Some aspects of system design for production management in the rolling-mill industry

Case studies in copper-alloy rolling mill companies showed that existing planning systems suffer from numerous shortcomings. Where computerised systems are in use, these tend to simply emulate older manual systems and still rely heavily on modification by experienced planners on the shopfloor. As the size and number of orders increase, the task of process planners, while seeking to optimise the manufacturing objectives and keep within the production constraints, becomes extremely complicated because of the number of options for mixing or splitting the orders into batches. This thesis develops a modular approach to computerisation of the production management and planning functions. The full functional specification of each module is discussed, together with practical problems associated with their phased implementation. By adapting the Distributed Bill of Material concept from Material Requirements Planning (MRP) philosophy, the production routes generated by the planning system are broken down to identify the rolling stages required. Then to optimise the use of material at each rolling stage, the system generates an optimal cutting pattern using a new algorithm that produces practical solutions to the cutting stock problem. It is shown that the proposed system can be accommodated on a micro-computer, which brings it into the reach of typical companies in the copper-alloy rolling industry, where profit margins are traditionally low and the cost of widespread use of mainframe computers would be prohibitive.

Experimental investigation of the fuel properties of glidfuel, palm oil mill effluent biodiesel and blends

Biofuels derived from industry waste have potential to substitute fossil fuels (Diesel and Gasoline) in internal combustion (IC) engines. Use of waste streams as fuels would help to reduce considerably life-cycle greenhouse gas emissions and minimise waste processing costs. In this study an investigation into the fuel properties of two waste derived biofuels were carried out, they are: (i) Glidfuel (GF) biofuel - a waste stream from paper industry, and (ii) Palm Oil Mill Effluent (POME) biodiesel - biodiesel produced from palm oil industry effluent through various treatment and transesterification process. GF and POME was mixed together at various proportions and separately with fossil diesel (FD) to assess the miscibility and various physical and chemical properties of the blends. Fuel properties such as kinematic viscosity, higher heating value, water content, acid number, density, flash point temperature, CHNO content, sulphur content, ash content, oxidation stability, cetane number and copper corrosion ratings of all the fuels were measured. The properties of GF, POME and various blends were compared with the corresponding properties of the standard FD. Significance of the fuel properties and their expected effects on combustion and exhaust emission characteristics of the IC engine were discussed. Results showed that most properties of both GF and POME biodiesel were comparable to FD. Both GF and POME were miscible with each other, and also separately with the FD. Flash point temperatures of GF and POME biodiesel were 40.7°C and 158.7°C respectively. The flash point temperature of GF was about 36% lower than corresponding FD. The water content in GF and FD were 0.74 (% wt) and 0.01 (% wt) respectively. Acidity values and corrosion ratings of both GF and POME biodiesel were low compared to corresponding value for FD. The study concluded that optimum GF-POME biofuel blends can substitute fossil diesel use in IC engines.

Obtenção de extratos da Opuntia fícus-indica L. Mill e suas aplicações em formulações cosméticas: avaliação in vivo do sensorial e da eficácia hidratante

Opuntia fícus - indica (L.) Mill is a cactacea presents in the Caatinga ecosystem and shows in its chemical c omposition flavonoids, galacturonic acid and sugars. Different hydroglicolic (EHG001 and EHG002) and hydroethanolic subsequently lyophilized (EHE001 and EHE002) extracts were developed. The EHE002 had his preliminary phytochemical composition investigated by thin layer chromatography (TLC) and we observed the predominance of flavonoids. Different formulations were prepared as emulsions with Sodium Polyacrylate (and) Hydrogenated Polydecene (and) Trideceth - 6 (Rapithix® A60), and Polyacrylamide (and) C13 - 14 I soparaffin (and) Laureth - 7 (Sepigel® 305), and gel with Sodium Polyacrylate (Rapithix® A100). The sensorial evaluation was conducted by check - all - that - apply method. There were no significant differences between the scores assigned to the formulations, howe ver, we noted a preference for those formulated with 1,5% of Rapithix® A100 and 3,0% of Sepigel® 305. These and the formulation with 3% Rapithix® A60 were tested for preliminary and accelerated stability. In accelerated stability study, samples were stored at different temperatures for 90 days. Organoleptic characteristics, the pH values and rheological behavior were assessed. T he emulsions formulated with 3,0% of Sepigel® 305 and 1,5% of Rapithix® A60 w ere stable with pseudoplastic and thixotropic behavior . The moisturizing clinical efficacy of the emulsions containing 3,0% of Sepigel® 305 containing 1 and 3% of EHG001 was performed using the capacitance method (Corneometer®) and transepidermal water lost – TEWL evaluation ( Tewameter®). The results showed t hat the formulation with 3% of EHG001 increased the skin moisturizing against the vehicle and the extractor solvent formulation after five hours. The formulations containing 1 and 3% of EHG001 increased skin barrier effect by reducing transepidermal water loss up to four hours after application.

