Modified natural cycle in vitro fertilization an alternative in vitro fertilization treatment with lower costs per achieved pregnancy but longer treatment time

OBJECTIVE To analyze the cost and time requirement per achieved pregnancy in optimized modified natural cycle in vitro fertilization (mNC-IVF) based on a treatment protocol with very few consultations and to compare those with conventional gonadotropin-stimulated aVF (clVF) cycles. STUDY DESIGN Mono centric prospective trial. Eighty infertile patients each received 1 modified mNC-IVF cycle using low doses of the clomiphene citrate. Based on the number of consultations and the clinical pregnancy rate per cycle, the total costs and required time to achieve a pregnancy were analyzed and compared with cIVF. Calculations for cIVF were based on standard therapy protocols and outcomes of European registries. RESULTS Patients (21-42 years old, 35.4 +/- 4.7 years) undergoing mNC-IVF required on average 1.2 consultations before follicle aspiration. Pregnancy rate per transfer and per initiated cycle were 25% and 13.6%, respectively. Multiple pregnancies did not occur. According to the calculations, total costs per pregnancy rate were around 15% lower with mNC-IVF as compared to cIVF. In contrast, time to achieve an equal pregnancy rate was calculated to take around 30% longer with mNC-IVF as compared to cIVF. CONCLUSION mNC-IVF using very low dosages of clomiphene citrate avoids multiple pregnancies and is less expensive but more time consuming per achieved pregnancy when compared to clVF.

Multifunctional Coordination Compounds: Design and Properties

Cleverly designed molecular building blocks provide chemists with the tools of a powerful molecular-scale construction set. They enable them to engineer materials having a predictable order and useful solid-state properties. Hence, it is in the realm of supramolecular chemistry to follow a strategy for synthesizing materials which combine a selected set of properties, for instance from the areas of magnetism, photophysics and electronics. As a successful approach, host/guest solids which are based on extended anionic, homo- and bimetallic oxalato-bridged transition-metal compounds with two-and three-dimensional connectivities have been investigated. In this report, a brief review is given on the structural aspects of this class of compounds followed by a presentation of a thermal and magnetic study for two distinct, heterometallic oxalato-bridged layer compounds.

Modification of aviary design reduces incidence of falls, collisions and keel bone damage in laying hens

Non-cage housing systems for laying hens such as aviaries provide greater freedom to perform species-specific behavior and thus are thought to improve welfare of the birds; however, aviaries are associated with a high prevalence of keel bone damage (fractures and deviations), which is a major welfare problem in commercial laying hens. Potential causes of keel bone damage are falls and collisions with internal housing structures that occur as birds move between tiers or perches in the aviary. The aim of this study was to investigate the scope for reducing keel bone damage by reducing falls and collisions through modifications of aviary design. Birds were kept in 20 pens in a laying hen house (225 hens per pen) that were assigned to four different treatments (n = 5 pens per treatment group) including (1) control pens and pens modified by the addition of (2) perches, (3) platforms and (4) ramps. Video recordings at 19, 22, 29, 36 and 43 weeks of age were used to analyze controlled movements and falls (including details on occurrence of collision, cause of fall, height of fall and behavior after fall) during the transitional dusk and subsequent dark phase. Palpation assessments (focusing on fractures and deviations) using 20 focal hens per pen were conducted at 18, 20, 23, 30, 37, 44, 52 and 60 weeks of age. In comparison to the control group, we found 44% more controlled movements in the ramp (P = 0.003) and 47% more controlled movements in the platform treatments (P = 0.014) as well as 45% fewer falls (P = 0.006) and 59% fewer collisions (P < 0.001) in the ramp treatment. There were no significant differences between the control and perch treatments. Also, at 60 weeks of age, 23% fewer fractured keel bones were found in the ramp compared with the control treatment (P = 0.0053). After slaughter at 66 weeks of age, no difference in keel bone damage was found between treatment groups and the prevalence of fractures increased to an average of 86%. As a potential mechanism to explain the differences in locomotion, we suggest that ramps facilitated movement in the vertical plane by providing a continuous path between the tiers and thus supported more natural behavior (i.e. walking and running) of the birds. As a consequence of reducing events that potentially damage keel bones, the installation of ramps may have reduced the prevalence of keel fractures for a major portion of the flock cycle. We conclude that aviary design and installation of specific internal housing structures (i.e. ramps and platforms) have considerable potential to reduce keel bone damage of laying hens in aviary systems.

A Qualitative Study of the Assistive Technology Decision-Making Process in Four Pennsylvania School Districts

The purpose of this study was to gain an understanding of the Assistive Technology decision making process at four regional school districts in Pennsylvania. A qualitative case study research method involving the triangulation of data sources was implemented to collect and analyze data. Through an analysis of the data, three major topics emerged that will be addressed in the body of this paper: (a) the procedure for determining assistive technology needs and the dynamics of the decision-making process, b) the cohesiveness of Special Education and General Education programs, and c) major concerns that impact the delivery of assistive technology services.

