansion of the CR for medical diagnostics it is necessary that these systems receive the same type of monitoring related to Quality Control and Acceptance to the conventional processing systems. The current legislation fails to specify the parameters and procedures to be tested, allowing that somehow, some equipment is not fully able to use in clinical routine. In this project we used the standard AAPM Report Number 93, which is already fully established outside the country and displays all test parameters in CR. From there were chosen three types of tests that were performed in a satisfactory sampling of IP´s. With this procedure it was possible to establish which of those IP's should be out of use, which reveals the important purpose of the study, demonstrating the need for Quality Control Testing and Acceptance in Computerized Radiography as soon as possible are included in the legislation regulator in the country

Procedimentos para análise de lucratividade de produtos no setor de autopeças metálicas

In a globalized world, organizations face an increasingly dynamic, innovative and competitive environment, so that this condition requires continuous adaptation to market developments. Intense competition requires organizations to further improve their performance, making productive efficiency a key factor for survival. A methodology that has added value to the product through a reconfiguration of the production method is the implementation of a management philosophy called Lean Six Sigma. The main objective of this work is, in the light of the Lean Six Sigma philosophy, intervene in a critical-collaborative way to develop procedures for analyzing the profitability of products in a company specializing in steel processing. To achieve this goal, were applied the method of action-research to intervene in a group of professionals for the study of the profitability of products in a auto parts industry. The interaction of practical and theoretical knowledge provided by the action-research allowed the business program was enhanced. The procedures proposed in this study were able to identify the current profitability of the product, the main causes of inefficiency and productive for solutions to reduce production inefficiencies, when the productive systems planned and actual production system were compared. The results indicate that current profitability of -3%, while the parameter provided during budget was 10%. Thus, it is concluded that the low profitability of the products may compromise the company's financial results and affect their competitiveness in the market. To address this problem, the Lean Six Sigma presents itself as a versatile and high applicability philosophy, providing relevant results for characterization and troubleshooting. It was also observed that the evidence presented in this paper can be adapted to other companies in the metal auto parts segment to identify and recover the profitability of products

Aplicações práticas de proteção radiológica nas áreas de medicina nuclear e radiodiagnóstico em instalações hospitalares

After the discovery of ionizing radiation, its applications in various fields of science began to take significant proportions. In the case of medicine, there are the application areas in radiotherapy, diagnostic radiology and nuclear medicine. It was then necessary to create the field of radiological protection to establish the conditions necessary for the safe use of such ionizing radiation. Apply knowledge obtained during the graduation stage and in the practice of radiological protection in the areas of nuclear medicine and diagnostic radiology. In the area of nuclear medicine, tests were made in the Geiger-Muller counters (GM) and the dose calibrator (curiometer), the monitoring tests of radiation, waste management, clean of the Therapeutic room and testing the quality control of gamma-chambers. In the area of radiology, were performed tests of quality control equipment for conventional X-ray equipment and x-ray fluoroscopy, all following the rules of the National Health Surveillance Agency (ANVISA), and reporting of tests. The routine developed in the fields of nuclear medicine in hospitals has proved very useful, since the quality control of GM counters contribute to the values of possible contamination are more reliable. The control of dose calibrator enables the patient not to receive different doses of the recommended amounts, which prevents the repetition of tests and unnecessary exposure to radiation. The management of waste following the rules and laws established and required for its management. Tests for quality control of gamma chambers help to evaluate its medical performance through image. In part of diagnostic radiology, tests for quality control are performed in order to verify that the equipment is acceptable for usage or if repairs are needed. The knowledge acquired at the internship consolidated the learning of graduation course

Ferramentas da qualidade na colheita mecanizada de cana-de-açúcar

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Pimenta pseudocaryophyllus (Gomes) L. R. Landrum (Myrtaceae): stem and leaf anatomy of a medicinal plant

Conselho Nacional de Desenvolvimento Científico e Tecnológico(CNPq)

Aplicação mecanizada de N-P-K individualizada na cultura da cana-de-açúcar

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Photostimulation of japanese quail

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Determination of quality parameters for mustard sauces in sealed packets using time-domain nuclear magnetic resonance spectroscopy and chemometrics

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Genomic analysis for managing small and endangered populations: a case study in Tyrol Grey cattle

