Arquitectura industrial tabacalera en la España peninsular: secaderos y fábricas

La Arquitectura industrial del tabaco en España está representada por dos tipos de construcciones, que corresponden a las dos fases en las que se divide el proceso de producción del tabaco: los secaderos (arquitectura bioclimática donde se realiza el secado), y las fábricas (centros donde se elabora el tabaco procedente de los secaderos). Las fábricas se repartieron por todo el territorio español, ocupando preferiblemente los lugares costeros, aunque existen casos en los que su localización obedecía a razones políticas. Estos edificios, en su mayoría, incluidos en los centros históricos de las ciudades, han cambiando de uso, y las antiguas fábricas de tabaco se han transformado en su mayoría, en centros de cultura, o centros sociales y representativos. La tesis surge del análisis de las características constructivas de la arquitectura industrial del tabaco: de los secaderos y de las fábricas, por tratarse de una tipología con suficiente entidad y un ejemplo de arquitectura bioclimática de producción en el caso de los secaderos, y por conseguir haberse adaptado a otros usos en el caso de las fábricas. La arquitectura de producción emplea un lenguaje acorde con los avances de la industrialización, anticipando materiales y estructuras, y condensando en una tipología específica las complejas relaciones establecidas entre producto, hombres y espacio. Estos edificios tuvieron una extensa implantación en el territorio, y se caracterizan por una serie de valores tecnológicos, arquitectónicos, sociológicos y paisajísticos, que hacen de ellos un documento de primera magnitud para conocer: la evolución e implantación de las técnicas constructivas (materiales y estructuras), los procesos de innovación tipológica y la estructura económica y procedimientos técnicos utilizados. El territorio en el que se insertan constituye su contexto territorial, por lo que no sería adecuado considerar estos edificios como elementos aislados, sin analizar la relación con el entorno en el que se generaron. Por este motivo, se analizan las condiciones higrotérmicas ambientales de los secaderos para compararlas con las de confort humano y establecer relaciones y parámetros compatibles. Los ejemplos analizados de secaderos son todos de fábrica. El uso del ladrillo como módulo principal para la elaboración de un edificio, supone la consideración de un “grado cero” de todo el aparato constructivo y compositivo de la arquitectura. Dejar el ladrillo visto, supone hacer explícitos todos los procesos acumulativos. Este elemento mínimo, permite unas posibilidades enormemente abiertas, pero no absolutamente aleatorias, que definen su propia lógica combinatoria. La exigencia de sinceridad, característica de la arquitectura industrial, en la exposición de los materiales, exhibiéndolos en su propia naturaleza y en el modo real de ser utilizados, se hace patente en este tipo de construcción. Se realiza un estudio de permeabilidad en las fachadas de los secaderos, para determinar el grado de ventilación y su relación con la orientación, el patrón de celosía empleado y el volumen total. Este sistema de acondicionamiento climático específico, puede servir de recurso a otras construcciones, por lo que se podría trasladar el sistema constructivo y formal de los secaderos a otros usos, desde una doble vertiente: Arquitectura para la adaptación climática al entorno. Arquitectura como generadora de condiciones climáticas específicas, en el interior. La utilidad de los secaderos es fundamentalmente: proporcionar sombra, ventilación y un espacio cubierto, pero permeable en sus fachadas. La arquitectura industrial debe ser reconocida dentro del conjunto patrimonial, debido a sus características propias que permiten su diferenciación del resto de la arquitectura. Conocer la estructura productiva permite analizar correctamente estas construcciones, ya que el programa inicial es básico para entender la organización del espacio interior. Las fábricas no se situaron cerca de las zonas de producción del tabaco, excepto en dos casos: Cádiz y Palazuelo, en los que existen secaderos y campos de cultivo de hoja de tabaco en las áreas cercanas. La principal causa de esta separación es que el proceso de obtención de tabaco es un proceso