The effects of some variables on CO2 laser-MAG hybrid welding

The CO2-laser-MAG hybrid welding process has been shown to be a productive choice for the welding industry, being used in e.g. the shipbuilding, pipe and beam manufacturing, and automotive industries. It provides an opportunity to increase the productivity of welding of joints containing air gaps compared with autogenous laser beam welding, with associated reductions in distortion and marked increases in welding speeds and penetration in comparison with both arc and autogenous laser welding. The literature study indicated that the phenomena of laser hybrid welding are mostly being studied using bead-on-plate welding or zero air gap configurations. This study shows it very clearly that the CO2 laser-MAG hybrid welding process is completely different, when there is a groove with an air gap. As in case of industrial use it is excepted that welding is performed for non-zero grooves, this study is of great importance for industrial applications. The results of this study indicate that by using a 6 kW CO2 laser-MAG hybrid welding process, the welding speed may also be increased if an air gap is present in the joint. Experimental trials indicated that the welding speed may be increased by 30-82% when compared with bead-on-plate welding, or welding of a joint with no air gap i.e. a joint prepared as optimum for autogenous laser welding. This study demonstrates very clearly, that the separation of the different processes, as well as the relative configurations of the processes (arc leading or trailing) affect welding performance significantly. These matters influence the droplet size and therefore the metal transfer mode, which in turn determined the resulting weld quality and the ability to bridge air gaps. Welding in bead-onplate mode, or of an I butt joint containing no air gap joint is facilitated by using a leading torch. This is due to the preheating effect of the arc, which increases the absorptivity of the work piece to the laser beam, enabling greater penetration and the use of higher welding speeds. With an air gap present, air gap bridging is more effectively achieved by using a trailing torch because of the lower arc power needed, the wider arc, and the movement of droplets predominantly towards the joint edges. The experiments showed, that the mode of metal transfer has a marked effect on gap bridgeability. Transfer of a single droplet per arc pulse may not be desirable if an air gap is present, because most of the droplets are directed towards the middle of the joint where no base material is present. In such cases, undercut is observed. Pulsed globular and rotational metal transfer modes enable molten metal to also be transferred to the joint edges, and are therefore superior metal transfer modes when bridging air gaps. It was also found very obvious, that process separation is an important factor in gap bridgeability. If process separation is too large, the resulting weld often exhibits sagging, or no weld may be formed at all as a result of the reduced interaction between the component processes. In contrast, if the processes are too close to one another, the processing region contains excess molten metal that may create difficulties for the keyhole to remain open. When the distance is optimised - i.e. a separation of 0-4 mm in this study, depending on the welding speed and beam-arc configuration - the processes act together, creating beneficial synergistic effects. The optimum process separation when using a trailing torch was found to be shorter (0-2 mm) than when a leading torch is used (2-4 mm); a result of the facilitation of weld pool motion when the latter configuration is adopted. This study demonstrates, that the MAG process used has a strong effect on the CO2-laser-MAG hybrid welding process. The laser beam welding component is relatively stable and easy to manage, with only two principal processing parameters (power and welding speed) needing to be adjusted. In contrast, the MAG process has a large number of processing parameters to optimise, all of which play an important role in the interaction between the laser beam and the arc. The parameters used for traditional MAG welding are often not optimal in achieving the most appropriate mode of metal transfer, and weld quality in laser hybrid welding, and must be optimised if the full range of benefits provided by hybrid welding are to be realised.

The Dialogic Turn in Educational Psychology

The increasing presence of and claim for dialogue in today"s society has already had an impact on the theory and practice of learning. Whereas in the past individual and cognitive elements were seen as crucial to learning, since about two decades ago, scientific literature indicates that culture, interaction and dialogue are the key factors. In addition, the research project of highest scientific rank and with most resources dedicated to the study of school education in the Framework Program of the European Union: INCLUD-ED shows that the practices of successful schools around Europe are in line with the dialogic approach to learning. This article presents the dialogic turn in educational psychology, consisting of moving from symbolic conceptions of mind and internalist perspectives that focus on mental schemata of previous knowledge, to theories that see intersubjectivity and communication as the primary factors in learning. The paper deepens on the second approach.

Regional Science trends through the analysis of the main facts of the 51st ERSA Conference

The 51st ERSA Conference held in Barcelona in 2011 was one of the largest ever. By examining the characteristics of the conference, this paper identifies the main trends in Regional Science and draws on a broad array of sources of information: the delegates" demographic details, the conference program itself, a satisfaction survey conducted among delegates, a quality survey addressed to those chairing the sessions and, finally, a bibliometric database including each author signing a paper presented at the conference. We finally run a regression analysis from which we show that for ERSA delegates what matters most is quality, and this must be the direction that future conferences should move toward. Ultimately, ERSA conferences are comprehensive, all-embracing occasions, representing an ideal opportunity for regional scientists to present their work to each other and to network.

