The use of ZIP and CART to model cryptosporidiosis in relation to climatic variables

This research assesses the potential impact of weekly weather variability on the incidence of cryptosporidiosis disease using time series zero-inflated Poisson (ZIP) and classification and regression tree (CART) models. Data on weather variables, notified cryptosporidiosis cases and population size in Brisbane were supplied by the Australian Bureau of Meteorology, Queensland Department of Health, and Australian Bureau of Statistics, respectively. Both time series ZIP and CART models show a clear association between weather variables (maximum temperature, relative humidity, rainfall and wind speed) and cryptosporidiosis disease. The time series CART models indicated that, when weekly maximum temperature exceeded 31°C and relative humidity was less than 63%, the relative risk of cryptosporidiosis rose by 13.64 (expected morbidity: 39.4; 95% confidence interval: 30.9–47.9). These findings may have applications as a decision support tool in planning disease control and risk management programs for cryptosporidiosis disease.

Assessment of pre- and post-flood groundwater recharge via 3D visualisation, Lockyer Valley, southeast Queensland

The Lockyer Valley in southeast Queensland supports important and intensive irrigation which is dependant on the quality and availability of groundwater. Prolonged drought conditions from ~1997 resulted in a depletion of the alluvial aquifers, and concern for the long-term sustainability of this resource. By 2008, many areas of the valley were at < 20% of storage. Some relief occurred with rain events in early 2009, then in December 2010 - January 2011, most of southeast Queensland experienced unprecedented flooding. These storm-based events have caused a shift in research focus from investigations of drought conditions and mitigation to flood response analysis. For the alluvial aquifer system of the valley, a preliminary assessment of groundwater observation bore data, prior to and during the flood, indicates that there is a spatially variable aquifer response. While water levels in some bores screened in unconfined shallow aquifers have recovered by more than 10 m within a short period of time (months), others show only a small or moderate response. Measurements of pre- and post-flood groundwater levels and high-resolution time-series records from data loggers are considered within the framework of a 3D geological model of the Lockyer Valley using Groundwater Visualisation System(GVS). Groundwater level fluctuations covering both drought and flood periods are used to estimate groundwater recharge using the water table fluctuation method (WTF), supplemented by estimates derived using chloride mass balance. The presentation of hydraulic and recharge information in a 3D format has considerable advantages over the traditional 2D presentation of data. The 3D approach allows the distillation of multiple types of information(topography, geological, hydraulic and spatial) into one representation that provides valuable insights into the major controls of groundwater flow and recharge. The influence of aquifer lithology on the spatial variability of groundwater recharge is also demonstrated.

On the computation and interpretation of auto- and cross-trispectra

This paper discusses the principal domains of auto- and cross-trispectra. It is shown that the cumulant and moment based trispectra are identical except on certain planes in trifrequency space. If these planes are avoided, their principal domains can be derived by considering the regions of symmetry of the fourth order spectral moment. The fourth order averaged periodogram will then serve as an estimate for both cumulant and moment trispectra. Statistics of estimates of normalised trispectra or tricoherence are also discussed.

Implementation of ICD-11... perspectives from the Australian Bureau of Statistics

As the development of ICD-11 progresses, the Australian Bureau of Statistics is beginning to consider what will be required to successfully implement the new version of the classification. This paper will present early thoughts on the following: building understanding amongst the user community of upcoming changes and the implications of those changes; the need for training of coders and data users; development of analytical methods and conduct of comparability studies; processes to test, accept and implement new or updated coding software; assessment of coding quality; changes to data analyses and reporting processes; updates to regular publications; and assessing the resources required for successful implementation.

