Design and optimization of FinFETs for ultra-low-voltage analog applications

In this paper, we analyze the enormous potential of engineering source/drain extension (SDE) regions in FinFETs for ultra-low-voltage (ULV) analog applications. SDE region design can simultaneously improve two key analog figures of merit (FOM)-intrinsic de gain (A(vo)) and cutoff frequency (f(T)) for 60 and 30 nm FinFETs operated at low drive current (J(ds) = 5 mu A/mu m). The improved Avo and fT are nearly twice compared to those of devices with abrupt SDE regions. The influence of the SDE region profile and its impact on analog FOM is extensively analyzed. Results show that SDE region optimization provides an additional degree of freedom apart from device parameters (fin width and aspect ratio) to design future nanoscale analog devices. The results are analyzed in terms of spacer-to-straggle ratio a new design parameter for SDE engineered devices. This paper provides new opportunities for realizing future ULV/low-power analog design with FinFETs.

Strasheela: Design and usage of a music composition environment based on the Oz programming model

Strasheela provides a means for the composer to create a symbolic score by formally describing it in a rule-based way. The environment defines a rich music representation for complex polyphonic scores. Strasheela enables the user to define expressive compositional rules and then to apply them to the score. Compositional rules can restrict many aspects of the music - including the rhythmic structure, the melodic structure and the harmonic structure - by constraining the parameters (e.g. duration or pitch) of musical events according to some numerical or logical relation. Strasheela combines this expressivity with efficient search strategies.

The design and performance of a 2.5-GHz telecommand link for wireless biomedical monitoring

This paper details the implementation and operational performance of a minimum-power 2.45-GHz pulse receiver and a companion on-off keyed transmitter for use in a semi-active duplex RF biomedical transponder. A 50-Ohm microstrip stub-matched zero-bias diode detector forms the heart of a body-worn receiver that has a CMOS baseband amplifier consuming 20 microamps from +3 V and achieves a tangential sensitivity of -53 dBm. The base transmitter generates 0.5 W of peak RF output power into 50 Ohms. Both linear and right-hand circularly polarized Tx-Rx antenna sets were employed in system reliability trials carried out in a hospital Coronary Care Unit, For transmitting antenna heights between 0.3 and 2.2 m above floor level, transponder interrogations were 95% reliable within the 67-m-sq area of the ward, falling to an average of 46 % in the surrounding rooms and corridors. Overall, the circular antenna set gave the higher reliability and lower propagation power decay index.

Design and measurement of reconfigurable millileter wave reflectarray cells with nematic liquid crystal

Numerical simulations are used to study the electromagnetic scattering from phase agile microstrip reflectarray cells which exploit the voltage controlled dielectric anisotropy property of nematic state liquid crystals (LC). In the computer model two arrays of equal size elements constructed on a 15?m thick tuneable LC layer were designed to operate at centre frequencies of 102 GHz and 130 GHz. Micromachining processes based on the metallization of quartz/silicon wafers and an industry compatible LCD packaging technique were employed to fabricate the grounded periodic structures. The loss and phase of the reflected signals were measured using a quasi-optical test bench with the reflectarray cells inserted at the beam waist of the imaged Gaussian beam, thus eliminating some of the major problems associated with traditional free-space characterisation at these frequencies. By applying a low frequency AC bias voltage of 10 V, a 165o phase shift with a loss 4.5 dB-6.4 dB at 102 GHz and 130o phase shift with a loss variation between 4.3 dB – 7 dB at 130 GHz was obtained. The experimental results are shown to be in close agreement with the computer model.

Efficient analysis, design, and filter applications of EBG waveguide with periodic resonant loads

An efficient analysis and design of an electromagnetic-bandgap (EBG) waveguide with resonant loads is presented. Equivalent-circuit analysis is employed to demonstrate the differences between EBG waveguides with resonant and nonresonant loadings. As a result of the resonance, transmission zeros at finite frequencies emerge. The concept is demonstrated in E-plane waveguides. A generic fast and efficient formulation is presented, which starts from the generalized scattering matrix of the unit cell and derives the dispersion properties of the infinite structure. Both real and imaginary parts of the propagation constant are derived and discussed. The Floquet wavelength and impedance are also presented. The theoretical results are validated by comparison with simulations of a finite structure and experimental results. The application of the proposed EBG waveguide in the suppression of the spurious passband of a conventional E-plane filter is presented by experiment.

Design and implementation of a field programmable CRC circuit architecture

The design and implementation of a programmable cyclic redundancy check (CRC) computation circuit architecture, suitable for deployment in network related system-on-chips (SoCs) is presented. The architecture has been designed to be field reprogrammable so that it is fully flexible in terms of the polynomial deployed and the input port width. The circuit includes an embedded configuration controller that has a low reconfiguration time and hardware cost. The circuit has been synthesised and mapped to 130-nm UMC standard cell [application-specific integrated circuit (ASIC)] technology and is capable of supporting line speeds of 5 Gb/s. © 2006 IEEE.

Multisubstrate adduct inhibitors: Drug design and biological tools

In drug discovery, different methods exist to create new inhibitors possessing satisfactory biological activity. The multisubstrate adduct inhibitor (MAI) approach is one of these methods, which consists of a covalent combination between analogs of the substrate and the cofactor or of the multiple substrates used by the target enzyme. Adopted as the first line of investigation for many enzymes, this method has brought insights into the enzymatic mechanism, structure, and inhibitory requirements. In this review, the MAI approach, applied to different classes of enzyme, is reported from the point of view of biological activity.

Agitating for a design and regeneration agenda in a postconflict city: the case of Belfast

Introduction

Belfast has been a focus of academic attention for the last forty years with most interest centred on various aspects of ‘the Troubles’. Where there has been interest in the built environment, it has largely been about how the ‘security situation’ impacted directly on architecture and on the design and layout of social housing. This paper seeks to go beyond this to explore how the political- administrative culture of ‘the Troubles’ interacted with ‘normal’ market forces to shape the central area of the city, and to consider the responses of a recently formed activist group, known as the Forum for Alternative Belfast (hereafter referred to as the Forum). The paper is written by three of the directors of the Forum.1 Moreover, the empirical research presented here was undertaken by the Forum as part of a campaign to address issues relating to the design, layout and quality of Belfast’s built environment. In the longstanding tradition of participant observation working within an action-research paradigm, the participants have attempted to offer an account that is evidentially and purposefully selfcritical and reflective. It is of course recognised that while this approach offers many positive attributes, such as phenomenological access through immersion in the project, it also has the potential to bring compromise on research detachment and objectivity.2 To address the latter, the authors have attempted
to avoid polemical argument, and to support claims with primary or secondary research evidence. The authors also acknowledge that action-research has a chequered history; however, they would argue
that their approach is faithful to a concept that sees ‘research’ defined as understanding and ‘action’ defined as seeking change. The Forum’s very purpose is to seek change, but to do this requires evidence, collaboration and demonstration. And in this sense, it is a learning process for all participants, including the research activists, government officials, community organisations and students. The authors also recognise the complexity of factors that affect urban management and change, particularly in a city such as Belfast, which has had to cope with political violence for over thirty years. And they appreciate that in the context of conflict, governance is skewed to cope with political realities. Hamdi reminds us, however, that in practice there is an ‘important dialectic between top-down planning, with its formal and designed laws and structures, and bottom-up selforganizing collectivism—those “quantum and emergent systems” which Jane Jacobs argued long ago give cities their life and order.’3