The effect of crystallinity upon the friction and wear of graphites

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY WITH PRIOR ARRANGEMENT

The development of a testing procedure for dry friction brakes

A description of the background to testing friction materials for automotive brakes explains the need for a rapid, inexpensive means of assessing their behaviour in a way which is both accurate and meaningful. Various methods of controlling inertia dynamometers to simulate road vehicles are rejected in favour of programming by means of a commercially available XY plotter. Investigation of brake service conditions is used to set up test schedules, and a dynamometer programming unit built to enable service conditions on vehicles to be simulated on a full scale dynamometer. A technique is developed by which accelerated testing can be achieved without operating under overload conditions, saving time and cost without sacrificing validity. The development of programming by XY plotter is described, with a method of operating one XY plotter to programme the machine, monitor its own behaviour, and plot its own results in logical sequence. Commissioning trials are described and the generation of reproducible results in frictional behaviour and material durability is discussed. Teclmiques are developed to cross check the operation of the machine in retrospect, and retrospectively correct results in the event of malfunctions. Sensitivity errors in the measuring circuits are displayed between calibrations, whilst leaving the recorded results almost unaffected by error. Typical results of brake lining tests are used to demonstrate the range of performance parameters which can be studied by use of the machine. Successful test investigations completed on the machine are reported, including comments on behaviour of cast iron drums and discs. The machine shows that materials can repeat their complex friction/ temperature/speed/pressure relationships at a reproducibility of the order of +-0.003u and +~ 0.0002 in. thickness loss during wear tests. Discussion of practical and academic implications completes the report with recommendations for further work in both fields.

Doctoral work in translation studies as an interdisciplinary mutual learning process:how a translator, teacher educator and linguistic typologist worked together

The focus of this paper is on the doctoral research training experienced by one of the authors and the ways in which the diverse linguistic and disciplinary perspectives of her two supervisors (co-authors of this paper) mediated the completion of her study. The doctoral candidate is a professional translator/interpreter and translation teacher. The paper describes why and how she identified her research area and then focused on the major research questions in collaboration with her two supervisors, who brought their differing perspectives from the field of linguistics to this translation research, even though they are not translators by profession or disciplinary background and do not speak Korean. In addition, the discussion considers the focus, purpose and theoretical orientation of the research itself (which addressed questions of readability in translated English-Korean texts through detailed analysis of a corpus and implications for professional translator training) as well as the supervisory and conceptual processes and practices involved. The authors contend that doctoral research of this kind can be seen as a mutual learning process and that inter-disciplinary research can make a contribution not only to the development of rigorous research in the field of translation studies but also to the other disciplinary fields involved.

On the comparative performance of socially responsible and Islamic mutual funds

This is the first study to provide comprehensive analyses of the relative performance of both socially responsible investment (SRI) and Islamic mutual funds. The analysis proceeds in two stages. In the first, the performance of the two categories of funds is measured using partial frontier methods. In the second stage, we use quantile regression techniques.By combining two variants of the Free Disposal Hull (FDH) methods (order-m and order-?) in the first stage of analysis and quantile regression in the second stage, we provide detailed analyses of the impact of different covariates across methods and across different quantiles. In spite of the differences in the screening criteria and portfolio management of both types of funds, variation in the performance is only found for some of the quantiles of the conditional distribution of mutual fund performance. We established that for the most inefficient funds the superior performance of SRI funds is significant. In contrast, for the best mutual funds this evidence vanished and even Islamic funds perform better than SRI.These results show the benefits of performing the analysis using quantile regression.

Some effects of friction and lubrication during hot forging steel.

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT

On the comparative performance of socially responsible and Islamic mutual funds

This is the first study to provide comprehensive analyses of the relative performance of both socially responsible investment (SRI) and Islamic mutual funds. The analysis proceeds in two stages. In the first, the performance of the two categories of funds is measured using partial frontier methods. In the second stage, we use quantile regression techniques. By combining two variants of the Free Disposal Hull (FDH) methods (order- m and order- α) in the first stage of analysis and quantile regression in the second stage, we provide detailed analyses of the impact of different covariates across methods and across different quantiles. In spite of the differences in the screening criteria and portfolio management of both types of funds, variation in the performance is only found for some of the quantiles of the conditional distribution of mutual fund performance. We established that for the most inefficient funds the superior performance of SRI funds is significant. In contrast, for the best mutual funds this evidence vanished and even Islamic funds perform better than SRI. These results show the benefits of performing the analysis using quantile regression. © 2013 Elsevier B.V.