Analysis of genomic data is increasingly becoming part of the livestock industry. Therefore, the routine collection of genomic information would be an invaluable resource for effective management of breeding programs in small, endangered populations. The objective of the paper was to demonstrate how genomic data could be used to analyse (1) linkage disequlibrium (LD), LD decay and the effective population size (NeLD); (2) Inbreeding level and effective population size (NeROH) based on runs of homozygosity (ROH); (3) Prediction of genomic breeding values (GEBV) using small within-breed and genomic information from other breeds. The Tyrol Grey population was used as an example, with the goal to highlight the potential of genomic analyses for small breeds. In addition to our own results we discuss additional use of genomics to assess relatedness, admixture proportions, and inheritance of harmful variants. The example data set consisted of 218 Tyrol Grey bull genotypes, which were all available AI bulls in the population. After standard quality control restrictions 34,581 SNPs remained for the analysis. A separate quality control was applied to determine ROH levels based on Illumina GenCall and Illumina GenTrain scores, resulting into 211 bulls and 33,604 SNPs. LD was computed as the squared correlation coefficient between SNPs within a 10 mega base pair (Mb) region. ROHs were derived based on regions covering at least 4, 8, and 16 Mb, suggesting that animals had common ancestors approximately 12, 6, and 3 generations ago, respectively. The corresponding mean inbreeding coefficients (F ROH) were 4.0% for 4 Mb, 2.9% for 8 Mb and 1.6% for 16 Mb runs. With an average generation interval of 5.66 years, estimated NeROH was 125 (NeROH>16 Mb), 186 (NeROH>8 Mb) and 370 (NeROH>4 Mb) indicating strict avoidance of close inbreeding in the population. The LD was used as an alternative method to infer the population history and the Ne. The results show a continuous decrease in NeLD, to 780, 120, and 80 for 100, 10, and 5 generations ago, respectively. Genomic selection was developed for and is working well in large breeds. The same methodology was applied in Tyrol Grey cattle, using different reference populations. Contrary to the expectations, the accuracy of GEBVs with very small within breed reference populations were very high, between 0.13-0.91 and 0.12-0.63, when estimated breeding values and deregressed breeding values were used as pseudo-phenotypes, respectively. Subsequent analyses confirmed the high accuracies being a consequence of low reliabilities of pseudo-phenotypes in the validation set, thus being heavily influenced by parent averages. Multi-breed and across breed reference sets gave inconsistent and lower accuracies. Genomic information may have a crucial role in management of small breeds, even if its primary usage differs from that of large breeds. It allows to assess relatedness between individuals, trends in inbreeding and to take decisions accordingly. These decisions would be based on the real genome architecture, rather than conventional pedigree information, which can be missing or incomplete. We strongly suggest the routine genotyping of all individuals that belong to a small breed in order to facilitate the effective management of endangered livestock populations.

Assessment of the quality evaluation of compounded fluconazole capsules marketed in the region of Araraquara (SP, Brazil)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Stability study of fluconazole applying validated bioassay and stability-indicating LC methods

Chemical degradation of drugs may result in altered therapeutic efficacy and even toxic effects. Therefore, understanding the factors that change the stability of pharmaceuticals and identifying ways to guarantee their stability are important. In this work stability-indicating Liquid Chromatographic (LC) and bioassay methods were validated and employed in the fluconazole stability studies. The correlation of sample results from both methods was evaluated. Fluconazole raw material stability was investigated in aqueous, acid (0.1 M HCl), alkaline (0.1 M NaOH) and oxidative (3% v/v H2O2) reflux for 6 hours, by LC method. Fluconazole capsules were exposed to UVC (254 nm, 66 and 180 days), climatic chamber (40°C, 75% RH, 90 days) and oven (60°C, 60 days), these samples were analyzed by LC and bioassay methods It was found that the drug is degraded (10% decrease) with arising of a possible degradation product in an oxidative medium and UVC exposure, in all the others conditions fluconazole remained chemically stable (higher than 98%) when analyzed by LC. However when the capsules stressed samples were evaluated through bioassay very low antifungal activity was found (about 30%). Fluconazole showed to be an unstable drug and it indicates that special care must be taken during the handling, storage and quality control using appropriated methods to analyze this therapeutic agent. This work suggests monitoring the fluconazole stability by bioassay and the stability-indicating LC methods.

Estudo comparativo de cápsulas contendo amoxicilina obtidas de algumas farmácias magistrais

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Neural models for predicting hole diameters in drilling processes

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)