Components of group processes: Have they conributed to the outcome of mood and anxiety diorder patients in a group cognitive-behaviour therapy program

The present study assessed the influence of group processes on clinical outcomes of patients with anxiety and depression following group Cognitive Behavior Therapy (CBT). Five group environment variables were measured: cohesion, leader support, expressiveness, independence, and self-discovery. One hundred and sixty two patients attended a group CBT program and were assessed at pre and post-treatment. Results provided evidence for the effectiveness of group therapy as patients reported significantly lower depression and anxiety at the conclusion of treatment. Expressiveness was the only predictor of post-treatment anxiety, whereas leader support, expressiveness, and independence were significant predictors of post-treatment depression. Overall, findings suggest that the patients benefited from high levels of expressiveness and independence within their therapy group. In contrast, they failed to benefit from high levels of leader support, whereas both group cohesion and self-discovery appeared to be unrelated to outcome

High fidelity radiation pattern measurement system for small antennas

The paper describes a high fidelity system for measuring a radiation pattern of an electrically small antenna. In this system, the Antenna Under Test (AUT) equipped with a battery powered signal generator is suspended by a dielectric foam in the centre of a pair of dielectric rings that are supported by a pedestal of a spherical positioning mechanical sub-system. Radiation patterns are obtained directly in spherical format using a suitably constructed probe antenna of linear or circular polarization. Measurements are controlled by a computer, which also stores and processes the measured data. The results reveal considerable differences between the radiation patterns of a small antenna obtained using the proposed wireless approach and the conventional one, in which the antenna is connected with a cable to the receiver.

On the execution of collaborative business processes

Management of collaborative business processes that span multiple business entities has emerged as a key requirement for business success. These processes are embedded in sets of rules describing complex message-based interactions between parties such that if a logical expression defined on the set of received messages is satisfied, one or more outgoing messages are dispatched. The execution of these processes presents significant challenges since each contentrich message may contribute towards the evaluation of multiple expressions in different ways and the sequence of message arrival cannot be predicted. These challenges must be overcome in order to develop an efficient execution strategy for collaborative processes in an intensive operating environment with a large number of rules and very high throughput of messages. In this paper, we present a discussion on issues relevant to the evaluation of such expressions and describe a basic query-based method for this purpose, including suggested indexes for improved performance. We conclude by identifying several potential future research directions in this area. © 2010 IEEE. All rights reserved

Microsensors technology used to measure productivity and other biochemical processes in the upper regions of aquatic sediments

Carbonate sediments are dynamic three-dimensional environments where the surface layers are constantly moving and mixing due to the energy of the water column. It is also an environment of dynamic biological, chemical and physical interaction and modification. The biological community can actively influence changes to sediment characteristics and associated biochemistry. Bioturbation resulting from macrofaunal activity disrupts sediment structure and biochemical arrangements and reduces the critical shear forces required to move sediment particles, adding to the dynamic and complex physical and biogeochemical nature of the sediment. Laboratory studies using both planner optodes and glass needle microsensors were used to measure abiotic sediment characteristics such as the depth distribution and concentrations of PAR. The biochemical nature of coral reef sediment were also investigated, specifically the quantification and the distribution of dissolved oxygen within coarse and fine-grained sediments under regimes of light and darkness. Results highlighted the significant contribution microalgal productivity and bioturbation has on distribution of dissolved oxygen in the upper sediment layers. On the reef flat a shallow water lander system was employed to measure concentrations of O2, pH, S, Ca and temperature over periods of 24 to 48 hours in coarse and fine-grained sediments. Similarities between laboratory and in situ results where evident, however the in situ environment was more dynamic and the distribution and concentrations of dissolved oxygen were more complex and correlated to irradiance, temperature and biological activity. Microsensor technology provides us with the opportunity to study, at very high resolutions, the upper irradiated; photosynthetically active regions of aquatic sediments along with anoxic processes deeper in sub-euphotic regions of the sediments.