A case study examination of the influence of cultural diversity in the multicultural nursing workforce on the quality of care and patient safety in a Saudi Arabian hospital

The purpose of the study: The purpose of this study is to investigate the influence of cultural diversity, in a multicultural nursing workforce, on the quality and safety of patient care and the work environment at King Abdul-Aziz Medical City, Riyadh region. Study background: Due to global migration and workforce mobility, to varying degrees, cultural diversity exists in most health services around the world, particularly occurring where the health care workforce is multicultural or where the domestic population comprises minority groups from different cultures speaking different languages. Further complexities occur when countries have a multicultural workforce which is different from the population for whom they care, in addition to the workers being from culturally diverse countries and with different languages. In Saudi Arabia the health system is mainly staffed by expatriate nurses who comprise 67.7% of the total number of nurses. Study design: This research utilised a case study design which incorporated multiple methods including survey, qualitative interviews and document review. Methods: The participant nurses were selected for the survey via a population sampling strategy; 319 nurses returned their completed Safety Climate Survey questionnaires. Descriptive and inferential statistics (Kruskal–Wallis test) were used to analyse survey data. For the qualitative component of the study, a purposive sampling strategy was used; 24 nurses were interviewed using a semi-structured interview technique. The documentary review included KAMC-R policy documents that met the inclusion criteria using a predetermined data abstraction instrument. Content analysis was used to analyse the policy documents data. Results: The data revealed the nurses‘ perceptions of the clinical climate in this multicultural environment is that it was unsafe, with a mean score of 3.9 out of 5. No significant difference was detected between the age groups or years of experience of the nurses and the perception of safety climate in this context; the study did reveal a statistically significant difference between the cultural background categories and the perception of safety climate. The qualitative phase indicated that the nurses within this environment were struggling to achieve cultural competence; consequently, they were having difficulties in meeting the patients‘ cultural and spiritual needs as well as maintaining a high standard of care. The results also indicated that nurses were disempowered in this context. Importantly, there was inadequate support by the organisation to manage the cultural diversity issue and to protect patients from any associated risks, as demonstrated by the policy documents and supported by the nurses‘ experiences. The study also illustrated the limitations of the conceptual framework of cultural competence when tested in this multicultural workforce context. Therefore, this study generated amendments to the model that is suitable to be used in the context of a multicultural nursing workforce. Conclusion: The multicultural nature of this nursing work environment is inherently risky due to the conflicts that arise from the different cultural norms, beliefs, behaviours and languages. Further, there was uncertainty within the multicultural nursing workforce about the clinical and cultural safety of the patient care environment and about the cultural safety of the nursing workforce. The findings of the study contribute important new knowledge to the area of patient and nurse safety in a multicultural environment and contribute theoretical development to the field of cultural competence. Specifically, the findings will inform policy and practice related to patient care in the context of cultural diversity.

The increased popularity of mopeds and motor scooters : exploring usage patterns and safety outcomes