dividido en dos fases principales: proceso primario y proceso secundario. En el proceso primario la hoja de tabaco se seca en los secaderos, en los que es determinante el clima, pero únicamente en el caso del secado del tabaco al aire. En el proceso secundario sin embargo, el tabaco llega previamente tratado a las fábricas, por lo que no influye el clima en esta parte del proceso. Esta razón determina que en las áreas climáticas donde se centra el estudio, haya zonas en las que existen fábrica y secaderos y otras en las que únicamente existe fábrica, o sólo secaderos. La localización de las fábricas atendía a razones de muy diferente índole, las más importantes fueron: geográficas, estratégicas, y políticas. En la mayoría de las fábricas la elección de la ciudad de emplazamiento estaba ligada a la recepción de la materia prima, que principalmente se hacía por vía marítima, o acuática (el caso de Sevilla), y por vía terrestre, utilizando como medio de transporte el ferrocarril. Sólo dos casos, de las antiguas fábricas, corresponden a razones políticas, son las dos únicas que no están en la costa: Madrid y Logroño. La de Madrid se construyó por centralidad política, y porque geográficamente ocupaba el punto central de todas las comunicaciones terrestres por carretera y ferrocarril. Muchas de las fábricas se situaron cercanas a las estaciones de ferrocarril. La de Logroño atendió, sin embargo, a razones políticas. Para finalizar, se realiza un estudio comparativo de las fábricas de Sevilla, Madrid y San Sebastián. Las razones que justifican esta elección son: - La de Sevilla fue históricamente la primera fábrica y la más importante. - La de Madrid fue la más importante a nivel administrativo, la sede de Tabacalera se instaló en la capital, y después de la de Sevilla, fue la que sirvió de modelo al resto de las fábricas. - La de San Sebastián era la más grande del Norte. Los análisis que se han realizado son de: volumen y superficies de patios, superficies de cubierta, permeabilidad o huecos en fachadas, orientación y soleamiento de patios, distribución espacial interior y organización, y evolución de usos. Podemos observar que en la mayoría de estas fábricas ha habido una transformación en el uso, pasando de ser edificios industriales a edificios culturales. Estas construcciones se pueden considerar como infraestructuras adaptables, por ser útiles, sostenibles y funcionales. ABSTRACT The Spanish industrial architecture of tobacco is represented by two construction types that correspond to the two phases of tobacco production: the drying sheds (bioclimatic constructions where the drying process takes place) and factories (centres where tobacco is processed after the drying process). The factories were distributed throughout the Spanish territory, preferably occupying coastal locations, although some of them were located elsewhere following political reasons. Most of the buildings inside city centres have suffered changes in their use, becoming cultural, social or representative centres. This thesis attempts the analysis of the constructive systems employed in tobacco industrial architecture, from drying sheds to factories. The drying sheds are an example of bioclimatic industrial architecture. The factories are a typology that have successfully adapted to new uses. Industrial architecture uses a language that follows the advances in industrialization, anticipating new materials and structures, and merging the complex relationships established among products, human beings, space and locations. These buildings were promoted extensively in the country. They are characterized by technological architectural sociological and landscaping innovations. They are considered as important examples of the evolution and the implementation of construction techniques (building materials and structures). They are also considered as examples of innovation in the building typology, in their economic structure and in the technologies that they have applied. The settings in which the drying sheds are placed have an important influence in them. They cannot be considered as isolated elements. Instead, there is a close relationship between drying sheds and the surroundings in which they are located. Drying sheds’ hygrotermal and environmental conditions are analyzed in this