Occurrence of Arthroderma benhamiae Genotype in Japan.

In this study, we epidemiologically investigated on clinical isolates of Arthroderma benhamiae from humans and animals in Japan by internal transcribed spacer (ITS) region sequence analysis and mating type (MAT)-specific PCR. Seven of 8 A. benhamiae isolates from a human, rabbits and guinea pigs were identified as group I (white phenotype) by morphological characters and ITS region sequence analysis. One strain isolated from a degus (Octodon degus) produced colonies with few irregular folds and yellow velvety mycelium without macro- and microconidia. This strain resembled to group II (yellow phenotype) strain. ITS sequence analysis was also 100 % identical to that of group II. MAT-specific PCR indicated that 6 of these 7 isolates of group I contained an alpha-box gene and that one strain contained high-mobility-group (HMG) gene. One strain of group II was revealed to have an alpha-box gene and no HMG gene. To our knowledge, it is the first A. benhamiae isolate of group II found in Japan. The A. benhamiae may be more widespread in worldwide than our surpassing what is common or usual or expected.

Applying precision feeding techniques in growing-finishing pig operations

The high cost of feed ingredients, the use of non-renewable sources of phosphate and the dramatic increase in the environmental load resulting from the excessive land application of manure are major challenges for the livestock industry. Precision feeding is proposed as an essential approach to improve the utilization of dietary nitrogen, phosphorus and other nutrients and thus reduce feeding costs and nutrient excretion. Precision feeding requires accurate knowledge of the nutritional value of feedstuffs and animal nutrient requirements, the formulation of diets in accordance with environmental constraints, and the gradual adjustment of the dietary nutrient supply to match the requirements of the animals. After the nutritional potential of feed ingredients has been precisely determined and has been improved by the addition of enzymes (e.g. phytases) or feed treatments, the addition of environmental objectives to the traditional feed formulation algorithms can promote the sustainability of the swine industry by reducing nutrient excretion in swine operations with small increases in feeding costs. Increasing the number of feeding phases can also contribute to significant reductions in nutrient excretion and feeding costs. However, the use of precision feeding techniques in which pigs are fed individually with daily tailored diets can further improve the efficiency with which pigs utilize dietary nutrients. Precision feeding involves the use of feeding techniques that allow the provision of the right amount of feed with the right composition at the right time to each pig in the herd. Using this approach, it has been estimated that feeding costs can be reduced by more than 4.6%, and nitrogen and phosphorus excretion can both be reduced by more than 38%. Moreover, the integration of precision feeding techniques into large-group production systems can provide real-time off-farm monitoring of feed and animals for optimal slaughter and production strategies, thus improving the environmental sustainability of pork production, animal well-being and meat-product quality.

Diodilaserin käytön edellytykset ohutlevyjen hitsauksessa

Diplomityössä tutkitaan diodilaserhitsausta mahdollisena teollisuuden menetelmänä ja menetelmän vaatimuksia hitsattaessa ohutlevyjä. Työssä tutkittavat materiaalit ovat kylmävalssattu teräs ja ruostumaton teräs sekä liitosmuotoina päittäis-, laippa- ja päällekkäisliitos. Materiaalivahvuudet ovat 0,50 mm:stä 1,50 mm:iin. Työn tavoitteena on määrittää näille kyseisille materiaaleille ja liitosmuodoille hitsausnopeus levynvahvuuden funktiona. Lisäksi käsitellään diodilaserin rakennetta, säteen muodostusta, säteen muokkaamista, säteen analysointia ja säteen turvallisuuteen liittyviä asioita. Suoritetaan vertailua käytössä oleviin muihin lasertyöstömenetelmiin konepajoissa ja tehdään arvio mahdollisen diodilaserinvestoinnin kannattavuudesta. Diodilaserhitsauskokeissa käytettiin Hämeen ammattikorkeakoulun Riihimäen yksikön 1 kW:n tehoista diodilaseria. Koekappaleet leikattiin suuntaisleikkurilla. Osalle hitsatuista kappaleista tehtiin poikittaiset vetokokeet ja mitattiin mikrokovuudet. Virheitä tutkittiin silmämääräisesti sekä radiografisella kuvauksella. Kaikille tutkituille liitoksille, materiaaleille ja vahvuuksille saatiin määriteltyä hitsausnopeudet. Tehtyjen testien perusteella suuntaisleikkurin käyttö on mahdollista. Lisäksi havaittiin suojakaasun käytön myötä, että kirkkaan sulan aiheuttama heijastavuuden kasvu edellyttää hitsausnopeuden pienentämistä.

