Automation of Chemical Spray Pyrolysis Unit and Fabrication of Sprayed CuInS2/In2S3 Solar Cell

Aim of the present work was to automate CSP process, to deposit and characterize CuInS2/In2S3 layers using this system and to fabricate devices using these films.An automated spray system for the deposition of compound semiconductor thin films was designed and developed so as to eliminate the manual labour involved in spraying and facilitate standardization of the method. The system was designed such that parameters like spray rate, movement of spray head, duration of spray, temperature of substrate, pressure of carrier gas and height of the spray head from the substrate could be varied. Using this system, binary, ternary as well as quaternary films could be successfully deposited.The second part of the work deal with deposition and characterization of CuInS2 and In2S3 layers respectively.In the case of CuInS2 absorbers, the effects of different preparation conditions and post deposition treatments on the optoelectronic, morphological and structural properties were investigated. It was observed that preparation conditions and post deposition treatments played crucial role in controlling the properties of the films. The studies in this direction were useful in understanding how the variation in spray parameters tailored the properties of the absorber layer. These results were subsequently made use of in device fabrication process.Effects of copper incorporation in In2S3 films were investigated to find how the diffusion of Cu from CuInS2 to In2S3 will affect the properties at the junction. It was noticed that there was a regular variation in the opto-electronic properties with increase in copper concentration.Devices were fabricated on ITO coated glass using CuInS2 as absorber and In2S3 as buffer layer with silver as the top electrode. Stable devices could be deposited over an area of 0.25 cm2, even though the efficiency obtained was not high. Using manual spray system, we could achieve devices of area 0.01 cm2 only. Thus automation helped in obtaining repeatable results over larger areas than those obtained while using the manual unit. Silver diffusion on the cells before coating the electrodes resulted in better collection of carriers.From this work it was seen CuInS2/In2S3 junction deposited through automated spray process has potential to achieve high efficiencies.

Young’s modulus of silicon nitride used in scanning force microscope cantilevers

The Young’s modulus and Poisson’s ratio of high-quality silicon nitride films with 800 nm thickness, grown on silicon substrates by low-pressure chemical vapor deposition, were determined by measuring the dispersion of laser-induced surface acoustic waves. The Young’s modulus was also measured by mechanical tuning of commercially available silicon nitride cantilevers, manufactured from the same material, using the tapping mode of a scanning force microscope. For this experiment, an expression for the oscillation frequencies of two-media beam systems is derived. Both methods yield a Young’s modulus of 280–290 GPa for amorphous silicon nitride, which is substantially higher than previously reported (E5146 GPa). For Poisson’s ratio, a value of n 50.20 was obtained. These values are relevant for the determination of the spring constant of the cantilever and the effective tip–sample stiffness

Studies on the dynamics and rheology of dilute suspensions of Brownian particles in simple shear flow under the action of an external force

We present a novel approach to computing the orientation moments and rheological properties of a dilute suspension of spheroids in a simple shear flow at arbitrary Peclct number based on a generalised Langevin equation method. This method differs from the diffusion equation method which is commonly used to model similar systems in that the actual equations of motion for the orientations of the individual particles are used in the computations, instead of a solution of the diffusion equation of the system. It also differs from the method of 'Brownian dynamics simulations' in that the equations used for the simulations are deterministic differential equations even in the presence of noise, and not stochastic differential equations as in Brownian dynamics simulations. One advantage of the present approach over the Fokker-Planck equation formalism is that it employs a common strategy that can be applied across a wide range of shear and diffusion parameters. Also, since deterministic differential equations are easier to simulate than stochastic differential equations, the Langevin equation method presented in this work is more efficient and less computationally intensive than Brownian dynamics simulations.We derive the Langevin equations governing the orientations of the particles in the suspension and evolve a procedure for obtaining the equation of motion for any orientation moment. A computational technique is described for simulating the orientation moments dynamically from a set of time-averaged Langevin equations, which can be used to obtain the moments when the governing equations are harder to solve analytically. The results obtained using this method are in good agreement with those available in the literature.The above computational method is also used to investigate the effect of rotational Brownian motion on the rheology of the suspension under the action of an external force field. The force field is assumed to be either constant or periodic. In the case of con- I stant external fields earlier results in the literature are reproduced, while for the case of periodic forcing certain parametric regimes corresponding to weak Brownian diffusion are identified where the rheological parameters evolve chaotically and settle onto a low dimensional attractor. The response of the system to variations in the magnitude and orientation of the force field and strength of diffusion is also analyzed through numerical experiments. It is also demonstrated that the aperiodic behaviour exhibited by the system could not have been picked up by the diffusion equation approach as presently used in the literature.The main contributions of this work include the preparation of the basic framework for applying the Langevin method to standard flow problems, quantification of rotary Brownian effects by using the new method, the paired-moment scheme for computing the moments and its use in solving an otherwise intractable problem especially in the limit of small Brownian motion where the problem becomes singular, and a demonstration of how systems governed by a Fokker-Planck equation can be explored for possible chaotic behaviour.

