Effect of La/Ce ratio on the structure and electrochemical characteristics of La0.7-xCexMg0.3Ni2.8Co0.5 (x=0. 1-0.5) hydrogen storage alloys

The effect of La/Ce ratio on the structure and electrochemical characteristics of the La0.7-xCexMg0.3Ni2.8Co0.5 (x = 0.1, 0.2, 0.3, 0.4, 0.5) alloys has been studied systematically. The result of the Rietveld analyses shows that, except for small amount of impurity phases including LaNi and LaNi2, all these alloys mainly consist of two phases: the La(La, Mg)(2)Ni-9 phase with the rhombohedral PuNi3-type structure and the LaNi5 phase with the hexagonal CaCU5-type structure. The abundance of the La(La, Mg)(2)Ni-9 phase decreases with increasing cerium content whereas the LaNi5 phase increases with increasing Ce content, moreover, both the a and cell volumes of the two phases decrease with the increase of Ce content. The maximum discharge capacity decreases from 367.5 mAh g(-1) (x = 0.1) to 68.3 mAh g(-1) (x = 0.5) but the cycling life gradually improve. As the discharge current density is 1200 mA g(-1), the HRD increases from 55.4% (x = 0.1) to 67.5% (x = 0.3) and then decreases to 52.1% (x = 0.5). The cell volume reduction with increasing x is detrimental to hydrogen diffusion D and accordingly decreases the low temperature dischargeability of the La0.7-xCexMg0.3Ni2.8Co0.5 (x = 0.1-0.5) alloy electrodes.

在镍系钙钛石型催化剂上的氨氧化 Ⅰ.催化剂La_(1-x)Sr_xNiO_(3-λ)的结构与催化性能

研究了La_(1-1·333X)Th_XNiO_(3-λ)(0≤x≤0.75)催化剂的固态性质与催化氢氧化性能的关系。发现在LaNiO_3中掺入Th~(4+)能形成阳离子空位,稳定体系中Ni~(3+)浓度和降低氧空位的有序化程度,从而提高了催化剂的NO选择性。氨氧化制硝酸的主要活性氧种可能是定位在氧空位上的O~-离子。催化机理遵从Redox机理,阳离子空位的形成有利于Redox过程的进行。

含Eu~(3+)复合钛钽氧化物的研究

研究了TiO_2-Ta_2O_5-Li_2O:Eu~3+体系,当化学通式为Ti_(1-4x-y)Ta_(3x)Li_xO_2:Eu_y~(3+),在0.1≤y≤0.25,0.05

在镍系钙钛石型催化剂上的氨氧化 Ⅰ.催化剂La_(1-1.333x)Th_xNiO_(3-λ)的结构与催化性能

研究了La_(1-1·333X)Th_XNiO_(3-λ)(0≤x≤0.75)催化剂的固态性质与催化氢氧化性能的关系。发现在LaNiO_3中掺入Th~(4+)能形成阳离子空位,稳定体系中Ni~(3+)浓度和降低氧空位的有序化程度,从而提高了催化剂的NO选择性。氨氧化制硝酸的主要活性氧种可能是定位在氧空位上的O~-离子。催化机理遵从Redox机理,阳离子空位的形成有利于Redox过程的进行。

YAG:Er~(3+)激光晶体中Er~(3+)红外波段的荧光发射

YAG:Er~(3+)晶体中Er~(3+)在红外新波段所谓“大气窗口”的激光发射,由于具有优异性能,研究此材料者日益增多。但红外波段荧光光谱除有局部的报导外,尚无系统报导,近年来我们对0.80—3.00μm波段的Er~(3+)离子的荧光光谱,进行了较详细的研究,并获得了较为满意的结果。这些结果,对从事YAG:Er~(3+)材料和器件的工作者,无疑是较为有益的参考

