Adaptive device with underlying mechanism defined by a programming language

An adaptive device is made up of an underlying mechanism, for instance, an automaton, a grammar, a decision tree, etc., to which is added an adaptive mechanism, responsible for allowing a dynamic modification in the structure of the underlying mechanism. This article aims to investigate if a programming language can be used as an underlying mechanism of an adaptive device, resulting in an adaptive language.

Estabelecimento de pyrenophora avenae Ito & Kurib, em grãos de aveia (Avena sativa L.) em formação sob condições de campo

O aumento da área de cultivo da aveia branca no Brasil, principalmente em plantio direto, tem ocasionado o aumento na intensidade da mancha foliar e do grão causada por Pyrenophora avenae. Por ser um patógeno necrotrófico, é extremamente dependente dos restos culturais da aveia para sobreviver entre uma estação de cultivo e outra. Assim, a suscetibilidade do hospedeiro, a presença de inóculo do patógeno e condições ambientais favoráveis tem sido as principais causas da ocorrência freqüente de epidemias no sul do Brasil. O objetivo deste trabalho foi identificar a fase do desenvolvimento das sementes que é mais suscetível para o estabelecimento do fungo e correlacioná-la com a quantidade de inóculo produzida nas folhas basais mortas. Sob condições de campo, panículas de aveia foram expostas ao inóculo por determinados períodos de tempo desde a sua emergência, em diferentes condições de temperatura e precipitação pluviométrica. As sementes em formação, expostas ao inóculo durante o estágio de grão leitoso e massa mole, apresentaram as maiores incidências do patógeno. A temperatura e a quantidade de chuva do período de observação não influenciaram a porcentagem de sementes infectadas pelo patógeno. No entanto, condições ambientais como temperaturas altas, acumulo de chuvas e ocorrência de outras moléstias, anteciparam a senescência das folhas basais das plantas de aveia, favorecendo uma maior produção de conídios pelo patógeno. O uso de cultivares que ofereçam resistência ou escape das sementes à infecção, a rotação de culturas e a aplicação de fungicidas no momento correto, são algumas medidas que podem ser adotadas para minimizar os prejuízos provocados por esse patógeno.

Medição de deslocamento através de sensores magnetoresistivos aplicada ao movimento mandibular

Neste trabalho é apresentado um método para medição de deslocamentos sem contato, utilizando sensores magnetoresistivos, os quais são sensibilizados pela variação do campo magnético produzido por um imã permanente em deslocamento no espaço. Os sensores magnetoresistivos possuem, internamente, uma ponte de Wheathestone, onde a resistência varia conforme varia o campo magnético, de modo que o circuito mais indicado para este caso é um amplificador e um filtro para cada sensor. O principal objetivo do trabalho é a obtenção de uma técnica para medir deslocamentos sem contato, e estender os resultados para medida de movimentos mandibulares. A montagem consiste de duas placas de celeron, distantes 30mm uma da outra e unidas por parafusos de polietileno. Em cada uma destas placas foram dispostos quatro sensores, num total de oito, sendo que para cada um deles existe um circuito de amplificação e filtragem do sinal de saída. Sob uma chapa de alumínio foi fixado este equipamento e uma mesa de calibração em 3D, a qual, após a obtenção da matriz de calibração, foi substituída por um emulador de movimento mandibular. Os parâmetros do modelo foram estimados através do método dos mínimos quadrados com auxílio do software Matlab, Release 12. Este software também foi utilizado para o sistema de aquisição de dados durante a realização dos experimentos. A imprecisão dos resultados obtidos na determinação dos deslocamentos, está na ordem de décimos de milímetros. O trabalho apresenta, também, o mapeamento do campo magnético do magneto utilizado nos experimentos através do software FEM2000 – Método de elementos finitos aplicado ao eletromagnetismo.

Banning information as a redistributive device

In this paper we analyze the optimality of allowing firms to observe signals of workers’ characteristics in an optimal taxation framework. We show that it is always optimal to prohibit signals that disclose information about differences in the intrinsic productivities of workers like mandatory health exams and IQ tests, for example. On the other hand, it is never optimal to forbid signals that reveal information about the comparative advantages of workers like their specialization and profession. When signals are mixed (they disclose both types of information), there is a trade-off between efficiency and equity. It is optimal to prohibit signals with sufficiently low comparative advantage content.

