The Role of Magnesium in Concrete Deterioration, HR-355, 1994

Concretes with service lives of less than 15 years and those with lives greater than 40 years were studied with petrographic microscope, scanning electron microscope, and electron microprobe to determine why these two groups of concrete exhibit such different degrees of durability under highway conditions. Coarse aggregate used in both types of concrete were from dolomite rock, but investigation revealed that dolomite aggregate in the two groups of concretes were much different in several respects. The poorly-performing aggregate is fine-grained, has numerous euhedral and subhedral dolomite rhombohedra, and has relatively high porosity. Aggregate from durable concrete is coarse-grained, with tightly interlocked crystal fabric, anhedral dolomite boundaries, and low porosity. Aggregate in short service life concrete was found to have undergone pervasive chemical reactions with the cement which produced reaction rims on the boundaries of coarse aggregate particles and in the cement region adjacent to aggregate boundaries. Textural and porosity differences are believed to be chiefly responsible for different service lives of the two groups of concrete. The basic reaction that has occurred in the short service life concretes between coarse aggregate and cement is an alkali-dolomite reaction. In the reaction dolomite from the aggregate reacts with hydroxide ions from the cement to free magnesium ions and carbonate ions, and the magnesium ions precipitate as brucite, Mg(OH)2. Simultaneously with this reaction, a second reaction occurs in which product carbonate ions react with portlandite from the cement to form calcite and hydroxide ions. Crystal growth pressures of newly formed brucite and calcite together with other processes, e.g. hydration state changes of magnesium chloride hydrates, lead to expansion of the concretes with resultant rapid deterioration. According to this model, magnesium from any source, either from reacting dolomite or from magnesium road deicers, has a major role in highway concrete deterioration. Consequently, magnesium deicers should be used with caution, and long-term testing of the effects of magnesium deicers on highway concrete should be implemented to determine their effects on durability.

Differentiated chemical reactivity of nanoparticles toward DTT

RATIONALE: Induction of oxidative stress and impairment of the antioxidant defense are considered important biological responses following nanoparticle (NP) exposure. The acellular in vitro dithiothreitol (DTT) assay is proposed to measure the oxidative potential of NP. In addition, DTT can be considered as a model compound of sulfur containing antioxidants. The objective of this work is to evaluate the surface reactivity in solution of a NP panel toward DTT. METHOD: The NP panel was composed of four carbonaceous particles, six types of metal oxides and silver with primary size ranged from 7 to 300 nm. Suspensions were prepared in surfactant solution with 30 min sonication. DTT was used as reductant to evaluate the oxidative properties of the different NP. The determination of the NP ability to catalyze electron transfer from DTT to oxygen was carried out as described in Sauvain et al., Nanotoxicology, 2008, 2:3, 121−129. RESULTS: All the carbonaceous NP catalyzed the oxidation of DTT by oxygen following the mass based order: carbon black > diesel exhaust particle > nanotubes > fullerene. A contrasting reactivity was observed for the metallic NP. Except for nickel oxide and metallic silver, which reacted similarly to the carbonaceous NP, all other metal oxides hindered the oxidation of DTT by oxygen, with ZnO being the most effective one. CONCLUSIONS : DTT was stabilized against oxidation in the presence of metal oxide NP in the solution. This suggests that different chemical interactions take place compared with carbonaceous NP. To explain these differences, we hypothesize that DTT could form complexes with the metal oxide surface (or dissolved metal ions), rendering it less susceptible to oxidation. By analogy, such a process could be thought to apply in biological systems with sulfur−containing antioxidants, reducing their buffer capacity. Such NP could thus contribute to oxidative stress by an alternative mechanism.

