Daylighting performance of subtropical multi-residential towers : simulations tools for design decisions

During an intensive design-led workshop multidisciplinary design teams examined options for a sustainable multi-residential tower on an inner urban site in Brisbane (Australia). The main aim was to demonstrate the key principles of daylight to every habitable room and cross-ventilation to every apartment in the subtropical climate while responding to acceptable yield and price points. The four conceptual design proposals demonstrated a wide range of outcomes, with buildings ranging from 15 to 30 storeys. Daylight Factor (DF), view to the outside, and the avoidance of direct sunlight were the only quantitative and qualitative performance metrics used to implement daylighting to the proposed buildings during the charrette. This paper further assesses the daylighting performance of the four conceptual designs by utilizing Climate-based daylight modeling (CBDM), specifically Daylight Autonomy (DA) and Useful Daylight Illuminance (UDI). Results show that UDI 100-2000lux calculations provide more useful information on the daylighting design than DF. The percentage of the space with a UDI <100-2000lux larger than 50% ranged from 77% to 86% of the time for active occupant behaviour (occupancy from 6am to 6pm). The paper also highlights the architectural features that mostly affect daylighting design in subtropical climates.

Characterisation of multi wall carbon nanotube–polymer composites for strain sensing applications

Carbon nanotubes (CNTs) have excellent electrical, mechanical and electromechanical properties. When CNTs are incorporated into polymers, electrically conductive composites with high electrical conductivity at very low CNT content (often below 1% wt CNT) result. Due to the change in electrical properties under mechanical load, carbon nanotube/polymer composites have attracted significant research interest especially due to their potential for application in in-situ monitoring of stress distribution and active control of strain sensing in composite structures or as strain sensors. To sucessfully develop novel devices for such applications, some of the major challenges that need to be overcome include; in-depth understanding of structure-electrical conductivity relationships, response of the composites under changing environmental conditions and piezoresistivity of different types of carbon nanotube/polymer sensing devices. In this thesis, direct current (DC) and alternating current (AC) conductivity of CNT-epoxy composites was investigated. Details of microstructure obtained by scanning electron microscopy were used to link observed electrical properties with structure using equivalent circuit modeling. The role of polymer coatings on macro and micro level electrical conductivity was investigated using atomic force microscopy. Thermal analysis and Raman spectroscopy were used to evaluate the heat flow and deformation of carbon nanotubes embedded in the epoxy, respectively, and related to temperature induced resistivity changes. A comparative assessment of piezoresistivity was conducted using randomly mixed carbon nanotube/epoxy composites, and new concept epoxy- and polyurethane-coated carbon nanotube films. The results indicate that equivalent circuit modelling is a reliable technique for estimating values of the resistance and capacitive components in linear, low aspect ratio-epoxy composites. Using this approach, the dominant role of tunneling resistance in determining the electrical conductivity was confirmed, a result further verified using conductive-atomic force microscopy analysis. Randomly mixed CNT-epoxy composites were found to be highly sensitive to mechanical strain and temperature variation compared to polymer-coated CNT films. In the vicinity of the glass transition temperature, the CNT-epoxy composites exhibited pronounced resistivity peaks. Thermal and Raman spectroscopy analyses indicated that this phenomenon can be attributed to physical aging of the epoxy matrix phase and structural rearrangement of the conductive network induced by matrix expansion. The resistivity of polymercoated CNT composites was mainly dominated by the intrinsic resistivity of CNTs and the CNT junctions, and their linear, weakly temperature sensitive response can be described by a modified Luttinger liquid model. Piezoresistivity of the polymer coated sensors was dominated by break up of the conducting carbon nanotube network and the consequent degradation of nanotube-nanotube contacts while that of the randomly mixed CNT-epoxy composites was determined by tunnelling resistance between neighbouring CNTs. This thesis has demonstrated that it is possible to use microstructure information to develop equivalent circuit models that are capable of representing the electrical conductivity of CNT/epoxy composites accurately. New designs of carbon nanotube based sensing devices, utilising carbon nanotube films as the key functional element, can be used to overcome the high temperature sensitivity of randomly mixed CNT/polymer composites without compromising on desired high strain sensitivity. This concept can be extended to develop large area intelligent CNT based coatings and targeted weak-point specific strain sensors for use in structural health monitoring.