Hysteresis in a system driven by either generalized force or displacement variables: martensitic phase transition in single-crystalline Cu-Zn-Al

We report on experiments aimed at comparing the hysteretic response of a Cu-Zn-Al single crystal undergoing a martensitic transition under strain-driven and stress-driven conditions. Strain-driven experiments were performed using a conventional tensile machine while a special device was designed to perform stress-driven experiments. Significant differences in the hysteresis loops were found. The strain-driven curves show reentrant behavior yield point which is not observed in the stress-driven case. The dissipated energy in the stress-driven curves is larger than in the strain-driven ones. Results from recently proposed models qualitatively agree with experiments.

Child labour in India

This thesis entitled “Child labour in india”Children are "supremely important assets" of the nation, India proudly asserts in the National Policy for Children (1974) gracefully acknowledging that they are future citizens on whose shoulders the destiny of our nation rests.Childhood is a time of discovery as the world and all it contains are new to children. It is a time of excitement and anticipation. lt is a time of dreams and fantasies. And it is a time of receiving love and appreciation. Paradoxically, a picture of contrast is a common experience in India as a vast majority of children who are starved of basic needs of nutrition, health and education are made to work at an early age in exploitative conditions. The specter of child labour is a glaring anomaly in a country graciously adorning human right. In an exposition of the problem involving human rights abuse, Chapters from Two to Five of this study have shot into focus the human rights jurisprudence with special reference to the rights of children. Children have a particular identity as children and they also have a universal identity as human beings.The concern for mankind expressed unequivocally and transcending the globe will be real and moving and not mere rhetoric and ritual if and only when it begins with children, as, to quote the words of Nehru, the human being counts much more as a child than as a grown up.The first three of these rights namely right to health, right to nutritive food and right to education are dealt with in Chapter Four. Finally, the positive effects of education have been sketched in that chapter to impress upon its significance in the development of human capitals.legitimization. The theme of legitimacy was rationalised on the ground of poverty as a strategy for achieving eradication of child labour ultimately by enforcing minimum wages, shorter working hours, leave compensation, non-formal education etc., as the employer would soon discover that child labour is not cheap and would be obliged to substitute adult labour. However, humanising the work life is only a promise to the detriment of children as the Act of 1986 enacted as a part of the new strategy is nearingcompletion of a decade of existence but nowhere near the fulfilment of the mission.As similar urge is more necessary and overdue, it has been suggested that a special body be established with all powers for cognisance of human rights abuse of children.It is proposed to conclude this study with a brief summary of the inferences drawn from the foregoing chapters along with a few suggestions emerging out of those inferences

Studies in molecular mechanics using spectroscopic data exact force field and bond in homogeneity

This thesis deals with some studies in molecular mechanic using spectroscopic data. It includes an improvement in the parameter technique for the evaluation of exact force fields, the introduction of a new and simple algebraic method for the force field calculation and a study of asymmetric variation of bonding forces along a bond.

Studies in molecular dynamics: new criteria for evaluation of intramolecular force fields

The present thesis deals with some studies in molecular dynamics using spectroscopic data. Two new approximation procedures the variable method and the average bonding energy criterion have been developed for a reliable calculation of molecular force fields and applied to several molecular species belonging to the xy2 type.