PARCERIA ENTRE UNIVERSIDADE E ENTIDADES EMPRESARIAIS NO GRANDE ABC PAULISTA: A INTEGRAÇÃO ENSINO-PESQUISA E A PRÁTICA EMPRESARIAL

O Brasil situa-se, no início da década de 2010, dentro de um sistema econômico mundial que apresenta características de ampla globalização dos mercados e alta competitividade das organizações que compõe esse sistema, e que sinalizam a necessidade de profissionais que sejam agentes de mudança nesses contextos dinâmicos e repletos de desafios. Na maioria dos países, a maturidade do sistema de inovação está ligada ao investimento em Pesquisa e Desenvolvimento (P&D) e ao volume de geração de Propriedade Intelectual (PI). O Brasil, apesar de apresentar um Produto Interno Bruto (PIB) concentrado nos setores de agropecuária e de serviços, revela um nível de inovação gerado pelo setor produtivo e o seu consequente investimento em P&D muito baixos em comparação com a evolução desse mesmo PIB, denotando com isso que as empresas buscam, em seus países de origem, soluções já desenvolvidas e patenteadas para seu desenvolvimento ou procuram transferir a responsabilidade de produzir registros e patentes de inovações à academia. A integração da cultura acadêmica com a cultura empresarial é capaz de gerar benefícios mútuos, melhorando a competitividade do país; em outras palavras, é uma maneira de transformar o conhecimento em riqueza. Este trabalho relacionando os conceitos ensino-pesquisa e prática empresarial pretende estudar, sob o enfoque da realidade apresentada pelos Planos Estratégicos Regionais (PER) da Região do Grande ABC Paulista e das diretrizes do Plano Nacional de Pós-Graduação 2011-2020 (PNPG 2011-2020), o processo de integração do conhecimento científico existente entre as Entidades Empresariais (E-E) e as Universidades dessa mesma região. Através da metodologia de pesquisa de estudo de caso, analisaram-se as estratégias propostas pelas universidades e a prática do setor empresarial e as possíveis barreiras apontadas como restrições às interações entre eles. Nosso estudo enfocou a análise da relação entre esses dois atores e apontou as principais barreiras para a otimização dessa parceria, tais como o acesso a recursos, o aumento da competitividade via aumento da credibilidade na relação Universidade Empresa (U-E), o reconhecimento das realidades regionais e o latente descompasso entre o pensamento acadêmico e a realidade empresarial. Além disso, constatou-se a necessidade de uma mais ampla discussão, disseminação e implementação dos documentos setoriais, regionais e nacionais que regulam, esclarecem e fornecem bases estratégicas para o desenvolvimento da relação U-E, como forma de otimização do processo de transformação do conhecimento em riqueza social.

GESTÃO DO CONHECIMENTO EM ARRANJOS PRODUTIVOS LOCAIS ESTUDO DE CASO DO PÓLO BRASILEIRO DE COSMÉTICO EM DIADEMA

Esta pesquisa apresenta um estudo de caso cujo objetivo é analisar se arranjos produtivos locais realizam a prática da gestão do conhecimento. A pesquisa foi realizada junto ao Pólo Brasileiro de Cosmético em Diadema, organização sem fins lucrativos, que articula as ações de micro, pequenas e médias empresas organizadas em fabricantes de cosméticos, produtores de bens e serviços, fornecedores de matéria-prima, prestadores de consultoria, comercializadores, clientes e parceiros. Para atender ao objetivo proposto recorreu-se a recursos quantitativo e qualitativo, com a utilização de formulários eletrônicos estruturados, disponibilizados na internet e técnicas da observação participante, envolvendo visitas previamente agendadas ao Pólo de Cosmético. O material de análise utilizou a pesquisa bibliográfica sobre arranjo produtivo local e gestão do conhecimento, caracterização da região do grande ABC e da cidade de Diadema, dados oficiais, políticas governamentais e entrevistas com o corpo diretivo do Pólo. Foi aplicado o instrumento de Terra (2005) que a partir de sete dimensões (estratégia e alta administração, sistemas de informação e comunicação, cultura organizacional, organização e processos de trabalho, políticas e práticas para a administração de recursos humanos e mensuração de resultados), avaliou se as organizações do arranjo produtivo realizam a prática da gestão do conhecimento. Os resultados obtidos apontaram a existência de práticas de gestão do conhecimento, com índices acima da média, convergindo para o entendimento de que se trata de um processo de gestão empresarial, além de confirmar, a partir de um sistema de intercâmbio social a origem do Pólo e seu desenvolvimento.(AU)

Assembly processes of invertebrate communities in springs across different spatial scales

