999 resultados para Intestino delgado - Absorção


Relevância:

20.00% 20.00%

Publicador:

Resumo:

The polymer matrix composite materials are being used on a large scale in the most different industrial fields such as aerospace, automotive, oil, among others, since the industrial perspectives is currently working with materials which have a good mechanical performance at high service life and cost / benefit. Thus, the determination of the mechanical properties is indispensable for the characterization of waste resulting in greater expansion of this type of material. Thus, this work will be obtained three plates laminated with tereftálica polymeric matrix reinforced by a bidirectional woven E-glass and kevlar both industrially made, where the plates are manufactured by manual lamination process (hand lay-up), all laminates have five enhancement layers, the first hybrid laminate will consist of bidirectional woven E-glass fiber, kevlar fiber interspersed with layers, is formed by the second bidirectional woven kevlar fiber at the ends of the laminate (two layers), and in the center the glass fiber fabric (three layers), the third plate is composed of only the bidirectional woven E-glass fiber. Then were prepared specimens (CP) by standard, to determine the mechanical properties of tensile and bending in three points. After fabrication of the specimens, they were immersed in oil and seawater. After that, there was a comparison of the mechanical properties for the test condition in the dry state. Showing that there was a considerable increase in the properties studied because the effect of hybridization in laminates.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A type of macro drainage solution widely used in urban areas with predomi-nance of closed catchments (basins without outlet) is the implementation of detention and infiltration reservoirs (DIR). This type of solution has the main function of storing surface runoff and to promote soil infiltration and, consequently, aquifer recharge. The practice is to avoid floods in the drainage basin low-lying areas. The catchment waterproofing reduces the distributed groundwater recharge in urban areas, as is the case of Natal city, RN. However, the advantage of DIR is to concentrate the runoff and to promote aquifer recharge to an amount that can surpass the distributed natu-ral recharge. In this paper, we proposed studying a small urban drainage catchment, named Experimental Mirassol Watershed (EMW) in Natal, RN, whose outlet is a DIR. The rainfall-runoff transformation processes, water accumulation in DIR and the pro-cess of infiltration and percolation in the soil profile until the free aquifer were mod-eled and, from rainfall event observations, water levels in DIR and free aquifer water level measurements, and also, parameter values determination, it is was enabled to calibrate and modeling these combined processes. The mathematical modeling was carried out from two numerical models. We used the rainfall-runoff model developed by RIGHETTO (2014), and besides, we developed a one-dimensional model to simu-late the soil infiltration, percolation, redistribution soil water and groundwater in a combined system to the reservoir water balance. Continuous simulation was run over a period of eighteen months in time intervals of one minute. The drainage basin was discretized in blocks units as well as street reaches and the soil profile in vertical cells of 2 cm deep to a total depth of 30 m. The generated hydrographs were transformed into inlet volumes to the DIR and then, it was carried out water balance in these time intervals, considering infiltration and percolation of water in the soil profile. As a re-sult, we get to evaluate the storage water process in DIR as well as the infiltration of water, redistribution into the soil and the groundwater aquifer recharge, in continuous temporal simulation. We found that the DIR has good performance to storage excess water drainage and to contribute to the local aquifer recharge process (Aquifer Dunas / Barreiras).