Increased use of powered two-wheelers (PTWs) often underlies increases in the number of reported crashes, promoting research into PTW safety. PTW riders are overrepresented in crash and injury statistics relative to exposure and, as such, are considered vulnerable road users. PTW use has increased substantially over the last decade in many developed countries. One such country is Australia, where moped and scooter use has increased at a faster rate than motorcycle use in recent years. Increased moped use is particularly evident in the State of Queensland which is one of four Australian jurisdictions where moped riding is permitted for car licence holders and a motorcycle licence is not required. A moped is commonly a small motor scooter and is limited to a maximum design speed of 50 km/h and a maximum engine cylinder capacity of 50 cubic centimetres. Scooters exceeding either of these specifications are classed as motorcycles in all Australian jurisdictions. While an extensive body of knowledge exists on motorcycle safety, some of which is relevant to moped and scooter safety, the latter PTW types have received comparatively little focused research attention. Much of the research on moped safety to date has been conducted in Europe where they have been popular since the mid 20th century, while some studies have also been conducted in the United States. This research is of limited relevance to Australia due to socio-cultural, economic, regulatory and environmental differences. Moreover, while some studies have compared motorcycles to mopeds in terms of safety, no research to date has specifically examined the differences and similarities between mopeds and larger scooters, or between larger scooters and motorcycles. To address the need for a better understanding of moped and scooter use and safety, the current program of research involved three complementary studies designed to achieve the following aims: (1) develop better knowledge and understanding of moped and scooter usage trends and patterns; and (2) determine the factors leading to differences in moped, scooter and motorcycle safety. Study 1 involved six-monthly observations of PTW types in inner city parking areas of Queensland’s capital city, Brisbane, to monitor and quantify the types of PTW in use over a two year period. Study 2 involved an analysis of Queensland PTW crash and registration data, primarily comparing the police-reported crash involvement of mopeds, scooters and motorcycles over a five year period (N = 7,347). Study 3 employed both qualitative and quantitative methods to examine moped and scooter usage in two components: (a) four focus group discussions with Brisbane-based Queensland moped and scooter riders (N = 23); and (b) a state-wide survey of Queensland moped and scooter riders (N = 192). Study 1 found that of the PTW types parked in inner city Brisbane over the study period (N = 2,642), more than one third (36.1%) were mopeds or larger scooters. The number of PTWs observed increased at each six-monthly phase, but there were no significant changes in the proportions of PTW types observed across study phases. There were no significant differences in the proportions or numbers of PTW type observed by season. Study 2 revealed some important differences between mopeds, scooters and motorcycles in terms of safety and usage through analysis of crash and registration data. All Queensland PTW registrations doubled between 2001 and 2009, but there was an almost fifteen-fold increase in moped registrations. Mopeds subsequently increased as a proportion of Queensland registered PTWs from 1.2 percent to 8.8 percent over this nine year period. Moped and scooter crashes increased at a faster rate than motorcycle crashes over the five year study period from July 2003 to June 2008, reflecting their relatively greater increased usage. Crash rates per 10,000 registrations for the study period were only slightly higher for mopeds (133.4) than for motorcycles and scooters combined (124.8), but estimated crash rates per million vehicle kilometres travelled were higher for mopeds (6.3) than motorcycles and scooters (1.7). While the number of crashes increased for each PTW type over the study period, the rate of crashes per 10,000 registrations declined by 40 percent for mopeds compared with 22 percent for motorcycles and scooters combined. Moped and scooter crashes were generally less severe than motorcycle crashes and this was related to the particular crash characteristics of the PTW types rather than to the PTW types themselves. Compared to motorcycle and moped crashes, scooter crashes were less likely to be single vehicle crashes, to involve a speeding or impaired rider, to involve poor road conditions, or to be attributed to rider error. Scooter and moped crashes were more likely than motorcycle crashes to occur on weekdays, in lower speed zones and at intersections. Scooter riders were older on average (39) than moped (32) and motorcycle (35) riders, while moped riders were more likely to be female (36%) than scooter (22%) or motorcycle riders (7%). The licence characteristics of scooter and motorcycle riders were similar, with moped riders more likely to be licensed outside of Queensland and less likely to hold a full or open licence. The PTW type could not be identified in 15 percent of all cases, indicating a need for more complete recording of vehicle details in the registration data. The focus groups in Study 3a and the survey in Study 3b suggested that moped and scooter riders are a heterogeneous population in terms of demographic characteristics, riding experience, and knowledge and attitudes regarding safety and risk. The self-reported crash involvement of Study 3b respondents suggests that most moped and scooter crashes result in no injury or minor injury and are not reported to police. Study 3 provided some explanation for differences observed in Study 2 between mopeds and scooters in terms of crash involvement. On the whole, scooter riders were older, more experienced, more likely to have undertaken rider training and to value rider training programs. Scooter riders were also more likely to use protective clothing and to seek out safety-related information. This research has some important practical implications regarding moped and scooter use and safety. While mopeds and scooters are generally similar in terms of usage, and their usage has increased, scooter riders appear to be safer than moped riders due to some combination of superior skills and safer riding behaviour. It is reasonable to expect that mopeds and scooters will remain popular in Queensland in future and that their usage may further increase, along with that of motorcycles. Future policy and planning should consider potential options for encouraging moped riders to acquire better riding skills and greater safety awareness. While rider training and licensing appears an obvious potential countermeasure, the effectiveness of rider training has not been established and other options should also be strongly considered. Such options might include rider education and safety promotion, while interventions could also target other road users and urban infrastructure. Future research is warranted in regard to moped and scooter safety, particularly where the use of those PTWs has increased substantially from low levels. Research could address areas such as rider training and licensing (including program evaluations), the need for more detailed and reliable data (particularly crash and exposure data), protective clothing use, risks associated with lane splitting and filtering, and tourist use of mopeds. Some of this research would likely be relevant to motorcycle use and safety, as well as that of mopeds and scooters.