Fusion weld metal solidification:Continuum from weld interface to centerline

We present a brief résumé of the history of solidification research and key factors affecting the solidification of fusion welds. There is a general agreement of the basic solidification theory, albeit differing - even confusing - nomenclatures do exist, and Cases 2 and 3 (the Chalmers' basic boundary conditions for solidification, categorized by Savage as Cases) are variably emphasized. Model Frame, a tool helping to model the continuum of fusion weld solidification from start to end, is proposed. It incorporates the general solidification models, of which the pertinent ones are selected for the actual modeling. The basic models are the main solidification Cases 1…4. These discrete Cases are joined with Sub-Cases: models of Pfann, Flemings and others, bringing needed Sub-Case variables into the model. Model Frame depicts a grain growing from the weld interface to its centerline. Besides modeling, the Model Frame supports education and academic debate. The new mathematical modeling techniques will extend its use into multi-dimensional modeling, introducing new variables and increasing the modeling accuracy. We propose a model: melting/solidification-model (M/S-model) - predicting the solute profile at the start of the solidification of a fusion weld. This Case 3-based Sub-Case takes into account the melting stage, the solute back-diffusion in the solid, and the growth rate acceleration typical to fusion welds. We propose - based on works of Rutter & Chalmers, David & Vitek and our experimental results on copper - that NEGS-EGS-transition is not associated only with cellular-dendritic-transition. Solidification is studied experimentally on pure and doped copper with welding speed range from 0 to 200 cm/min, with one test at 3000 cm/min. Found were only planar and cellular structures, no dendrites - columnar or equiaxed. Cell sub structures: rows of cubic elements we call "cubelettes", "cell-bands" and "micro-cells", as well as an anomalous crack morphology "crack-eye", were detected, as well as microscopic hot crack nucleus we call "grain-lag cracks", caused by a grain slightly lagging behind its neighbors in arrival to the weld centerline. Varestraint test and R-test revealed a change of crack morphologies from centerline cracks to grainand cell boundary cracks with an increasing welding speed. High speed made the cracks invisible to bare eye and hardly detectable with light microscope, while electron microscope often revealed networks of fine micro-cracks.

Projeto e construção de um bioreator para síntese orgânica assimétrica catalisada por saccharomyces cerevisiae (fermento biológico de padaria)

A model for the construction of a simple and cheap apparatus to be used as bioreactor for reactions catalyzed by baker's yeast (Saccharomyces cerevisiae) is described. The bioconversion and separation of cells from products and residual substrates are obtained at the same time. The reactions carried out in this type of reactor are faster than those catalyzed by immobilized cells. Yeast cells can be cultivated in this bioreactor operating with cell recycling at appropriated conditions using glucose and other nutrients.

Ecología química en el bentos antártico

El estudio de las interacciones entre los organismos mediadas por sustancias químicas, lo que se denomina ecología química, nos da información sobre la biología de las especies implicadas, el funcionamiento de la comunidad en que viven y nos puede proporcionar además el conocimiento de nuevas sustancias que pueden ser útiles para el ser humano. En el marco de nuestros estudios sobre la ecología química de los invertebrados antárticos, en el proyecto ECOQUIM (2003-2006) se recolectaron numerosas muestras biológicas a partir de las cuales se obtuvieron extractos y sustancias naturales de invertebrados antárticos. En el proyecto ACTIQUIM (2007-actualidad), se ha evaluado el papel ecológico de estos extractos y sustancias naturales mediante experimentos de ecología química in situ (repelencia, defensa ante distintos tipos de macro y micro-depredadores, toxicidad, citotoxicidad y actividad antifouling) y también se ha analizado la actividad antitumoral de algunos compuestos obtenidos recientemente. Nuestros resultados demuestran, entre otras cuestiones, que las defensas químicas en los organismos antárticos son elevadas en las esponjas, los cnidarios, los tunicados, los briozoos, los equinodermos y los moluscos y que por lo tanto, estos grupos pueden ser una fuente rica en metabolitos secundarios con bioactividad, tanto a nivel ecológico como farmacológico.