Prevalence and clinical outcomes for patients with MET protein expression in patients with non-small cell lung cancer in Europe: Results from the European Thoracic Oncology Platform Lungscape Project.

Aim The reported prevalence of MET overexpression varies from 25-55% in non-small cell lung cancer (NSCLC) and clinical correlations are emerging slowly. In a well-defined NSCLC cohort of the Lungscape program, we explore the epidemiology, the natural history of IHC MET positivity and its association to OS, RFS and TTR. Methods Resected stage I-III NSCLC identified based on the quality of clinical data and FFPE tissue availability were assessed for MET expression using immunohistochemistry (IHC) on TMAs (CONFIRM anti total c-MET assay, clone SP44, Ventana BenchMark platform). All cases were analysed at participating pathology laboratories using the same protocol, after passing an external quality assurance program. MET positive status is defined as ≥ 50% of tumor cells staining with 2+ or 3+ intensity. Results A total of 2709 cases are included in the iBiobank and will be analysed. IHC MET expression is currently available for 1552 patients, with positive MET IHC staining in 380 cases [24.5%; IHC 3+ in 157 cases (41.3%) and 2+ in 223 cases (58.7%)]. The cohort of 1552 patients includes 48.2%, 44.7% and 4.4% cases of adenocarcinoma, squamous and large cell histologies, respectively. IHC MET status was independent of stage, age and smoking history. Significant differences in MET positivity were associated with gender (32% vs. 21% for female vs. male, p < 0.001), with performance status (25% vs. 18% for 0 vs. 1-3, p = 0.006), and histology (34%, 14% and 24% for adenocarcinoma, squamous and large cell carcinoma, p < 0.001). IHC MET positivity was independent of the IHC ALK status (p = 0.08). At last FU, 52% of patients were still alive, with a median FU of 4.8 yrs. No association of IHC MET was found with OS, RFS or TTR. Conclusions The preliminary results for this large multicentre European cohort describe a prevalence of MET overexpression that seems lower than previous observations in NSCLC, such as reported for the OAM4971g trial, suggesting potential biological differences between surgically resected and metastatic disease. Analysis for the full cohort is ongoing and results will be presented. Disclosure L. Bubendorf: Disclosures: Stock ownership: Roche Advisory boards: Roche, Pfizer Research support: Roche; K. Schulze: Full time employee of Roche; A. Das-Gupta: I am a full time employee of Roche. All other authors have declared no conflicts of interest.

Prospective motion correction with FID-triggered image navigators

In this work, we propose a method for prospective motion correction in MRI using a novel image navigator module, which is triggered by a free induction decay (FID) navigator. Only when motion occurs, the image navigator is run and new positional information is obtained through image registration. The image navigator was specifically designed to match the impact on the magnetization and the acoustic noise of the host sequence. This detection-correction scheme was implemented for an MP-RAGE sequence and 5 healthy volunteers were scanned at 3T while performing various head movements. The correction performance was demonstrated through automated brain segmentation and an image quality index whose results are sensitive to motion artifacts.

Elders and the ITCs use to communicate with children and grandchildren

Past research in using ICTs (Information and Communication Technologies) in interpersonal communication showed that age plays an important role. There is a general assumption that the elderly are left behind regarding the adoption and the use of ICTs. Furthermore, elders tend to use ICTs mainly for instrumental purposes and the use is rather non-sophisticated. When elders are using ICTs to maintain their social network, similar patterns could be found: They start using internet, or intensify its use, when their children move abroad while they might decrease using the tool if the motivation ends. In this research we explore elders' incentives to go online and use internet services to communicate; the type of agencies they use to communicate with children and grandchildren abroad; and the situations that make them stop using the ICTs or even reject internet mediated communications. We base our discussion on the empirical evidence the two authors gathered in different cities and countries: Barcelona, Romania, Toronto, Los Angeles, Montevideo and Lima, through semi-structured interviews and observation, with people aged 60 years old and over. The results show that the ability for using ICT tools in an autonomous way is a better explanation than age. In this, we distinguish between assisted users and autonomous users. We found that oldest seniors and those seniors who are less socially active are more likely to be assisted users than those who are socially or professionally active. For them communication with their children and grandchildren abroad follows no agency or it is mediated by significant others from their local social network, who are able to use ICTs and select specific information to share, in the second step, with the elder. For some younger participants the use of ICTs is rather situational and imposed by their children or grandchildren, who installed the tool in the first place and assisted them in using it. Finally, other elders describe a proficient and independent use of ICTs so they use the devices and services the way they want to.We discuss the implications of the patterns in using ICTs, for elders' social life and their relationships with children and grandchildren. First, we emphasis the fact that those elders rejecting the ICTs or being unskilled in using them to communicate might be left out from their family circle, particularly when children are abroad -they would experience more isolation. Second, we underline the fact that when children and grandchildren are the ones that control the ICTs used by their parents and grandparents, they are controlling also the information flow and this will redefine the power relations between elders and their younger relatives.

