Simulations in 3D research : Can Unity3D be used to simulate a 3D display system?

Mid Sweden University is currently researching how to capture more of a scene with a camera and how to create 3D images that does not require extra equipment for the viewer. In the process of this research they have started looking into simulating some of the tests that they wish to conduct. The goal of this project is to research whether the 3D graphics engine Unity3D could be used to simulate these tests, and to what degree. To test this a simulation was designed and implemented. The simulation used a split display system where each camera is directly connected to a part of the screen and using the position of the viewer the correct part of the camera feed is shown. Some literary studies were also done into how current 3D technology works. The simulation was successfully implemented and shows that simple simulation can be done in Unity3D, however, some problems were encountered in the process. The conclusion of the project show that there is much work left before simulation is viable but that there is potential in the technology and that the research team should continue to investigate it.

Renar och vindkraft II : Vindkraft i drift och effekter på renar och renskötsel

Utbyggnaden av vindkraft inom renskötselområdet har ökat markant det senaste decenniet, trots att kunskapen om påverkan av vindkraftsetableringar ännu inte är fullt utredd och dokumenterad. I den här rapporten beskriver vi framförallt hur vindkraftparker i driftsfas påverkar renarna och renskötseln i tre olika områden. I Malå sameby har vi studerat kalvningsområdet kring Storliden och Jokkmokkslidens vindkraftparker. I Vilhelmina Norra sameby har vi studerat vinterbetesområdet kring Stor-Rotlidens vindkraftpark, samt Lögdeålandets betesområde med Gabrielsbergets vindkraftpark som används av Byrkije reinbetesdistrikt från Norge. För att få en helhetsbild av hur renarna använder sitt betesområde är det viktigt att studera renarnas betes- och förflyttningsmönster långsiktigt och över hela deras betesområde och inte bara inom det lokala området nära parken. Det är också viktigt att ta hänsyn till att renarnas betesutnyttjande skiftar från år till år och mellan olika årstider beroende på väderlek och andra yttre förutsättningar. Vi vill också understryka vikten av att kombinera den traditionella kunskapen från renskötarna med vedertagna vetenskapliga analysmetoder för att besvara de frågor som är viktiga för att kunna bedriva en hållbar renskötsel. Vi har undersökt renarnas användning av områdena genom att utföra spillningsinventeringar under åren 2009-2015 (endast i Malå sameby), och genom att följa renar utrustade med GPS-halsband under åren 2005-2015. Datat är insamlat före och under byggfas och under driftsfas (för Gabrielsberget finns GPS-data endast för driftsfasen). Vi har analyserat data genom att utveckla statistiska modeller för val av betesområde för varje område där vi har beräknat hur renarna förhåller sig till vindkraftparksområdet före, under och efter byggnation, och på Gabrielsberget när parken varit avstängd under 40 dagar och under drift vid olika renskötselsituationer. Genom intervjuer, möten och samtal, samt information från Gabrielsbergets vindkraftparks kontrollprogram, har vi tagit del av renskötarnas erfarenheter av hur renarnas beteende, och därmed även renskötseln, påverkats av vindkraftsutbyggnaden i respektive område. Våra resultat visar att renarna både på kalvnings- och på vinterbetesområden påverkas negativt av vindkraftsetableringarna (Tabell a). Renarna undviker att beta i områden där de kan se och/eller höra vindkraftsverken och föredrar att vistas i områden där vindkraftverken är skymda. I kalvningsområdet i Malå ökade användningen av skymda områden med 60 % under driftsfas. I vinterbetesområdet på Gabrielsberget, när renarna utfodrades i parken och kantbevakades intensivt för att stanna i parkområdet under driftsfas, ökade användningen av skymda områden med 13 % jämfört med när de inte var utfodrade och fick ströva mer fritt. Resultaten visar också att renarna minskar sin användning av området nära vindkraftparkerna. I kalvningslandet i Malå minskar renarna sin användning av områden inom 5 km från parkerna med 16-20 %. Vintertid vid Gabrielsbergets vindkraftpark undvek renarna parken med 3 km. Våra resultat visar även att renarnas betesro minskar inom en radie på 4 km från vindkraftparkerna under kalvningsperioden och tiden därefter i jämförelse med perioden före byggfas. Exakta avstånd som renarna påverkas beror på förutsättningarna i respektive område, exempelvis hur topografin ser ut eller om området är begränsat av stängsel eller annan infrastruktur. Förändringarna i habitatutnyttjande i våra studieområden blev tydligare när parkerna var centralt belägna i renarnas betesområde, som i kalvningsområdet i Malå eller i vinterbeteslandet på Gabrielsberget, medan det inte var lika tydliga effekter kring Stor-Rotlidens park, som ligger i utkanten av ett huvudbetesområde. Oftast är snöförhållandena bättre ur betessynpunkt högre upp i terrängen än nere i dalgångarna, på grund av stabilare temperatur, vind som blåser bort snötäcket och mer variation i topografin. Därför kan etablering av vindkraftparker i höglänta områden försämra möjligheten att använda sådana viktiga reservbetesområden under vintrar med i övrigt dåliga snöförhållanden, vilka blir allt vanligare i och med klimatförändringarna. Våra resultat tyder inte direkt på att renarna påverkats negativt under dåliga betesvintrar men fler år av studier behövs för att ytterligare klargöra hur vindkraft påverkar renarna under dessa vintrar. Våra studier har visat att etablering av vindkraft har konsekvenser för renskötseln under både barmarkssäsongen och under vintern, men effekterna förmodas få störst inverkan inom vinterbetesområdet där det är svårt att hitta alternativa betesområden för renarna. Under sommaren är betestillgången oftast mindre begränsad och renarna kan lättare hitta alternativa områden. En direkt konsekvens av Gabrielsbergets vindkraftpark som är placerad mitt i ett vinterbetesområde har blivit att renarna behöver tillskottsutfodras och bevakas intensivare för att de inte ska gå ut ur området. När den naturliga vandringen mellan olika betesområden störs för att renarna undviker att vistas i ett område kan det leda till att den totala tillgången till naturligt bete minskar och att man permanent måste tillskottsutfodra, alternativt minska antalet renar. Annan infrastruktur som vägar och kraftledningar påverkar också renarna. Vid Storliden och Jokkmokksliden och vid Stor-Rotliden där data samlats in innan vindkraftparken uppfördes visar våra resultat att renarna undviker de omkringliggande landsvägarna redan innan parkerna etablerades. Vid Stor-Rotliden ökar dock renarna användningen av områden nära vägarna efter att parken är byggd. På Gabrielsberget, där vi endast har data under drifttiden, är renarna närmare vägarna (även stora vägar som E4) när renskötarna minskar på kantbevakningen för att inte hålla renarna nära parken. Detta ökar naturligtvis risken för trafikolyckor och innebär att renskötarna måste bevaka dessa områden intensivare. Sist i rapporten presenterar vi förslag till åtgärder som kan användas för att underlätta arbetet för renskötseln om det är så att en vindkraftpark redan är byggd. Några exempel på åtgärder som är direkt kopplat till parken är att stänga av vägarna in i vindkraftparken för att förhindra nöjeskörning med skoter och bil under den tiden renarna vistas i området samt tät dialog mellan vindkraftsbolag och sameby angående vinterväghållningen av vägarna till och inom vindkraftparken. Andra mer regionala åtgärder för att förbättra förutsättningarna för renskötselarbetet på andra platser för samebyn, kan vara att sätta stängsel längst större vägar och järnvägar (t.ex. E4:an eller stambanan) i kombination med strategiskt utplacerade ekodukter. Detta för att underlätta och återställa möjligheterna till renarnas fria strövning och renskötarnas flytt av renar mellan olika betesområden.   