Il presente lavoro ha lo scopo di comprendere i processi sottesi ai pattern di coesistenza tra le specie di invertebrati sorgentizi, distinguendo tra dinamiche stocastiche e deterministiche. Le sorgenti sono ecosistemi complessi e alcune loro caratteristiche (ad esempio l’insularità, la stabilità termica, la struttura ecotonale “a mosaico”, la frequente presenza di specie rare ed endemiche, o l’elevata diversità in taxa) le rendono laboratori naturali utili allo studio dei processi ecologici, tra cui i processi di assembly. Al fine di studiare queste dinamiche è necessario un approccio multi-scala, per questo motivi sono state prese in considerazione tre scale spaziali. A scala locale è stato compiuto un campionamento stagionale su sette sorgenti (quattro temporanee e tre permanenti) del Monte Prinzera, un affioramento ofiolitico vicino alla città di Parma. In questa area sono stati valutati l’efficacia e l’impatto ambientale di diversi metodi di campionamento e sono stati analizzati i drivers ecologici che influenzano le comunità. A scala più ampia sono state campionate per due volte 15 sorgenti della regione Emilia Romagna, al fine di identificare il ruolo della dispersione e la possibile presenza di un effetto di niche-filtering. A scala continentale sono state raccolte informazioni di letteratura riguardanti sorgenti dell’area Paleartica occidentale, e sono stati studiati i pattern biogeografici e l’influenza dei fattori climatici sulle comunità. Sono stati presi in considerazione differenti taxa di invertebrati (macroinvertebrati, ostracodi, acari acquatici e copepodi), scegliendo tra quelli che si prestavano meglio allo studio dei diversi processi in base alle loro caratteristiche biologiche e all’approfondimento tassonomico raggiungibile. I campionamenti biologici in sorgente sono caratterizzati da diversi problemi metodologici e possono causare impatti sugli ambienti. In questo lavoro sono stati paragonati due diversi metodi: l’utilizzo del retino con un approccio multi-habitat proporzionale e l’uso combinato di trappole e lavaggio di campioni di vegetazione. Il retino fornisce dati più accurati e completi, ma anche significativi disturbi sulle componenti biotiche e abiotiche delle sorgenti. Questo metodo è quindi raccomandato solo se il campionamento ha come scopo un’approfondita analisi della biodiversità. D’altra parte l’uso delle trappole e il lavaggio della vegetazione sono metodi affidabili che presentano minori impatti sull’ecosistema, quindi sono adatti a studi ecologici finalizzati all’analisi della struttura delle comunità. Questo lavoro ha confermato che i processi niche-based sono determinanti nello strutturare le comunità di ambienti sorgentizi, e che i driver ambientali spiegano una rilevante percentuale della variabilità delle comunità. Infatti le comunità di invertebrati del Monte Prinzera sono influenzate da fattori legati al chimismo delle acque, alla composizione e all’eterogeneità dell’habitat, all’idroperiodo e alle fluttuazioni della portata. Le sorgenti permanenti mostrano variazioni stagionali per quanto riguarda le concentrazioni dei principali ioni, mentre la conduttività, il pH e la temperatura dell’acqua sono più stabili. È probabile che sia la stabilità termica di questi ambienti a spiegare l’assenza di variazioni stagionali nella struttura delle comunità di macroinvertebrati. L’azione di niche-filtering delle sorgenti è stata analizzata tramite lo studio della diversità funzionale delle comunità di ostracodi dell’Emilia-Romagna. Le sorgenti ospitano più del 50% del pool di specie regionale, e numerose specie sono state rinvenute esclusivamente in questi habitat. Questo è il primo studio che analizza la diversità funzionale degli ostracodi, è stato quindi necessario stilare una lista di tratti funzionali. Analizzando il pool di specie regionale, la diversità funzionale nelle sorgenti non è significativamente diversa da quella misurata in comunità assemblate in maniera casuale. Le sorgenti non limitano quindi la diversità funzionale tra specie coesistenti, ma si può concludere che, data la soddisfazione delle esigenze ecologiche delle diverse specie, i processi di assembly in sorgente potrebbero essere influenzati da fattori stocastici come la dispersione, la speciazione e le estinzioni locali. In aggiunta, tutte le comunità studiate presentano pattern spaziali riconoscibili, rivelando una limitazione della dispersione tra le sorgenti, almeno per alcuni taxa. Il caratteristico isolamento delle sorgenti potrebbe essere la causa di questa limitazione, influenzando maggiormente i taxa a dispersione passiva rispetto a quelli a dispersione attiva. In ogni caso nelle comunità emiliano-romagnole i fattori spaziali spiegano solo una ridotta percentuale della variabilità biologica totale, mentre tutte le comunità risultano influenzate maggiormente dalle variabili ambientali. Il controllo ambientale è quindi prevalente rispetto a quello attuato dai fattori spaziali. Questo risultato dimostra che, nonostante le dinamiche stocastiche siano importanti in tutte le comunità studiate, a questa scala spaziale i fattori deterministici ricoprono un ruolo prevalente. I processi stocastici diventano più influenti invece nei climi aridi, dove il disturbo collegato ai frequenti eventi di disseccamento delle sorgenti provoca una dinamica source-sink tra le diverse comunità. Si è infatti notato che la variabilità spiegata dai fattori ambientali diminuisce all’aumentare dell’aridità del clima. Disturbi frequenti potrebbero provocare estinzioni locali seguite da ricolonizzazioni di specie provenienti dai siti vicini, riducendo la corrispondenza tra gli organismi e le loro richieste ambientali e quindi diminuendo la quantità di variabilità spiegata dai fattori ambientali. Si può quindi concludere che processi deterministici e stocastici non si escludono mutualmente, ma contribuiscono contemporaneamente a strutturare le comunità di invertebrati sorgentizi. Infine, a scala continentale, le comunità di ostracodi sorgentizi mostrano chiari pattern biogeografici e sono organizzate lungo gradienti ambientali principalmente collegati altitudine, latitudine, temperatura dell’acqua e conducibilità. Anche la tipologia di sorgente (elocrena, reocrena o limnocrena) è influente sulla composizione delle comunità. La presenza di specie rare ed endemiche inoltre caratterizza specifiche regioni geografiche.