Behavioural beliefs concerning gender and high-risk sexual behaviours in the context of HIV/AIDS in PNG : views from within teacher education

Education is often viewed as a key approach to address sexual-health issues; the current concern is the burgeoning HIV/AIDS epidemic. This ethnographic study investigates the gender practices associated with high-risk sexual behaviour in Papua New Guinea as viewed by educators there. A number of practices, including gender inequality and associated sexual behaviours have been highlighted by male and female participants as escalating PNG’s HIV/AIDS epidemic. The study finds that although participants were well-informed concerning HIV/AIDS, they had varying beliefs concerning the prevailing gender/sexual issues involved in escalating highrisk behaviour and how to address the problem. The study further examines the behavioural beliefs and intentions of the educators themselves. Subsequently, within the data a number of underpinning factors, pertaining to gender, education and life experience, were found to be related to the behaviour beliefs and intentions of participants towards embracing change with regard to behaviours associated with gender equality in PNG. These factors appeared to encourage participants to adopt healthier gender and sexual behavioural intentions and, arguably, could provide the basis for ways to help address the gender inequality and high-risk behaviours associated with HIV/AIDS in PNG.

Travel context : development of a model to measure destination brand performance across different travel situations

Purpose: There is a lack of theory relating to destination brand performance measurement in the destination branding literature, which emerged in the late 1990s (see for example Dosen, Vransevic, & Prebezac, 1998). Additionally, there is a lack of research about the importance of travel context in consumers’ destination decision making (Hu & Ritchie, 1993). This study develops a structural model to measure destination brand performance across different travel situations. The theory of planned behaviour (TpB) was utilised as a framework to underpin the consumer-based brand equity (CBBE) hierarchy to develop a model of destination brand performance. Research approach: A proposed model of destination brand performance was developed through a review of the literature. The first study was used to identify destination image attributes (the core construct) using an analysis of the literature, a document analysis, and personal interviews using the Repertory Test qualitative technique. Underpinned by Personal Construct Theory (PCT), the Repertory Test enables the elicitation of attributes consumers use to evaluate destinations when considering travel. Data was examined in the first study to i) identify any attribute differences in travel contexts and ii) create a scale for use in a questionnaire. A second study was conducted to test the proposed model using a questionnaire with eight groups of participants to assess four destinations across two travel contexts. The model was tested utilising structural equation modelling. Findings: The first study resulted in a list of 29 destination image attributes for use in a scale index. Attributes were assessed across travel contexts and few differences were identified. The second study assessed the congruence of destination brand identity (the destination marketing organisation’s desired image) and destination brand image (the actual perceptions held by consumers) using importance-performance analyses. Finally, the proposed model of destination brand performance was tested. Overall the data supported the model of destination brand performance across travel contexts and destinations. Additionally, this was compared to consumers’ decision sets, further supporting the model. Value: This research provides a contribution to the destination marketing literature through the development of a measurement of destination brand performance underpinned by TpB. Practically; it will provide destination marketing organisations with a tool to track destination brand performance, relative to key competing places, over time. This is important given the development of a destination brand is a long term endeavour.

Re-made in Asia : transformation across Asian markets and popular culture

The thesis is an examination of how Japanese popular culture products are remade (rimeiku). Adaptation of manga, anime and television drama, from one format to another, frequently occurs within Japan. The rights to these stories and texts are traded in South Korea and Taiwan. The ‘spin-off’ products form part of the Japanese content industry. When products are distributed and remade across geographical boundaries, they have a multi-dimensional aspect and potentially contribute to an evolving cultural re-engagement between Japan and East Asia. The case studies are the television dramas Akai Giwaku and Winter Sonata and two manga, Hana yori Dango and Janguru Taitei. Except for the television drama Winter Sonata these texts originated in Japan. Each study shows how remaking occurs across geographical borders. The study argues that Japan has been slow to recognise the value of its popular culture through regional and international media trade. Japan is now taking steps to remedy this strategic shortfall to enable the long-term viability of the Japanese content industry. The study includes an examination of how remaking raises legal issues in the appropriation of media content. Unauthorised copying and piracy contributes to loss of financial value. To place the three Japanese cultural products into a historical context, the thesis includes an overview of Japanese copying culture from its early origins through to the present day. The thesis also discusses the Meiji restoration and the post-World War II restructuring that resulted in Japan becoming a regional media powerhouse. The localisation of Japanese media content in South Korea and Taiwan also brings with it significant cultural influences, which may be regarded as contributing to a better understanding of East Asian society in line with the idea of regional ‘harmony’. The study argues that the commercial success of Japanese products beyond Japan is governed by perceptions of the quality of the story and by the cultural frames of the target audience. The thesis draws on audience research to illustrate the loss or reinforcement of national identity as a consequence of cross-cultural trade. The thesis also examines the contribution to Japanese ‘soft power’ (Nye, 2004, p. x). The study concludes with recommendations for the sustainability of the Japanese media industry.