Development of a model to predict the life of pneumatic conveyor bends subject to erosive wear

The erosion processes resulting from flow of fluids (gas-solid or liquid-solid) are encountered in nature and many industrial processes. The common feature of these erosion processes is the interaction of the fluid (particle) with its boundary thus resulting in the loss of material from the surface. This type of erosion in detrimental to the equipment used in pneumatic conveying systems. The puncture of pneumatic conveyor bends in industry causes several problems. Some of which are: (1) Escape of the conveyed product causing health and dust hazard; (2) Repairing and cleaning up after punctures necessitates shutting down conveyors, which will affect the operation of the plant, thus reducing profitability. The most common occurrence of process failure in pneumatic conveying systems is when pipe sections at the bends wear away and puncture. The reason for this is particles of varying speed, shape, size and material properties strike the bend wall with greater intensity than in straight sections of the pipe. Currently available models for predicting the lifetime of bends are inaccurate (over predict by 80%. The provision of an accurate predictive method would lead to improvements in the structure of the planned maintenance programmes of processes, thus reducing unplanned shutdowns and ultimately the downtime costs associated with these unplanned shutdowns. This is the main motivation behind the current research. The paper reports on two aspects of the first phases of the study-undertaken for the current project. These are (1) Development and implementation; and (2) Testing of the modelling environment. The model framework encompasses Computational Fluid Dynamics (CFD) related engineering tools, based on Eulerian (gas) and Lagrangian (particle) approaches to represent the two distinct conveyed phases, to predict the lifetime of conveyor bends. The method attempts to account for the effect of erosion on the pipe wall via particle impacts, taking into account the angle of attack, impact velocity, shape/size and material properties of the wall and conveyed material, within a CFD framework. Only a handful of researchers use CFD as the basis of predicting the particle motion, see for example [1-4] . It is hoped that this would lead to more realistic predictions of the wear profile. Results, for two, three-dimensional test cases using the commercially available CFD PHOENICS are presented. These are reported in relation to the impact intensity and sensitivity to the inlet particle distributions.

The use of motivational interviews by nurses to promote health behaviors in adolescents: a scoping review protocol