稀土在无机微孔材料中的荧光光谱及规律 Ⅰ.Eu~(3+)在沸石基质中的光谱特性

本文研究了经水溶液离子交换掺杂EU~(3+)的NaY,NaX和NaA沸石的光谱特性。讨论了焙烧脱水过程中Eu~(3+)在沸石笼结构中的定位对其光谱结构的影响。实验表明,在同一焙烧温度下,Eu~(3+)在NaY、NaX和NaA三种基质中的电偶极跃迁和磁偶极跃迁的发射强度比值依次增大。通过激发光谱和光电子能谱考察了Eu~(3+)在沸石体系中与骨架氧的键合作用。Eu~(3+)掺杂浓度在0.95～10.5％范围内仍未观察到浓度浓灭现象。

Ho~(3+):Gd_3Ga_5O_(12)晶体的光谱性质及强度参数

本文详细地研究了Ho~(3+):Gd_3Ga_5O_(12)(以下简称Ho~(3+):GGG)中Ho~(3+)离子在0.5～3.0μm波段内的室温及77K温度下的荧光光谱。根据Judd—Ofelt理论,计算了Ho~(3+)离子的自发辐射电偶跃迁几率与辐射寿命等光谱强度参数。

海洋聚磷菌Halomonas YSR-3的除磷特性研究

本论文报道从海洋中分离到的一株聚磷菌的分离、鉴定、在系统发育中的地位、除磷特性、菌体内多磷酸盐颗粒的研究、D-海因酶和核苷二磷酸激酶基因的克隆及序列分析，为海水系统的生物除磷提供部分基础资料。 从黄海海域分离到聚磷菌Halomonas sp. YSR-3，菌体呈杆状，大小为3.5 μm×1 μm，革兰氏阴性，好氧生长，能运动。透射电镜观察发现，菌体内有致密颗粒。经DAPI染色确定该致密颗粒是多磷酸盐，亦可称为异染粒、迂回体。16S rDNA鉴定结果表明，YSR-3与Halomonas属中的marine bacterium B5-7有较高的同源性，相似值99%。YSR-3的生理生化特性：对氯霉素和卡那霉素敏感；淀粉水解呈阳性；反硝化和几丁质降解呈阴性；能将葡萄糖作为唯一碳源和能源。 对YSR-3的培养条件进行优化。以海水2216培养基、24 ℃、180 rpm、pH 6.5的条件培养，更利于菌体生长和菌体内多磷酸盐的形成。 对YSR-3的除磷特性进行研究。无磷培养时，菌体不能生长；用磷酸钾盐作为磷源时，菌体生长较好，形成多磷酸盐的菌体比例较高；较适合YSR-3菌体生长和多磷酸盐形成的磷源是KH2PO4，较适磷浓度为1.5 mmol/L。pH的变化影响菌株的生长、多磷酸盐形成和除磷效果。pH值为5时，菌体的数量几乎不增加，体内多磷酸盐和培养基中磷含量变化不大；pH值为6、7和8时，菌体生长良好，95%以上的菌体内形成多磷酸盐，培养基中磷含量明显下降。YSR-3在不同培养基中除磷量和除磷率不同。在高磷培养基中除磷量为0.7 mmol/L(磷含量由1.84 mmol/L降到1.14 mmol/L)，除磷率为37.5%；在低磷培养基中除磷量为0.02 mmol/L(磷含量由0.028 mmol/L降到0.008 mmol/L)，除磷率为72.2%。 以海洋聚磷菌Halomonas sp. YSR-3的总DNA为模板，用PCR法扩增D-海因酶基因和核苷二磷酸激酶基因，将扩增片段克隆到pGM-T载体，转化E.coli TOP10菌株，经蓝白斑筛选、菌落PCR得到阳性克隆，测序后对序列进行Blast比对分析。得到的D-海因酶基因序列长度为1510 bp，与Pseudomonas entomophila L48的海因酶基因序列的相似性为77%。翻译后的序列与Pseudomonas fluorescens Pf-5，Marinomonas sp. MED121，Burkholderia vietnamiensis G4的海因酶蛋白序列相似性分别为75%，73%，70%。得到的核苷二磷酸激酶基因序列长度为420bp，翻译后的序列与Loktanella vestfoldensis SKA53，Jannaschia sp. CCS1，Roseobacter sp. CCS2的核苷二磷酸激酶蛋白序列相似性分别为89%，86%，85%。 聚磷菌能将外界环境中的磷吸收到体内，并以多磷酸盐的形式储存。多磷酸盐对于细胞的生存和生长有很重要的作用，但目前对于多磷酸盐的形成过程以及过程调控还不是很清楚。在今后可以通过构建高效表达的重组菌，提高与除磷相关的酶的纯度及活性。同时可以将相关酶的基因进行突变，对基因表达的调控以及酶的代谢以及功能结构等多方面进行基础研究，使聚磷菌在生物除磷中得到广泛应用。