thesis to compare them with the values of human comfort and find suitable relationships and parameters. All the drying sheds that have been analyzed are constructed with brick. This implies a consideration of “zero degree” for both the construction and the composition of the architectural process. The detailing - entails making all the accumulative processes explicit as the brick walls are left exposed. This minimal component allows a wide range of options that are never random but based on the logic of the way in which it is combined. The “sincerity” in the exposition of material, displaying them in their very nature and showing how they are really used, is a basic characteristic of industrial architecture, and it is even more expressive in these types of buildings. The walls of the drying sheds undergo a permeability assessment in order to determine the degree of ventilation and orientation, the lattice pattern used and the overall volume. This specific conditioning system can serve as a resource for other buildings, and consequently, it could be transferred to other uses within a two-pronged approach: -Climatically adapted architecture that takes into account the surroundings. -Architecture as a generator of specific climatic conditions indoors. Drying sheds’ main purposes / aims deal with how to provide shade, ventilation and a covered space as well as permeability. The industrial architecture must be recognized as historical valuable buildings due to its intrinsic and distinctive characteristics. Knowing the productive structure, allow us to make a proper analysis of these buildings, since the basic aim, is to understand the spatial organization indoors. Factories did not come close to the tobacco production, with the exception of Cádiz and Palazuelo, where there are sheds and tobacco croplands nearby. The main reason for this separation is that the process of obtaining tobacco has two processes: the primary process and the secondary process. In the primary process tobacco leaves are left to dry. In the secondary process, previously manufactured tobacco allocated in the factories where the weather conditions are not important. This fact determines that in the climate areas where this study tales place there are some cases in which we can find both factories and drying sheds, and others where there are either factories or drying sheds only. The location of these factories met various demands, being the most outstanding the ones related to geographic, strategic and political reasons. In most factories the choice of its location was often linked to the incoming of raw goods, mainly delivered through waterways –it is the case of Seville,) and by land, using railways. The location of the factories was linked to political reasons in only two cases Madrid and Logroño, which are the only ones that are not placed near the coast. The one in Madrid was built due to its political centrality and because geographically speaking, it was the reference landmark of means of land and rail transports. Many factories, in fact, were settled nearby rail stations. For the factory in Logroño, only political reasons were taken into consideration. I should like to close by undertaking a comparative study of factories in Seville, Madrid and San Sebastian. There are a number of reasons to substantiate this choice: -The factory in Seville was historically speaking the first that was built and the most important one. -The factory in Madrid was the most important one administratively. This factory was the headquarters as well as being, after Seville, the one which provided a model for other factories. -The factory in San Sebastian is the biggest in the North of Spain. The analysis carried out are related to the volume of the buildings and the surface areas of the courtyards, the surface of the roofs, the permeability of the walls and the openings of the façade, the orientation and the sun exposure, the indoor spatial distribution and organization and evolution of the uses (formerly and currently) I observe that in most of these factories there has been a change in the use of the buildings, from industrial cultural purposes. These buildings can be considered as adaptable infrastructures based on a combination of architectural practicability, sustainability and functionality.