Adolescents - defined as young people between 10 and 19 years of age1 - are, in general, a relatively healthy segment of the population.2 However, the developmental changes that take place during adolescence may affect their subsequent risk for diseases and for a variety of health-related behaviors. In fact, early onset of preventable health problems (e.g. obesity, malnutrition, STDs) and the engagement in health risk behaviors (e.g., sedentary life style, excessive alcohol consumption, unprotected sex) during adolescence, are likely to put them at greater risk for physical and mental health problems at a later stage in life. Moreover, health related problems and health risk behaviors may disrupt adolescents' physical and cognitive development and therefore may affect their ability to think and act in relation to decisions about their health in the future.1 In summary, health-related behaviors in adolescence, apart from their influence on the continuum of "health-disease", they also have the potential to influence future behaviors. In fact, several studies have shown that past behaviors are good predictors of future behaviors .3,4 Thus, promoting healthy practices during adolescence and taking measures to better protect young people from health risks are essential for the prevention of health problems in adulthood.5 According to the World Health Organization, the main problems affecting young people include mental health problems (such as behavioral disorders, eating disorders, suicide, anxiety or depression), the use of substances (illegal substances, alcohol and tobacco), interpersonal violence, nutrition (a proper nutrition consists of healthy eating habits and physical exercise), unintentional injuries (which are a leading cause of death and disability among young people, with road traffic injuries accounting for about 700 deaths per day), sexual and reproductive health (for example, risky sexual behaviors, early pregnancy and childbirth) and HIV (resulting from sexual transmission and drug injection).5,6 On the other hand, the number of children and youth with chronic health conditions has increased dramatically in the past four decades7 as larger numbers of chronically ill children survive beyond the age of 10.8 Despite the lack of data on adolescents' health making it difficult to determine the prevalence of chronic illnesses in this age group9, it is known that one in ten adolescents suffers from a chronic condition worldwide.10 In fact, national population based studies from Western countries show that 20-30% of teenagers have a chronic illness, defined as one that lasts longer than six months.8 The most prevalent chronic illness among adolescents is asthma and the one with the highest incidence is diabetes mellitus, particularly type II.9 Traditionally, healthcare professionals have been mainly investing in health education activities, through the transmission of knowledge with a view to creating habits, customs and behaviors, and promoting healthy lifestyles. However, empowering people does not only consist of giving them the right information11 , i.e. good information is not enough to cause people to make changes.12 The motivation or desire to change unhealthy behaviors and habits depends on many factors, namely intrinsic motivation, control over personal decisions, self-confidence and perception of effectiveness, personal ambivalence, and individualized assistance.12 Many professionals assume that supplying knowledge is sufficient for behavioral changes; however, even very good advice often fails to generate behavioral change. After all, people continue to engage in unhealthy behaviors despite clearly knowing what they should do and how to change. "What is lacking is the motivation to apply that knowledge".13, p.1233 In fact, behavioral change is a complex phenomenon with multiple determinants that also includes motivational variables. It is associated with ambivalent processes expressed in the dilemma between keeping the current status and moving on to new ways of acting. For example, telling adolescents that if they keep on engaging in a certain behavior, they are increasing the risk of developing a long-term condition such as cardiovascular disease, stroke or diabetes is rarely enough to trigger the desired behavioral change; people are more likely to change when they believe that the change is really effective and that they are able to implement it.12 Therefore, it is essential to provide specific training for "healthcare professionals to master motivational techniques, avoid confrontation with the users, and facilitate behavioral changes".14 In this context, motivating patients to make behavioral changes is also an important nursing task where change in lifestyle is a major element of patients' treatment and preventive interventions.15 One of the nurse's goals is to help improve a patient's health or help them to manage existing health conditions. Once nurses are in a position where they have to focus on accomplishing tasks and telling patients what needs to be accomplished16, the role of the nurse is expanding even more into the use of motivational strategies.17 MI is bringing nurses back to therapeutic communication and moving them closer to successful health promotion and disease management, by promoting behavior change and empowering their patients. As the nursing profession evolves, MI is seen as a challenge and the basis of nurse's interactions with individuals, families and communities.16, 17 In the same way, MI may be taken as an essential tool in the provision of nursing care to adolescents, being itself a workspace with possible therapeutic effects regarding problems, clarification of doubts, and