HPLC测定刺芒龙胆不同部位中3种有效成分的含量

目的：建立反相高效液相色谱法同时测定刺芒龙胆植物不同部位落干酸、獐牙菜苦苷、龙胆苦苷的含量。方法：采用ZORBAX SB-C18（250mm×4．6mm，5μm）色谱柱，流动相为甲醇-水（含0．04％磷酸）的比例25：75，流速1mL·min^-1，检测波长238nm，柱温30℃。结果：3种成分均达到基线分离，落干酸、獐牙莱苦苷、龙胆苦苷的线性范围分别为0．039～1．56μg（r=0．9998），0．0725～1．45μg（r=0．9999），0．061～1．225μg（r=0．9997）；回收率为101．3％（RSD=2．6％），98．7％（RSD=3．1％，99．6％（RSD=1．2％）。结论：测定方法快速，结果准确、可靠。

Evaluation of a national evidence-based health care course via teleconference in a developing country

Rationale, aims and objectives Continuing health education is essential but challenged. in 2006, the Brazilian Cochrane Center, in collaboration with the Ministry of Health, launched a mass teaching initiative in evidence-based health care (EBH) for public-sector professionals via teleconferencing. This 152-hour, interactive EBH course has enrolled over 4500 professionals. This study aimed to assess the acquisition EBH knowledge and skills, as well as the attitudes and perceptions of a sample of students enrolled in the 2009 course via teleconferencing.Methods This prospective cohort study analyzed three aspects of this 152-hour EBH course that recruited 1040 volunteer participants, all public health sector employees working in 131 different hospitals or health agencies. Pre- and post-course tests using a modified version of the Berlin questionnaire with 20 multiple-choice questions were used to examine knowledge acquisition in a sample of 297 students. Tests were completed upon registration and at course completion. the research projects submitted by 872 participants were evaluated to assess skill acquisition. Answers to an anonymous survey assessed the attitudes and perceptions of 914 participants.Results There was a significant increase in knowledge from baseline to course completion (mean scores 8.2 +/- 3.3 versus 13.7 +/- 3.0, P < 0.001). Over 90% of the research projects were judged to be of adequate quality (appropriate rationale for the study, well-formulated research question and feasible execution); over 95% of the participants were satisfied with the course.Conclusion the Brazilian EBH course via teleconference improved the knowledge and skills of public-sector health professionals and was approved by the vast majority of students.

Cuaderno de diseño e informe final. Regional Santa Fe de Bogotá, evaluación de productos y asesorías puntuales gestión de producción, gestión oficina de diseño y actividades.

150 hojas.

ACOUSTO-OPTIC IMAGING IN DIFFUSE MEDIA USING PULSED ULTRASOUND AND THE PHOTOREFRACTIVE EFFECT

Acousto-optic imaging (AOI) in optically diffuse media is a hybrid imaging modality in which a focused ultrasound beam is used to locally phase modulate light inside of turbid media. The modulated optical field carries with it information about the optical properties in the region where the light and sound interact. The motivation for the development of AOI systems is to measure optical properties at large depths within biological tissue with high spatial resolution. A photorefractive crystal (PRC) based interferometry system is developed for the detection of phase modulated light in AOI applications. Two-wave mixing in the PRC creates a reference beam that is wavefront matched to the modulated optical field collected from the specimen. The phase modulation is converted to an intensity modulation at the optical detector when these two fields interfere. The interferometer has a high optical etendue, making it well suited for AOI where the scattered light levels are typically low. A theoretical model for the detection of acoustically induced phase modulation in turbid media using PRC based interferometry is detailed. An AOI system, using a single element focused ultrasound transducer to pump the AO interaction and the PRC based detection system, is fabricated and tested on tissue mimicking phantoms. It is found that the system has sufficient sensitivity to detect broadband AO signals generated using pulsed ultrasound, allowing for AOI at low time averaged ultrasound output levels. The spatial resolution of the AO imaging system is studied as a function of the ultrasound pulse parameters. A theoretical model of light propagation in turbid media is used to explore the dependence of the AO response on the experimental geometry, light collection aperture, and target optical properties. Finally, a multimodal imaging system combining pulsed AOI and conventional B- mode ultrasound imaging is developed. B-mode ultrasound and AO images of targets embedded in both highly diffuse phantoms and biological tissue ex vivo are obtained, and millimeter resolution is demonstrated in three dimensions. The AO images are intrinsically co-registered with the B-mode ultrasound images. The results suggest that AOI can be used to supplement conventional B-mode ultrasound imaging with optical information.