Long-term and long range migration of radioisotopes in terrestrial systems : mechanisms of radioisotopes (Cs, Sr, Pu, Am) mobilization in soils

Summary Artificial radionuclides were released in the environment during the atmospheric nuclear weapon tests and after accidental events involving nuclear industries. As a primary receptor of the deposition, the soil is a very sensitive compartment and understanding the interaction and migration of radionuclides within soils allows the development of scenario for the contamination risk of the population and of the environment. Most available field studies on radionuclides in soils only concern one or two isotopes, mostly 137Cs, and few physico-chemical soil parameters. The purpose of this study was a broader understanding of the radioecology of an Alpine valley. In a first part, we aimed to describe the depth distribution of 137Cs, 90Sr, 239+240Pu, and 241Am within different alpine soils and to identify some stable elements as indicators for accumulating layers. In the central part of the study, the goal was to investigate the repartition of ^Sr and 239Pu between the truly dissolved fraction and the colloidal fraction of the soil solutions and to identify the nature of colloids involved in the adsorption of ^Sr and 239Pu. These results were integrated in an "advection- sorption" transport model seeking to explain the migration of 239Pu and 90Sr within the soils and to assess the importance of colloidal transport for these two isotopes. A further aspect studied was the role of the competition between the radioisotopes (137Cs and 90Sr) and their stable chemical analogues (K and Ca) with respect to plant uptake by different plant species. The results on the depth distribution within the soils showed that 137Cs was mostly retained in the topsoil, to the exception of an organic-rich soil (Histosol 2) receiving important surface runoff, where migration down to a depth of 30 cm was observed. 137Cs depth distribution within the soils was similar to unsupported 210Pb depth distribution. The plant uptake of 137Cs clearly depended on the concentration of exchangeable potassium in the soils. Moreover, we showed that the 137Cs uptake by certain species of the taxonomic orders Poales and Rosales was more sensitive to the increase in exchangeable Κ compared to other orders. Strontium-90 was much more mobile in the soils than 137Cs and depth migration and accumulation in specific AI- and Fe-rich layers were found down to 30 cm. Copper and Ni showed accumulations in these same layers, indicating their potential to be used as indicators for the migration of ^Sr within the soils. In addition, we observed a 90Sr activity peak in the topsoil that can be attributable to recycling of 90Sr by plant uptake. We demonstrated for the first time that a part of 90Sr (at least 40%) was associated with the colloids in organic-rich soil solutions. Therefore, we predict a significant effect of the colloidal migration of ^Sr in organic-rich soil solutions. The plant uptake results for 90Sr indicated a phylogenetic effect between Non-Eudicot and Eudicots: the order Poales concentrating much less 90Sr than Eudicots do. Moreover, we were able to demonstrate that the sensitivity of the 90Sr uptake by 5 different Alpine plant species to the amount of exchangeable Ca was species-independent. Plutonium and 241Am accumulated in the second layer of all soils and only a slight migration deeper than 20 cm was observed. Plutonium and 241Am showed a similar depth distribution in the soils. The model results suggested that the present day migration of 239Pu was very slow and that the uptake by plants was negligible. 239Pu activities between 0.01 to 0.08 mBq/L were measured in the bulk soil solutions. Migration of 239Pu with the soil solution is dominated by colloidal transport. We reported strong evidences that humic substances were responsible of the sorption of 239Pu to the colloidal fraction of the soil solutions. This was reflected by the strong correlation between 239Pu concentrations and the content of (colloidal) organic matter in the soil solution. Résumé Certains radioéléments artificiels ont été disséminés dans l'environnement suite aux essais atmosphériques de bombes nucléaires et suite à des accidents impliquant les industries nucléaires. En tant que récepteur primaire de la déposition, le sol est un compartiment sensible et des connaissances sur les interactions et la migration des radioéléments dans le sol permettent de développer des modèles pour estimer la contamination de la population et de l'environnement. Actuellement, la plupart des études de terrain sur ce sujet concernent uniquement un ou deux radioéléments, surtout le 137Cs et peu d'études intègrent les paramètres du sol pour expliquer la migration des radioéléments. Le but général de cette étude était une compréhension étendue de la radio-écologie d'une vallée alpine. Notre premier objectif était de décrire la distribution en profondeur de 137Cs, ^Sr, 239+240pu et 241Am dans différents sols alpins en relation avec des éléments stables du sol, dans le but d'identifier des éléments stables qui pourraient servir d'indicateurs pour des horizons accumulateurs. L'objectif de la deuxième partie, qui était la partie centrale de l'étude, était d'estimer le pourcentage d'activité sous forme colloïdale du 239Pu et du 90Sr dans les solutions des sols. De plus nous avons déterminé la nature des colloïdes impliqués dans la fixation du ^Sr et 239Pu. Nous avons ensuite intégré ces résultats dans un modèle de transport développé dans le but de décrire la migration du 239Pu et 90Sr dans le sol. Finalement, nous avons étudié l'absorption de 137Cs et 90Sr par les plantes en fonction de l'espèce et de la compétition avec leur élément analogue stable (K et Ca). Les résultats sur la migration en profondeur du 137Cs ont montré que ce radioélément était généralement retenu en surface, à l'exception d'un sol