development of skills.18 In fact, MI may be particularly applicable in work with adolescents because of their specific developmental stage. Adolescents attempt to establish their own autonomy and identity while struggling with social interactions and moral issues, which leads to ambivalence.19 Consistent with the developmental challenges during adolescence, "MI explicitly honors autonomy, people's right and irrevocable ability to decide about their own behavior"20 while allowing the person to explore possibilities for change of risky or maladaptive behaviours.19 MI can be defined as a directive, client-centred counselling style for eliciting behavior change by helping clients to explore and resolve ambivalence. It is most centrally defined not by technique but by its spirit as a facilitative style of interpersonal relationship.21 It is a set of strategies and techniques widely used in clinical practice based on the transtheoretical model of change. The Stages of Change model describes five stages of readiness—precontemplation, contemplation, preparation, action, and maintenance—and provides a framework for understanding behavior change.22 The MI has been widely tested and applied in different areas, such as modification of addictive behaviors, interventions with offenders in the context of justice, eating disorders, promotion of therapeutic adherence among chronic patients, promotion of learning in school settings or intervention with adolescents at risk.18,23 In general, clinical practice has been adopting the perspective of motivation as something relatively immutable, i.e., the adolescent is either motivated for change/treatment and, in these conditions, the professional's role is to help him/her, or the adolescent is not motivated and then change/treatment is not feasible. Alternatively the theoretical model underlying the MI technique postulates that the individual's adherence to change/treatment depends on his/her motivation, which can change throughout the therapeutic intervention. As several studies found positive results for effects of MI24-26 and its use by health professionals is encouraged23,27 nurses may play an important role in patients' process of change. As nurses have a crucial role in clinical contexts, they can facilitate the process of ending risk behaviors and/or adopting positive health behaviors through some motivational techniques, namely with adolescents. A considerable number of systematic reviews about MI already exist pointing to some benefits of its use in the treatment of a broad range of behavioral problems and diseases.13,28,29 Some of the current reviews focus on examining the effectiveness of MI for adolescents with diverse health risks/problems 30-32. However, to date there are no reviews that present and assess the evidence for the use of nurse-led MI in adolescents. Therefore, we have little knowledge of what works for whom (which adolescent subpopulation) under what circumstances (in which setting, for what problem) in relation to motivational interviewing by nurses. There is a clear need for scoping or mapping the use of MI by nurses with adolescents to identify evidence gaps and to inform opportunities for future development in nursing practice. On the other hand, information regarding nurse-led implemented and evaluated interventions, techniques and/or strategies used, contexts of application and adolescents subpopulation groups is dispersed in the literature33-36 which impedes the formulation of precise questions about the effectiveness of those interventions conducted by nurses and therefore the realization of a systematic review. In other words, it is known that different kind of motivational interventions have been implemented in different contexts by nurses, however does not exist a map about all the motivational techniques and/or strategies used. Furthermore the literature does not clarify which is the role of nurses at cross professional motivational intervention implemented programs and finally the outcomes and evaluation of interventions are unclear. Thus, the practical implication of this mapping will be clarifying all these aspects. Without this clarification is not possible to proceed to the realization of a systematic review about the effectiveness of the use of motivational interviews by nurses to promote health behaviors in adolescents, in a particular context and/or health risk behavior; or regarding the effectiveness of certain technique and/or strategy of MI. Consequently, there are important questions about the nature of the evidence in this area that need to be answered before formulating a precise question of effectiveness. This scoping review aims to respond to these questions. An initial search of the JBI Database of Systematic Reviews & Implementation Reports, Cochrane Database of Systematic Reviews, , Database of promoting health effectiveness reviews (DoPHER), The Campbell Library, Medline and CINAHL, has revealed that currently there is no Scoping Review (published or in progress) on the subject. In this context, this scoping review will examine and map the published and unpublished research around the use of MI by nurses implemented and evaluated to promote health behaviors in adolescents; to establish its current extent, range and nature and identify its feasibility, outcomes and gaps in the evidence defining research priorities in this field. This scoping review will be informed by the JBI methodology37 that suggests a five stage methodological framework for conducting scoping reviews which includes: identifying the research question, searching for relevant studies, selecting studies, charting data, collating, summarizing and reporting the results.