High-performance human resource practices, citizenship behaviour and organizational performance:A relational perspective

Taking a relational perspective on the employment relationship, we examined processes (mediation and moderation) linking high-performance human resource practices and productivity and turnover, two indicators of organizational performance. Multilevel analysis of data from hotels in the People's Republic of China revealed that service-oriented organizational citizenship behavior (OCB) partially mediated the relationships between high-performance human resource practices and both performance indicators. Unemployment rate moderated the service-oriented OCB-turnover relationship, and business strategy (service quality) moderated the service-oriented OCB-productivity relationship. Copyright of the Academy of Management, all rights reserved.

"High commitment" strategies:it ain't what you do; it's the way that you do it

Purpose: This paper sets out to contribute to the advancement of knowledge, particularly with regard to the processes of implementation and the role of managers engaged in such high commitment strategies and work practices. Design/methodology/approach: This study is part of a research project investigating the extent to which employee involvement predicts job performance (as well as job satisfaction, wellbeing and organisational commitment) in the NHS, using both quantitative and qualitative methods. The main focus of this paper is to present evidence from four of the 20 case studies to show the barriers to implementing employee involvement as well as highlighting the techniques and practices that have proven to be most successful. Findings: Employee involvement is used successfully by management and has enabled frontline staff to contribute their knowledge to their work. Research limitations/implications: The ethical issues of confidentiality and anonymity permeated the research process throughout. Practical implications: The link between "high commitment" strategies and organisational performance is of great interest to academics and practitioners alike. One of these "high commitment" strategies, namely employee involvement, has been an important HR strategy for the NHS in the UK. Originality/value: Other organisations can learn from the findings by implementing the successful parts. © Emerald Group Publishing Limited.

It's what you do and the way that you do it:team task, team size, and innovation-related group processes

This article describes a study of the relationships between team inputs (task type and team size) and team processes in 87 cross industry Portuguese teams, some of which had high and some low requirements to innovate. Team processes were measured using the Team Climate Inventory (TCI), which focuses on clarity of and commitment to team objectives, levels of participation, support for innovation, and quality emphases. Three hypotheses were tested. The first proposed that teams carrying out tasks with a high innovation requirement would have high scores on a measure of team processes. This was supported insofar as such teams reported higher levels of participation and support for innovation. The second hypothesis proposed that large teams would have poorer team processes. This hypothesis was confirmed. The third hypothesis concerned the interaction between size and innovation. The results suggested that large teams operating under a relatively high pressure to innovate have poorer team processes than large teams that do not have a high requirement to innovate.

