Use of simulated annealing in standardization and optimization of the acerola wine production

In this study, seven wine samples were prepared varying the amount of pulp of acerola fruits and the sugar content using the simulated annealing technique to obtain the optimal sensory qualities and cost for the wine produced. S. cerevisiae yeast was used in the fermentation process and the sensory attributes were evaluated using a hedonic scale. Acerola wines were classified as sweet, with 11°GL of alcohol concentration and with aroma, taste, and color characteristics of the acerola fruit. The simulated annealing experiments showed that the best conditions were found at mass ratio between 1/7.5-1/6 and total soluble solids between 28.6-29.0 °Brix, from which the sensory acceptance scores of 6.9, 6.8, and 8.8 were obtained for color, aroma, and flavor, respectively, with a production cost 43-45% lower than the cost of traditional wines commercialized in Brazil.

Optimization of image analysis techniques for quality assessment of whole-wheat breads made with fat replacer

The cellular structure of healthy food products, with added dietary fiber and low in calories, is an important factor that contributes to the assessment of quality, which can be quantified by image analysis of visual texture. This study seeks to compare image analysis techniques (binarization using Otsu’s method and the default ImageJ algorithm, a variation of the iterative intermeans method) for quantification of differences in the crumb structure of breads made with different percentages of whole-wheat flour and fat replacer, and discuss the behavior of the parameters number of cells, mean cell area, cell density, and circularity using response surface methodology. Comparative analysis of the results achieved with the Otsu and default ImageJ algorithms showed a significant difference between the studied parameters. The Otsu method demonstrated the crumb structure of the analyzed breads more reliably than the default ImageJ algorithm, and is thus the most suitable in terms of structural representation of the crumb texture.

Optimization of the extraction process of polyphenols from cashew apple agro-industrial residues

The goal of this study was to determine the chemical composition of cashew apples agro-industrial residue and optimize the process of polyphenols extraction in this residue. The extraction process conditions were defined using a 24-1 fractional factorial experimental design using acetone and methanol as solvents. The independent variables were: time (30 to 90 min), temperature (30 to 50 °C), solvent concentrations (50% to 90%), agitation speed (100 to 300 rpm); the dependent variables were: total phenolic content and DPPH scavenging capacity. The optimized process was carried out by applying the Central Composite Rotational Design (CCRD) considering the results obtained with the 24-1 fractional factorial experimental design. The residue presented bioactive compounds in its composition, with emphasis on the content of total phenolic compounds (1975.64 mg/ 100 g). The extraction process was not affected by methanol; however, acetone affected the amounts of extracted phytochemicals. Extracts with high levels of polyphenols and strong DPPH scavenging capacity (> 80%) were obtained using 55% acetone, 30 minutes, 30 °C, and 150 rpm. The results showed that cashew apple residue is a potential natural source of bioactive compounds with strong antioxidant capacity. These compounds could be used partially or totally to replace synthetic antioxidants.

Extraction optimization of antioxidant polysaccharides from Auricularia auricula fruiting bodies

AbstractThe extraction conditions (liquid-solid ratio, temperature and time) of antioxidant polysaccharides from Auricularia auricula fruiting bodies (AAFB) were optimized using response surface methodology (RSM). The Box-Behnken experimental results showed the optimum extraction conditions as follows: a liquid-solid ratio of 38.77 mL/g, a temperature of 93.98 °C and a time of 3.41 h. Under these conditions, the maximal polysaccharide yield was 10.46 g/100 g. In addition, AAFB polysaccharides exhibited stronger antioxidant activities by evaluating of Fe2+-chelating ability and hydroxyl radical scavenging activity with IC50 values of 0.43 and 0.38 mg/mL, respectively. These results indicated that AAFB polysaccharides might be potentially used as a natural antioxidant.