Corrosion protection of PVD and paint coatings for selective solar absorber surfaces

The selective solar absorber surface is a fundamental part of a solar thermal collector, as it is responsible for the solar radiation absorption and for reduction of radiation heat losses. The surface’s optical properties, the solar absorption (á) and the emittance (å), have great impact on the solar thermal collector efficiency. In this work, two coatings types were studied: coatings obtained by physical vapor deposition (PVDs) and coatings obtained by projection with different paints (PCs) on aluminum substrates. The most common industrial high performing solar selective absorbers are nowadays produced by vacuum deposition methods, showing some disadvantages, such as lower durability, lower resistance to corrosion, adhesion and scratch, higher cost and complex production techniques. Currently, spectrally selective paints are a potential alternative for absorbing surfaces in low temperature applications, with attractive features such as ease of processing, durability and commercial availability with low cost. Solar absorber surfaces were submitted to accelerated ageing tests, specified in ISO 22975-3. This standard is applicable to the evaluation of the long term behavior and service life of selective solar absorbers for solar collectors working under typical domestic hot water system conditions. The studied coatings have, in the case of PVDs solar absorptions between 0.93 and 0.96 and emittance between 0.07 and 0.10, and in the case of PCs, solar absorptions between 0.91 and 0.93 and emittance between 0.40 and 0.60. In addition to evaluating long term behavior based on artificial ageing tests, it is also important to know the degradation mechanism of different coatings that are currently in the market. Electrochemical impedance spectroscopy (EIS) allows for the assessment of mechanistic information concerning the degradation processes, providing quantitative data as output, which can easily relate to the kinetic parameters of the system. EIS measures were carried out on Gamry FAS2 Femostat coupled with a PCL4 Controller. Two electrolytes were used, 0.5 M NaCl and 0.5 M Na2SO4, and the surfaces were tested at different immersion times up to 4 weeks. The following types of specimens have been tested: Aluminium with/without surface treatment, 3 selective paint coatings (one with a poly(urethane) binder and two with silicone binders) and 2 PVD coatings. Based on the behaviour of the specimens throughout the 4 weeks of immersion, it is possible to conclude that the coating showing the best protective properties corresponds to the selective paint coating with a polyurethane resin followed by the other paint coatings, whereas both the PVD coatings do not confer any protection to the substrate, having a deleterious effect as compared to the untreated aluminium reference.