Desenvolvimento e caracterização de nanoemulsões cosméticas contendo extrato de Opuntia ficus-indica L. Mill e avaliação in vivo da eficácia hidratante

Nanoemulsions are emulsified systems, characterized for reduced droplet size (50- 500nm), which the main characteristic are kinect stability and thermodynamic instability. These are promising systems on cosmetic area due to their droplet size that provide different advantages when compared to conventional systems, among others, larger surface area and better permeability. The Opuntia ficus-indica (L.) Mill is a plant cultivated on Caatinga Brazilian biome, which has great socioeconomic importance to region. This plant shows carbohydrates utilized for cosmetic industry as moisturizing active in their chemical composition. The aim of study was to develop, characterize, evaluate stability and moisturizing efficacy of cosmetic nanoemulsions added to Opuntia ficus-indica (L.) Mill extract. Nanoemulsions preparation was made using a low energy method. Different nanoemulsions were formulated varying the ratio of oil, water and surfactant phases beyond xanthan gum (0.5% e 1%) and Opuntia ficus-indica (L.) Mill hydroglycolic extract addition on 1% and 3%. Obtained nanoemulsions were submitted to preliminary and accelerated stability tests. The evaluated parameters monitored were: macroscopic aspect, pH value, droplet size, zeta potential and polydispersion index, during 60 days on different temperatures. Stable formulations were submitted to moisturizing efficacy assessment by capacitance and transepidermal water loss methodologies during 5 hours. Stable samples were white and showed homogeneous and fluid aspect, pH value was inside ideal range (4,5-6,0) to topical application and droplet size under 200nm characterizing these system as nanoemulsions. Developed nanoemulsions did not decrease transepidermal water loss, however increased the water content on stratum corneum, highlighting the nanoemulsions containing 0.5% of xanthan gum and 1% of hydroglycolic extract. This work presents cosmetic moisturizing nanoemulsions composed to vegetal raw material from Brazilian Caatinga with potential to be used on cosmetic area.

John Stuart Mill e o cultivo da individualidade

The development of a human individual was a matter of investigation for many thinkers through the history of philosophy. The meanings that this development has taken were, nevertheless, very diversified, involving moral, political, epistemological, aesthetical and even religious aspects. The main agents in this process of development of human individuality are, on the one hand, each individual, who has to strive to improve himself the most, creating and resorting to the means available to that; on the other hand, the fomentalist State also have to take his part in this process, given that such a State has a direct interest in the development of his own citizens; it has to act in such a way that it can foment new and enhance the old existing means that can be used to accomplish the task of developing the human individuality. The goal of this thesis is to investigate the meaning that such development has acquired for the utilitarian philosopher John Stuart Mill, from his conception of individuality.

Biomechanical modeling of parotid glands morphing in head & neck radiation therapy treatments

Durante i trattamenti radioterapici dei pazienti oncologici testa-collo, le ghiandole parotidee (PGs) possono essere indebitamente irradiate a seguito di modificazioni volumetriche-spaziali inter/intra-frazione causate da fattori quali il dimagrimento, l’esposizione a radiazioni ionizzanti ed il morphing anatomico degli organi coinvolti nelle aree d’irraggiamento. Il presente lavoro svolto presso la struttura di Fisica Medica e di Radioterapia Oncologica dell’A.O.U di Modena, quale parte del progetto di ricerca del Ministero della Salute (MoH2010, GR-2010-2318757) “ Dose warping methods for IGRT and Adaptive RT: dose accumulation based on organ motion and anatomical variations of the patients during radiation therapy treatments ”, sviluppa un modello biomeccanico in grado di rappresentare il processo di deformazione delle PGs, considerandone la geometria, le proprietà elastiche e l'evoluzione durante il ciclo terapeutico. Il modello di deformazione d’organo è stato realizzato attraverso l’utilizzo di un software agli elementi finiti (FEM). Molteplici superfici mesh, rappresentanti la geometria e l’evoluzione delle parotidi durante le sedute di trattamento, sono state create a partire dai contorni dell’organo definiti dal medico radioterapista sull’immagine tomografica di pianificazione e generati automaticamente sulle immagini di setup e re-positioning giornaliere mediante algoritmi di registrazione rigida/deformabile. I constraints anatomici e il campo di forze del modello sono stati definiti sulla base di ipotesi semplificative considerando l’alterazione strutturale (perdita di cellule acinari) e le barriere anatomiche dovute a strutture circostanti. L’analisi delle mesh ha consentito di studiare la dinamica della deformazione e di individuare le regioni maggiormente soggette a cambiamento. Le previsioni di morphing prodotte dal modello proposto potrebbero essere integrate in un treatment planning system per metodiche di Adaptive Radiation Therapy.

