A novel bogie design made of glass fibre reinforced plastic

This paper presents a completely new design of a bogie-frame made of glass fibre reinforced composites and its performance under various loading conditions predicted by finite element analysis. The bogie consists of two frames, with one placed on top of the other, and two axle ties connecting the axles. Each frame consists of two side arms and a transom between. The top frame is thinner and more compliant and has a higher curvature compared with the bottom frame. Variable vertical stiffness can be achieved before and after the contact between the two frames at the central section of the bogie to cope with different load levels. Finite element analysis played a very important role in the design of this structure. Stiffness and stress levels of the full scale bogie presented in this paper under various loading conditions have been predicted by using Marc provided by MSC Software. In order to verify the finite element analysis (FEA) models, a fifth scale prototype of the bogie has been made and tested under quasi-static loading conditions. Results of testing on the fifth scale bogie have been used to fine tune details like contact and friction in the fifth scale FEA models. These conditions were then applied to the full scale models. Finite element analysis results show that the stress levels in all directions are low compared with material strengths.

Modelling the structure of a polymer glass poly(methylmethacrylate) through neutron scattering experiments

Determination of the local structure of a polymer glass by scattering methods is complex due to the number of spatial and orientational correlations, both from within the polymer chain (intrachain) and between neighbouring chains (interchain), from which the scattering arises. Recently considerable advances have been made in the structural analysis of relatively simple polymers such as poly(ethylene) through the use of broad Q neutron scattering data tightly coupled to atomistic modelling procedures. This paper presents the results of an investigation into the use of these procedures for the analysis of the local structure of a-PMMA which is chemically more complex with a much greater number of intrachain structural parameters. We have utilised high quality neutron scattering data obtained using SANDALS at ISIS coupled with computer models representing both the single chain and bulk polymer system. Several different modelling approaches have been explored which encompass such techniques as Reverse Monte Carlo refinement and energy minimisation and their relative merits and successes are discussed. These different approaches highlight structural parameters which any realistic model of glassy atactic PMMA must replicate.

Islamic mutual funds' financial performance and international investment style: evidence from 20 countries

We pursue the first large-scale investigation of a strongly growing mutual fund type: Islamic funds. Based on an unexplored, survivorship bias-adjusted data set, we analyse the financial performance and investment style of 265 Islamic equity funds from 20 countries. As Islamic funds often have diverse investment regions, we develop a (conditional) three-level Carhart model to simultaneously control for exposure to different national, regional and global equity markets and investment styles. Consistent with recent evidence for conventional funds, we find Islamic funds to display superior learning in more developed Islamic financial markets. While Islamic funds from these markets are competitive to international equity benchmarks, funds from especially Western nations with less Islamic assets tend to significantly underperform. Islamic funds’ investment style is somewhat tilted towards growth stocks. Funds from predominantly Muslim economies also show a clear small cap preference. These results are consistent over time and robust to time varying market exposures and capital market restrictions.

How Islamic is al-Qaeda? The politics of Pan-Islam and the challenge of modernisation

This article investigates the contested ideology of al-Qaeda through an analysis of Osama bin Ladin’s writings and public statements issued between 1994 and 2011, set in relation to the development of Islamic thought and changing socio-political realities in the late nineteenth and twentieth centuries. Challenging popular conceptions of Wahhabism and the “Salafi jihad”, it reveals an idealistic, Pan-Islamic sentiment at the core of his messages that is not based on the main schools of Islamic theology, but is the result of a crisis of meaning of Islam in the modern world. Both before and after the death of al-Qaeda’s iconic leader, the continuing process of religious, political and intellectual fragmentation of the Muslim world has led to bin Ladin’s vision for unity being replaced by local factions and individuals pursuing their own agendas in the name of al-Qaeda and Islam.

Spiritual capital: the co-evolution of an ethical framework based on Abrahamic religious values in the Islamic tradition

Purpose – The aim of this paper is to investigate how values from within Abrahamic religions could be adopted to improve liberal market economies’ (LMEs’) corporate governance business practices. Design/methodology/approach – The concept of spiritual capitalism is explained from an Islamic perspective by adopting three universal Abrahamic values to critically analyse LMEs and offer an ethical alternative to current capitalism concerns. Findings – It is found that LMEs can be improved by considering all stakeholders, putting ethics before economics, and introducing shared risk/reward plus lower debt. Originality/value – The paper compares LMEs/Co-ordinated market economies (CMEs)/Islamic countries economies (ICEs) within an ethical framework for LMEs.

