Single-mode acceleration of matter waves in circular waveguides

Ultracold gases in ring geometries hold promise for significant improvements of gyroscopic sensitivity. Recent experiments have realized atomic and molecular storage rings with radii in the centimeter range, sizes whose practical use in inertial sensors requires velocities significantly in excess of typical recoil velocities. We use a combination of analytical and numerical techniques to study the coherent acceleration of matter waves in circular waveguides, with particular emphasis on its impact on single-mode propagation. In the simplest case we find that single-mode propagation is best maintained by the application of time-dependent acceleration force with the temporal profile of a Blackmann pulse. We also assess the impact of classical noise on the acceleration process.

Thomas-Fermi ground state of dipolar fermions in a circular storage ring

Recent developments in the field of ultracold gases has led to the production of degenerate samples of polar molecules. These have large static electric-dipole moments, which in turn causes the molecules to interact strongly. We investigate the interaction of polar particles in waveguide geometries subject to an applied polarizing field. For circular waveguides, tilting the direction of the polarizing field creates a periodic inhomogeneity of the interparticle interaction. We explore the consequences of geometry and interaction for stability of the ground state within the Thomas-Fermi model. Certain combinations of tilt angles and interaction strengths are found to preclude the existence of a stable Thomas-Fermi ground state. The system is shown to exhibit different behavior for quasi-one-dimensional and three-dimensional trapping geometries.

O papel dos valores e crenças africanas no tempo de trabalho circular, nas estratégias, na negociação das diferenças entre operários e dirigentes no corredor de Maputo

A categoria tempo circular ou indiferenciado mostra que o trabalho formal é vivido de acordo com a subjetividade dos seus participantes, com uma multiplicidade de significados e de configurações sempre variáveis. Neste estudo, identificou-se a existência de uma relação entre o tempo circular e as estratégias elaboradas pelos trabalhadores na conquista de uma maior autonomia nos espaços de trabalho. Além disso, observou-se a convivência entre trabalhadores, empresários e dirigentes governamentais e sindicais presentes num projeto de modernização no sul de Moçambique, denominado Corredor de Desenvolvimento de Maputo e constatou-se o modo como é realizada a negociação das diferenças. Realizou-se um levantamento das principais estratégias levadas a cabo por empresários nacionais, estrangeiros, governo e sindicatos na gestão da força de trabalho, formação, qualificação e o uso do tempo nos espaços de trabalho, bem como as perspectivas de desenvolvimento humano trazido por este projeto na região de Maputo. Por enquanto, ainda não foi possível detectar um interesse real dos grupos empresariais e governamentais em delinear caminhos tendentes a encontrar equilíbrios possíveis entre a modernização e a tradição, que sejam compatíveis com a satisfação das necessidades, valores e crenças e o respeito ao imaginário dos grupos envolvidos na construção da modernização tecnológica do país. Parecem evidentes estratégias em que a responsabilidade social está ausente e a estratégia de abertura das Zonas Francas Industriais ao investimento externo carece de uma verdadeira negociação entre “parceiros” em que sejam distribuídas de forma equitativa as vantagens e desvantagens inerentes aos projetos de industrialização a serem implantados localmente. Os testemunhos obtidos junto dos protagonistas moçambicanos expressaram uma grande frustração e desencantamento quanto a resultados que possam vir a ser promissores para as populações, trabalhadores e empresários nacionais do projeto em curso. Portanto, este projeto mostra ser um processo exógeno introduzido à revelia de seus principais protagonistas nesta fase de implantação em território moçambicano e onde os aspectos culturais foram desrespeitados, além de serem usados como estratégia para tirar vantagens adicionais.

Análise experimental do sistema "vórtice ferradura" no escoamento ao redor de um cilindro circular

Este trabalho apresenta o estudo de um sistema hidrodinâmico encontrada em muitas situações dentro da mecânica dos fluidos: o Vórtice Ferradura. Esta estrutura possui características bastante complexas e seu comportamento ainda é pouco compreendido e explicado. Assim, o escoamento ao redor do cilindro circular, em leito fixo, foi investigado experimentalmente, com o propósito de tentar caracterizar o comportamento hidrodinâmico do Vórtice Ferradura através da visualização de escoamento e medições de pressão. Para o trabalho, um cilindro foi montado. As visualizações do Vórtice foram feitas através de uma janela de visualização na seção de testes do canal. A filmagem foi feita através de uma câmera de vídeo VHS, de uso doméstico, e injeção de corante. As medições de pressão foram feitas através do emprego de transdutores de pressão, e divididas em dois grupos: (i) medições de pressão feitas no leito do canal, na linha de simetria, na região de escoamento próxima ao Vórtice; (ii) medições de pressão do escoamento na superfície do cilindro. As imagens, assim como os dados de transdutor, foram transportados para o meio digital para posterior manipulação e análise. Os resultados confirmam algumas descrições fornecidas pela literatura, bem como, também levantam algumas considerações sobre o assunto: as imagens permitiram a visualização das etapas de formação do Vórtice, descrever modificações em seu diâmetro ao longo dos ensaios, reconhecer a variabilidade espacial de sua posição e detectar a presença de um vórtice secundário. Os dados de transdutor descreveram o campo de pressões no leito do canal, modificado pela presença do cilindro e, ao redor da superfície do mesmo, bem como, o comportamento das flutuações de pressão, correlações, autocorrelações e espectros das flutuações de pressão dos transdutores, para estas situações.