riche en matière organique dans lequel nous avons observé une nette migration en profondeur. Dans tous les sols, la distribution en profondeur du 137Cs était corrélée avec la distribution du 210Pb. L'absorption du 137Cs par les plantes, était dépendante de la concentration en Κ échangeable dans le sol, le potassium étant un compétiteur. De plus, nous avons observé que les espèces ne réagissaient pas de la même manière aux variations de la concentration de Κ échangeable. En effet, les espèces appartenant aux ordres des Poales et des Rosales étaient plus sensibles aux variations de potassium échangeable dans le sol. Dans tous les sols Le 90Sr était beaucoup plus mobile que le 137Cs. En effet, nous avons observé des accumulations de 90Sr dans des horizons riches en Fe et Al jusqu'à 30 cm de profondeur. De plus, le Cu et le Ni montraient des accumulations dans les mêmes horizons que le 90Sr, indiquant qu'il pourrait être possible d'utiliser ces deux éléments comme analogues pour la migration du 90Sr. D'après le modèle développé, le pic de 90Sr dans les premiers centimètres du sol peut être attribué à du recyclage par les plantes. Le 90Sr en solution était principalement sous forme dissoute dans des solutions de sols peu organique (entre 60 et 100% de 90Sr dissous). Par contre, dans des solutions organiques, un important pourcentage de 90Sr (plus de 40%) était associé aux colloïdes. La migration colloïdale du 90Sr peut donc être significative dans des solutions organiques. Comme pour le 137Cs, l'absorption du 90Sr par les plantes dépendait de la concentration de son analogue chimique dans la fraction échangeable du sol. Par contre, les espèces de plantes étudiées avaient la même sensibilité aux variations de la concentration du calcium échangeable. Le plutonium et l'américium étaient accumulés dans le deuxième horizon du sol et nous avons observé seulement une faible migration plus profondément que 20 cm. Selon le modèle, la migration actuelle du plutonium est très lente et l'absorption par les plantes semble négligeable. Nous avons mesuré entre 0.01 et 0.08 mBq/L de 239Pu dans les solutions de sol brutes. La migration du plutonium par la solution du sol est due principalement aux colloïdes, probablement de nature humique. Résumé grand public Dans les années 1950 à 1960, l'environnement a été contaminé par des éléments radioactifs (radioéléments) artificiels provenant des essais des armes atomiques et de l'industrie nucléaire. En effet, durant ces années, les premiers essais de bombes atomiques se faisaient dans l'atmosphère, libérant de grandes quantités d'éléments radioactifs. De plus certains accidents impliquant l'industrie nucléaire civile ont contribué à la dissémination d'éléments radioactifs dans l'environnement. Ce fut par exemple le cas de l'accident de la centrale atomique de Tchernobyl en 1986 qui a causé une importante contamination d'une grande partie de l'Europe par le 137Cs. Lorsqu'ils sont libérés dans l'atmosphère, les radioéléments sont dispersés et transportés par les courants atmosphériques, puis peuvent être déposés dans l'environnement, principalement par les précipitations. Une fois déposés sur le sol, les radioéléments vont interagir avec les composants du sol et migrer plus ou moins vite. La connaissance des interactions des éléments radioactifs avec le sol est donc importante pour prédire les risques de contamination de l'environnement et de l'homme. Le but général de ce travail était d'évaluer la migration de différents éléments radioactifs (césium-137, strontium-90, plutonium et américium-241) à travers le sol. Nous avons choisi un site d'étude en milieu alpin (Val Piora, Tessin, Suisse), contaminé en radioéléments principalement par les retombées de l'accident de Tchernobyl et des essais atmosphériques de bombes atomiques. Dans un premier temps, nous avons caractérisé la distribution en profondeur des éléments radioactifs dans le sol et l'avons comparée à divers éléments stables. Cette comparaison nous a permit de remarquer que le cuivre et le nickel s'accumulaient dans les mêmes horizons du sol que le strontium-90 et pourraient donc être utilisés comme analogue pour la migration du strontium-90 dans les sols. Dans la plupart des sols étudiés, la migration du césium-137, du plutonium et de l'américium-241 était lente et ces radioéléments étaient donc accumulés dans les premiers centimètres du sol. Par contre, le strontium-90 a migré beaucoup plus rapidement que les autres radioéléments si bien qu'on observe des accumulations de strontium-90 à plus de 30 cm de profondeur. Les radioéléments migrent dans la solution du sol soit sous forme dissoute, soit sous forme colloïdale, c'est-à-dire associés à des particules de diamètre < Ιμηι. Cette association avec des colloïdes permet à des radioéléments peu solubles, comme le plutonium, de migrer plus rapidement qu'attendu. Nous avons voulu savoir quelle était la part de strontium-90 et plutonium associés à des colloïdes dans la solution du sol. Les résultats ont montré que le plutonium en solution était principalement associé à des colloïdes de type organique. Quant au strontium-90, ce dernier était en partie associé à des colloïdes dans des solutions de sol riches en matière organique, par contre, il était principalement sous forme dissoute dans les solutions de sol peu organiques. L'absorption de radioéléments par les plantes représente une voie importante pour le transfert vers la chaîne alimentaire, par conséquent pour la contamination de l'homme. Nous avons donc étudié le transfert du césium-137 et du strontium-90 de plusieurs sols vers différentes espèces de plantes. Les résultats ont montré que l'absorption des radioéléments par les plantes était liée à la concentration de leur analogue chimique (calcium pour le strontium-90 et potassium pour le césium- 137) dans la fraction échangeable du sol. De plus certaines espèces de plantes accumulent significativement moins de strontium-90.