Entre: de repente, sin fin, lo innombrable

Etiquetamos para reducir nuestra incertidumbre; clasificamos en base a términos opuestos para poder entender. El universo y el espacio construido en particular, se explican desde una arquitectónica dual: dentro – fuera, arriba – abajo, derecha – izquierda, día – noche, hombre – mujer. Lo que nos diferencia como grupo, raza o género, distinguiendo los modos de vivir, las ideologías y las teorías, es la relación que establecemos entre los términos opuestos: entre lo individual y lo colectivo, lo privado y lo público, la imaginación y la realidad, la identidad y la otredad, el orden y el caos, el deseo y la saciedad. El afán clasificatorio dicotómico de la realidad que la modernidad lleva a su extremo, hiere la vida: la mutua exclusión de los opuestos elimina la distancia, el espacio-tiempo entre ambos, que es donde la vida se sitúa. La concepción dual que rige nuestro conocimiento contamina también la relación entre los arquitectos y la sociedad, siendo la causa del ambiente tóxico que envuelve al habitante que ya no se identifica con los lugares que habita. Puede que sea oportuno pasar del pensamiento binario a una lógica de lo intersticial que abandone la dualidad para instalarse en el Entre; los arquitectos serían mediadores entre el poder y la vida, sintiendo el Entre como el transcurso de la vida y la potencia de interacción: los lugares ambiguos e intermedios, es donde sucede el encuentro entre los términos, entre arquitectos y habitantes, entre la imaginación y la realidad, entre tú y yo. ABSTRACT We label to reduce our uncertainty; we classify based on opposites to understand. The universe and all constructed space in particular, are explained from a dual architecture: inside - out, up - down, right - left, day - night, male - female, black - white. What differentiate us as a group, race, gender, distinguishing the lifestyles, ideologies and theories, is how we draw the relation between the opposites: between the individual and the collective, private and public, imagination and reality , identity and otherness, order and disorder, desire and satiety. The dichotomous classification of reality that modernity carried to its extreme, hurts life: the mutual exclusion of opposites eliminates the distance, the space-time between the two, which is where life is located. The dual conception that governs our knowledge has also contaminated the relationship between architect and society, being the cause of the toxic environment that surrounds the inhabitant who no longer identify himself with the places he inhabit. It may be appropriate pass from binary thinking to a logic of the interstitial which abandon duality to settle in Between; architect then will be the mediator between authorities and life, sensing the Between as a flowing of life a potency of interaction rather than a separation between the extremes; ambiguous, in –between, places are where the encounter between opposites happens, between the architect and the inhabitant, between imagination and reality, between you and me.

Soundscape quality analysis by fuzzy logic: A field study in Cordoba, Argentina

This research studies urban soundscapes through the comparative analysis of twelve public open spaces in the city of Córdoba (Argentina), taken as case studies. The work aims to examine selection of indicators and assessment tools intended to characterize soundscape quality. The field study was carried out through surveys and acoustic and psychoacoustic indicators, that are used together to objectively describe the sound quality of urban spaces. The study shows that, while there is a relationship of these indicators with the sound quality of the spaces, this is not linear. Their relative importance or influence depends on the interrelations occurring between the parameters studied. A model analyzing and correlating the parameters with the sound quality, based on the postulates of fuzzy logic, was applied as a tool of analysis, and it was seen to achieve a very close approximation to the subjective or perceptual response of the inhabitants. This close match between the model results and the perceptual response of the users confirms the fuzzy model as an effective tool for the study, not only of soundscapes, but also for those situations in which objective parameters must be related to the perceptual response of users.

Blind separation of auditory event-related brain responses into independent components

Averaged event-related potential (ERP) data recorded from the human scalp reveal electroencephalographic (EEG) activity that is reliably time-locked and phase-locked to experimental events. We report here the application of a method based on information theory that decomposes one or more ERPs recorded at multiple scalp sensors into a sum of components with fixed scalp distributions and sparsely activated, maximally independent time courses. Independent component analysis (ICA) decomposes ERP data into a number of components equal to the number of sensors. The derived components have distinct but not necessarily orthogonal scalp projections. Unlike dipole-fitting methods, the algorithm does not model the locations of their generators in the head. Unlike methods that remove second-order correlations, such as principal component analysis (PCA), ICA also minimizes higher-order dependencies. Applied to detected—and undetected—target ERPs from an auditory vigilance experiment, the algorithm derived ten components that decomposed each of the major response peaks into one or more ICA components with relatively simple scalp distributions. Three of these components were active only when the subject detected the targets, three other components only when the target went undetected, and one in both cases. Three additional components accounted for the steady-state brain response to a 39-Hz background click train. Major features of the decomposition proved robust across sessions and changes in sensor number and placement. This method of ERP analysis can be used to compare responses from multiple stimuli, task conditions, and subject states.

Mechanical separation of the complementary strands of DNA

We describe the mechanical separation of the two complementary strands of a single molecule of bacteriophage λ DNA. The 3′ and 5′ extremities on one end of the molecule are pulled progressively apart, and this leads to the opening of the double helix. The typical forces along the opening are in the range of 10–15 pN. The separation force signal is shown to be related to the local GC vs. AT content along the molecule. Variations of this content on a typical scale of 100–500 bases are presently detected.