Estudo comparativo em radiografias panorâmicas do grau de inclinação dos terceiros molares inferiores e da direção de crescimento mandibular segundo os traçados de Altonen, Haavikko, Mattila e de Puricelli

Foi realizado um estudo comparativo entre os resultados das medidas obtidas segundo dois traçados (Altonen, Haavikko e Mattila x Puricelli), efetuadas sobre radiografias panorâmicas, verificando-se a presença ou ausência de compatibilidade entre os mesmos. Avaliou-se também a direção de crescimento mandibular (vertical ou sagital) na amostra composta por pacientes com maloclusão de Classe II esquelética e ainda a existência de uma relação desta direção com o grau de inclinação dos terceiros molares. Desta forma, as seguintes medidas foram comparadas: ângulo β de Altonen, Haavikko e Mattila correspondente ao γ de Puricelli, o qual indicou o relacionamento dos terceiros molares inferiores em relação aos segundos molares; ângulo γA de Altonen, Haavikko e Mattila correspondente ao M2L3 de Puricelli, o qual indicou o ângulo de inclinação do segundo molar com uma linha de base e ângulo α de Altonen, Haavikko e Mattila correspondente ao Pc-Go-B de Puricelli, proporcionando o ângulo mandibular. Baseando-se nos resultados obtidos, apresentados e discutidos no presente trabalho e de acordo com a metodologia estudada, pode-se concluir que: 1) Os traçados diferem entre si, com relação a todas as medidas. Entretanto, apresentam uma correlação positiva para todas as medidas estudadas. 2) Há um crescimento mandibular predominantemente vertical (condilar) segundo o traçado proposto por Puricelli. 3) O grau de inclinação do terceiro molar não se correlaciona com a direção do crescimento mandibular indicada através do ângulo mandibular em ambos os traçados. Desta forma, é imprescindível que ao se compararem os resultados de diferentes estudos analisem-se apenas aqueles que utilizaram o mesmo traçado.

Remote presence: supporting deictic gestures through a handheld multi-touch device

This thesis argues on the possibility of supporting deictic gestures through handheld multi-touch devices in remote presentation scenarios. In [1], Clark distinguishes indicative techniques of placing-for and directing-to, where placing-for refers to placing a referent into the addressee’s attention, and directing-to refers to directing the addressee’s attention towards a referent. Keynote, PowerPoint, FuzeMeeting and others support placing-for efficiently with slide transitions, and animations, but support limited to none directing-to. The traditional “pointing feature” present in some presentation tools comes as a virtual laser pointer or mouse cursor. [12, 13] have shown that the mouse cursor and laser pointer offer very little informational expressiveness and do not do justice to human communicative gestures. In this project, a prototype application was implemented for the iPad in order to explore, develop, and test the concept of pointing in remote presentations. The prototype offers visualizing and navigating the slides as well as “pointing” and zooming. To further investigate the problem and possible solutions, a theoretical framework was designed representing the relationships between the presenter’s intention and gesture and the resulting visual effect (cursor) that enables the audience members to interpret the meaning of the effect and the presenter’s intention. Two studies were performed to investigate people’s appreciation of different ways of presenting remotely. An initial qualitative study was performed at The Hague, followed by an online quantitative user experiment. The results indicate that subjects found pointing to be helpful in understanding and concentrating, while the detached video feed of the presenter was considered to be distracting. The positive qualities of having the video feed were the emotion and social presence that it adds to the presentations. For a number of subjects, pointing displayed some of the same social and personal qualities [2] that video affords, while less intensified. The combination of pointing and video proved to be successful with 10-out-of-19 subjects scoring it the highest while pointing example came at a close 8-out-of-19. Video was the least preferred with only one subject preferring it. We suggest that the research performed here could provide a basis for future research and possibly be applied in a variety of distributed collaborative settings.

Effect of timing of estradiol benzoate administration upon synchronization of ovulation in suckling Nelore cows (Bos indicus) treated with a progesterone-releasing intravaginal device

The present study investigated how the timing of the administration of estradiol benzoate (EB) impacted the synchronization of ovulation in fixed-time artificial insemination protocols of cattle. To accomplish this, two experiments were conducted, with EB injection occurring at different times: at withdrawal of the progesterone-releasing (N) intravaginal device or 24 h later. The effectiveness of these times was compared by examining ovarian follicular dynamics (Experiment 1, n = 30) and conception rates (Experiment 2, n = 504). In Experiment 1, follicular dynamics was performed in 30 Nelore cows (Bos indicus) allocated into two groups. on a random day of the estrous cycle (Day 0), both groups received 2 mg of EB i.m. and a P4-releasing intravaginal device, which was removed on Day 8, when 400 IU of eCG and 150 mu g of PGF were administered. The control group (G-EB9; n = 15) received 1 mg of EB on Day 9, while Group EB8 (G-EB8; n = 15) received the same dose a day earlier. Ovarian ultrasonographic evaluations were performed every 8 h after device removal until ovulation. The timing of EB administration (Day 8 compared with Day 9) did affect the interval between P4 device removal to ovulation (59.4 +/- 2.0 h compared with 69.3 +/- 1.7 h) and maximum diameter of dominant (1.54 +/- 0.06 a cm compared with 1.71 +/- 0.05 b cm, P = 0.03) and ovulatory (1.46 +/- 0.05 a cm compared with 1.58 +/- 0.04 b cm, P < 0.01) follicles. In Experiment 2,504 suckling cows received the same treatment described in Experiment 1, but insemination was performed as follows: Group EB8-AI48h (G-EB8-AI48h; n = 119) and Group EB8-AI54h (G-EB8-AI54h; n = 134) received 1 mg of EB on Day 8 and FrAI was performed, respectively, 48 or 54 h after P4 device removal. Group EB9-AI48h (G-EB9-AI48h; n = 126) and Group EB9-AI54h (G-EB9-AI54h n = 125) received the same treatments and underwent the same FTAI protocols as G-EB8-AI48h and G-EB8-AI54h, respectively; however, EB was administered on Day 9. Conception rates were greater (P < 0.05) in G-EB9-AI54h 163.2% (79/125) a], G-EB9-AI48h [58.7% (74/126) a] and G-EB8-AI48h [58.8% (70/119) a] than in G-EB8-AI54h [34.3% (46/134) b]. We concluded that when EB administration occurred at device withdrawal (D8), the interval to ovulation shortened and dominant and ovulatory follicle diameters decreased. Furthermore, when EB treatment was performed 24 h after device removal, FTAI conducted at either 48 or 54 h resulted in similar conception rates. However, EB treatment on the same day as device withdrawal resulted in a lesser conception rate when FTAI was conducted 54 h after device removal. (C) 2007 Elsevier B.V. All rights reserved.