"Profile of Industrial workers in Kerala - A Comparative Study of the Socioeconomic Profile of Workers in Traditional and Modern Industries

The objective of this study is to assess the changes that have been taking place in the socio-economic profile of organized industrial workers of Kerala in the context of the changes that have been taking place in the state's industrial structure. with this object in view, the study seeks to find out the similarities and differences in the profile of workers belonging to two Segments of factory sector industries in Kerala viz., modern and traditional segments. It also seeks to examine the factors leading to the differences in profile, if any, and their consequences. As noted earlier, the profile of workers may be influenced both by external societal factors and by internal factors like the difference in industrial structure and the technologies used. It is proposed to assess the relative importance of these two groups of factors. In drawing up the profile, we seek to find out whether the workers belonging to the organised sector of industry in Kerala particularly the more modern sector have begun to form a ‘select group‘ in the Kerala society and the total work force. Wherever possible, it is proposed to compare the profile of the Kerala workers with those of workers in other states of India. As an incidental objective, it is also proposed to find out to the extent possible, whether trends towards labour embourgeoisement and class shifting have begun to set in among the industrial workers of Kerala, particularly among the workers in the modern industries as a result of their relative affluence and their middle class socioeconomic background. besides, the study seeks to find out whether there is any difference in the class consciousness of workers belonging to these two segments of organized industry, arising from the differences in their economic status and social background.

Paper industry in Kerala: An evaluation of labour absorption,capacity utilisation, and environmental pollution

Paper industry is one of the oldest and largest industries in Kerala. Despite the developments in the industry in terms of growth in output , value added and employment generation, many of the units face grave problems. Irrespective of the size of the plant, the problems of the industry are general in nature. The problems are galore in the supply, not the demand side. Amomg the problems, the important ones are: raw material scarcity, energy deficiency and obsolete technology. Further, the industry is subject to many controls by the Government — price control, product control and raw materials control — which result in the dwindling of profits and investments. Equally important are the reservations against the industry for polluting the environment byeffluent disposal on the one hand and affecting ecological balance by depleting the existing forest on the other. Apart from the large, medium and small pulp and paper mills, there are about 30 hand made paper units in Kerala which can be categorised as village and cottage industry. Almost all of these units began at the initiative and support of Khadi and Village Industries Commission. The primary purpose of these units is employment generation, and not profit making. Currently many of these units are in the red and many others are on the verge of closure. Therefore, a separate analysis of the growth performance, and problems and prospects of the hand made paper industry has also been attempted. It is analysed separately because of the very small size of the hand made paper units

Industrial Laws In Transnational Corporations And Their Impact On The Economic Conditions Of Labour: Acase Study Of Pharmaceutical Industry In India

This study proposes to verify the hypothesis relating to labour legislation in the industrial sector.Here there are as many as fifty enacments of the central government alone.These legislations indicating the growth of this branch of law over a period of more than half a centuary cover a wide spectrum of interests of workers both individuals and collective in different areas of employment.However this study relates mainly to a)trade unions act,b)industrial employment c)industrial disputes.

Influence of the buffer environment on the Relative Biological Effectiveness of carbon ion radiation, investigated by Scanning Force Microscopy and gel electrophoresis