Impact of a modified dietary plan on the health related quality of life of minority participants in the Women's Healthy Eating and Living (WHEL) Study

Advances in medical technology, in genetics, and in clinical research have led to early detection of cancer, precise diagnosis, and effective treatment modalities. Decline in cancer incidence and mortality due to cancer has led to increased number of long-term survivors. However, the ethnic minority population has not experienced this decline and still continues to carry a disparate proportion of the cancer burden. Majority of the clinical research including survivorship studies have recruited and continue to recruit a convenient sample of middle- to upper-class Caucasian survivors. Thus, minorities are underrepresented in cancer research in terms of both clinical studies and in health related quality of life (HRQOL) studies. ^ Life style and diet have been associated with increased risk of breast cancer. High vegetable low fat diet has been shown to reduce recurrence of breast cancer and early death. The Women's Healthy Eating and Living Study is an ongoing multi-site randomized controlled trial that is evaluating the high-vegetable low fat diet in reducing the recurrence of breast cancer and early death. The purpose of this dissertation was to (1) compare the impact of the modified diet on the HRQOL during the first 12-month period on specific Minorities and matched Caucasians; (2) identify predictors that significantly impact the HRQOL of the study participants; and (3) using the structural equation modeling assess the impact of nutrition on the HRQOL of the intervention group participants. Findings suggest that there are no significant differences in change in HRQOL between Minorities and Caucasians; between Minorities in the intervention group and those in the comparison group; and between women in the intervention group and those in the comparison group. Minority indicator variable and Intervention/Comparison group indicator variable were not found to be good predictors of HRQOL. Although the structural equation models suggested viable representation of the relationship between the antecedent variables, the mediating variables and the two outcome variables, the impact of nutrition was not statistically significant to be included in the model. This dissertation, by analyzing the HRQOL of minorities in the WHEL Study, attempted to add to the knowledge base specific to minority cancer survivors. ^

"Teens talk healthy weight": A video technology project

Purpose. The purpose of this study was to investigate the impact of a motivational weight management DVD on knowledge of obesity related diseases, readiness, motivation, and self-efficacy to lose weight, connectedness to their care provider, and patients return to clinic. Design. A randomized control trial was conducted in which 40 overweight/obese adolescents and their parents/caregivers were randomly assigned to standard care alone or standard care plus DVD. Subjects completed a set of pre- and post-questionnaire measures. A group of 22 patients was also formed as a historical control group in order to account for the potential effect of extra attention given to subjects prospectively enrolled. Methods. The adolescents and their parent/caregiver were placed into a patient room. Consent was obtained and a set of written pre-questionnaires were given to both the parent and the adolescent. Standard care was provided to all patients by the Registered Dietitian and physician; the DVD was shown in addition to standard care among the intervention group. A set of post-questionnaires were given and compensation was provided. Analysis. Groups were compared to determine equivalence at baseline. Analysis of covariance was used to evaluate changes over time, while controlling for pre-test scores and race/ethnicity. Results. Parents who viewed the DVD experienced greater changes in correct knowledge as compared to parents who did not view the DVD. Conclusion. Our study found only one substantial benefit of the DVD beyond standard clinical practices. This is an important area for change as it increased awareness of obesity as a serious disease and has future clinical implications.^

STRATEGIES FOR THE TRANSFER OF APPROPRIATE TECHNOLOGY TO DEVELOPING COUNTRIES: THE IMPLEMENTATION AND DEVELOPMENT OF ENVIRONMENTAL HEALTH PROGRAMS IN TUNISIA