Subcarrier pairing and relay assignment with improved user fairness in a multi-user cooperative OFDM system

We consider a joint relay selection and subcarrier allocation problem that minimizes the total system power for a multi-user, multi-relay and single source cooperative OFDM based two hop system. The system is constrained to all users having a specific subcarrier requirement (user fairness). However no specific fairness constraints for relays are considered. To ensure the optimum power allocation, the subcarriers in two hops are paired with each other. We obtain an optimal subcarrier allocation for the single user case using a similar method to what is described in [1] and modify the algorithm for multiuser scenario. Although the optimality is not achieved in multiuser case the probability of all users being served fairly is improved significantly with a relatively low cost trade off.

Maintenance optimisation of a multi-state series-parallel system considering economic dependence and state-dependent inspection intervals

This paper presents a maintenance optimisation method for a multi-state series-parallel system considering economic dependence and state-dependent inspection intervals. The objective function considered in the paper is the average revenue per unit time calculated based on the semi-regenerative theory and the universal generating function (UGF). A new algorithm using the stochastic ordering is also developed in this paper to reduce the search space of maintenance strategies and to enhance the efficiency of optimisation algorithms. A numerical simulation is presented in the study to evaluate the efficiency of the proposed maintenance strategy and optimisation algorithms. The simulation result reveals that maintenance strategies with opportunistic maintenance and state-dependent inspection intervals are more cost-effective when the influence of economic dependence and inspection cost is significant. The study further demonstrates that the optimisation algorithm proposed in this paper has higher computational efficiency than the commonly employed heuristic algorithms.

Development of a school connectedness component of an adolescent injury prevention program : lessons for implementation

The school environment plays an important role in shaping adolescent outcomes, and research increasingly demonstrates the need to target the school social context in health promotion programs. This paper describes the research process undertaken to design a school connectedness component of an injury prevention program for early adolescents, Skills for Preventing Injury in Youth (SPIY). The connectedness component takes the form of a professional development workshop for teachers on increasing students’ connectedness to school, and this paper describes the research process used to construct program material. It also describes the methods used to encourage teachers’ implementation of connectedness strategies following program delivery. A multi-stage process of data collection included, (i) surveys with 540 Grade 9 students to examine links between school connectedness and risk-related injury, (ii) a systematic literature review of previously-evaluated school connectedness programs to determine key strategies that encourage implementation fidelity and program effectiveness, and (iii) interviews with 14 high school teachers to understand current use of connectedness strategies and ideas for program design. Findings from each stage are discussed in terms of how results informed the program design. The survey data provided information from which to frame program content, and the results of the systematic review demonstrated effective program strategies. The teacher interview data also provided program content incorporating target participants’ views and aligning with their priorities, which is important to ensure effective implementation of program strategies. A comprehensive design process provides an understanding of methods for, and may encourage, teachers’ future implementation of program strategies.

Cross layer optimization of VANET routing with multi-objective decision making

Vehicular Ad-hoc Networks (VANET) have different characteristics compared to other mobile ad-hoc networks. The dynamic nature of the vehicles which act as routers and clients are connected with unreliable radio links and Routing becomes a complex problem. First we propose CO-GPSR (Cooperative GPSR), an extension of the traditional GPSR (Greedy Perimeter Stateless Routing) which uses relay nodes which exploit radio path diversity in a vehicular network to increase routing performance. Next we formulate a Multi-objective decision making problem to select optimum packet relaying nodes to increase the routing performance further. We use cross layer information for the optimization process. We evaluate the routing performance more comprehensively using realistic vehicular traces and a Nakagami fading propagation model optimized for highway scenarios in VANETs. Our results show that when Multi-objective decision making is used for cross layer optimization of routing a 70% performance increment can be obtained for low vehicle densities on average, which is a two fold increase compared to the single criteria maximization approach.