The genesis of 'the new geography and the new imperialism : 1870-1918', or 'how I came to Jamaica and joined the UWI Geography Department

In this article, Brian Hudson relates how he came to write the paper published in the journal Antipode, for which he gained recognition as a radical geographer in the late 1970's. It is a tale of a journey in which the loves of his life, geography, history, travel and his wife of over 40 years, came together through living in a number of different places: the United Kingdom, Ghana, Hong Kong, and Jamaica. After leaving UWI, Brian and his family settled in Brisbane, Australia where he taught at Queensland University of Technology until his retirement.

Freshwater sensitivity of corrensite and chlorite/smectite in hydrocarbon reservoirs - an ESEM study

An Environmental Scanning Electron Microscope (ESEM) has been used to investigate the freshwater sensitivity of secondary corrensite (regularly interstratified chlorite/smectite) and chlorite-rich chlorite/smectite in order to determine whether hydrocarbon reservoirs hosting these clays should be regarded as freshwater sensitive. ESEM experiments involved an examination and close comparison of selected clay areas in three samples at high magnification before, during and after prolonged freshwater treatments. Corrensite and chlorine/smectite in the samples did not visibly swell when immersed in fresh water. After soaking in fresh water for up to three months, these clays retained their original morphology and associated porosity. Hence, the presence of corrensite or chlorite/smectite in a hydrocarbon reservoir need not indicate that the reservoir is freshwater sensitive. © 1994.

Characteristics of culturally and linguistically diverse mental health clients

The present study examined Queensland Transcultural Mental Health Centre (QTMHC) client characteristics in order to provide a better understanding for development of future health service delivery models. Archived data that was collected for 1499 clients over two years period (2007-2009) was analysed using descriptive statistics and Chi squares. The results indicated that clients were referred from a range of sources and were generally adults. There were more women than men, who sought services. At least half of the clients had language barriers and relied on bilingual workers. Most frequently expressed mental health issues were mood disorder symptoms, followed by symptoms of schizophrenia and psychosis and anxiety. Acculturation strains and stressors were described as the most common psychosocial issues. Mental health and psychosocial issues differed for age, gender and world regions from which the CALD clients originated. The findings provided an understanding of clients who seek services at QTMHC. Various ways in which transcultural services and data bases can be further improved are discussed.

What relationships exist between general self efficacy, locus of control and the nursing practice environment and caring efficacy and job satisfaction?