The learning about imaging diagnosis technology

Objective To investigate the learning about management of the technology (efficient use, acquisition and maintenance of imaging diagnosis equipment) in the radiology residency program of Escola Paulista de Medicina - Universidade Federal de São Paulo, with a view to improving the education of radiologists. Materials and Methods Exploratory research where residents, faculty staff and tutors of the program were quantitative and qualitatively approached with Likert scale questionnaires (46), and deepening with recorded interviews (18) and categorization based upon meaning units (thematic analysis). Results Among the participants, 66% agreed that they had the opportunity of learning about the use of radiological equipment; for 61% the program should include knowledge on the importance of acquiring equipment; and 72% emphasized the lack of learning about equipment management and maintenance. Conclusion As the major moment in the education of specialists, the medical residency program provides residents with a favorable environment to the learning of the skills required to the future of their professional practice, but with limited emphasis on the management of the technology: efficient use, acquisition and mainly maintenance of equipment, still poorly explored. Both the investigated program and the medical residency in radiology should incorporate, whenever possible, the commitment with the training in supplementary skills related to equipment management, developing the competence of the future radiologists.

Jane Eyre: del text a la pantalla : Un estudi comparatiu entre l'obra de Charlotte Brontë i l'adaptació cinematogràfica de Cary Fukunaga

Treball de fi de màster que estudia comparativament les relacions entre la novel·la "Jane Eyre" de Charlotte Brontë i l'adaptació cinematogràfica de la mateixa realitzada pel director Cary Fukunaga.

Journal of the Brazilian Chemical Society (JBCS): 10 anos da criação à consolidação

The main objectives of this article are to present and discuss the facts that lead to the conception of JBCS in 1987, its birth in 1990 and the stages traveled until its consolidation. The community's of Chemistry participation and the role of the Sub-program of Chemistry and Chemical Engineering of PADCT are emphasized.

Heat transfer in superheaters of the bubbling fluidized bed boiler conversions

It is often reasonable to convert old boiler to bubbling fluidized bed boiler instead of building a new one. Converted boiler consists of old and new heat surfaces which must be fitted to operate together. Prediction of heat transfer in not so ideal conditions sets challenges for designers. Two converted boilers situated in Poland were studied on the grounds of acceptance tests and further studies. Calculation of boiler process was performed with boiler design program. Main interest was heat transfer in superheaters and factors affecting it. Theory for heat transfer is presented according to information found from literature. Results obtained from experimental studies and calculations have been compared. With correct definitions calculated parameters corresponded well to measured data at boiler maximum design load. However overload situations revealed to be difficult to model at least without considering changes in the combustion process which requires readjustments to the design program input values.

Highly eccentric hip-hop solutions of the 2N

We show the existence of families of hip-hop solutions in the equal-mass 2N-body problem which are close to highly eccentric planar elliptic homographic motions of 2N bodies plus small perpendicular non-harmonic oscillations. By introducing a parameter ϵ, the homographic motion and the small amplitude oscillations can be uncoupled into a purely Keplerian homographic motion of fixed period and a vertical oscillation described by a Hill type equation. Small changes in the eccentricity induce large variations in the period of the perpendicular oscillation and give rise, via a Bolzano argument, to resonant periodic solutions of the uncoupled system in a rotating frame. For small ϵ ≠ 0, the topological transversality persists and Brouwer's fixed point theorem shows the existence of this kind of solutions in the full system

The Influence of spanish vihuela and lute music on the development of early seventeenth century english keyboard music as exemplified in the Fitzwilliam virginal book

Digitoitu 29.10 2008.

Simulação de espectros de ressonância paramagnética eletrônica (RPE) através do programa NLSL

EPR users often face the problem of extracting information from frequently low-resolution and complex EPR spectra. Simulation programs that provide a series of parameters, characteristic of the investigated system, have been used to achieve this goal. This work describes the general aspects of one of those programs, the NLSL program, used to fit EPR spectra applying a nonlinear least squares method. Several motion regimes of the probes are included in this computational tool, covering a broad range of spectral changes. The meanings of the different parameters and rotational diffusion models are discussed. The anisotropic case is also treated by including an orienting potential and order parameters. Some examples are presented in order to show its applicability in different systems.