IDENTIFYING AND MONITORING THE ROLES OF CAVITATION IN HEATING FROM HIGH-INTENSITY FOCUSED ULTRASOUND

For high-intensity focused ultrasound (HIFU) to continue to gain acceptance for cancer treatment it is necessary to understand how the applied ultrasound interacts with gas trapped in the tissue. The presence of bubbles in the target location have been thought to be responsible for shielding the incoming pressure and increasing local heat deposition due to the bubble dynamics. We lack adequate tools for monitoring the cavitation process, due to both limited visualization methods and understanding of the underlying physics. The goal of this project was to elucidate the role of inertial cavitation in HIFU exposures in the hope of applying noise diagnostics to monitor cavitation activity and control HIFU-induced cavitation in a beneficial manner. A number of approaches were taken to understand the relationship between inertial cavitation signals, bubble heating, and bubble shielding in agar-graphite tissue phantoms. Passive cavitation detection (PCD) techniques were employed to detect inertial bubble collapses while the temperature was monitored with an embedded thermocouple. Results indicate that the broadband noise amplitude is correlated to bubble-enhanced heating. Monitoring inertial cavitation at multiple positions throughout the focal region demonstrated that bubble activity increased prefocally as it diminished near the focus. Lowering the HIFU duty cycle had the effect of maintaining a more or less constant cavitation signal, suggesting the shielding effect diminished when the bubbles had a chance to dissolve during the HIFU off-time. Modeling the effect of increasing the ambient temperature showed that bubbles do not collapse as violently at higher temperatures due to increased vapor pressure inside the bubble. Our conclusion is that inertial cavitation heating is less effective at higher temperatures and bubble shielding is involved in shifting energy deposition at the focus. The use of a diagnostic ultrasound imaging system as a PCD array was explored. Filtering out the scattered harmonics from the received RF signals resulted in a spatially- resolved inertial cavitation signal, while the amplitude of the harmonics showed a correlation with temperatures approaching the onset of boiling. The result is a new tool for detecting a broader spectrum of bubble activity and thus enhancing HIFU treatment visualization and feedback.

Capillary electrophoresis with boron doped diamond electrode for amperometric detection of low molecular weight biological substrate