A review of Islamic mutual funds’ financial performance and investment style in Muslim and non-Muslim countries

Islamic finance has grown beyond its reputation of providing small-scale banking options and now provides investment and financing options for complex large-scale commercial transactions. Islamic investments are one area that has attracted the attention of investors due to its performance, especially during the economic downturn. The Shari’ah compliance nature of Islamic funds provides an opportunity for those Muslim investors to be part of the global investment sector who have previously been reluctant to invest in conventional mutual funds. The fact that the funds’ managers are prohibited from investing in activities such as weapons production, alcohol production and interest-bearing finance operations, makes Islamic mutual funds also attractive for those Non-Muslim investors who wish to invest ethically. Today there are hundreds of Islamic equity indices offered by Dow Jones, FTSE, MSCI and S&P. Despite the growing importance of Islamic funds, there have been limited studies exploring the performance of Islamic funds worldwide. Due to very limited data sets and not too rigorous analytical methods, these existent studies have neither investigated Islamic funds’ financial performance in noticeable detail nor analysed the investment style of more than six funds. For instance, relevant questions such as the financial performance of Islamic mutual funds’ beyond their investment styles or a difference in performance between funds from Muslim and non-Muslim countries have nearly not been investigated at all. Very recently, a study by Hoepner, Rammal and Rezec (2011) analysed the financial performance and investment style of 262 Islamic equity funds from 20 countries in five regions (Africa, Asia-Pacific, Europe, Gulf Cooperative Council-GCC, and North America). As comparison, previous studies did not even analyse 60 funds. Hoepner et al.’s study sampled a period of two decades and was therefore able to test the performance of the funds during economic booms as well as economic downturns. The findings of the study provide new insights into the performance of Islamic mutual funds in Muslim and Western markets and during financial crisis.

Osteoconductivity of modified fluorcanasite glass-ceramics for bone tissue augmentation and repair

Modified fluorcanasite glasses were fabricated by either altering the molar ratios of Na(2)O and CaO or by adding P(2)O(5) to the parent stoichiometric glass compositions. Glasses were converted to glass-ceramics by a controlled two-stage heat treatment process. Rods (2 mm x 4 mm) were produced using the conventional lost-wax casting technique. Osteoconductive 45S5 bioglass was used as a reference material. Biocompatibility and osteoconductivity were investigated by implantation into healing defects (2 mm) in the midshaft of rabbit femora. Tissue response was investigated using conventional histology and scanning electron microscopy. Histological and histomorphometric evaluation of specimens after 12 weeks implantation showed significantly more bone contact with the surface of 45S5 bioglass implants when compared with other test materials. When the bone contact for each material was compared between experimental time points, the Glass-Ceramic 2 (CaO rich) group showed significant difference (p = 0.027) at 4 weeks, but no direct contact at 12 weeks. Histology and backscattered electron photomicrographs showed that modified fluorcanasite glass-ceramic implants had greater osteoconductivity than the parent stoichiometric composition. Of the new materials, fluorcanasite glass-ceramic implants modified by the addition of P(2)O(5) showed the greatest stimulation of new mineralized bone tissue formation adjacent to the implants after 4 and 12 weeks implantation. (C) 2010 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 94A: 760-768, 2010

In vitro osteogenesis on fluorcanasite glass-ceramic with three different chemical compositions

This study aimed at investigating in vitro osteogenesis on three fluorcanasite glass-ceramic compositions with different solubilities (K3, K5, and K8). Osteoblastic cells were obtained from human alveolar bone fragments and cultured under standard osteogenic condition until subconfluence. First passage cells were cultured on K3, K5, and K8 and on Bioglass (R) 45S5 (45S5-control). Cell adhesion was evaluated at 24 h. For proliferation and viability, cells were cultured for 1, 4, and 10 days. Total protein content and alkaline phosphatase (ALP) activity were measured at 7, 14, and 21 days. Cultures were stained with Alizarin red at 21 days, for detection of mineralized matrix. Data were compared by ANOVA followed by Duncan`s test. Cell adhesion, cell proliferation, viability, total protein content, and ALP activity were not affected by fluorcanasite glass-ceramic composition and solubility. Bone-like formation was similar on all fluorcanasite-glass ceramics and was reduced compared to 45S5. The changes in the chemical composition and consequently solubility of the fluorcanasite glass-ceramics tested here did not significantly alter the in vitro osteogenesis. Further modifications of the chemical composition of the fluorcanasite glass-ceramic would be required to improve bone response, making this biomaterial a good candidate to be employed as a bone substitute.

Bond strength of fibre glass and carbon fibre posts to the root canal walls using different resin cements

The aim of the study was to evaluate the bond strength of fibre glass and carbon fibre posts in the root canal walls cemented with self-adhesive (RelyX-Unicem) and chemical (Cement-Post) resin cements. Forty maxillary canines were divided into four groups according to the cement and post used and submitted to the push-out test (0.5 mm min(-1)). The data were submitted to statistical analysis (2-way ANOVA, Bonferroni - P < 0.05) and fracture analysis by Scanning Electronic Microscopy. Fibre glass presented the best results when cemented with RelyX-Unicem and Cement-Post (P < 0.05). RelyX-Unicem presented the highest bond strength values for both posts (P < 0.05). Fracture analysis showed predominance of cohesive fracture of post for RelyX-Unicem and adhesive fracture between dentin/cement and mixed for Cement-Post. The bond strength values were significantly affected by the type of post and cement used and the highest values were found for fibre glass posts and RelyX-Unicem.