Bowing the violin : a case study for auditory-motor pattern modelling in the context of music performance

This project addresses methodological and technological challenges in the development of multi-modal data acquisition and analysis methods for the representation of instrumental playing technique in music performance through auditory-motor patterning models. The case study is violin playing: a multi-modal database of violin performances has been constructed by recording different musicians while playing short exercises on different violins. The exercise set and recording protocol have been designed to sample the space defined by dynamics (from piano to forte) and tone (from sul tasto to sul ponticello), for each bow stroke type being played on each of the four strings (three different pitches per string) at two different tempi. The data, containing audio, video, and motion capture streams, has been processed and segmented to facilitate upcoming analyses. From the acquired motion data, the positions of the instrument string ends and the bow hair ribbon ends are tracked and processed to obtain a number of bowing descriptors suited for a detailed description and analysis of the bow motion patterns taking place during performance. Likewise, a number of sound perceptual attributes are computed from the audio streams. Besides the methodology and the implementation of a number of data acquisition tools, this project introduces preliminary results from analyzing bowing technique on a multi-modal violin performance database that is unique in its class. A further contribution of this project is the data itself, which will be made available to the scientific community through the repovizz platform.

Insulation System in an Integrated Motor Compressor

A high-speed and high-voltage solid-rotor induction machine provides beneficial features for natural gas compressor technology. The mechanical robustness of the machine enables its use in an integrated motor-compressor. The technology uses a centrifugal compressor, which is mounted on the same shaft with the high-speed electrical machine driving it. No gearbox is needed as the speed is determined by the frequency converter. The cooling is provided by the process gas, which flows through the motor and is capable of transferring the heat away from the motor. The technology has been used in the compressors in the natural gas supply chain in the central Europe. New areas of application include natural gas compressors working at the wellheads of the subsea gas reservoir. A key challenge for the design of such a motor is the resistance of the stator insulation to the raw natural gas from the well. The gas contains water and heavy hydrocarbon compounds and it is far harsher than the sales gas in the natural gas supply network. The objective of this doctoral thesis is to discuss the resistance of the insulation to the raw natural gas and the phenomena degrading the insulation. The presence of partial discharges is analyzed in this doctoral dissertation. The breakdown voltage of the gas is measured as a function of pressure and gap distance. The partial discharge activity is measured on small samples representing the windings of the machine. The electrical field behavior is also modeled by finite element methods. Based on the measurements it has been concluded that the discharges are expected to disappear at gas pressures above 4 – 5 bar. The disappearance of discharges is caused by the breakdown strength of the gas, which increases as the pressure increases. Based on the finite element analysis, the physical length of a discharge seen in the PD measurements at atmospheric pressure was approximated to be 40 – 120 m. The chemical aging of the insulation when exposed to raw natural gas is discussed based on a vast set of experimental tests with the gas mixture representing the real gas mixture at the wellhead. The mixture was created by mixing dry hydrocarbon gas, heavy hydrocarbon compounds, monoethylene glycol, and water. The mixture was chosen to be more aggressive by increasing the amount of liquid substances. Furthermore, the temperature and pressure were increased, which resulted in accelerated test conditions. The time required to detect severe degradation was thus decreased. The test program included a comparison of materials, an analysis of the e ects of di erent compounds in the gas mixture, namely water and heavy hydrocarbons, on the aging, an analysis of the e ects of temperature and exposure duration, and also an analysis on the e ect of sudden pressure changes on the degradation of the insulating materials. It was found in the tests that an insulation consisting of mica, glass, and epoxy resin can tolerate the raw natural gas, but it experiences some degradation. The key material in the composite insulation is the resin, which largely defines the performance of the insulation system. The degradation of the insulation is mostly determined by the amount of gas mixture di used into it. The di usion was seen to follow Fick’s second law, but the coe cients were not accurately defined. The di usion was not sensitive to temperature, but it was dependent upon the thermodynamic state of the gas mixture, in other words, the amounts of liquid components in the gas. The weight increase observed was mostly related to heavy hydrocarbon compounds, which act as plasticizers in the epoxy resin. The di usion of these compounds is determined by the crosslink density of the resin. Water causes slight changes in the chemical structure, but these changes do not significantly contribute to the aging phenomena. Sudden changes in pressure can lead to severe damages in the insulation, because the motion of the di used gas is able to create internal cracks in the insulation. Therefore, the di usion only reduces the mechanical strength of the insulation, but the ultimate breakdown can potentially be caused by a sudden drop in the pressure of the process gas.