Extreme sports are good for your health : a phenomenological understanding of fear and anxiety in extreme sport

Extreme sports are traditionally explored from a risk-taking perspective which often assumes that participants do not experience fear. In this paper we explore participants’ experience of fear associated with participation in extreme sports. An interpretive phenomenological method was used with 15 participants. Four themes emerged: experience of fear, relationship to fear, management of fear, and fear and self transformation. Participant’s experience of extreme sports was revealed in terms of intense fear but this fear was integrated and experienced as a potentially meaningful and constructive event in their lives. The findings have implications for understanding fear as a potentially transformative process.

Informational constraints on the emergence of passing direction in the team sport of futsal

This study investigated compound spatial and temporal measures of interpersonal interactions purported to constrain the emergence of affordances for passing direction in the team sport of futsal. For this purpose, attacker–defender interactions in 37 sequences of play from a futsal competition in which 24 male professional players participated (M=30.04 years, SD=4.10) were filmed and analysed using TACTO software. Relative angle data were used as measures to study coordination tendencies that emerged between players during performance. Results showed that the direction for a pass emerged from relative angles between: (1) the vector from a ball carrier to ball receiver and the vector from the ball carrier to the nearest defender (70°) (p<0.01) and (2) the vector from a ball carrier to ball receiver and the vector from the ball carrier to a ball receiver's nearest defender (31°) (p < 0.01). Furthermore, passing direction was also constrained by temporal information from the emergence of both angles, since the pass was performed to attacker–defender dyads with the highest velocities of these angles (p < 0.05). Results suggested that decisions on selecting the direction of a pass in the team sport of futsal emerged at critical values of these key compound motion measures.

Network interactions and performance of a multi-function IEC 61850 process bus

New substation technology, such as non-conventional instrument transformers,and a need to reduce design and construction costs, are driving the adoption of Ethernet based digital process bus networks for high voltage substations. Protection and control applications can share a process bus, making more efficient use of the network infrastructure. This paper classifies and defines performance requirements for the protocols used in a process bus on the basis of application. These include GOOSE, SNMP and IEC 61850-9-2 sampled values. A method, based on the Multiple Spanning Tree Protocol (MSTP) and virtual local area networks, is presented that separates management and monitoring traffic from the rest of the process bus. A quantitative investigation of the interaction between various protocols used in a process bus is described. These tests also validate the effectiveness of the MSTP based traffic segregation method. While this paper focusses on a substation automation network, the results are applicable to other real-time industrial networks that implement multiple protocols. High volume sampled value data and time-critical circuit breaker tripping commands do not interact on a full duplex switched Ethernet network, even under very high network load conditions. This enables an efficient digital network to replace a large number of conventional analog connections between control rooms and high voltage switchyards.

Dynamic equivalent state estimation for multi-area power systems with synchronized phasor measurement units

This paper proposes a new approach for state estimation of angles and frequencies of equivalent areas in large power systems with synchronized phasor measurement units. Defining coherent generators and their correspondent areas, generators are aggregated and system reduction is performed in each area of inter-connected power systems. The structure of the reduced system is obtained based on the characteristics of the reduced linear model and measurement data to form the non-linear model of the reduced system. Then a Kalman estimator is designed for the reduced system to provide an equivalent dynamic system state estimation using the synchronized phasor measurement data. The method is simulated on two test systems to evaluate the feasibility of the proposed method.

Community wide interventions for increasing physical activity (protocol)

This is the protocol for a review and there is no abstract. The objectives are as follows: Primary research objective To determine the effects of community wide, multi-strategic interventions upon community levels of physical activity. Secondary research objectives 1. To explore whether any effects of the intervention are different within and between populations, and whether these differences form an equity gradient. 2. To describe other health (e.g. cardiovascular disease morbidity) and behavioural effects (e.g. diet) where appropriate outcomes are available. 3. To explore the influence of context in the design, delivery, and outcomes of the interventions. 4. To explore the relationship between the number of components, duration, and effects of the interventions. 5. To highlight implications for further research and research methods to improve knowledge of the interventions in relation to the primary research objective.