Low frequency of cigarette smoking and the risk of head and neck cancer in the INHANCE consortium pooled analysis

Funding • The pooled data coordination team (PBoffetta, MH, YCAL) were supported by National Cancer Institute grant R03CA113157 and by National Institute of Dental and Craniofacial Research grant R03DE016611 • The Milan study (CLV) was supported by the Italian Association for Research on Cancer (Grant no. 10068). • The Aviano study (LDM) was supported by a grant from the Italian Association for Research on Cancer (AIRC), Italian League Against Cancer and Italian Ministry of Research • The Italy Multicenter study (DS) was supported by the Italian Association for Research on Cancer (AIRC), Italian League Against Cancer and Italian Ministry of Research. • The Study from Switzerland (FL) was supported by the Swiss League against Cancer and the Swiss Research against Cancer/Oncosuisse [KFS-700, OCS-1633]. • The central Europe study (PBoffetta, PBrenan, EF, JL, DM, PR, OS, NS-D) was supported by the World Cancer Research Fund and the European Commission INCOCOPERNICUS Program [Contract No. IC15- CT98-0332] • The New York multicentre study (JM) was supported by a grant from National Institute of Health [P01CA068384 K07CA104231]. • The study from the Fred Hutchison Cancer Research Center from Seattle (CC, SMS) was supported by a National Institute of Health grant [R01CA048996, R01DE012609]. • The Iowa study (ES) was supported by National Instituteof Health [NIDCR R01DE011979, NIDCR R01DE013110, FIRCA TW001500] and Veterans Affairs Merit Review Funds. • The North Carolina studies (AFO) were supported by National Institute of Health [R01CA061188], and in part by a grant from the National Institute of Environmental Health Sciences [P30ES010126]. • The Tampa study (PLazarus, JM) was supported by National Institute of Health grants [P01CA068384, K07CA104231, R01DE013158] • The Los Angeles study (Z-F Z, HM) was supported by grants from National Institute of Health [P50CA090388, R01DA011386, R03CA077954, T32CA009142, U01CA096134, R21ES011667] and the Alper Research Program for Environmental Genomics of the UCLA Jonsson Comprehensive Cancer Center. • The Houston study (EMS, GL) was supported by a grant from National Institute of Health [R01ES011740, R01CA100264]. • The Puerto Rico study (RBH, MPP) was supported by a grant from National Institutes of Health (NCI) US and NIDCR intramural programs. • The Latin America study (PBoffetta, PBrenan, MV, LF, MPC, AM, AWD, SK, VW-F) was supported by Fondo para la Investigacion Cientifica y Tecnologica (FONCYT) Argentina, IMIM (Barcelona), Fundaco de Amparo a‘ Pesquisa no Estado de Sao Paulo (FAPESP) [No 01/01768-2], and European Commission [IC18-CT97-0222] • The IARC multicentre study (SF, RH, XC) was supported by Fondo de Investigaciones Sanitarias (FIS) of the Spanish Government [FIS 97/ 0024, FIS 97/0662, BAE 01/5013], International Union Against Cancer (UICC), and Yamagiwa-Yoshida Memorial International Cancer Study Grant. • The Boston study (KKelsey, MMcC) was supported by a grant from National Institute of Health [R01CA078609, R01CA100679]. • The Rome study (SB, GC) was supported by AIRC (Italian Agency for Research on Cancer). • The US multicentre study (BW) was supported by The Intramural Program of the National Cancer Institute, National Institute of Health, United States. • The Sao Paolo study (V W-F) was supported by Fundacao de Ampara a Pesquisa no Estado de Sao Paulo (FAPESP No 10/51168-0) • The MSKCC study (SS, G-P Y) was supported by a grant from National Institute of Health [R01CA051845]. • The Seattle-Leo stud (FV) was supported by a grant from National Institute of Health [R01CA030022] • The western Europe Study (PBoffetta, IH, WA, PLagiou, DS, LS, FM, CH, KKjaerheim, DC, TMc, PT, AA, AZ) was supported by European Community (5th Frame work Programme) grant no QLK1-CT-2001- 00182. • The Germany Heidelberg study (HR) was supported by the grant No. 01GB9702/3 from the German Ministry of Education and Research.