Transactions and schema evolution in a persistent object-oriented programming system

Applications are subject of a continuous evolution process with a profound impact on their underlining data model, hence requiring frequent updates in the applications' class structure and database structure as well. This twofold problem, schema evolution and instance adaptation, usually known as database evolution, is addressed in this thesis. Additionally, we address concurrency and error recovery problems with a novel meta-model and its aspect-oriented implementation. Modern object-oriented databases provide features that help programmers deal with object persistence, as well as all related problems such as database evolution, concurrency and error handling. In most systems there are transparent mechanisms to address these problems, nonetheless the database evolution problem still requires some human intervention, which consumes much of programmers' and database administrators' work effort. Earlier research works have demonstrated that aspect-oriented programming (AOP) techniques enable the development of flexible and pluggable systems. In these earlier works, the schema evolution and the instance adaptation problems were addressed as database management concerns. However, none of this research was focused on orthogonal persistent systems. We argue that AOP techniques are well suited to address these problems in orthogonal persistent systems. Regarding the concurrency and error recovery, earlier research showed that only syntactic obliviousness between the base program and aspects is possible. Our meta-model and framework follow an aspect-oriented approach focused on the object-oriented orthogonal persistent context. The proposed meta-model is characterized by its simplicity in order to achieve efficient and transparent database evolution mechanisms. Our meta-model supports multiple versions of a class structure by applying a class versioning strategy. Thus, enabling bidirectional application compatibility among versions of each class structure. That is to say, the database structure can be updated because earlier applications continue to work, as well as later applications that have only known the updated class structure. The specific characteristics of orthogonal persistent systems, as well as a metadata enrichment strategy within the application's source code, complete the inception of the meta-model and have motivated our research work. To test the feasibility of the approach, a prototype was developed. Our prototype is a framework that mediates the interaction between applications and the database, providing them with orthogonal persistence mechanisms. These mechanisms are introduced into applications as an {\it aspect} in the aspect-oriented sense. Objects do not require the extension of any super class, the implementation of an interface nor contain a particular annotation. Parametric type classes are also correctly handled by our framework. However, classes that belong to the programming environment must not be handled as versionable due to restrictions imposed by the Java Virtual Machine. Regarding concurrency support, the framework provides the applications with a multithreaded environment which supports database transactions and error recovery. The framework keeps applications oblivious to the database evolution problem, as well as persistence. Programmers can update the applications' class structure because the framework will produce a new version for it at the database metadata layer. Using our XML based pointcut/advice constructs, the framework's instance adaptation mechanism is extended, hence keeping the framework also oblivious to this problem. The potential developing gains provided by the prototype were benchmarked. In our case study, the results confirm that mechanisms' transparency has positive repercussions on the programmer's productivity, simplifying the entire evolution process at application and database levels. The meta-model itself also was benchmarked in terms of complexity and agility. Compared with other meta-models, it requires less meta-object modifications in each schema evolution step. Other types of tests were carried out in order to validate prototype and meta-model robustness. In order to perform these tests, we used an OO7 small size database due to its data model complexity. Since the developed prototype offers some features that were not observed in other known systems, performance benchmarks were not possible. However, the developed benchmark is now available to perform future performance comparisons with equivalent systems. In order to test our approach in a real world scenario, we developed a proof-of-concept application. This application was developed without any persistence mechanisms. Using our framework and minor changes applied to the application's source code, we added these mechanisms. Furthermore, we tested the application in a schema evolution scenario. This real world experience using our framework showed that applications remains oblivious to persistence and database evolution. In this case study, our framework proved to be a useful tool for programmers and database administrators. Performance issues and the single Java Virtual Machine concurrent model are the major limitations found in the framework.

All-regime Lagrangian-Remap numerical schemes for the gas dynamics equations. Applications to the large friction and low Mach coefficients

In this talk, we propose an all regime Lagrange-Projection like numerical scheme for the gas dynamics equations. By all regime, we mean that the numerical scheme is able to compute accurate approximate solutions with an under-resolved discretization with respect to the Mach number M, i.e. such that the ratio between the Mach number M and the mesh size or the time step is small with respect to 1. The key idea is to decouple acoustic and transport phenomenon and then alter the numerical flux in the acoustic approximation to obtain a uniform truncation error in term of M. This modified scheme is conservative and endowed with good stability properties with respect to the positivity of the density and the internal energy. A discrete entropy inequality under a condition on the modification is obtained thanks to a reinterpretation of the modified scheme in the Harten Lax and van Leer formalism. A natural extension to multi-dimensional problems discretized over unstructured mesh is proposed. Then a simple and efficient semi implicit scheme is also proposed. The resulting scheme is stable under a CFL condition driven by the (slow) material waves and not by the (fast) acoustic waves and so verifies the all regime property. Numerical evidences are proposed and show the ability of the scheme to deal with tests where the flow regime may vary from low to high Mach values.