Separation of the arterial wall from blood contact using hydrogel barriers reduces intimal thickening after balloon injury in the rat: The roles of medial and luminal factors in arterial healing

The objective of this study was to clarify the relative roles of medial versus luminal factors in the induction of thickening of the arterial intima after balloon angioplasty injury. Platelet-derived growth factor (PDGF) and thrombin, both associated with thrombosis, and basic fibroblast growth factor (bFGF), stored in the arterial wall, have been implicated in this process. To unequivocally isolate the media from luminally derived factors, we used a 20-μm thick hydrogel barrier that adhered firmly to the arterial wall to block thrombus deposition after balloon-induced injury of the carotid artery of the rat. Thrombosis, bFGF mobilization, medial repopulation, and intimal thickening were measured. Blockade of postinjury arterial contact with blood prevented thrombosis and dramatically inhibited both intimal thickening and endogenous bFGF mobilization. By blocking blood contact on the two time scales of thrombosis and of intimal thickening, and by using local protein release to probe, by reconstitution, the individual roles of PDGF-BB and thrombin, we were able to conclude that a luminally derived factor other than PDGF or thrombin is required for the initiation of cellular events leading to intimal thickening after balloon injury in the rat. We further conclude that a luminally derived factor is required for mobilization of medial bFGF.

Sorting by diffusion: An asymmetric obstacle course for continuous molecular separation

A separation technique employing a microfabricated sieve has been demonstrated by observing the motion of DNA molecules of different size. The sieve consists of a two-dimensional lattice of obstacles whose asymmetric disposition rectifies the Brownian motion of molecules driven through the device, causing them to follow paths that depend on their diffusion coefficient. A nominal 6% resolution by length of DNA molecules in the size range 15–30 kbp may be achieved in a 4-inch (10-cm) silicon wafer. The advantage of this method is that samples can be loaded and sorted continuously, in contrast to the batch mode commonly used in gel electrophoresis.

Genetic Separation of FK506 Susceptibility and Drug Transport in the Yeast Pdr5 ATP-binding Cassette Multidrug Resistance Transporter

Overexpression of the yeast Pdr5 ATP-binding cassette transporter leads to pleiotropic drug resistance to a variety of structurally unrelated cytotoxic compounds. To identify Pdr5 residues involved in substrate recognition and/or drug transport, we used a combination of random in vitro mutagenesis and phenotypic screening to isolate novel mutant Pdr5 transporters with altered substrate specificity. A plasmid library containing randomly mutagenized PDR5 genes was transformed into appropriate drug-sensitive yeast cells followed by phenotypic selection of Pdr5 mutants. Selected mutant Pdr5 transporters were analyzed with respect to their expression levels, subcellular localization, drug resistance profiles to cycloheximide, rhodamines, antifungal azoles, steroids, and sensitivity to the inhibitor FK506. DNA sequencing of six PDR5 mutant genes identified amino acids important for substrate recognition, drug transport, and specific inhibition of the Pdr5 transporter. Mutations were found in each nucleotide-binding domain, the transmembrane domain 10, and, most surprisingly, even in predicted extracellular hydrophilic loops. At least some point mutations identified appear to influence folding of Pdr5, suggesting that the folded structure is a major substrate specificity determinant. Surprisingly, a S1360F exchange in transmembrane domain 10 not only caused limited substrate specificity, but also abolished Pdr5 susceptibility to inhibition by the immunosuppressant FK506. This is the first report of a mutation in a yeast ATP-binding cassette transporter that allows for the functional separation of substrate transport and inhibitor susceptibility.

