Developing an international survey of bicycle and helmet usage

The European Union‐funded collaborative network, COST Action TU1101: Towards safer bicycling through optimization of bicycle helmets and usage, aims to increase scientific knowledge about bicycle helmets in regards to traffic safety and to disseminate this knowledge to stakeholders, including cyclists, legislators, manufacturers, and the scientific community. The COST research team has developed a uniform international survey to better understand attitudinal and other factors that may influence bicycle and helmet usage, as well as crash risk. The online survey is being distributed by project partners in Europe, Israel, Australia, and potentially the US and Canada. The survey contains four types of questions: (1) biographical data, (2) frequency of cycling and amount of cycling for different purposes (e.g., commuting, health, recreation) and in different environments (e.g., bicycle trails, bike lanes, on sidewalks, in traffic), (3) frequency and circumstances for use and non‐use of helmets, attitudes and reasons for it, and; (4) crash involvement and level of reporting to the police. While the potential value of comparative data across countries with very different cycling cultures and safety levels is substantial, there are numerous challenges in developing, conducting, and analyzing the results of the survey. This presentation will focus on the scope of the international study, methodological issues and pitfalls of such a collaborative effort, and on initial results from one country (Israel). To illustrate, two findings from the preliminary Israeli survey indicate that: (1) none of the crashes were reported to the police including the ones involving hospital admission. Although underreporting of bicycle crashes by police is well documented in all countries the extent is unknown, and can be extreme. (2) Older riders tend to ride more for health/exercise reasons, while younger riders tend to ride more for commuting. Thus there is an interaction between riders’ age and the place and times of riding.

Festival focus : Brisbane International Film Festival

In 2012, the Brisbane International Film Festival officially came of age, celebrating its twenty-first birthday. The festival has emerged from a tumultuous adolescence and redefined its position on the Australian festival circuit as an advocate of locally made films and documentary filmmaking in particular. Brisbane’s International Film Festival opened in 1992 and has since been attended by more than 400,000 filmgoers. The festival is held annually and showcases a diverse range of feature films, documentaries, short films, animation and experimental work, children’s films and retrospectives.

The desirability of depoliticization: Compliance in the international climate regime

The Kyoto Protocol is remarkable among global multilateral environmental agreements for its efforts to depoliticize compliance. However, attempts to create autonomous, arm’s length and rule-based compliance processes with extensive reliance on putatively neutral experts were only partially realized in practice in the first commitment period from 2008 to 2012. In particular, the procedurally constrained facilitative powers vested in the Facilitative Branch were circumvented, and expert review teams (ERTs) assumed pivotal roles in compliance facilitation. The ad hoc diplomatic and facilitative practices engaged in by these small teams of technical experts raise questions about the reliability and consistency of the compliance process. For the future operation of the Kyoto compliance system, it is suggested that ERTs should be confined to more technical and procedural roles, in line with their expertise. There would then be greater scope for the Facilitative Branch to assume a more comprehensive facilitative role, safeguarded by due process guarantees, in accordance with its mandate. However, if – as appears likely – the future compliance trajectories under the United Nations Framework Convention on Climate Change will include a significant role for ERTs without oversight by the Compliance Committee, it is important to develop appropriate procedural safeguards that reflect and shape the various technical and political roles these teams currently play.

Foreign-currency and monetary geopolitics of United States and its effects on the future of the international system

The US dollar is still considered as the main strategic deposit among the currencies of different countries of the world and the policies of the World Bank and the International Financial Organizations have been and will always be influenced by the US economy. Despite the economic crises and commercial balance deficits in the United States, dollar has maintained its high position in and its domination over foreign exchanges and foreign-currency deposits of the countries. The novelty of the present research relies on its consideration of the political properties of the governments and the geopolitical effects of these countries on the position of their monetary and foreign-currency policies and consequently, on the international financial organizations such as the International Monetary Fund and the World Bank, which can determine the future of international economy and the political relations among countries. Our research proves that the political development of the United States and its geopolitical situation have been of the effective factors on dollar growth; and unless the competitors acquire such a relative advantage, they will not be able to seriously challenge the currency of dollar and the monetary policies of the United States, at least in a short time

Exploration of the fundamental equilibrium behaviour of calcium exchange with weak acid cation resins