This dissertation focuses on Project HOPE, an American medical aid agency, and its work in Tunisia. More specifically this is a study of the implementation strategies of those HOPE sponsored projects and programs designed to solve the problems of high morbidity and infant mortality rates due to environmentally related diarrheal and enteric diseases. Several environmental health programs and projects developed in cooperation with Tunisian counterparts are described and analyzed. These include (1) a paramedical manpower training program; (2) a national hospital sanitation and infection control program; (3) a community sewage disposal project; (4) a well reconstruction project; and (5) a solid-waste disposal project for a hospital.^ After independence, Tunisia, like many developing countries, encountered several difficulties which hindered progress toward solving basic environmental health problems and prompted a request for aid. This study discusses the need for all who work in development programs to recognize and assess those difficulties or constraints which affect the program planning process, including those latent cultural and political constraints which not only exist within the host country but within the aid agency as well. For example, failure to recognize cultural differences may adversely affect the attitudes of the host staff towards their work and towards the aid agency and its task. These factors, therefore, play a significant role in influencing program development decisions and must be taken into account in order to maximize the probability of successful outcomes.^ In 1969 Project HOPE was asked by the Tunisian government to assist the Ministry of Health in solving its health manpower problems. HOPE responded with several programs, one of which concerned the training of public health nurses, sanitary technicians, and aids at Tunisia's school of public health in Nabeul. The outcome of that program as well as the strategies used in its development are analyzed. Also, certain questions are addressed such as, what should the indicators of success be, and when is the time right to phase out?^ Another HOPE program analyzed involved hospital sanitation and infection control. Certain generic aspects of basic hospital sanitation procedures were documented and presented in the form of a process model which was later used as a "microplan" in setting up similar programs in other Tunisian hospitals. In this study the details of the "microplan" are discussed. The development of a nation-wide program without any further need of external assistance illustrated the success of HOPE's implementation strategies.^ Finally, although it is known that the high incidence of enteric disease in developing countries is due to poor environmental sanitation and poor hygiene practices, efforts by aid agencies to correct these conditions have often resulted in failure. Project HOPE's strategy was to maximize limited resources by using a systems approach to program development and by becoming actively involved in the design and implementation of environmental health projects utilizing "appropriate" technology. Three innovative projects and their implementation strategies (including technical specifications) are described.^ It is advocated that if aid agencies are to make any progress in helping developing countries basic sanitation problems, they must take an interdisciplinary approach to progrm development and play an active role in helping counterparts seek and identify appropriate technologies which are socially and economically acceptable. ^

Patient-centered medical home technology effects on hypertension and diabetes control

Background: Hypertension and Diabetes is a public health and economic concern in the United States. The utilization of medical home concepts increases the receipt of preventive services, however, do they also increase adherence to treatments? This study examined the effect of patient-centered medical home technologies such as the electronic health record, clinical support system, and web-based care management in improving health outcomes related to hypertension and diabetes. Methods: A systematic review of the literature used a best evidence synthesis approach to address the general question " Do patient-centered medical home technologies have an effect of diabetes and hypertension treatment?" This was followed by an evaluation of specific examples of the technologies utilized such as computer-assisted recommendations and web-based care management provided by the patient's electronic health record. Ebsco host, Ovid host, and Google Scholar were the databases used to conduct the literature search. Results: The initial search identified over 25 studies based on content and quality that implemented technology interventions to improve communication between provider and patient. After further assessing the articles for risk of bias and study design, 13 randomized controlled studies were chosen. All of the studies chosen were conducted in various primary care settings in both private practices and hospitals between the years 2000 and 2007. The sample sizes of the studies ranged from 42 to 2924 participants. The mean age for all of the studies ranged from 56 to 71 years. The percent women in the studies ranged from one to 78 percent. Over one-third of the studies did not provide the racial composition of the participants. For the seven studies that did provide information about the ethnic composition, 64% of the intervention participants were White. All of the studies utilized some type of web-based or computer-based communication to manage hypertension or diabetes care. Findings on outcomes were mixed, with nine out of 13 studies showing no significant effect on outcomes examined, and four of the studies showing significant and positive impact on health outcomes related to hypertension or diabetes Conclusion: Although the technologies improved patient and provider satisfaction, the outcomes measures such as blood pressure control and glucose control were inconclusive. Further research is needed with diverse ethnic and SES population to investigate the role of patient-centered technologies on hypertension and diabetes control. Also, further research is needed to investigate the effects of innovative medical home technologies that can be used by both patients and providers to increase quality of communication concerning adherence to treatments.^

EPICA Dronning Maud Land EDML ice core drilling protocol

We report on the EPICA Dronning Maud Land (East Antarctica) deep drilling operation. Starting with the scientific questions that led to the outline of the EPICA project, we introduce the setting of sister drillings at NorthGRIP and EPICA Dome C within the European ice-coring community. The progress of the drilling operation is described within the context of three parallel, deep-drilling operations, the problems that occurred and the solutions we developed. Modified procedures are described, such as the monitoring of penetration rate via cable weight rather than motor torque, and modifications to the system (e.g. closing the openings at the lower end of the outer barrel to reduce the risk of immersing the drill in highly concentrated chip suspension). Parameters of the drilling (e.g. core-break force, cutter pitch, chips balance, liquid level, core production rate and piece number) are discussed. We also review the operational mode, particularly in the context of achieved core length and piece length, which have to be optimized for drilling efficiency and core quality respectively. We conclude with recommendations addressing the design of the chip-collection openings and strictly limiting the cable-load drop with respect to the load at the start of the run.