Optimization of the HS-SPME-GC/MS technique for determining volatile compounds in red wines made from Isabel grapes (Vitis labrusca)

Abstract Brazilian wine production is characterized by Vitis labrusca grape varieties, especially the economically important Isabel cultivar, with over 80% of its production destined for table wine production. The objective of this study was to optimize and validate the conditions for extracting volatile compounds from wine with the solid-phase microextraction technique, using the response surface method. Based on the response surface analysis, it can be concluded that the central point values maximize the process of extracting volatile compounds from wine, i.e., an equilibrium time of 15 minutes, an extraction time of 35 minutes, and an extraction temperature of 30 °C. Esters were the most numerous compounds found under these extraction conditions, indicating that wines made from Isabel cultivar grapes are characterized by compounds that confer a fruity aroma; this finding corroborates the scientific literature.

Optimization of the HS-SPME-GC/MS technique for the analysis of volatile compounds in caprine Coalho cheese using response surface methodology

Abstract Caprine Coalho cheese presents great potential for a typical protected designation of origin, considering that this traditional Brazilian cheese presents a slightly salty and acid flavor, combined with a unique texture. This study optimized the HS-SPME-GC-MS methodology for volatile analysis of Coalho cheese, which can be used as a tool to help in the identification of the distinctive aroma profile of this cheese. The conditions of equilibrium time, extraction temperature and time were optimized using the statistical tool factorial experimental design 23, and applying the desirability function. After the evaluation, it was concluded that the optimum extraction conditions comprised equilibrium and extraction time of 20 and 40 minutes, respectively; and ideal extraction temperature of 45 °C. The optimum extraction of volatile compounds in goat Coalho cheese captured 32 volatile compounds: 5 alcohols, 5 esters, 3 ketones, 6 acids, 3 aldehydes, 3 terpenes, and 7 hydrocarbons.

Extraction optimization of polyphenols, antioxidant and xanthine oxidase inhibitory activities from Prunus salicina Lindl.

Abstract Optimization of polyphenols extraction from plum (Prunus salicina Lindl.) was evaluated using response surface methodology. The Box-Behnken experimental results showed the optimal conditions involved an extraction temperature of 59 °C, a sonication time of 47 min, and an ethanol concentration of 61% respectively. The maximum extraction yield of total polyphenols was 44.74 mg gallic acid equivalents per gram of dried plum at optimal conditions. Polyphenol extracts exhibited stronger antioxidant activities than Vc by evaluating of 1,1-diphenyl-2-picrylhydrazyl (DPPH) and hydroxyl radical scavenging activity. Furthermore, polyphenol extracts (IC50 = 179 g/mL) showed obvious inhibitory effects on xanthine oxidase. These findings suggest that polyphenol extracts from P. salicina can be potentially used as natural antioxidant and xanthine oxidase inhibitory agents.

Logistics Cost Optimization of Road Freight Shipments in a Consumer Goods Company

In the industry of the case company, transportation and warehousing costs account for more than 10% of the total cost which is more than on average. A Finnish company has an understanding that by sending larger shipments in parcels, they could save tens of thousands of euros annually in freight costs in Finland’s domestic shipments. To achieve these savings and optimize total logistics cost, company’s interest is to find out which is the cost efficient way of shipping road shipments of certain volumes; in parcel boxes or on pallets, and what should be the split volume determining the shipment type. Distribution center (DC) costs affect this decision and therefore they need to be also evaluated to determine the total logistics cost savings. Main results were achieved by executing activity-based costing-calculations including DC and road freight costs to determine the ideal split volume with which the total logistics cost is optimal. Calculations were done for Finland’s DC, separately for two main road freight destinations, Finland and Sweden, which cover 50% of road shipment spend. Data for calculations was collected both manually and automatically from various internal and external sources, such as the company ERP system and logistics service providers’ (LSP) reporting. DC processes were studied in practice and compared to model processes. Currently used freight rates were compared to existing pricing models and freight service tendering process was evaluated by participating in the process and comparing it to the models based on literature. The results show that the potential savings are not as significant as the company hoped for, mainly because of packing work increasing DC labor cost. Annual savings by setting ideal split volume per country would account for 0,4 % of the warehousing and transportation costs of shipments in scope of this thesis. Split volume should be set separately for each route, mainly because the pricing model for road freight is different in each country. For some routes bigger parcels should be sent but for some routes pallets should be used more. Next step is to do these calculations for remaining routes to determine total savings potential. Other findings show that the processes in the DC are designed well and the company could achieve savings by executing tenders more efficiently. Company should also pay more attention to parcel pricing and packing the shipments accordingly.