A perspectiva do utilizador do Facebook relativamente à escolha de alojamento turístico

Atualmente assistimos a um aumento exponencial do uso dos social media como meio para planear as viagens lazer, bem como procurar por informações relativas a hotéis, restaurantes e outras empresas na indústria de turismo e viagens. Os social media criaram um novo canal de distribuição, tendo este influenciado e alterado a forma como os viajantes determinam o local onde vão ficar alojados. É importante que as empresas hoteleiras compreendam o comportamento dos consumidores face aos social media e, assim, determinar qual a forma de comunicação e que informações deverão disponibilizar nos seus sites. A título de exemplo, os hotéis conseguem interagir com os clientes através das redes sociais, como o Facebook, Instagram ou Youtube, partilhar diversos tipos de conteúdos informativos e prestar assistência a questões. O presente estudo tem como objetivo compreender o uso das redes sociais, apresentando-se um maior foco na rede social Facebook, na promoção de um estabelecimento hoteleiro e, com isto, determinar se a promoção dos serviços hoteleiros através deste meio, apresenta influência na tomada de decisão de escolha de alojamento turístico. Por outro lado, pretendese analisar o impacto das avaliações/recomendações realizadas pelos consumidores presentes no Facebook. Adotou-se uma metodologia quantitativa, através de um questionário online. Para analisar as hipóteses de estudo recorreu-se a diversos testes estatísticos. Os principais resultados demonstraram que são diversos os meios online e offline em que os consumidores se baseiam para fazer a sua decisão de escolha de alojamento, sendo um destes o Facebook, que apresenta uma grande representatividade. O word-of-mouth, contabilizado através das opiniões dos antigos clientes presentes em sites de avaliações e em redes sociais revela-se uma componente determinante no processo de recolha de informação sobre determinado alojamento e consequentemente influenciador na escolha de alojamento. Por último, verificou-se que o Facebook apresenta ter um papel decisivo no processo de decisão de escolha de alojamento turístico.

Construction and demolition waste as a source of PVC for recycling

Construction and demolition waste can contain considerable amounts of polyvinyl chloride (PVC). This paper describes a study of the recycling of PVC pipes collected from such waste materials. In a sorting facility for the specific disposal of construction and demolition waste, PVC was found to represent one-third of the plastics separated by workers. Pipes were sorted carefully to preclude any possible contamination by poly(ethylene terephthalate) (PET) found in the waste. The material was ground into two distinct particle sizes (final mesh of 12.7 and 8 mm), washed, dried and recycled. The average formulation of the pipes was determined based on ash content tests and used in the fabrication of a similar compound made mainly of virgin PVC. Samples of recycled pipes and of compound based on virgin material were subjected to tensile and impact tests and provided very similar results. These results are a good indication of the application potential of the recycled material and of the fact that longer grinding to obtain finer particles is not necessarily beneficial.

Desevolvimento de nanocompósitos de poli(metacrilato de metila)/argila processados por mistura no estado fundido

Poly(methyl methacrylate)/clay nanocomposites were prepared by melt mixing using a montmorillonite-rich clay (MMT). The clay in natura was treated with acrylic acid to facilitate the dispersion in the polymer matrix. A masterbatch of PMMA/clay was prepared and combined with the pure PMMA and then subjected to extrusion process using singlescrew and twin-screw extruders followed by injection. Nanocomposites were processed with clay contents of 1, 3, 5 and 8 wt.%. The effect of shear processing on the morphology of the nanocomposites was evaluated by XRD, SEM and TEM. Thermal and mechanical properties of the nanocomposites were investigated through TGA, DSC, HDT, VICAT, tensile and impact tests, to evaluate the effect of the addition of clay to the PMMA matrix. Flammability tests were also conducted to investigate the effect of the addition of clay on the flame retardation properties. SEM images of the nanocomposites indicated the presence of clay agglomerates, which resulted in the reduction of properties such as thermal stability, mechanical strength and impact resistance, and increased the rate of burning for materials processed by both extrusion routes

Conciliar tensões entre as dimensões social e financeira em projetos de impact investment : um estudo de caso

Mestrado em Ciências Empresariais

A proposed impact assessment method for genetically modified plants (AS-GMP Method).