Evaluation of Carbide Waste Lime for Soil Stabilization, Progress Report, HR-111

A lime by-product from the manufacture of acetylene from calcium carbide will be commercially available in Iowa. Since the cost of carbide waste lime f.o.b. source is only about half that of ordinary commercial lime, this material was investigated for potential uses in soil stabilization. The by-product lime is calcium hydroxide in a water slurry with approximately 40% solid concentration. Its effectiveness at stabilizing soils was checked by comparing with commercial high-calcium and dolomitic monohydrate varieties of lime. This was done by soil strength and plasticity tests in addition to studies of the reaction products by X-ray diffraction and chemical methods.

Histopathological evaluation of root canal filling materials for primary teeth

This study aimed to assess the response of apical and periapical tissues of dogs¿ teeth after root canal filling with different materials. Forty roots from dogs¿ premolars were prepared biomechanically and assigned to 4 groups filled with: Group I: commercial calcium hydroxide and polyethylene glycol-based paste (Calen®) thickened with zinc oxide; Group II: paste composed of iodoform, Rifocort® and camphorated amonochlorophenol; Group III: zinc oxide-eugenol cement; Group IV: sterile saline. After 30 days, the samples were subjected to histological processing. The histopathological findings revealed that in Groups I and IV the apical and periapical regions exhibited normal appearance, with large number of fibers and cells and no resorption of mineralized tissues. In Group II, mild inflammatory infiltrate and mild edema were observed, with discrete fibrogenesis and bone resorption. Group III showed altered periapical region and thickened periodontal ligament with presence of inflammatory cells and edema. It may be concluded that the Calen paste thickened with zinc oxide yielded the best tissue response, being the most indicated material for root canal filling of primary teeth with pulp vitality.

Minimal analytical characterization of engineered nanomaterials needed for hazard assessment in biological matrices.