This work focuses on the analysis of the influence of environment on the relative biological effectiveness (RBE) of carbon ions on molecular level. Due to the high relevance of RBE for medical applications, such as tumor therapy, and radiation protection in space, DNA damages have been investigated in order to understand the biological efficiency of heavy ion radiation. The contribution of this study to the radiobiology research consists in the analysis of plasmid DNA damages induced by carbon ion radiation in biochemical buffer environments, as well as in the calculation of the RBE of carbon ions on DNA level by mean of scanning force microscopy (SFM). In order to study the DNA damages, besides the common electrophoresis method, a new approach has been developed by using SFM. The latter method allows direct visualisation and measurement of individual DNA fragments with an accuracy of several nanometres. In addition, comparison of the results obtained by SFM and agarose gel electrophoresis methods has been performed in the present study. Sparsely ionising radiation, such as X-rays, and densely ionising radiation, such as carbon ions, have been used to irradiate plasmid DNA in trishydroxymethylaminomethane (Tris buffer) and 4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid (HEPES buffer) environments. These buffer environments exhibit different scavenging capacities for hydroxyl radical (HO0), which is produced by ionisation of water and plays the major role in the indirect DNA damage processes. Fragment distributions have been measured by SFM over a large length range, and as expected, a significantly higher degree of DNA damages was observed for increasing dose. Also a higher amount of double-strand breaks (DSBs) was observed after irradiation with carbon ions compared to X-ray irradiation. The results obtained from SFM measurements show that both types of radiation induce multiple fragmentation of the plasmid DNA in the dose range from D = 250 Gy to D = 1500 Gy. Using Tris environments at two different concentrations, a decrease of the relative biological effectiveness with the rise of Tris concentration was observed. This demonstrates the radioprotective behavior of the Tris buffer solution. In contrast, a lower scavenging capacity for all other free radicals and ions, produced by the ionisation of water, was registered in the case of HEPES buffer compared to Tris solution. This is reflected in the higher RBE values deduced from SFM and gel electrophoresis measurements after irradiation of the plasmid DNA in 20 mM HEPES environment compared to 92 mM Tris solution. These results show that HEPES and Tris environments play a major role on preventing the indirect DNA damages induced by ionising radiation and on the relative biological effectiveness of heavy ion radiation. In general, the RBE calculated from the SFM measurements presents higher values compared to gel electrophoresis data, for plasmids irradiated in all environments. Using a large set of data, obtained from the SFM measurements, it was possible to calculate the survive rate over a larger range, from 88% to 98%, while for gel electrophoresis measurements the survive rates have been calculated only for values between 96% and 99%. While the gel electrophoresis measurements provide information only about the percentage of plasmids DNA that suffered a single DSB, SFM can count the small plasmid fragments produced by multiple DSBs induced in a single plasmid. Consequently, SFM generates more detailed information regarding the amount of the induced DSBs compared to gel electrophoresis, and therefore, RBE can be calculated with more accuracy. Thus, SFM has been proven to be a more precise method to characterize on molecular level the DNA damage induced by ionizing radiations.

The Containment of Labour Unrest in the Post Socialist China

Due to its transition from the socialist mode of production to the capitalist mode, workers in China have been exposed to the exploitative class relations that they hardly experienced before. The working class is now assuming a subordinate position in the relations of production while the capitalist class remains in the dominant position. As a consequence, workers’ protests are constantly emerging and class conflicts are exacerbating in the contemporary China. I have set out to study in this paper how the party-state in China contains labour unrest through the All China Federation of Trade Unions (the ACFTU), which I argue is a state apparatus that performs the ideological, political and economic functions in different situations. There has been an ongoing academic debate on if the ACFTU is defending workers’ interests. Some scholars have expressed optimism while some have taken a dim view. Drawing on Poulantzas’ theory of capitalist state, I hope to make contribution to this debate by demonstrating that the ACFTU is under some circumstances serving the short term interests of workers as individuals, but not the economic and political interests of workers as a class. Instead of organizing workers to overcome the effects of isolation or forming a class for itself, the ACFTU attempts to contain labour unrest and reproduce their subordination in the relations of production.

"Schwarzer Untertan versus schwarzer Bruder". Bernhard Dernburgs Reformen in den Kolonien Deutsch-Ostafrika, Deutsch-Südwestafrika, Togo und Kamerun