The research work in this thesis included the sensitive and selective separation of biological substance by capillary electrophoresis with a boron doped diamond electrode for amperometric detection. Chapter 1 introduced the capillary electrophoresis and electrochemical detection. It included the different modes of capillary electrophoresis, polyelectrolyte multilayers coating for open tubular capillary electrochromatography, different modes of electrochemical detection and carbon based electrodes. Chapter 2 showed the synthesized and electropolymerized N-acetyltyramine with a negatively charged sulfobutylether-β-cyclodextrin on a boron doped diamond (BDD) electrode followed by the electropolymerzation of pyrrole to form a stable and permselective film for selective dopamine detection. For comparison, a glassy carbon (GC) electrode with a combined electropolymerized permselective film of polytyramine and polypyrrole-1-propionic acid was used for selective detection of dopamine. The detection limit of dopamine was improved from 100 nM at a GC electrode to 5 nM at a BDD electrode. Chapter 3 showed field-amplified sample stacking using a fused silica capillary coated with gold nanoparticles embedded in poly(diallyldimethylammonium) chloride, which has been investigated for the electrophoretic separation of indoxyl sulphate, homovanillic acid and vanillylmandelic acid. The detection limit of the three analytes obtained by using a boron doped diamond electrode was around 75 nM, which was significantly below their normal physiological levels in biological fluids. This combined separation and detection scheme was applied to the direct analysis of these analytes and other interfereing chemicals including uric and ascorbic acids in urine samples without off-line sample treatment or preconcentration. Chapter 4 showed the selective detection of Pseudomonas Quinolone Signal, PQS for quorum sensing from its precursor HHQ, using a simply boron doped diamond electrode. Furthermore, by combining poly(diallyldimethylammonium) chloride modified fused silica capillary with a BDD electrode for amperometric detection, PQS was separated from HHQ and other analogues. The detection limit of PQS was as low as 65 nM. Different P. aeruginosa mutant strains were studied. Chapter 5 showed the separation of aminothiols by layer-by-layer coating of silica capillary with a boron doped diamond electrode. The capillary was layer-by-layer coated with the polycation poly(diallyldimethylammonium) chloride and negatively charged silica nanoparticles. All the aminothiols was separated and detected using a BDD electrode in an acidic electrolyte. It was a novel scheme for the separation and detection of glutathione reduced and oxidized forms, which is important for estimated overstressed level in the human system.

An investigation of innovation and knowledge creation in virtual worlds

The Internet and World Wide Web have had, and continue to have, an incredible impact on our civilization. These technologies have radically influenced the way that society is organised and the manner in which people around the world communicate and interact. The structure and function of individual, social, organisational, economic and political life begin to resemble the digital network architectures upon which they are increasingly reliant. It is increasingly difficult to imagine how our ‘offline’ world would look or function without the ‘online’ world; it is becoming less meaningful to distinguish between the ‘actual’ and the ‘virtual’. Thus, the major architectural project of the twenty-first century is to “imagine, build, and enhance an interactive and ever changing cyberspace” (Lévy, 1997, p. 10). Virtual worlds are at the forefront of this evolving digital landscape. Virtual worlds have “critical implications for business, education, social sciences, and our society at large” (Messinger et al., 2009, p. 204). This study focuses on the possibilities of virtual worlds in terms of communication, collaboration, innovation and creativity. The concept of knowledge creation is at the core of this research. The study shows that scholars increasingly recognise that knowledge creation, as a socially enacted process, goes to the very heart of innovation. However, efforts to build upon these insights have struggled to escape the influence of the information processing paradigm of old and have failed to move beyond the persistent but problematic conceptualisation of knowledge creation in terms of tacit and explicit knowledge. Based on these insights, the study leverages extant research to develop the conceptual apparatus necessary to carry out an investigation of innovation and knowledge creation in virtual worlds. The study derives and articulates a set of definitions (of virtual worlds, innovation, knowledge and knowledge creation) to guide research. The study also leverages a number of extant theories in order to develop a preliminary framework to model knowledge creation in virtual worlds. Using a combination of participant observation and six case studies of innovative educational projects in Second Life, the study yields a range of insights into the process of knowledge creation in virtual worlds and into the factors that affect it. The study’s contributions to theory are expressed as a series of propositions and findings and are represented as a revised and empirically grounded theoretical framework of knowledge creation in virtual worlds. These findings highlight the importance of prior related knowledge and intrinsic motivation in terms of shaping and stimulating knowledge creation in virtual worlds. At the same time, they highlight the importance of meta-knowledge (knowledge about knowledge) in terms of guiding the knowledge creation process whilst revealing the diversity of behavioural approaches actually used to create knowledge in virtual worlds and. This theoretical framework is itself one of the chief contributions of the study and the analysis explores how it can be used to guide further research in virtual worlds and on knowledge creation. The study’s contributions to practice are presented as actionable guide to simulate knowledge creation in virtual worlds. This guide utilises a theoretically based classification of four knowledge-creator archetypes (the sage, the lore master, the artisan, and the apprentice) and derives an actionable set of behavioural prescriptions for each archetype. The study concludes with a discussion of the study’s implications in terms of future research.