First report of the pantropical species Diploschistes rampoddensis from Europe

The lichen species Diploschistes rampoddensis, previously known only from a few localities in tropical and subtropical Asia and Oceania, is reported here for the first time in Europe. A detailed description, including macro- and microscopic characters, and comparisons with closely related taxa are also provided. Molecular analyses based on the nrITS were used to confirm this new record for the European lichen biota.

Obtenció d'estruvita a partir de la fracció líquida digerida de purins de vaca

Actualment a Catalunya existeixen zones amb importants limitacions per l’aplicació de purins al sòl, pel que és imprescindible trobar alternatives de gestió i tractament que permetin l’aprofitament adequat dels recursos continguts a les dejeccions ramaderes sense afectar el medi. La digestió anaeròbia és una de les tècniques utilitzades en el tractament de les dejeccions ramaderes. L’efluent líquid que s’obté d’aquest tractament no modifica el contingut de nitrogen i fòsfor i per tant ha de ser gestionat correctament. L’objectiu general d’aquest projecte és avaluar la precipitació d’estruvita (sal de magnesi, amoni i fosfat) com una alternativa de gestió de l’efluent líquid d’una planta de digestió anaeròbia i compostatge que tracta dejeccions ramaderes conjuntament amb altres residus orgànics. S’han avaluat els efectes dels diferents paràmetres operacionals en la formació d’estruvita (pH, temperatura, velocitat d’agitació, alcalinitat), mitjançant assaigs en discontinu amb solució sintètica. A continuació s’ha procedit a obtenir estruvita a partir de la fracció líquida digerida de purí (FLD), en assaigs en discontinu per estudiar l’efecte del contingut de matèria orgànica i sòlids Totals (ST), així com el contingut en fosfats i el pH de reacció. Finalment, s’han optimitzat els paràmetres de procés en continu, mitjançant la posada en marxa d’un reactor a escala de laboratori i estudi de l’efecte de la velocitat d’agitació i de la introducció del stripping de CO2, tant amb solució sintètica com amb la fracció líquida digerida del purí. Dels resultats obtinguts es pot concloure que els factors que tenen una major influència en el procés d’obtenció d’estruvita són el pH (el pH òptim es situa al voltant de 9), i la presència de matèria orgànica i sòlids ens suspensió, que interfereix de forma quantitativa i qualitativa en la formació de l’estruvita. En el procés en continu s’ha aconseguit reduccions d’un 84% i 98% d’amoni i fòsfor respectivament, obtenintse estruvita que pot ser utilitzada com a fertilitzant d’alliberació lenta. Es pot concloure que la precipitació d’estruvita és una bona alternativa per millorar la gestió de les dejeccions ramaderes alhora que permet recuperar nutrients i tancar cicles. La combinació amb un tractament previ que elimini la matèria orgànica, com podria ser la digestió anaeròbia, i una separació de fases, per eliminar els sòlids en suspensió, es presenta com una configuració amb molts avantatges.

Análise direta de sólidos por espectrometria de absorção atômica com atomização em forno de grafite: uma revisão

This is a review of direct analysis using solid sampling graphite furnace atomic absorption spectrometry. Greater emphasis is dedicated to sample preparation, sample homogeneity, calibration and its application to microanalysis and micro-homogeneity studies. The main advantages and some difficulties related to the applicability of this technique are discussed. A literature search on the application of solid sampling graphite furnace atomic absorption spectrometry in trace element determination in many kinds of samples, including biological, clinical, technological and environmental ones, is also presented.