Memória de um tempo circular no território de Carlos Fuentes

Ao contrário da concepção linear do pensamento ocidental, o tempo mexicano, situado na tradição pré-hispânica, indica uma multiplicidade de tempos, possibilitando que variadas e distantes épocas sejam realidades presentes. Nesse enfoque, diferentes tempos da história mexicana incorporam a narrativa de Carlos Fuentes, onde é comum passado, presente e futuro estarem imbricados em circularidades que resgatam com a imaginação e a linguagem uma memória encoberta pelo discurso totalizador. Na sua obra, Carlos Fuentes percorre mitos, tempos e espaços através de uma escritura que traduz uma cultura mestiça construída por vertentes americanas e européias. No entrelaçamento da pluralidade dos mundos, descobre os acontecimentos do passado, introduzindo significações aos silêncios relegados à margem da história. Através das análises de “Las dos orillas” – conto do livro El naranjo; do romance La muerte de Artemio Cruz e de personagens que transitam nos contos de La frontera de cristal, são investigados três momentos da história mexicana: Conquista espanhola, Revolução mexicana e migrações da atualidade na fronteira. Desse modo, são exploradas possibilidades históricas disseminadas na produção de Carlos Fuentes

Ampliação de movimentos na dança circular com pessoas com deficiência visual

This paper aims at studying how circular dance can afford to sight-disabled peoples movement and how they can learn to cope with the deep movement of relation, consciousness, appropriation and communion with the world. Inside circular dance, a cosmic metaphor, is inscribed the movement of the world, which tells and changes amorously the human history. In the works of Paulo Freire and Maurice Merleau-Ponty one can find the necessary support to discuss, as long as possible, movement and existence. Research-action is used as a methodological approach whose empirical center is placed on the Institute of Education and Rehabilitation of Blind, in Natal, which shelters eight sightdisabled adults. The research s data reveal that the practice of circular dance concurs to enlarge the movement of the research s subjects, to develop a more accurate perception of their selves and of their own capacities, as well as improve the relations Me/Others, Me/World, which require a context of differences. The study has revealed that the practice of dance develops a better perception of the limits and surpasses as a human condition and, in consequence, the discovery of one s own body and the other s body as a resource of lessons and representations of the self and of the world. It lets out the development of a new way of thinking and coping with discrimination surrounding the disabled persons. In movement, in circular dance, the barrier between sight disablement and vision loses force.

Construção, caracterização e aplicação de eletrodos para descarga por arco de cátodo oco