An essential step in the development of products based on biotechnology is an assessment of their potential economic impacts and safety, including an evaluation of the potential impact of transgenic crops and practices related to their cultivation on the environment and human or animal health. The purpose of this paper is to provide an assessment method to evaluate the impact of biotechnologies that uses quantifiable parameters and allows a comparative analysis between conventional technology and technologies using GMOs. This paper introduces amethod to performan impact analysis associatedwith the commercial release and use of genetically modified plants, the Assessment SystemGMPMethod. The assessment is performed through indicators that are arranged according to their dimension criterion likewise: environmental, economic, social, capability and institutional approach. To perform an accurate evaluation of the GMP specific indicators related to genetic modification are grouped in common fields: genetic insert features, GMplant features, gene flow, food/feed field, introduction of the GMP, unexpected occurrences and specific indicators. The novelty is the possibility to include specific parameters to the biotechnology under assessment. In this case by case analysis the factors ofmoderation and the indexes are parameterized to perform an available assessment.

Particle number and mass emission factors from combustion of wood samples collected from Queensland forest

Knowledge of particle emission characteristics associated with forest fires and in general, biomass burning, is becoming increasingly important due to the impact of these emissions on human health. Of particular importance is developing a better understanding of the size distribution of particles generated from forest combustion under different environmental conditions, as well as provision of emission factors for different particle size ranges. This study was aimed at quantifying particle emission factors from four types of wood found in South East Queensland forests: Spotted Gum (Corymbia citriodora), Red Gum (Eucalypt tereticornis), Blood Gum (Eucalypt intermedia), and Iron bark (Eucalypt decorticans); under controlled laboratory conditions. The experimental set up included a modified commercial stove connected to a dilution system designed for the conditions of the study. Measurements of particle number size distribution and concentration resulting from the burning of woods with a relatively homogenous moisture content (in the range of 15 to 26 %) and for different rates of burning were performed using a TSI Scanning Mobility Particle Sizer (SMPS) in the size range from 10 to 600 nm and a TSI Dust Trak for PM2.5. The results of the study in terms of the relationship between particle number size distribution and different condition of burning for different species show that particle number emission factors and PM2.5 mass emission factors depend on the type of wood and the burning rate; fast burning or slow burning. The average particle number emission factors for fast burning conditions are in the range of 3.3 x 1015 to 5.7 x 1015 particles/kg, and for PM2.5 are in the range of 139 to 217 mg/kg.

Current rural valuation practice : a survey of valuers and agribusiness managers on farm management and sustainable rural land use

Over the past 20 years the nature of rural valuation practice has required most rural valuers to undertake studies in both agriculture (farm management) and valuation, especially if carrying out valuation work for financial institutions. The additional farm financial and management information obtained by rural valuers exceeds that level of information required to value commercial, retail and industrial by the capitalisation of net rent/profit valuation method and is very similar to the level of information required for the valuation of commercial and retail property by the Discounted Cash Flow valuation method. On this basis the valuers specialising in rural valuation practice have the necessary skills and information to value rural properties by an income valuation method, which can focus on the long term environmental and economic sustainability of the property being valued. This paper will review the results of an extensive survey carried out by rural property valuers in Australia, in relation to the impact of farm management on rural property values and sustainable rural land use. A particular focus of the research relates to the increased awareness of the problems of rural land degradation in Australia and the subsequent impact such problems have on the productivity of rural land. These problems of sustainable land use have resulted in the need to develop an approach to rural valuation practice that allows the valuer to factor the past management practices on the subject rural property into the actual valuation figure. An analysis of the past farm management and the inclusion of this data into the valuation methodology provides a much more reliable indication of farm sustainable economic value than the existing direct comparison valuation methodology.