Aproveitamento sustentável de biomassa e de recursos naturais na inovação química

Increased production of biomass is currently the only immediately accessible alternative for large-scale carbon sequestration and it can produce large amounts of food, fuel and raw materials for the chemical industry that can in turn growingly replace oil as a source of organic building blocks and also of hydrogen and sulfur. Development of processes for biomass and abundant minerals transformation into chemical raw materials should now benefit from large inputs from nanotechnologies, biotechnologies, information and micro-reactor technologies. Success in R&D&Innovation along this line can yield new products and processes needed to perform desirable functions within a sustainable development paradigm.

Spatial variability of leaf nutrient contents in a drip irrigated citrus orchard

This study aimed to evaluate the spatial variability of leaf content of macro and micronutrients. The citrus plants orchard with 5 years of age, planted at regular intervals of 8 x 7 m, was managed under drip irrigation. Leaf samples were collected from each plant to be analyzed in the laboratory. Data were analyzed using the software R, version 2.5.1 Copyright (C) 2007, along with geostatistics package GeoR. All contents of macro and micronutrients studied were adjusted to normal distribution and showed spatial dependence.The best-fit models, based on the likelihood, for the macro and micronutrients were the spherical and matern. It is suggest for the macronutrients nitrogen, phosphorus, potassium, calcium, magnesium and sulfur the minimum distances between samples of 37; 58; 29; 63; 46 and 15 m respectively, while for the micronutrients boron, copper, iron, manganese and zinc, the distances suggests are 29; 9; 113; 35 and 14 m, respectively.

Initial development of two eucalyptus hybrid submitted to irrigation

The eucalyptus offers several advantages compared to other forestry species and, by using the irrigation can increase productivity and decrease production time. The objective of the present study was to evaluate two hybrid eucalyptus (Grancam and Urograndis), no irrigation, dripping and micro sprinkler irrigated at 90, 120, 150 and 180 days after transplanting (DAT). The experiment was conducted at the experimental irrigation area in the State University of Mato Grosso do Sul, in the municipality of Aquidauna - State of MS, Brazil. The experimental design was randomized blocks, split plot with four blocks and two replications within each block, and the plots were composed by irrigation treatments (dripping, micro sprinkler irrigate and dry) and the subplots the hybrids (Grancam and Urograndis).The total area of the experiment had 3 hectares, where each plot consisted of 1 ha. It was evaluated plant height, stem diameter and canopy, stem basal area, the relationship between height and stem diameter, the relationship between height and canopy diameter and stem volume. Data were subjected to analysis of variance and compared by Tukey test at 5% probability. Irrigation systems and dripping sprinkle provide greater plant height, stem diameter, canopy diameter, stem basal area and stem volume.