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In the oil industry, natural gas is a vital component of the world energy supply and an important source of hydrocarbons. It is one of the cleanest, safest and most relevant of all energy sources, and helps to meet the world's growing demand for clean energy in the future. With the growing share of natural gas in the Brazil energy matrix, the main purpose of its use has been the supply of electricity by thermal power generation. In the current production process, as in a Natural Gas Processing Unit (NGPU), natural gas undergoes various separation units aimed at producing liquefied natural gas and fuel gas. The latter should be specified to meet the thermal machines specifications. In the case of remote wells, the process of absorption of heavy components aims the match of fuel gas application and thereby is an alternative to increase the energy matrix. Currently, due to the high demand for this raw gas, research and development techniques aimed at adjusting natural gas are studied. Conventional methods employed today, such as physical absorption, show good results. The objective of this dissertation is to evaluate the removal of heavy components of natural gas by absorption. In this research it was used as the absorbent octyl alcohol (1-octanol). The influence of temperature (5 and 40 °C) and flowrate (25 and 50 ml/min) on the absorption process was studied. Absorption capacity expressed by the amount absorbed and kinetic parameters, expressed by the mass transfer coefficient, were evaluated. As expected from the literature, it was observed that the absorption of heavy hydrocarbon fraction is favored by lowering the temperature. Moreover, both temperature and flowrate favors mass transfer (kinetic effect). The absorption kinetics for removal of heavy components was monitored by chromatographic analysis and the experimental results demonstrated a high percentage of recovery of heavy components. Furthermore, it was observed that the use of octyl alcohol as absorbent was feasible for the requested separation process.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In the oil industry, natural gas is a vital component of the world energy supply and an important source of hydrocarbons. It is one of the cleanest, safest and most relevant of all energy sources, and helps to meet the world's growing demand for clean energy in the future. With the growing share of natural gas in the Brazil energy matrix, the main purpose of its use has been the supply of electricity by thermal power generation. In the current production process, as in a Natural Gas Processing Unit (NGPU), natural gas undergoes various separation units aimed at producing liquefied natural gas and fuel gas. The latter should be specified to meet the thermal machines specifications. In the case of remote wells, the process of absorption of heavy components aims the match of fuel gas application and thereby is an alternative to increase the energy matrix. Currently, due to the high demand for this raw gas, research and development techniques aimed at adjusting natural gas are studied. Conventional methods employed today, such as physical absorption, show good results. The objective of this dissertation is to evaluate the removal of heavy components of natural gas by absorption. In this research it was used as the absorbent octyl alcohol (1-octanol). The influence of temperature (5 and 40 °C) and flowrate (25 and 50 ml/min) on the absorption process was studied. Absorption capacity expressed by the amount absorbed and kinetic parameters, expressed by the mass transfer coefficient, were evaluated. As expected from the literature, it was observed that the absorption of heavy hydrocarbon fraction is favored by lowering the temperature. Moreover, both temperature and flowrate favors mass transfer (kinetic effect). The absorption kinetics for removal of heavy components was monitored by chromatographic analysis and the experimental results demonstrated a high percentage of recovery of heavy components. Furthermore, it was observed that the use of octyl alcohol as absorbent was feasible for the requested separation process.

Relevância:

20.00% 20.00%

Publicador:

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The objective of this study was to examine the growth of Gracilaria cervicornis cultured in a shrimp (Litopenaeus vannamei) pond and to determine the absorption efficiency and the kinetics parameters (Vmax, Ks e Vmax:Ks) of this macroalgae for the nutrients N-NO3-, N-NH4+ and P-PO4-3, aiming at its use as bioremediatory of eutrophicated environments. For this study, two experiments (field and laboratory) were developed. In the field study, the seaweed was examined in relation to the growth and the biomass. In the laboratory experiment, the absorption efficiency of G. cervicornis was measured through the monitoring of the concentration of the three nutrients (N-NO3-, N-NH4+ e P-PO4-3) during 5 hours and the kinetic parameters were determined through the formula of Michaelis-Menten. The results obtained in this study demonstrated that G. cervicornis benefited from the available nutrients in the pond, increasing 52.4% of its biomass value after 30 days of culture. It was evidenced that the variability of the biomass could be explained through the salinity, availability of light (transparency and solid particle in suspension) and concentration of N-NO3- in the environment. In the laboratory experiment, the highest absorption efficiency was found in the treatments with low concentration (5 µmol.L-1), being evidenced a reduction of up to 85,3%, 97,5% and 81,2% of N-NH4+, N-NO3- and P-PO43-, respectively. Regarding the kinetic parameters, G. cervicornis presented better ability in absorbing N-NH4+ in high concentrations (Vmax = 158,5 µmol g-1 dry wt h-1) and P-PO43- in low concentrations (Ks = 5 µmol.L-1 e Vmax:Ks = 10,3). The results of this study show that G. cervicornis could be cultivated in shrimp ponds, presents a good capacity of absorption for the tested nutrients and is a promising candidate for biorremediation in shrimp pond effluent

Relevância:

20.00% 20.00%

Publicador:

Resumo:

As famílias portuguesas têm vindo a mudar o seu estilo de vida e tem-se assistido cada vez mais a uma diminuição do tempo e disponibilidade para a confeção das suas refeições diárias. Tal facto aumenta a procura e o consumo de alimentos de fácil confeção comercializados nas grandes superfícies comerciais, como é o caso das batatas pré-fritas congeladas. O objetivo deste trabalho foi determinar o teor de gordura total e o perfil de ácidos gordos de batatas pré-fritas, ultracongeladas, com diferentes tipos de corte. Em 2015, foram adquiridos em superfícies comerciais da região de Lisboa, 6 tipos de batatas pré-fritas ultracongeladas com diferentes cortes (palitos, palitos finos, cubos, rodelas, “steakhouse” e “noisette”). As amostras foram posteriormente sujeitas a fritura doméstica, com o mesmo tipo de óleo de fritura. O teor total de gordura das amostras (pré-fritas e fritas) foi determinado pelo método de hidrólise ácida e extração em Soxhlet com éter de petróleo, e o perfil de ácidos gordos foi determinado por cromatografia gasosa com deteção por ionização de chama. O teor total de gordura das amostras variou entre 3,01 e 14,9 g/100 g de parte edível para as batatas pré-fritas (cubos) e as batatas fritas (palitos finos), respetivamente. Durante a fritura, as batatas cortadas em palitos finos foram as que absorveram mais gordura (10,5 g/100 g), enquanto as batatas “noisette” foram as que menos absorveram (3,12 g/100 g). No que diz respeito ao perfil de ácidos gordos, 66,7% das amostras apresentaram maioritariamente ácidos gordos polinsaturados (AGPI), com teores que variaram entre 0,30 e 8,71 g/100 g de parte edível, para as batatas pré-fritas (cubos) e as batatas fritas (palitos finos), respetivamente. O teor de ácidos gordos saturados variou entre 0,83 e 2,16 g/100 g para as batatas “steakhouse” e palitos finos, ambas pré-fritas. Com este trabalho foi possível verificar que o tipo de corte da batata influencia diretamente a absorção de gordura aquando da sua fritura. Foi também possível concluir que as amostras analisadas apresentaram teores elevados de AGPI, sendo este perfil de ácidos gordos fortemente influenciado pelo óleo ou gordura utilizada na fritura, dado que a batata no seu estado natural apresenta um teor de gordura muito reduzido.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Portugal é um país dependente da energia do exterior, devido à elevada percentagem de consumo de energia a partir de fontes primárias, como por exemplo o gasóleo. Para colmatar este cenário, têm vindo a criar-se incentivos para o uso de energias renováveis e para intensificação de medidas de eficiência energética, como os sistemas de cogeração, de forma a tornar os processos industriais nacionais mais autónomos e mais competitivos. O presente trabalho, centra-se na avaliação do chiller de absorção na central de trigeração da empresa Monteiro, Ribas-Indústria, SA, com a finalidade de identificar algum problema no funcionamento do chiller. Após efetuado o estudo do chiller, verificou-se que o coeficiente de performance do chiller apresenta valores que variam entre 0,75 e 0,81, que comparado com o valor especificado, não apresenta grande diferença. No que toca à potência do chiller, esta apresentou valores entre 948 e 1045 kW. Estes valores estavam bem abaixo da potência especificada pelos fornecedores. Assim, pretendeu-se propor medidas para melhor a potência obtida. Para o efeito foi sugerido o aquecimento da corrente que atua como fonte de calor para o chiller, a corrente de água quente. Embora a empresa apresente a solução para o problema, um permutador de vapor para o aquecimento da corrente de água quente, este não se encontra em funcionamento contínuo, levando a uma potência mais baixa.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Em peixes, o cobre (Cu) é absorvido a partir da água, via branquial, e pela ingestão de água e alimento, via gastrintestinal. Para evitar reações não específicas prejudiciais e suprir proteínas dependentes de Cu, existem transportadores específicos, como as proteínas de absorção de alta afinidade ao Cu (CTR1) e as Cu-ATPases (ATP7), que auxiliam na translocação intracelular do metal. No presente estudo, os genes CTR1 e ATP7B foram identificados em Poecilia vivipara e os seus transcritos foram quantificados por RT-qPCR nas brânquias, no fígado e no intestino de guarús expostos (96 h) ao Cu (0, 5, 9 e 20 µg/L) em água doce e salgada (salinidade 24). Foram identificadas novas sequências nucleotídicas dos genes CTR1 (1560 pb, completa) e ATP7B (617 pb, parcial), as quais tiveram altos valores de identidade com as descritas para Fundulus heteroclitus (CTR1=81%) e Sparus aurata (ATP7B=81%). A análise por RT-qPCR indicou níveis de transcrição para CTR1 e ATP7B em todos os tecidos analisados. Em guarús na água doce, a maior expressão da CTR1 e da ATP7B se deu no fígado. Em guarús na água salgada, a maior expressão da CTR1 ocorreu no intestino, enquanto a da ATP7B se deu no fígado e intestino. Na água doce, a exposição ao Cu aumentou o conteúdo branquial e hepático de Cu, diminuiu os transcritos de CTR1 e ATP7B nas brânquias e aumentou os transcritos destes genes no fígado, sem alterar o conteúdo corporal de Cu. Na água salgada, a exposição ao Cu aumentou o conteúdo de Cu e diminuiu o transcrito de ATP7B no intestino, sem alterar o conteúdo corporal de Cu nos P. vivipara. Estes resultados indicam que a homeostasia do Cu em P. vivipara envolve a redução da expressão do CTR1 e ATP7B nas brânquias (água doce) e intestino (água salgada) para limitar a absorção do Cu e o aumento da expressão destes genes no fígado (água doce) para facilitar o armazenamento e desintoxicação do Cu.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