Inhibition of Chromosomal Separation Provides Insights into Cleavage Furrow Stimulation in Cultured Epithelial Cells

While astral microtubules are believed to be primarily responsible for the stimulation of cytokinesis in Echinoderm embryos, it has been suggested that a signal emanating from the chromosomal region and mediated by the interzonal microtubules stimulates cytokinesis in cultured mammalian cells. To test this hypothesis, we examined cytokinesis in normal rat kidney cells treated with an inhibitor of topoisomerase II, (+)-1,2-bis(3,5-dioxopiperaz-inyl-1-yl)propane, which prevents the separation of sister chromatids and the formation of a spindle interzone. The majority of treated cells showed various degrees of abnormality in cytokinesis. Furrows frequently deviated from the equatorial plane, twisting daughter cells into irregular shapes. Some cells developed furrows in regions outside the equator or far away from the spindle. In addition, F-actin and myosin II accumulated at the lateral ingressing margins but did not form a continuous band along the equator as in control cells. Imaging of microinjected 5- (and 6-) carboxymtetramethylrhodamine-tubulin revealed that a unique set of microtubules projected out from the chromosomal vicinity upon anaphase onset. These microtubules emanated toward the lateral cortex, where they delineated sites of microtubule bundle formation, cortical ingression, and F-actin and myosin II accumulation. As centrosome integrity and astral microtubules appeared unperturbed by (+)-1,2-bis(3,5-dioxopiperaz-inyl-1-yl)propane treatment, the present observations cannot be easily explained by the conventional model involving astral microtubules. We suggest that in cultured epithelial cells the organization of the chromosomes dictates the organization of midzone microtubules, which in turn determines and maintains the cleavage activity.

Fission Yeast Pob1p, Which Is Homologous to Budding Yeast Boi Proteins and Exhibits Subcellular Localization Close to Actin Patches, Is Essential for Cell Elongation and Separation

The fission yeast pob1 gene encodes a protein of 871 amino acids carrying an SH3 domain, a SAM domain, and a PH domain. Gene disruption and construction of a temperature-sensitive pob1 mutant indicated that pob1 is essential for cell growth. Loss of its function leads to quick cessation of cellular elongation. Pob1p is homologous to two functionally redundant Saccharomyces cerevisiae proteins, Boi1p and Boi2p, which are necessary for cell growth and relevant to bud formation. Overexpression of pob1 inhibits cell growth, causing the host cells to become round and swollen. In growing cells, Pob1p locates at cell tips during interphase and translocates near the division plane at cytokinesis. Thus, this protein exhibits intracellular dynamics similar to F-actin patches. However, Pob1p constitutes a layer, rather than patches, at growing cell tips. It generates two split discs flanking the septum at cytokinesis. The pob1-defective cells no longer elongate but swell gradually at the middle, eventually assuming a lemon-like morphology. Analysis using the pob1-ts allele revealed that Pob1p is also essential for cell separation. We speculate that Pob1p is located on growing plasma membrane, possibly through the function of actin patches, and may recruit proteins required for the synthesis of cell wall.

Separation of the glucose-stimulated cytoplasmic and mitochondrial NAD(P)H responses in pancreatic islet β cells

Two-photon excitation microscopy was used to image and quantify NAD(P)H autofluorescence from intact pancreatic islets under glucose stimulation. At maximal glucose stimulation, the rise in whole-cell NAD(P)H levels was estimated to be ≈30 μM. However, because glucose-stimulated insulin secretion involves both glycolytic and Kreb's cycle metabolism, islets were cultured on extracellular matrix that promotes cell spreading and allows spatial resolution of the NAD(P)H signals from the cytoplasm and mitochondria. The metabolic responses in these two compartments are shown to be differentially stimulated by various nutrient applications. The glucose-stimulated increase of NAD(P)H fluorescence within the cytoplasmic domain is estimated to be ≈7 μM. Likewise, the NAD(P)H increase of the mitochondrial domain is ≈60 μM and is delayed with respect to the change in cytoplasmic NAD(P)H by ≈20 sec. The large mitochondrial change in glucose-stimulated NAD(P)H thus dominates the total signal but may depend on the smaller but more rapid cytoplasmic increase.