Marking high-technology market evolution through the foci of market stories:the case of local area networks

Previous research suggests that changing consumer and producer knowledge structures play a role in market evolution and that the sociocognitive processes of product markets are revealed in the sensemaking stories of market actors that are rebroadcasted in commercial publications. In this article, the authors lend further support to the story-based nature of market sensemaking and the use of the sociocognitive approach in explaining the evolution of high-technology markets. They examine the content (i.e., subject matter or topic) and volume (i.e., the number) of market stories and the extent to which content and volume of market stories evolve as a technology emerges. Data were obtained from a content analysis of 10,412 article abstracts, published in key trade journals, pertaining to Local Area Network (LAN) technologies and spanning the period 1981 to 2000. Hypotheses concerning the evolving nature (content and volume) of market stories in technology evolution are tested. The analysis identified four categories of market stories - technical, product availability, product adoption, and product discontinuation. The findings show that the emerging technology passes initially through a 'technical-intensive' phase whereby technology related stories dominate, through a 'supply-push' phase, in which stories presenting products embracing the technology tend to exceed technical stories while there is a rise in the number of product adoption reference stories, to a 'product-focus' phase, with stories predominantly focusing on product availability. Overall story volume declines when a technology matures as the need for sensemaking reduces. When stories about product discontinuation surface, these signal the decline of current technology. New technologies that fail to maintain the 'product-focus' stage also reflect limited market acceptance. The article also discusses the theoretical and managerial implications of the study's findings. © 2002 Elsevier Science Inc. All rights reserved.

Investigation of the effects of low energy high dose ion bombardment in metals and compound semiconductors

The effect of low energy nitrogen molecular ion beam bombardment on metals and compound semiconductors has been studied, with the aim to investigate at the effects of ion and target properties. For this purpose, nitrogen ion implantation in aluminium, iron, copper, gold, GaAs and AIGaAs is studied using XPS and Angle Resolve XPS. A series of experimental studies on N+2 bombardment induced compositional changes, especially the amount of nitrogen retained in the target, were accomplished. Both monoenergetic implantation and non-monoenergetic ion implantation were investigated, using the VG Scientific ESCALAB 200D system and a d. c. plasma cell, respectively. When the samples, with the exception of gold, are exposed to air, native oxide layers are formed on the surfaces. In the case of monoenergetic implantation, the surfaces were cleaned using Ar+ beam bombardment prior to implantation. The materials were then bombarded with N2+ beam and eight sets of successful experiments were performed on each sample, using a rastered N2+ ion beam of energy of 2, 3, 4 and 5 keV with current densities of 1 μA/cm2 and 5 μA/cm22 for each energy. The bombarded samples were examined by ARXPS. After each complete implantation, XPS depth profiles were created using Ar+ beam at energy 2 ke V and current density 2 μA/cm2 . As the current density was chosen as one of the parameters, accurate determination of current density was very important. In the case of glow discharge, two sets of successful experiments were performed in each case, by exposing the samples to nitrogen plasma for the two conditions: at low pressure and high voltage and high pressure and low voltage. These samples were then examined by ARXPS. On the theoretical side, the major problem was prediction of the number of ions of an element that can be implanted in a given matrix. Although the programme is essentially on experimental study, but an attempt is being made to understand the current theoretical models, such as SATVAL, SUSPRE and TRIM. The experimental results were compared with theoretical predictions, in order to gain a better understanding of the mechanisms responsible. From the experimental results, considering possible experimental uncertainties, there is no evidence of significant variation in nitrogen saturation concentration with ion energy or ion current density in the range of 2-5 ke V, however, the retention characteristics of implantant seem to strongly depend on the chemical reactivity between ion species and target material. The experimental data suggests the presence of at least one thermal process. The discrepancy between the theoretical and experimental results could be the inability of the codes to account for molecular ion impact and thermal processes.