The Technology Gap and the Growth of the Firm: A Case Study of China's Mobile-phone Handset Industry

We have examined the way in which local Chinese firms confronted with a technology gap have achieved growth, using the Chinese handset industry as a case study. Chinese local firms have lacked technology, and have therefore turned to outside firms for development, design, and manufacturing, while they themselves have focused on sales and marketing, using their advantage of familiarity with the Chinese market. Consequently, by establishing a growth condition in which their selection of boundaries counterbalances the technology gap they have been able to expand their market share in comparison with foreign firms.

University-industry technology transfer models: an empirical analysis

The aim of this paper is to contribute to the understanding of the underlying factors in the process of transferring technology from university to industry. Findings point to strategic importance of critical factors as the definition of common objectives, cooperation, motivation, and the elimination of technical and legal barriers. These challenges must have implications in the incorporation of cooperative aspects of research projects in the design of public innovation policies.

Accident Management Actions In An Upper-Head Small-Break Loss-Of-Coolant Accident With High-Pressure Safety Injection Failed

Since the Three Mile Island accident, an important focus of pressurized water reactor (PWR) transient analyses has been a small-break loss-of-coolant accident (SBLOCA). In 2002, the discovery of thinning of the vessel head wall at the Davis Besse nuclear power plant reactor indicated the possibility of an SBLOCA in the upper head of the reactor vessel as a result of circumferential cracking of a control rod drive mechanism penetration nozzle - which has cast even greater importance on the study of SBLOCAs. Several experimental tests have been performed at the Large Scale Test Facility to simulate the behavior of a PWR during an upper-head SBLOCA. The last of these tests, Organisation for Economic Co-operation and Development Nuclear Energy Agency Rig of Safety Assessment (OECD/NEA ROSA) Test 6.1, was performed in 2005. This test was simulated with the TRACE 5.0 code, and good agreement with the experimental results was obtained. Additionally, a broad analysis of an upper-head SBLOCA with high-pressure safety injection failed in a Westinghouse PWR was performed taking into account different accident management actions and conditions in order to check their suitability. This issue has been analyzed also in the framework of the OECD/NEA ROSA project and the Code Applications and Maintenance Program (CAMP). The main conclusion is that the current emergency operating procedures for Westinghouse reactor design are adequate for these kinds of sequences, and they do not need to be modified.

An Analysis of the Influence of Students´ Technological Culture on Their Technology

decade has raised the interest among the research community on the acceptance and use of these systems by both teachers and students. At first, the implementation of LMS was based on their technical design and the adaptation of the learning processes to the virtual environment, neglecting students’ characteristics when the systems were deployed, which led to expensive and failing implementations. The Unified Theory of Acceptance and Use of Technology (UTAUT) proposes a framework which allows the study of the acceptance and use of technology that takes into consideration the students’ characteristics and how they affect the acceptance and the degree of use of educational technology. This study questions the role of the user’s attitude towards use of LMS and uses the UTAUT to examine the moderating effect of technological culture in the adoption of LMS in Spain. The results from the comparison and analysis of three different models confirm the relevance of attitude towards use as an antecedent of intention to use the system, as well as the important moderating effect of gender and technological culture. The discussion of results suggests the need for a more in-depth analysis and interrelations of cultural dimensions in the adoption of educational technologies and learning management systems

Social attitude toward sustainable development in 2025: A case for reinforcing scenario design

This paper shows the role that some foresight tools, such as scenario design, may play in exploring the future impacts of global challenges in our contemporary Society. Additionally, it provides some clues about how to reinforce scenario design so that it displays more in-depth analysis without losing its qualitative nature and communication advantages. Since its inception in the early seventies, scenario design has become one of the most popular foresight tools used in several fields of knowledge. Nevertheless, its wide acceptance has not been seconded by the urban planning academic and professional realm. In some instances, scenario design is just perceived as a story telling technique that generates oversimplified future visions without the support of rigorous and sound analysis. As a matter of fact, the potential of scenario design for providing more in-depth analysis and for connecting with quantitative methods has been generally missed, giving arguments away to its critics. Based on these premises, this document tries to prove the capability of scenario design to anticipate the impacts of complex global challenges and to do it in a more analytical way. These assumptions are tested through a scenario design exercise which explores the future evolution of the sustainable development paradigm (SD) and its implications in the Spanish urban development model. In order to reinforce the perception of scenario design as a useful and added value instrument to urban planners, three sets of implications –functional, parametric and spatial— are displayed to provide substantial and in-depth information for policy makers. This study shows some major findings. First, it is feasible to set up a systematic approach that provides anticipatory intelligence about future disruptive events that may affect the natural environment and socioeconomic fabric of a given territory. Second, there are opportunities for innovating in the Spanish urban planning processes and city governance models. Third, as a foresight tool, scenario design can be substantially reinforced if proper efforts are made to display functional, parametric and spatial implications generated by the scenarios. Fourth, the study confirms that foresight offers interesting opportunities for urban planners, such as anticipating changes, formulating visions, fostering participation and building networks