La enterocolitis necrotizante es de las enfermedades más frecuentes en la etapa neonatal con alta morbi mortalidad, requiriendo en muchos casos resección quirúrgica, predisponiendo de manera directa al desarrollo del síndrome de intestino corto. El síndrome de intestino corto conlleva a una serie de complicaciones nutricionales, infecciosas y metabólicas importantes no identificadas en nuestro medio y que están asociadas a factores directos e indirectos que aún no se han descrito. Las características clínicas dependerán del segmento resecado, extensión, compromiso de la válvula ileocecal, grado de adaptación intestinal y complicaciones posquirúrgicas. Su manejo es principalmente nutricional y requiere un equipo multidisciplinario para complementar las necesidades principales del tratamiento y mejorar el pronóstico. Objetivos: En este estudio de graduación para optar al título de especialista en medicina pediátrica se describirán las características epidemiológicas, clínicas, el manejo quirúrgico y de soporte en niños que se someten a resección intestinal por enterocolitis necrotizante grado III y desarrollan síndrome de intestino corto, así como su prevalencia y complicaciones frecuentes observadas en el período entre enero 2006 a diciembre 2010. Material y Métodos: El estudio se realizó a través de una revisión sistemática de expedientes clínicos de pacientes con diagnóstico de enterocolitis necrotizante. La recolección de éstos datos se realizó utilizando la base de datos del departamento de estadística del HNNBB en un periodo de 5 años. Se registraron 216 casos de enterocolitis necrotizante y de éstos se depuraron según los criterios de inclusión y exclusión hasta extraer solamente a aquellos a los cuales se les realizó cirugía intestinal y se identificaron los que cumplían con la definición de síndrome de intestino corto, siendo 17 y 6 respectivamente. Resultados: Posterior a esta recolección se aporta información actual y real a las diferentes disciplinas involucradas en el manejo del niño con SIC secundario a resección quirúrgica por ECN. Se describen los factores epidemiológicos y clínicos que mantienen relación directa o indirecta con el desarrollo de síndrome de intestino corto y también el tratamiento médico y quirúrgico que influyeron en el mismo.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Dissertação (Mestrado em Tecnologia Nuclear)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Physical-chemical properties of Ti are sensible to the presence of interstitial elements. In the case of thermochemical treatments plasma assisted, the influence of different active species is not still understood. In order to contribute for such knowledge, this work purposes a study of the role played by the active species atmosphere into the Ar N2 CH4 carbonitriding plasma. It was carried out a plasma diagnostic by OES (Optical Emission Spectroscopy) in the z Ar y N2 x CH4 plasma mixture, in which z, y and x indexes represent gas flow variable from 0 to 4 sccm (cm3/min). The diagnostic presents abrupt variations of emission intensities associated to the species in determined conditions. Therefore, they were selected in order to carry out the chemical treatment and then to investigate their influences. Commercial pure Ti disks were submitted to plasma carbonitriding process using pre-established conditions from the OES measurements while some parameters such as pressure and temperature were maintained constant. The concentration profiles of interstitial elements (C and N atoms) were determined by Resonant Nuclear Reaction Analysis (NRA) resulting in a depth profile plots. The reactions used were 15N(ρ,αγ)12C and 12C(α,α)12C. GIXRD (Grazing Incidence X-Ray Diffraction) analysis was used in order to identify the presence of phases on the surface. Micro-Raman spectroscopy was used in order to qualitatively study the carbon into the TiCxN1 structure. It has been verified which the density species effectively influences more the diffusion of particles into the Ti lattice and characteristics of the layer formed than the gas concentration. High intensity of N2 + (391,4 nm) and CH (387,1 nm) species promotes more diffusion of C and N. It was observed that Hα (656,3 nm) species acts like a catalyzer allowing a deeper diffusion of nitrogen and carbon into the titanium lattice.