Neural network DEA for measuring the efficiency of mutual funds

Efficiency in the mutual fund (MF), is one of the issues that has attracted many investors in countries with advanced financial market for many years. Due to the need for frequent study of MF's efficiency in short-term periods, investors need a method that not only has high accuracy, but also high speed. Data envelopment analysis (DEA) is proven to be one of the most widely used methods in the measurement of the efficiency and productivity of decision making units (DMUs). DEA for a large dataset with many inputs/outputs would require huge computer resources in terms of memory and CPU time. This paper uses neural network back-ropagation DEA in measurement of mutual funds efficiency and shows the requirements, in the proposed method, for computer memory and CPU time are far less than that needed by conventional DEA methods and can therefore be a useful tool in measuring the efficiency of a large set of MFs. Copyright © 2014 Inderscience Enterprises Ltd.

Problems with mutual wills:a study of probate practice

Legislation: Law of Property (Miscellaneous Provisions) Act 1989 (c.34) s.2 Case: Healey v Brown [2002] W.T.L.R. 849 (Ch D) Paper looks at the use of mutual wills in practice. An empirical survey of probate solicitors is carried out and the results analysed. Significantly most solicitors seem, unaware of the controversial ruling as regards mutual wills in Healey v Brown and the impact of S.2 Law of Property Miscellaneous Provisions Act 1989 where land is concerned. Unsuprisingly the survey demonstrates that mutual wills are not commonly used and tend to be avoided by practising solicitors.

Comparative analysis of experimental and modelling of gas-solid flow hydrodynamics:effect of friction and interparticle cohesion forces

The effect of friction and interparticle cohesion forces on the gas-solid flow hydrodynamics was discussed. A proposed interparticle cohesion and frictional force terms have been tested in a continuum fully developed flow model to investigate their effect on the general hydrodynamic features of vertical duct flow. It was observed that both terms have direct effect on lowering the material carryover, which implies a reduced bed expansion in freely bubbling column. The parametric analysis shows that cohesion and frictional forces are high when compared to kinetic stress and hence it can play a major role in describing the hydrodynamics features of the flow.

Mutual Adaptation of the Computer Environment and Individual

In article the problems of mutual adapting of the humans and computer environment are reviewed. Features of image-intuitive and physical-mathematical modes of perception and thinking are investigated. The problems of choice of means and methods of the differential education the computerized society are considered.

Rutting-induced permeability loss of open graded friction course mixtures

Functionality of an open graded friction course (OGFC) depends on the high interconnected air voids or pores of the OGFC mixture. The authors' previous study indicated that the pores in the OGFC mixture were easily clogged by rutting deformation. Such a deformation-related clogging can cause a significant rutting-induced permeability loss in the OGFC mixture. The objective of this study was to control and reduce the rutting-induced permeability loss of the OGFC based on mixture design and layer thickness. Eight types of the OGFC mixtures with different air void contents, gradations, and nominal maximum aggregate sizes were fabricated in the laboratory. Wheel-tracking rutting tests were conducted on the OGFC slabs to simulate the deformation-related clogging. Permeability tests after different wheel load applications were performed on the rutted OGFC slabs using a falling head permeameter developed in the authors' previous study. The relationships between permeability loss and rutting depth as well as dynamic stability were developed based on the eight OGFC mixtures' test results. The thickness effects of the single-layer and the two-layer OGFC slabs were also discussed in terms of deformation-related clogging and the rutting-induced permeability loss. Results showed that the permeability coefficient decreases linearly with an increasing rutting depth of the OGFC mixtures. Rutting depth was recommended as a design index to control permeability loss of the OGFC mixture rather than the dynamic stability. Permeability loss due to deformation-related clogging can be effectively reduced by using a thicker single-layer OGFC or two-layer OGFC.