Aspirin and other non-steroidal anti-inflammatory drug prescriptions and survival after the diagnosis of head and neck and oesophageal cancer

Peer reviewed

A randomized trial of specialized versus standard neck physiotherapy in cervical dystonia

We thank: the patients who took part; Monsieur John-Pierre Bleton for training the physiotherapists; Gladys McPherson (Senior IT Manager), Adesoji Adeyemi (programmer) and Diana Collins (data entry) from the Centre for Healthcare Randomised Trials, University of Aberdeen who provided the randomisation and database service; and the funders including The Dystonia Society, the RS Macdonald Charitable Trust, The Sir Halley Stewart Trust, The Foyle Foundation and The Garfield Weston Foundation. The Dystonia Society and other funders had no role in the design, conduct, analysis or writing of the report or the decision to submit the manuscript.

Postoperative analgesic effect, of preoperatively administered dexamethasone, after operative fixation of fractured neck of femur: randomised, double blinded controlled study.

Background: Fractured neck of femur is a common cause of hospital admission in the elderly and usually requires operative fixation. In a variety of clinical settings, preoperative glucocorticoid administration has improved analgesia and decreased opioid consumption. Our objective was to define the postoperative analgesic efficacy of single dose of dexamethasone administered preoperatively in patients undergoing operative fixation of fractured neck of femur. Methods: Institutional ethical approval was granted and written informed consent was obtained from each patient. Patients awaiting for surgery at Cork University Hospital were recruited between July 2009 and August 2012. Participating patients, scheduled for surgery were randomly allocated to one of two groups (Dexamethasone or Placebo). Patients in the dexamethasone group received a single dose of intravenous dexamethasone 0.1 mg kg -1 immediately preoperatively. Patients in the placebo group received the same volume of normal saline. Patients underwent operative fixation of fractured neck of femur using standardised spinal anaesthesia and surgical techniques. The primary outcome was pain scores at rest 6 h after the surgery. Results: Thirty seven patients were recruited and data from thirty patients were analysed. The groups were similar in terms of patient characteristics. Pain scores at rest 6 h after the surgery (the principal outcome) were lesser in the dexamethasone group compared with the placebo group [0.8(1.3) vs. 3.9(2.9), mean(SD) p = 0.0004]. Cumulative morphine consumption 24 h after the surgery was also lesser in the dexamethasone group [7.7(8.3) vs. 15.1(9.4), mean(SD) mg, p = 0.04]. Conclusions: A single dose of intravenous dexamethasone 0.1 mg kg -1 administered before operative fixation of fractured neck of femur improve significantly the early postoperative analgesia. Trial registration: ClinicalTrials.gov identifier: NCT01550146, date of registration: 07/03/2012

AN INVESTIGATION ON ROUTINE FOLLOW-UP CARE FOR HEAD AND NECK CANCER

BACKGROUND: Follow-up care aims to provide surveillance with early detection of recurring cancers and to address treatment complications and other health issues in survivorship. It is assumed that follow-up care fulfills these aims, however little evidence supports routine surveillance detecting curable disease early enough to improve survival. Cancer survivors are a diverse patient population, suggesting that a single follow-up regimen may not meet all patients’ follow-up needs. Little is known about what effective follow-up care should include for head and neck cancer patients in a Canadian setting. Identification of subgroups of patients with specific needs and current practices would allow for hypotheses to be generated for enhancing follow-up care. OBJECTIVES: 1a) To describe the follow-up needs and preferences of head and neck cancer patients, 1b) to identify which patient characteristics predict needs and preferences, 1c) to evaluate how needs and preferences change over time, 2a) to describe follow-up care practices by physician visits and imaging tests, and 2b) to identify factors associated to the delivered follow-up care. METHODS: 1) 175 patients who completed treatment between 2012 and 2013 in Kingston and London, Ontario were recruited to participate in a prospective survey study on patients’ needs and preferences in follow-up care. Bivariate and multivariate analyses were employed to describe patient survey responses and to identify patient characteristics that predicted needs and preferences. 2) A retrospective cohort study of 3975 patients on routine follow-up from 2007 to 2015 was carried out using data linkages across registry and administrative databases to describe follow-up practices in Ontario by visits and tests. Multivariate regression analyses assessed factors related to follow-up care. RESULTS: 1) Patients’ needs and preferences were wide-ranging with several characteristics predicting needs and preferences (ORECOG=2.69 and ORAnxiety=1.13). Needs and preferences declined as patients transitioned into their second year of follow-up (p<0.05). 2) Wide variation in practices was found, with marked differences compared to existing consensus guidelines. Multiple factors were associated with follow-up practices (RRTumor site=0.73 and RRLHIN=1.47). CONCLUSIONS: Patient characteristics can be used to personalize care and guidelines are not informing practice. Future research should evaluate individualized approaches to follow-up care.