Optimization of Transportation System by Tailored Logistics Network: A Case Study in Automotive Industry

This thesis aims to redesign the supply chain system in an automotive industry in order to obtain space reduction in the inventory by using tailored logistics network. The redesigning process by tailored supply chain will combine all possible shipment methods including direct shipment, milk-run, milk-run via distribution center and Kanban delivery. The current supply chain system in Nissan goes rather well when the production volume is in moderate level. However, when the production volume is high, there is a capacity problem in the warehouse to accommodate all delivered parts from suppliers. Hence, the optimization of supply chain system is needed in order to obtain efficient logistics process and effective inventory consumption. The study will use primary data for both qualitative and quantitative approach as the research methods. Qualitative data will be collected by conducting interviews with people related to procurement and inventory control. Quantitative data consists of list of suppliers with their condition in several parameters which will be evaluated and analyzed by using scoring method to assign the most suitable transportation network to each suppliers for improvement of inventory reduction in a cost efficient manner.

Real-time simulation of multibody systems with applications for working mobile vehicles

This dissertation describes an approach for developing a real-time simulation for working mobile vehicles based on multibody modeling. The use of multibody modeling allows comprehensive description of the constrained motion of the mechanical systems involved and permits real-time solving of the equations of motion. By carefully selecting the multibody formulation method to be used, it is possible to increase the accuracy of the multibody model while at the same time solving equations of motion in real-time. In this study, a multibody procedure based on semi-recursive and augmented Lagrangian methods for real-time dynamic simulation application is studied in detail. In the semirecursive approach, a velocity transformation matrix is introduced to describe the dependent coordinates into relative (joint) coordinates, which reduces the size of the generalized coordinates. The augmented Lagrangian method is based on usage of global coordinates and, in that method, constraints are accounted using an iterative process. A multibody system can be modelled as either rigid or flexible bodies. When using flexible bodies, the system can be described using a floating frame of reference formulation. In this method, the deformation mode needed can be obtained from the finite element model. As the finite element model typically involves large number of degrees of freedom, reduced number of deformation modes can be obtained by employing model order reduction method such as Guyan reduction, Craig-Bampton method and Krylov subspace as shown in this study The constrained motion of the working mobile vehicles is actuated by the force from the hydraulic actuator. In this study, the hydraulic system is modeled using lumped fluid theory, in which the hydraulic circuit is divided into volumes. In this approach, the pressure wave propagation in the hoses and pipes is neglected. The contact modeling is divided into two stages: contact detection and contact response. Contact detection determines when and where the contact occurs, and contact response provides the force acting at the collision point. The friction between tire and ground is modelled using the LuGre friction model, which describes the frictional force between two surfaces. Typically, the equations of motion are solved in the full matrices format, where the sparsity of the matrices is not considered. Increasing the number of bodies and constraint equations leads to the system matrices becoming large and sparse in structure. To increase the computational efficiency, a technique for solution of sparse matrices is proposed in this dissertation and its implementation demonstrated. To assess the computing efficiency, augmented Lagrangian and semi-recursive methods are implemented employing a sparse matrix technique. From the numerical example, the results show that the proposed approach is applicable and produced appropriate results within the real-time period.

Stretching the drum skin : an analysis of power relations in leadership and succession in the Evangelical Lutheran church in Tanzania-Northern diocese 1942– 1993

-

Screening of power to gas projects

The purpose of this thesis was the screening of power to gas projects worldwide and reviewing the technologies used and applications for the end products. This study focuses solely on technical solutions and feasibility, economical profitability is excluded. With power grids having larger penetrations of intermittent sources such as solar and wind power, the demand and production cannot be balanced in conventional methods. Technologies for storing electric power in times of surplus production are needed, and the concept called power to gas is a solution for this problem. A total of 57 projects mostly located in Europe were reviewed by going through publications, presentations and project web pages. Hydrogen is the more popular end product over methane. Power to gas is a viable concept when power production from intermittent sources needs to be smoothed and time shifted, when carbon free fuels are produced for vehicles and when chemical industry needs carbon neutral raw materials.