The system built to characterize electrodes and, consequently, deposited fine films are constituted by a hollow cathode that works to discharges and low pressures (approximately 10-3 to 5 mbar), a source DC (0 to 1200 V), a cylindrical camera of closed borossilicato for flanges of stainless steel with an association of vacuum bombs mechanical and spread. In the upper flange it is connected the system of hollow cathode, which possesses an entrance of gas and two entrances for its refrigeration, the same is electrically isolated of the rest of the equipment and it is polarized negatively. In front of the system of hollow cathode there is a movable sample in stainless steel with possibility of moving in the horizontal and vertical. In the vertical, the sample can vary its distance between 0 and 70 mm and, in the horizontal, can leave completely from the front of the hollow cathode. The sample and also the cathode hollow are equipped with cromel-alumel termopares with simultaneous reading of the temperatures during the time of treatment. In this work copper electrodes, bronze, titanium, iron, stainless steel, powder of titanium, powder of titanium and silício, glass and ceramic were used. The electrodes were investigated relating their geometry change and behavior of the plasma of the cavity of hollow cathode and channel of the gas. As the cavity of hollow cathode, the analyzed aspects were the diameter and depth. With the channel of the gas, we verified the diameter. In the two situations, we investigated parameters as flow of the gas, pressure, current and applied tension in the electrode, temperature, loss of mass of the electrode with relationship at the time of use. The flow of gas investigated in the electrodes it was fastened in a work strip from 15 to 6 sccm, the constant pressure of work was among 2.7 to 8 x 10-2 mbar. The applied current was among a strip of work from 0,8 to 0,4 A, and their respective tensions were in a strip from 400 to 220 V. Fixing the value of the current, it was possible to lift the curve of the behavior of the tension with the time of use. That curves esteem in that time of use of the electrode to its efficiency is maximum. The temperatures of the electrodes were in the dependence of that curves showing a maximum temperature when the tension was maximum, yet the measured temperatures in the samples showed to be sensitive the variation of the temperature in the electrodes. An accompaniment of the loss of mass of the electrode relating to its time of use showed that the electrodes that appeared the spherical cavities lost more mass in comparison with the electrodes in that didn't appear. That phenomenon is only seen for pressures of 10-2 mbar, in these conditions a plasma column is formed inside of the channel of the gas and in certain points it is concentrated in form of spheres. Those spherical cavities develop inside of the channel of the gas spreading during the whole extension of the channel of the gas. The used electrodes were cut after they could not be more used, however among those electrodes, films that were deposited in alternate times and the electrodes that were used to deposit films in same times, those films were deposited in the glass substrata, alumina, stainless steel 420, stainless steel 316, silício and steel M2. As the eletros used to deposit films in alternate time as the ones that they were used to deposit in same times, the behavior of the thickness of the film obeyed the curve of the tension with relationship the time of use of the electrode, that is, when the tension was maximum, the thickness of the film was also maximum and when the tension was minimum, the thickness was minimum and in the case where the value of the tension was constant, the thickness of the film tends to be constant. The fine films that were produced they had applications with nano stick, bio-compatibility, cellular growth, inhibition of bacterias, cut tool, metallic leagues, brasagem, pineapple fiber and ornamental. In those films it was investigated the thickness, the adherence and the uniformity characterized by sweeping electronic microscopy. Another technique developed to assist the production and characterization of the films produced in that work was the caloteste. It uses a sphere and abrasive to mark the sample with a cap impression, with that cap form it is possible to calculate the thickness of the film. Through the time of life of the cathode, it was possible to evaluate the rate of waste of its material for the different work conditions. Values of waste rate up to 3,2 x 10-6 g/s were verified. For a distance of the substratum of 11 mm, the deposited film was limited to a circular area of 22 mm diameter mm for high pressures and a circular area of 75 mm for pressure strip. The obtained films presented thickness around 2,1 µm, showing that the discharge of arch of hollow cathode in argon obeys a curve characteristic of the tension with the time of life of the eletrodo. The deposition rate obtained in this system it is of approximately 0,18 µm/min

Antenas monopolo planar com patch em anel circular para sistemas UWB

The microstrip antennas are largely used in wireless communication systems due to their low cost, weight, less complex construction and manufacturing, in addition to its versatility. UWB systems have emerged as an alternative to wireless communications over short distances because they offer of higher capacity and lower multipath distortion than other systems with the same purpose. Combining the advantages of microstrip antennas to the characteristics of UWB, it is possible to develop more and more smaller devices, with diverse geometries to operate satisfactorily in these systems. This paper aims to propose alternatives to microstrip antennas for UWB systems operate in the range between 3.1 and 10.6 GHz, with a patch on circular ring. Some techniques are analyzed and employed to increase the bandwidth of proposed antenna: the insertion of a parasitic elements and a rectangular slit in the displaced ground plane. For this, key issues are presented as the basic principles of UWB systems, the fundamental theory of antennas and microstrip antennas. The simulations and experimental characterization of constructed antennas are presented, as well as analysis of parameters such as bandwidth and radiation pattern

STEM ANATOMY and DEVELOPMENT of SUCCESSIVE CAMBIA IN THE NEOTROPICAL LIANA SECURIDACA RIVINIFOLIA (POLYGALACEAE)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Expression, purification, and circular dichroism analysis of human CDK9

The human cyclin-dependent kinase 9 (CDK9) protein was expressed in E coli BL21 using the pET23a vector at 30 degrees C. Several milligrams of protein were purified from soluble fraction using ionic exchange and ATP-affinity chromatography. The structural quality of recombinant CDK9 and the estimation of its secondary structure were obtained by circular dichroism. Structural models of CDK9 presented 26% of helices in agreement with the spectra by circular dichroism analysis. This is the first report on human CDK9 expression in Escherichia coli and structure analysis and provides the first step for the development of CDK9 inhibitors. (c) 2006 Elsevier B.V. All rights reserved.

Superconducting boundary conditions for mesoscopic circular samples

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Temperature-dependent vortex matter in a superconducting mesoscopic circular sector

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Vortices in a mesoscopic superconducting circular sector

In the present paper we develop an algorithm to solve the time dependent Ginzburg-Landau equations, by using the link variables technique, for circular geometries. In addition, we evaluate the Helmholtz and Gibbs free energy, the magnetization, and the number of vortices. This algorithm is applied to a circular sector. We evaluate the superconduting-normal magnetic field transition, the magnetization, and the superconducting density. Our results point out that, as we reduce the superconducting area, the nucleation field increases. Nevertheless, as the angular width of the circular sector goes to small values the asymptotic behavior is independent of the sample area. We also show that the value of the first nucleation field is approximately the same independently of the form of the circular sector. Furthermore, we study the nucleation of giant and multivortex states for the different shapes of the present geometry.

Vortex-antivortex annihilation dynamics in a square mesoscopic superconducting cylinder

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Low-altitude, near-polar and near-circular orbits around Europa

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)