In vitro cloning of complex mixtures of DNA on microbeads: Physical separation of differentially expressed cDNAs

We describe a method for cloning nucleic acid molecules onto the surfaces of 5-μm microbeads rather than in biological hosts. A unique tag sequence is attached to each molecule, and the tagged library is amplified. Unique tagging of the molecules is achieved by sampling a small fraction (1%) of a very large repertoire of tag sequences. The resulting library is hybridized to microbeads that each carry ≈106 strands complementary to one of the tags. About 105 copies of each molecule are collected on each microbead. Because such clones are segregated on microbeads, they can be operated on simultaneously and then assayed separately. To demonstrate the utility of this approach, we show how to label and extract microbeads bearing clones differentially expressed between two libraries by using a fluorescence-activated cell sorter (FACS). Because no prior information about the cloned molecules is required, this process is obviously useful where sequence databases are incomplete or nonexistent. More importantly, the process also permits the isolation of clones that are expressed only in given tissues or that are differentially expressed between normal and diseased states. Such clones then may be spotted on much more cost-effective, tissue- or disease-directed, low-density planar microarrays.

Small molecule developmental screens reveal the logic and timing of vertebrate development

Much has been learned about vertebrate development by random mutagenesis followed by phenotypic screening and by targeted gene disruption followed by phenotypic analysis in model organisms. Because the timing of many developmental events is critical, it would be useful to have temporal control over modulation of gene function, a luxury frequently not possible with genetic mutants. Here, we demonstrate that small molecules capable of conditional gene product modulation can be identified through developmental screens in zebrafish. We have identified several small molecules that specifically modulate various aspects of vertebrate ontogeny, including development of the central nervous system, the cardiovascular system, the neural crest, and the ear. Several of the small molecules identified allowed us to dissect the logic of melanocyte and otolith development and to identify critical periods for these events. Small molecules identified in this way offer potential to dissect further these and other developmental processes and to identify novel genes involved in vertebrate development.

Functional separation of pre-rRNA processing steps revealed by truncation of the U3 small nucleolar ribonucleoprotein component, Mpp10

The U3 small nucleolar ribonucleoprotein (snoRNP) is required for three cleavage events that generate the mature 18S rRNA from the pre-rRNA. In Saccharomyces cerevisiae, depletion of Mpp10, a U3 snoRNP-specific protein, halts 18S rRNA production and impairs cleavage at the three U3 snoRNP-dependent sites: A0, A1, and A2. We have identified truncation mutations of Mpp10 that affect 18S rRNA synthesis and confer cold-sensitivity and slow growth. However, distinct from yeast cells depleted of Mpp10, the mutants carrying these truncated Mpp10 proteins accumulate a novel precursor, resulting from cleavage at only A0. The Mpp10 truncations do not alter association of Mpp10 with the U3 snoRNA, nor do they affect snoRNA or protein stability. Thus, the role in processing of the U3 snoRNP can be separated into cleavage at the A0 site, which occurs in the presence of truncated Mpp10, and cleavage at the A1/A2 sites, which occurs only with intact Mpp10. These results strongly argue for a role for Mpp10 in processing at the A1/A2 sites.

Logic gates using high Rydberg states

Connected logic gates can be operated on the levels of one molecule by making use of the special properties of high Rydberg states. Explicit experimental results for the NO molecule are provided as an example. A number of other options, including that of several gates concatenated so as to operate as a full adder, are discussed. Specific properties of high Rydberg states that are used are: their autoionization is delayed so that they can be distinguished from direct multiphoton ionization, during their long life such states also can decay by energy transfer to the molecular core in a way that can be controlled by the judicious application of very weak external electrical fields, and the Rydberg states can be detected by the application of an ionizing electrical field. The combination of two (or three) color photons with and without external weak fields allows the construction of quite elaborate logic circuit diagrams and shows that taking advantage of the different intramolecular dynamics of levels that differ by their excitation enables the compounding of logic operations on one molecular frame.