Research Question: What relationships exist between general self efficacy, locus of control and the nursing practice environment and caring efficacy and job satisfaction? Background: Important characteristics of current nursing practice include nurses having the ability to develop and continue therapeutic relationships with patients, nurses having autonomy and control over the practice environment and nurses having more involvement in decision making. In addition, employee satisfaction is enhanced when organisations offer access to authority. Despite this, nurses continue to complain of feeling powerless in their ability to make decisions. Sample: The study population and criteria for selection included Registered Nurses in Australia who were at the time members of an Australian professional and industrial organisation. Methods: A cross-sectional survey was undertaken. Data analysis was conducted using descriptive and bivariate statistics, and structural equation modeling. Results: The model fit the data well (χ² = 2.3594, χ²/df = 2.3594 and CFI = 0.9987). Twenty four percent of variation in caring efficacy (CE) can be accounted for by general self-efficacy (GSE); work locus of control (WLC) and practice environment (PE) and 62% of the variation in job satisfaction (JS) can be accounted for by GSE, WLC and PE. All pathways were found to be significant except PE to CE. GSE positively explained CE (β = 0.38). WLC was negatively related to CE i.e., as CE scores increased WLC scores decreased (β = -0.23). Further testing of the model found CE was positively related to GSE (βZ = 0.38, p < 0.001) and negatively related to WLC (βZ = - 0.23, p = 0.001). PE was not significantly associated with CE (βZ = - 0.01, p = 0.85). JS was explained by PE, which was positively related (βZ = 0.69, p = < 0.001); GSE which was negatively related (βZ - 0 .09, p < 0.001) and WLC, which was also negatively related (βZ = - 0.20, p < 0.001). Implications for Practice Nursing and organisational leaders should ensure the development of strategies for professional development and orientation programmes which may enhance nurses’ ability to develop caring relationships and express caring behaviours to their patients and as a result improve organisational and patient outcomes. Nursing shortages and turnover rates are associated with job satisfaction and the nursing practice environment. Improving the nursing environment can produce benefits to the health system such as better job satisfaction, improved workforce retention and better patient outcomes.

Load-unloading response of intact and artificially degraded articular cartilage correlated with near infrared (NIR) absorption spectra

The conventional mechanical properties of articular cartilage, such as compressive stiffness, have been demonstrated to be limited in their capacity to distinguish intact (visually normal) from degraded cartilage samples. In this paper, we explore the correlation between a new mechanical parameter, namely the reswelling of articular cartilage following unloading from a given compressive load, and the near infrared (NIR) spectrum. The capacity to distinguish mechanically intact from proteoglycan-depleted tissue relative to the "reswelling" characteristic was first established, and the result was subsequently correlated with the NIR spectral data of the respective tissue samples. To achieve this, normal intact and enzymatically degraded samples were subjected to both NIR probing and mechanical compression based on a load-unload-reswelling protocol. The parameter δ(r), characteristic of the osmotic "reswelling" of the matrix after unloading to a constant small load in the order of the osmotic pressure of cartilage, was obtained for the different sample types. Multivariate statistics was employed to determine the degree of correlation between δ(r) and the NIR absorption spectrum of relevant specimens using Partial Least Squared (PLS) regression. The results show a strong relationship (R(2)=95.89%, p<0.0001) between the spectral data and δ(r). This correlation of δ(r) with NIR spectral data suggests the potential for determining the reswelling characteristics non-destructively. It was also observed that δ(r) values bear a significant relationship with the cartilage matrix integrity, indicated by its proteoglycan content, and can therefore differentiate between normal and artificially degraded proteoglycan-depleted cartilage samples. It is therefore argued that the reswelling of cartilage, which is both biochemical (osmotic) and mechanical (hydrostatic pressure) in origin, could be a strong candidate for characterizing the tissue, especially in regions surrounding focal cartilage defects in joints.

Compaction control of topography and fault network structure along strike-slip faults in sedimentary basins

Strike-slip faults commonly display structurally complex areas of positive or negative topography. Understanding the development of such areas has important implications for earthquake studies and hydrocarbon exploration. Previous workers identified the key factors controlling the occurrence of both topographic modes and the related structural styles. Kinematic and stress boundary conditions are of first-order relevance. Surface mass transport and material properties affect fault network structure. Experiments demonstrate that dilatancy can generate positive topography even under simple-shear boundary conditions. Here, we use physical models with sand to show that the degree of compaction of the deformed rocks alone can determine the type of topography and related surface fault network structure in simple-shear settings. In our experiments, volume changes of ∼5% are sufficient to generate localized uplift or subsidence. We discuss scalability of model volume changes and fault network structure and show that our model fault zones satisfy geometrical similarity with natural flower structures. Our results imply that compaction may be an important factor in the development of topography and fault network structure along strike-slip faults in sedimentary basins.