Nachdem sich in der Kolonialkrise von 1906 das Scheitern der ersten Periode deutscher Kolonialherrschaft (1885-1906) offenbarte, wurde Bernhard Dernburg die grundlegende Reorganisation der Kolonialpolitik anvertraut. Als Mann aus der Welt der Banken und Finanzen sollte er die stagnierende Entwicklung der Kolonien mit Hilfe von administrativen und wirtschaftlichen Reformmaßnahmen vorantreiben und gleichzeitig der indigenen Bevölkerung eine humane Behandlung zu garantieren. Um diese Ziele zu erreichen, verabschiedete er Reformen, die eine Rationalisierung und Humanisierung der Arbeiterpolitik vorsahen. Sowohl in der zeitgenössischen Literatur als auch in der aktuellen wissenschaftlichen Forschung wird der Amtsantritt Bernhard Dernburgs zum Leiter der Kolonialabteilung im Jahre 1906 als der „Beginn einer neuen humanen Ära“ deutscher Kolonialpolitik oder als „Wandel zum Besseren“ bezeichnet. Die Dissertation „Schwarzer Untertan versus Schwarzer Bruder. Bernhard Dernburgs Reformen in den Kolonien Deutsch-Ostafrika, Deutsch-Südwestafrika, Togo und Kamerun“ untersucht die Intention, Akzeptanz, Umsetzung und Auswirkung der reformatorischen Eingeborenenpolitik und klärt, ob die Beurteilung der Ära Dernburg (1906-1910) in der zeitgenössischen und aktuellen Forschung eine Berechtigung hat. Obwohl zumindest in der Theorie sein Konzept einer rationalen und humanen Kolonialpolitik sicherlich eine Abkehr von der bisher betriebenen Kolonialpolitik bedeutete, zeigt sich jedoch bei der Umsetzung der Reformen eine deutliche Diskrepanz zwischen Intention und Realität. Auch wenn zumindest die Bestrebung Dernburgs zur Verrechtlichung der indigenen Arbeitsverhältnisse gewürdigt werden sollte, so muss doch konstatiert werden, dass es in der „Ära Dernburg“ definitiv nicht zu einer grundlegenden Verbesserung der indigenen Lebenssituation in den deutschen Kolonien kam. Im Gegenteil, die Dernburgsche Reformpolitik beschleunigte vielmehr den Verelendungsprozess der indigenen Bevölkerung. In allen afrikanischen Kolonien verschlechterten sich mit der Intensivierung der Verwaltung die sozialen und menschlichen Beziehungen zwischen Afrikanern und Europäern. Vieles von dem, was Dernburg in seinem Programm propagierte, konnte nicht erreicht werden. Zwar führte Dernburg in Deutsch-Ostafrika, Deutsch-Südwestafrika und in Kamerun eine rechtlich bindende Arbeiterverordnung ein, jedoch unterschieden sich die Bestimmungen zum Teil erheblich voneinander, so dass von einer einheitlichen Modernisierung des kolonialen Arbeitsrechts nicht die Rede sein kann. Viele arbeitsrechtliche Bereiche, wie z.B. die Arbeiteranwerbung, Lohnzahlung, Minderjährigenschutz, Vertragsdauer, Arbeitszeit, Verpflegung und Unterkunft wurden nur unzureichend geregelt. Ähnlich negativ muss auch die Reformierung der Strafrechtspflege bewertet werden. Die Kodifizierung eines Eingeborenenstrafrechts scheiterte sowohl am Widerstand der lokalen Verwaltung als auch am Grundkonsens der Rechtmäßigkeit einer Rassenjustiz. Kolonialpolitik war auch in der „Ära Dernburg“ nichts anderes als „rohe Ausbeutungspolitik“, die zur Lösung der Arbeiterfrage beitragen sollte. Aber gerade hier, bei der Mobilisierung von afrikanischen Lohnarbeitern, war der Kolonialstaatssekretär nicht etwa mit einer „Arbeiterfürsorgepolitik“, sondern mit der Fortführung der Enteignungs- und Zwangsmaßnahmen erfolgreich gewesen. Insgesamt ist ein deutlicher Anstieg an afrikanischen Arbeitern in europäischen Unternehmen zu verzeichnen, was darauf schließen lässt, dass Dernburgs Verordnungen einen günstigen Einfluss auf die Arbeiterfrage ausgeübt haben. Obwohl nicht von einem grundlegenden Neuanfang der Kolonialpolitik gesprochen werden kann, sollte ebenso wenig bezweifelt werden, dass sich die deutsche Kolonialpolitik nicht unter Dernburg veränderte. Größere indigene Aufstände und Unruhen blieben aus, so dass während seiner Amtszeit eine systematische wirtschaftliche Erschließung der Kolonien beginnen konnte.