This study evaluated the complexity of calcium ion exchange with sodium exchanged weak acid cation resin (DOW MAC-3). Exchange equilibria recorded for a range of different solution normalities revealed profiles which were represented by conventional “L” or “H” type isotherms at low values of equilibrium concentration (Ce) of calcium ions, plus a superimposed region of increasing calcium uptake was observed at high Ce values. The loading of calcium ions was determined to be ca. 53.5 to 58.7 g/kg of resin when modelling only the sorption curve created at low Ce values,which exhibited a well-defined plateau. The calculated calcium ion loading capacity for DOWMAC-3 resin appeared to correlate with the manufacturer's recommendation. The phenomenon of super equivalent ion exchange (SEIX) was observed when the “driving force” for the exchange process was increased in excess of 2.25 mmol calcium ions per gram of resin in the starting solution. This latter event was explained in terms of displacement of sodium ions from sodium hydroxide solution which remained in the resin bead following the initial conversion of the as supplied “H+” exchanged resin sites to the “Na+” version required for softening studies. Evidence for hydrolysis of a small fraction of the sites on the sodium exchanged resin surface was noted. The importance of carefully choosing experimental parameters was discussed especially in relation to application of the Langmuir–Vageler expression. This latter model which compared the ratio of the initial calcium ion concentration in solution to resin mass, versus final equilibrium loading of the calcium ions on the resin; was discovered to be an excellent means of identifying the progress of the calcium–sodium ion exchange process. Moreover, the Langmuir–Vageler model facilitated standardization of various calcium–sodium ion exchange experiments which allowed systematic experimental design.

Equilibrium and column studies of iron exchange with strong acid cation resin

The exchange of iron species from iron (III) chloride solutions with a strong acid cation resin has been investigated in relation to a variety of water and wastewater applications. A detailed equilibrium isotherm analysis was conducted wherein models such as Langmuir Vageler, Competitive Langmuir, Freundlich, Temkin, Dubinin Astakhov, Sips and Brouers-Sotolongo were applied to the experimental data. An important conclusion was that both the bottle-point method and solution normality used to generate the ion exchange equilibrium information influenced which sorption model fitted the isotherm profiles optimally. Invariably, the calculated value for the maximum loading of iron on strong acid cation resin was substantially higher than the value of 47.1 g/kg of resin which would occur if one Fe3+ ion exchanged for three “H+” sites on the resin surface. Consequently, it was suggested that above pH 1, various iron complexes sorbed to the resin in a manner which required less than 3 sites per iron moiety. Column trials suggested that the iron loading was 86.6 g/kg of resin when 1342 mg/L Fe (III) ions in water were flowed at 31.7 bed volumes per hour. Regeneration with 5 to 10 % HCl solutions reclaimed approximately 90 % of exchange sites.

An examination of isotherm generation : impact of bottle-point method upon potassium ion exchange with strong acid cation resin

This paper relates to the importance of impact of the chosen bottle-point method when conducting ion exchange equilibria experiments. As an illustration, potassium ion exchange with strong acid cation resin was investigated due to its relevance to the treatment of various industrial effluents and groundwater. The “constant mass” bottle-point method was shown to be problematic in that depending upon the resin mass used the equilibrium isotherm profiles were different. Indeed, application of common equilibrium isotherm models revealed that the optimal fit could be with either the Freundlich or Temkin equations, depending upon the conditions employed. It could be inferred that the resin surface was heterogeneous in character, but precise conclusions regarding the variation in the heat of sorption were not possible. Estimation of the maximum potassium loading was also inconsistent when employing the “constant mass” method. The “constant concentration” bottle-point method illustrated that the Freundlich model was a good representation of the exchange process. The isotherms recorded were relatively consistent when compared to the “constant mass” approach. Unification of all the equilibrium isotherm data acquired was achieved by use of the Langmuir Vageler expression. The maximum loading of potassium ions was predicted to be at least 116.5 g/kg resin.

Developing an international assurance standard on greenhouse gas statements

Worldwide public concern over climate change and the need to limit greenhouse gas (hereafter, GHG) emissions has increasingly motivated public officials to consider more stringent environmental regulation and standards. The authors argue that the development of a new international assurance standard on GHG disclosures is an appropriate response by the auditing and assurance profession to meet these challenges. At its December 2007 meeting, the International Auditing and Assurance Standards Board (hereafter, IAASB) approved a project to consider the development of such a standard aimed at promoting trust and confidence in disclosures of GHG emissions, including disclosures required under emissions trading schemes. The authors assess the types of disclosures that can be assured, and outline the issues involved in developing an international assurance standard on GHG emissions disclosures. The discussion synthesizes the insights gained from four international roundtables on the proposed IAASB assurance standard held in Asia-Pacific, North America, and Europe during 2008, and an IAASB meeting addressing this topic in December 2008.