Abstract This paper presents the outcomes from a workshop of the European Network on the Health and Environmental Impact of Nanomaterials (NanoImpactNet). During the workshop, 45 experts in the field of safety assessment of engineered nanomaterials addressed the need to systematically study sets of engineered nanomaterials with specific metrics to generate a data set which would allow the establishment of dose-response relations. The group concluded that international cooperation and worldwide standardization of terminology, reference materials and protocols are needed to make progress in establishing lists of essential metrics. High quality data necessitates the development of harmonized study approaches and adequate reporting of data. Priority metrics can only be based on well-characterized dose-response relations derived from the systematic study of the bio-kinetics and bio-interactions of nanomaterials at both organism and (sub)-cellular levels. In addition, increased effort is needed to develop and validate analytical methods to determine these metrics in a complex matrix.

Microstructure and magnetic properties of Ni50 Mn37 Sn13 Heusler alloy ribbons

The Heusler alloy Ni50 Mn37 Sn13 was successfully produced as ribbon flakes of thickness around 7-10 μm melt spinning. Fracture cross section micrographs in the ribbon show the formation of a microcrystalline columnarlike microstructure, with their longer axes perpendicular to the ribbon plane. Phase transition temperatures of the martensite-austenite transformation were found to be MS =218 K, Mf =207 K, AS =224 K, and Af =232 K; the thermal hysteresis of the transformation is 15 K. Ferromagnetic L 21 bcc austenite phase shows a Curie point of 313 K, with cell parameter a=0.5971 (5) nm at 298 K, transforming into a modulated 7M orthorhombic martensite with a=0.6121 (7) nm, b=0.6058 (8) nm, and c=0.5660 (2) nm, at 150 K

Production of polyclonal antisera using recombinant coat proteins of Grapevine leafroll-associated virus 2 and Grapevine virus B

The objective of this work was to produce and characterize specific antisera against Brazilian isolates of Grapevine leafroll-associated virus 2 (GLRaV-2) and Grapevine virus B (GVB), developed from expressed coat proteins (CPs) in Escherichia coli, and to test their possible use for the detection of these two viruses in diseased grapevines. The coat protein (CP) genes were RT-PCR-amplified, cloned and sequenced. The CP genes were subsequently subcloned, and the recombinant plasmids were used to transform E. coli cells and express the coat proteins. The recombinant coat proteins were purified, and their identities were confirmed by SDS-PAGE and Western blot and used for rabbit immunizations. Antisera raised against these proteins were able to recognize the corresponding recombinant proteins in Western blots and to detect GLRaV-2 and GVB in infected grapevine tissues, by indirect ELISA, discriminating healthy and infected grapevines with absorbances (A405) of 0.08/1.15 and 0.12/1.30, respectively. Expressing CP genes can yield high amount of viral protein with high antigenicity, and GLRaV-2 and GVB antisera obtained in this study can allow reliable virus disease diagnosis.

Desempenho agronômico de videiras com e sem sintomas de viroses, e comparação molecular de isolados virais

Resumo: O objetivo deste trabalho foi avaliar os efeitos de viroses em videiras sintomáticas e assintomáticas sobre as variáveis agronômicas relacionadas ao vigor das plantas e à qualidade enológica da uva, e comparar os isolados virais obtidos nessas duas condições. Realizaram-se dois experimentos com quatro cultivares. Todas as plantas foram indexadas, por meio da reação em cadeia da polimerase via transcrição reversa (RT-PCR) em tempo real, quanto à provável ocorrência dos seguintes vírus: Grapevine virus A (GVA), Grapevine virus B (GVB), Grapevine virus D (GVD), Grapevine leafroll-associated virus (GLRaV-1 ao -4, GLRaV-4 estirpe 5), Grapevine rupestris stem pitting-associated virus (GRSPaV) e Grapevine fleck virus (GFkV). As variáveis avaliadas foram: número de gemas brotadas e não brotadas, número de ramos com ou sem cachos, número total de gemas, número de cachos, massa de cachos frescos, massa total de bagas, massa do engaço, número de bagas por cacho, massa média de baga, sólidos solúveis totais, acidez total titulável, pH, massa de ramos podados ou diâmetros do tronco do porta-enxerto e da copa. Os efeitos negativos foram mais pronunciados nas plantas com sintomas de viroses; no entanto, constatou-se frequentemente que plantas sem sintomas também estavam infectadas. A análise molecular de GRSPaV, GVA e GLRaV-2, isolados de plantas sintomáticas e assintomáticas, resultou em alta percentagem de identidade de nucleotídeos entre isolados homólogos.