The role of motivational systems in community service involvement : initiating and sustaining factors and quality of experience /

Community service participation can have a positive impact on development, especially for youth. Although researchers have found positive outcomes, there has been a notable decline in youth participation over the past few years (Statistics Canada, 2000). Given the positive outcomes and current decline, it has been argued that youth should be encouraged to get involved in service activities. In the present study, quantitative and qualitative data were collected to determine factors that would help youth to initiate and sustain service, along with examining the quality of their experience. Eighty-two university undergraduate students (23 men), ranging in age from 17-20 years completed a 60-minute self-report questionnaire. Initiating and sustaining factors, motivational systems (similar to approach and avoidance dimensions), activity dimensions {Structure, Supportive Social Environment), quality of experience {Positive, Stress-Challenge), and future intention to participate in community service were measured. Eight participants also completed a 20-minute telephone interview to complement and expand on the quantitative data collected. Some initiating and sustaining factors were specific to individuals higher on the avoidance dimension, while others were relevant to those higher on the approach dimension. Several factors also were important to individuals regardless of their motivational system orientation. Positive quality of experience was related positively to experiencing a supportive social environment. In addition, women rated their community service as more positive than did men. A predicted interaction between the avoidance dimension and Structure in predicting positive quality of experience was not supported; however, positive quality of experience was predicted by the interaction of the approach dimension and Structure. A tested interaction between the avoidance dimension and Supportive Social Environment in predicting positive quality of experience was not supported. Similarly, a predicted interaction between the approach dimension and Supportive Social Environment in predicting positive experience quality was not supported. However, Supportive Social Environment was positively related to positive quality of experience. No support was found for a mediational role for positive quality of experience or stress-challenge quality of experience in exploring the relation between motivational orientation and fiiture intention to engage in service activities. The results of this study suggest that participating in a service environment that is supportive and provides the opportunity for social interactions with others would promote positive quality of experience and help youth sustain involvement. Thus, to help youth have positive experiences and to remain active in service, it is important for service agencies to promote these types of environments. In addition, some initiating and sustaining factors were specific to youth higher on the avoidance dimension and some were relevant to youth higher on the approach dimension. Therefore, service agencies may need to consider using different recruitment and retention strategies, depending on the type of youth they wish to recruit.

Asymmetrical balance of power in preadolescents' mutual friendships

Dyadic friendShip' asymmetry was examined in relation to gender, friendship quality, and friendship status. Sixty-nine grade five children and their mutual, same-sex, friends participated in a laboratory session comprised ofvarious activities and completed questionnaires to identify mutual friends and evaluate friendship quality. Asymmetry of power was assessed observationally during an origami task. Variations in balance of power were evident in children's friendships. Boys' dyads had significantly greater levels of asymmetry than girls' dyads. Regardless of gender, asymmetry was associated with lower friendship quality, particularly as indexed by validation and caring and conflict resolution. Asymmetry was unrelated to differences in friendship status. Furthermore, relative individual power within the friendship was not related to individual perceptions offriendship quality. The implications ofthese findings in the theoretical and empirical literature were considered and suggestions for future research were made.

Optimization of the valence energy variance of the CuH molecule

We developed the concept of split-'t to deal with the large molecules (in terms of the number of electrons and nuclear charge Z). This naturally leads to partitioning the local energy into components due to each electron shell. The minimization of the variation of the valence shell local energy is used to optimize a simple two parameter CuH wave function. Molecular properties (spectroscopic constants and the dipole moment) are calculated for the optimized and nearly optimized wave functions using the Variational Quantum Monte Carlo method. Our best results are comparable to those from the single and double configuration interaction (SDCI) method.