Kirkkaasta sameaan : Meren kuormitus ja tila Saaristomerellä ja Ahvenanmaalla

Tässä raportissa tarkastellaan Saaristomeren ja Ahvenmaan merialueen kuormitusta ja tilaa ja niissä viime vuosikymmeninä tapahtuneita muutoksia vuosiin 2008 ja 2009 saakka. Pääpaino on ravinnekuormituksessa ja veden laadussa, mutta mukana on taustatietoa ja muun muassa katsaus kalakannoista. Saaristomeren ja Ahvenanmaan merialueen tila on heikentynyt huomattavasti viimeisten vuosikymmenten aikana. Erityisesti fosforin ja a-klorofyllin määrät ovat kasvaneet ja näkösyvyys pienenentynyt. Viimeisen kymmenen vuoden aikana pintaveden fosforipitoisuuden kasvu on laantunut suurimmassa osassa aluetta, mutta pohjanläheisessä vesikerroksessa ja talvella fosforipitoisuus on jatkanut kasvuaan monin paikoin viime vuosiin asti. Myös a-klorofyllin määrä on lisääntynyt ulko- ja välisaaristossa 2000-luvullakin. Viime vuosina klorofyllipitoisuuden kasvu on kuitenkin laantunut tai pitoisuus laskenut varsinkin rannikonläheisissä vesissä. Merialueen suurin paikallinen ravinnekuormittaja on maatalous, mutta varsinkin typpeä tulee runsaasti myös ilmalaskeumana. Sisäinen kuormitus ja virtausten mukana Suomenlahdelta ja muualta Itämereltä tulevat ravinteet heikentävät niin ikään merialueen tilaa. Muita ravinnelähteitä ovat mm. haja-asutus, jätevedenpuhdistamot ja kalankasvatus. Ahvenanmaan merialueelle ravinteita tulee enemmän muualta kuin Ahvenanmaalta. Hajakuormituksessa on tapahtunut viime vuosikymmeninä selviä vuodenaikaisia muutoksia. Vuosina 1990 – 2009 jokien mereen tuoma ravinne- ja kiintoainekuormitus on ollut talvisin ja syksyisin selvästi suurempaa kuin vuosina 1970 – 1989. Talviaikaisen kuormituksen lisääntyminen johtuu aiempaa lauhemmista talvista, ja antaa viitteitä ilmastonmuutoksen mukanaan tuomista muutoksista. Vaikka Saaristomeren ja Ahvenanmaan merialueen tilassa on ollut viime aikoina nähtävissä myönteisiäkin merkkejä, on niiden tila edelleen huolestuttava. Ainoa keino merialueen tilan parantamiseksi on kuormituksen huomattava vähentäminen. Vähentäminen koskee niin paikallisia ravinnelähteitä, erityisesti maataloutta, kuin muualta Itämereltä virtausten mukana tulevia ravinteita ja ilmalaskeumaa.

Pythiosis in sheep from Paraná, southern Brazil

Abstract: This paper reports pythiosis in a sheep from southwestern Paraná, Brazil, confirmed by indirect ELISA (Enzime-Linked Immunosorbent Assay) and immunohistochemistry, as well as it describes the macro and microscopic injuries, in order to understand the pathogenicity. A 4-year-old ewe from a flock of 30 Santa Inês sheep, raised semi-extensively with access to a weir, showed cachexia, bilateral enlargement in nasal region, a serous and bloody secretion with a fetid odor from its nose and swollen submandibular and retropharyngeal lymph nodes. Blood collection was performed trough jugular vein puncture in order to make complete blood cell count (CBC) and to obtain serum for the subsequent serological examination. As the hematological counts were within the normal range for sheep, the animal was euthanized and submitted to necropsy. Indirect ELISA resulted positive for pythiosis. Necropsy revealed necrosis of the hard palate with a diameter of 3.5cm and extending up to the nasal cavity, forming a fistula. Submandibular and retropharyngeal lymph nodes were enlarged and edematous on section. Microscopic findings for submandibular and retropharyngeal lymph nodes consisted in moderate infiltration of eosinophils mainly in the subcapsular sinus, characterizing reactive eosinophilic lymphadenitis. The nasal cavity revealed rhinitis and oral cavity stomatitis with necro-eosinophilic and pronounced multifocal granulomatous infiltration and presence of hyphae. Hyphae found in palate and nasal cavity were positive for Pythium insidiosum by Grocott's method and immunohistochemistry, the last one considered to be confirmatory for the pathogen diagnostic. This report has an important epidemiological aspect, as it is the first case of pythiosis in sheep confirmed by serology in South Brazil and an alert of possible infection by the pathogen in floodplains.

Physiologic parameters in female Red-billed curassows (Crax blumenbachii) in rehabilitation

Abstract: The present paper reports blood gas analysis, hematologic and micro bacteriologic information on four female Red-billed curassows, rescued from illegal wild animal trading, that were undergoing habilitation for reintroduction into the wild through Projeto Centrofauna/Botucatu-SP. There is a lack of physiological data on this species, endemic to the region of Atlantic Forest (Mata Atlântica), now under threat of extinction. This lack of information makes the clinical evaluation of these birds very difficult and has a direct and adverse effect on any of these birds received for medical treatment in hospitals, veterinary clinics and centers for research and conservation, as well as in reintroduction centers.