Vaihtoehtoalkalit mekaanisen massan peroksidivalkaisussa

Tehokkain tapavalkaista mekaanisesti kuidutettua puumassaa on suorittaa se hapettavasti peroksidikemikaalilla vahvasti alkalisissa oloissa. Perinteisesti alkalisuus on aikaansaatu natriumhydroksidin ja -silikaatin avulla. Se kuitenkin liuottaa massasta merkittävästi ligniiniä, mikä huonontaa saantoa ja suurentaa valkaisun jätevesien orgaanisen hiilen määrää sekä kemiallista hapenkulutusta. Yhä kovenevien vaaleustavoitteiden ja tiukentuneen vedenkäytön seurauksena on syntynyt tarve etsiä parempia valkaisun alkaleja. Kirjallisuuden pohjalta valittiinkokeellisesti tutkittaviksi alkaleiksi magnesiumhydroksidi, magnesiumoksidi, kalsiumhydroksidi sekä kalsiumoksidi. Niiden toimivuutta hapettavan vetyperoksidivalkaisun alkaleina tutkittiin valkaisukokein natriumsilikaattilisäyksen kanssa sekä ilman. Näistä parhaiten toimivaksi osoittautui Mg(OH)2. Sen avulla suoritettiin jatkoksi laboratoriokoevalkaisuja korkeassa sakeudessa. Keski- ja korkeasakeusvalkaisukokeiden tulosten mukaan käytettäessä Mg(OH)2 -alkalia natriumydroksidin ja -silikaatin asemesta jää massan loppuvaaleus noin yhden ISO-prosentin verran heikommaksi. Tällöin valkaisusuodoksessa oli vain varsin vähäinen määrä massasta liuennutta orgaanista hiiliainesta, noin 45 % siitä, mitä natriumin yhdisteiden käyttö vertailukokeessa tuotti. Tulosta varmennettiin suorittamalla korkea-sakeusvalkaisukokeita hiokemassatehtaan olosuhteissa, massoilla ja kiertovesillä.Myös tehdaskokeiden mukaan valkaistun massan loppuvaaleus jää noin yhden ISO-prosentin alhaisemmaksi, mutta valkaisusuodoksen orgaanisen hiilen määrä (TOC) jääalle puoleen Na-kemikaalein suoritetusta vertailukokeesta.

Optimization of the procedure for removing iron deposits on ceramic filter media

In this thesis, cleaning of ceramic filter media was studied. Mechanisms of fouling and dissolution of iron compounds, as well as methods for cleaning ceramic membranes fouled by iron deposits were studied in the literature part. Cleaning agents and different methods were closer examined in the experimental part of the thesis. Pyrite is found in the geologic strata. It is oxidized to form ferrous ions Fe(II) and ferric ions Fe(III). Fe(III) is further oxidized in the hydrolysis to form ferric hydroxide. Hematite and goethite, for instance, are naturally occurring iron oxidesand hydroxides. In contact with filter media, they can cause severe fouling, which common cleaning techniques competent enough to remove. Mechanisms for the dissolution of iron oxides include the ligand-promoted pathway and the proton-promoted pathway. The dissolution can also be reductive or non-reductive. The most efficient mechanism is the ligand-promoted reductive mechanism that comprises two stages: the induction period and the autocatalytic dissolution.Reducing agents(such as hydroquinone and hydroxylamine hydrochloride), chelating agents (such as EDTA) and organic acids are used for the removal of iron compounds. Oxalic acid is the most effective known cleaning agent for iron deposits. Since formulations are often more effective than organic acids, reducing agents or chelating agents alone, the citrate¿bicarbonate¿dithionite system among others is well studied in the literature. The cleaning is also enhanced with ultrasound and backpulsing.In the experimental part, oxalic acid and nitric acid were studied alone andin combinations. Also citric acid and ascorbic acid among other chemicals were tested. Soaking experiments, experiments with ultrasound and experiments for alternative methods to apply the cleaning solution on the filter samples were carried out. Permeability and ISO Brightness measurements were performed to examine the influence of the cleaning methods on the samples. Inductively coupled plasma optical emission spectroscopy (ICP-OES) analysis of the solutions was carried out to determine the dissolved metals.