Molecular architecture and electrical properties in evaporated films of cobalt phthalocyanine

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Observation of persistent photoconductivity in vanadyl phthalocyanine

Persistent photoconductivity (PPC) in vanadyl phthalocyanine (VOPc) organic light-emitting diodes was investigated using photoconductive time response, photocurrent-voltage characteristics and charge extraction in linearly increasing voltage (CELIV) measurements. The experiments were performed in phase 1 (amorphous) and in phase 2 (crystalline) samples obtained by the physical vapour deposition (PVD) technique over ITO/glass electrodes with an Al covering electrode. The results indicated a photoconductivity with a long decay time in phase 1 VOPc described by a stretched exponential relaxation. The device showed a rectifying behaviour and the mobility of holes was measured by CELIV, following a dispersive model. In crystalline samples the PPC effect was not observed and the dominant mechanism of transport of holes was hopping in a Gaussian density of states.

Effect of abutment's height and framework alloy on the load distribution of mandibular cantilevered implant-supported prosthesis

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effect of cantilever length and framework alloy on the stress distribution of mandibular-cantilevered implant-supported prostheses

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

A 2kW interleaved ZCS-FM boost rectifier digitally controlled by FPGA device

This paper presents a 2kW single-phase high power factor boost rectifier with four cells in interleave connection, operating in critical conduction mode, and employing a soft-switching technique, controlled by Field Programmable Gate Array (FPGA). The soft-switching technique Is based on zero-current-switching (ZCS) cells, providing ZC (zero-current) turn-on and ZCZV (zero-current-zero-voltage) turn-off for the active switches, and ZV (zero-voltage) turn-on and ZC (zero-current) turn-off for the boost diodes. The disadvantages related 'to reverse recovery effects of boost diodes operated in continuous conduction mode (additional losses, and electromagnetic interference (EMI) problems) are minimized, due to the operation in critical conduction mode. In addition, due to the Interleaving technique, the rectifer's features include the reduction in the input current ripple, the reduction in the output voltage ripple, the use of low stress devices, low volume for the EMI input filter, high input power factor (PF), and low total harmonic distortion (THD) In the input current, in compliance with the TEC61000-3-2 standards. The digital controller has been developed using a hardware description language (VHDL) and implemented using a XC2S200E-SpartanII-E/Xilinx FPGA device, performing a true critical conduction operation mode for four interleaved cells, and a closed-loop to provide the output voltage regulation, like as a pre-regulator rectifier. Experimental results are presented for a 2kW implemented prototype with four interleaved cells, 400V nominal output voltage and 220V(rms) nominal input voltage, in order to verify the feasibility and performance of the proposed digital control through the use of a FPGA device.

On the performance of a dual-mode non-linear vibration energy harvesting device

The research trend for harvesting energy from the ambient vibration sources has moved from using a linear resonant generator to a non-linear generator in order to improve on the performance of a linear generator; for example, the relatively small bandwidth, intolerance to mistune and the suitability of the device for low-frequency applications. This article presents experimental results to illustrate the dynamic behaviour of a dual-mode non-linear energy-harvesting device operating in hardening and bi-stable modes under harmonic excitation. The device is able to change from one mode to another by altering the negative magnetic stiffness by adjusting the separation gap between the magnets and the iron core. Results for the device operating in both modes are presented. They show that there is a larger bandwidth for the device operating in the hardening mode compared to the equivalent linear device. However, the maximum power transfer theory is less applicable for the hardening mode due to occurrence of the maximum power at different frequencies, which depends on the non-linearity and the damping in the system. The results for the bi-stable mode show that the device is insensitive to a range of excitation frequencies depending upon the input level, damping and non-linearity.