Cutting edge: alum adjuvant stimulates inflammatory dendritic cells through activation of the NALP3 inflammasome.

Adjuvants are vaccine additives that stimulate the immune system without having any specific antigenic effect of itself. In this study we show that alum adjuvant induces the release of IL-1beta from macrophages and dendritic cells and that this is abrogated in cells lacking various NALP3 inflammasome components. The NALP3 inflammasome is also required in vivo for the innate immune response to OVA in alum. The early production of IL-1beta and the influx of inflammatory cells into the peritoneal cavity is strongly reduced in NALP3-deficient mice. The activation of adaptive cellular immunity to OVA-alum is initiated by monocytic dendritic cell precursors that induce the expansion of Ag-specific T cells in a NALP3-dependent way. We propose that, in addition to TLR stimulators, agonists of the NALP3 inflammasome should also be considered as vaccine adjuvants.

'Herbal' but potentially hazardous: an analysis of the constituents and smoke emissions of tobacco-free waterpipe products and the air quality in the cafes where they are served

BACKGROUND: There are limited data on the composition and smoke emissions of 'herbal' shisha products and the air quality of establishments where they are smoked. METHODS: Three studies of 'herbal' shisha were conducted: (1) samples of 'herbal' shisha products were chemically analysed; (2) 'herbal' and tobacco shisha were burned in a waterpipe smoking machine and main and sidestream smoke analysed by standard methods and (3) the air quality of six waterpipe cafes was assessed by measurement of CO, particulate and nicotine vapour content. RESULTS: We found considerable variation in heavy metal content between the three products sampled, one being particularly high in lead, chromium, nickel and arsenic. A similar pattern emerged for polycyclic aromatic hydrocarbons. Smoke emission analyses indicated that toxic byproducts produced by the combustion of 'herbal' shisha were equivalent or greater than those produced by tobacco shisha. The results of our air quality assessment demonstrated that mean PM2.5 levels and CO content were significantly higher in waterpipe establishments compared to a casino where cigarette smoking was permitted. Nicotine vapour was detected in one of the waterpipe cafes. CONCLUSIONS: 'Herbal' shisha products tested contained toxic trace metals and PAHs levels equivalent to, or in excess of, that found in cigarettes. Their mainstream and sidestream smoke emissions contained carcinogens equivalent to, or in excess of, those of tobacco products. The content of the air in the waterpipe cafes tested was potentially hazardous. These data, in aggregate, suggest that smoking 'herbal' shisha may well be dangerous to health.

Wounding of Arabidopsis halleri leaves enhances cadmium accumulation that acts as a defense against herbivory.

Approximately 0.2 % of all angiosperms are classified as metal hyperaccumulators based on their extraordinarily high leaf metal contents, for example >1 % zinc, >0.1 % nickel or >0.01 % cadmium (Cd) in dry biomass. So far, metal hyperaccumulation has been considered to be a taxon-wide, constitutively expressed trait, the extent of which depends solely on available metal concentrations in the soil. Here we show that in the facultative metallophyte Arabidopsis halleri, both insect herbivory and mechanical wounding of leaves trigger an increase specifically in leaf Cd accumulation. Moreover, the Cd concentrations accumulated in leaves can serve as an elemental defense against herbivory by larvae of the Brassicaceae specialist small white (Pieris rapae), thus allowing the plant to take advantage of this non-essential trace element and toxin. Metal homeostasis genes are overrepresented in the systemic transcriptional response of roots to the wounding of leaves in A. halleri, supporting that leaf Cd accumulation is preceded by systemic signaling events. A similar, but quantitatively less pronounced transcriptional response was observed in A. thaliana, suggesting that the systemically regulated modulation of metal homeostasis in response to leaf wounding also occurs in non-hyperaccumulator plants. This is the first report of an environmental stimulus influencing metal hyperaccumulation.