Mechanisms for triggering high-voltage breakdown in vacuum

The electrical and optical characteristics of a cylindrical alumina insulator (94% Al203) have been measured under ultra-high vacuum (P < 10-8 mBar) conditions. A high-resolution CCD camera was used to make real-time optical recordings of DC prebreakdown luminescence from the ceramic, under conditions where DC current magnitudes were limited to less than 50μA. Two concentric metallized rings formed a pair of co-axial electrodes, on the end-face of the alumina tube; a third 'transparent' electrode was employed to study the effect of an orthogonal electric field upon the radial conduction processes within the metallized alumina specimen. The wavelength-spectra of the emitted light was quantified using a high-speed scanning monochromator and photo-multiplier tube detector. Concurrent electrical measurements were made alongside the recording of optical-emission images. An observed time-dependence of the photon-emission is correlated with a time-variation observed in the DC current-voltage characteristics of the alumina. Optical images were also recorded of pulsed-field surface-flashover events on the alumina ceramic. An intensified high-speed video technique provided 1ms frames of surface-flashover events, whilst 100ns frames were achieved using an ultra high-speed fast-framing camera. By coupling this fast-frame camera to a digital storage oscilloscope, it was possible to establish a temporal correlation between the application of a voltage-pulse to the ceramic and the evolution of photonic emissions from the subsequent surface-flashover event. The electro-optical DC prebreakdown characteristics of the alumina are discussed in terms of solid-state photon-emission processes, that are believed to arise from radiative electron-recombination at vacancy-defects and substitutional impurity centres within the surface-layers of the ceramic. The physical nature of vacancy-defects within an alumina dielectric is extensively explored, with a particular focus placed upon the trapped electron energy-levels that may be present at these defect centres. Finally, consideration is given to the practical application of alumina in the trigger-ceramic of a sealed triggered vacuum gap (TVG) switch. For this purpose, a physical model describing the initiation of electrical breakdown within the TVG regime is proposed, and is based upon the explosive destabilisation of trapped charge within the alumina ceramic, triggering the onset of surface-flashover along the insulator. In the main-gap prebreakdown phase, it is suggested that the electrical-breakdown of the TVG is initiated by the low-field 'stripping' of prebreakdown electrons from vacancy-defects in the ceramic under the influence of an orthogonal main-gap electric field.

The production of clinical dextran using membrane processes

Clinical dextran is used as a blood volume expander. The British Pharmacopeia (BP) specification for this product requires the amount of dextran below 12,000 MW and above 98,000 MW to be strictly controlled. Dextran is presently fractionated industrially using ethanol precipitation. The aim of this work was to develop an ultrafiltration system which could replace the present industrial process. Initially these molecular weight (MW) bands were removed using batch ultrafiltration. A large number of membranes were tested. The correct BP specification could be achieved using these membranes but there was a significant loss of saleable material. To overcome this problem a four stage ultrafiltration cascade (UFC) was used. This work is the first known example of a UFC being used to remove both the high and low MW dextran. To remove the high MW material it was necessary to remove 90% of the MW distribution and retain the remaining 10%. The UFC significantly reduced the amount of dialysate required. To achieve the correct specification below 12,000 MW, the UFC required only 2.5 - 3.0 diavolumes while the batch system required 6 - 7. The UFC also improved the efficiency of the fractionation process. The UFC could retain up to 96% of the high MW material while the batch system could only retain 82.5% using the same number of diavolumes. On average the UFC efficiency was approximately 10% better than the equivalent batch system. The UFC was found to be more predictable than the industrial process and the specification of the final product was easier to control. The UFC can be used to improve the fractionation of any polymer and also has several other potential uses including enzyme purification. A dextransucrase bioreactor was also developed. This preliminary investigation highlighted the problems involved with the development of a successful bioreactor for this enzyme system.

Lipoidal species in ocular spoilation processes

Tear component deposition onto contact lenses is termed `spoilation' and occurs due to the interaction of synthetic polymers with their biological fluid environment. Spoilation phenomena alter the physico-chemical properties of hydrophilic contact lenses, diminishing the optical properties of the lens; causing discomfort and complications for the wearer. Eventually these alterations render the lens unwearable. The primary aim of this interdisciplinary study was to develop analytical techniques capable of analysing the minute quantities of biological deposition involved, in particular the lipid fraction. Prior to this work such techniques were unavailable for single contact lenses. It is envisaged that these investigations will further the understanding of this biological interfacial conversion. Two main analytical techniques were developed: a high performance liquid chromatography (HPLC) technique and fluorescence spectrofluorimetry. The HPLC method allows analysis of a single contact lens and provided previously unavailable valuable information about variations in the lipid profiles of deposited contact lenses and patient tear films. Fluorescence spectrophotofluorimetry is a sensitive non-destructive technique for observing changes in the fluorescence intensity of biological components on contact lenses. The progression and deposition of tear materials can be monitored and assessed for both in vivo and in vitro spoiled lenses using this technique. An improved in vitro model which is comparable to tears and chemically mimics ocular spoilation was also developed. This model allows the controlled study of extrinsic factors and hydrogel compositions. These studies show that unsaturated tear lipids, probably unsaturated fatty acids, are involved in the interfacial conversion of hydrogel lenses, rendering them incompatible with the ocular microenvironment. Lipid interaction with the lens surface then facilitates secondary deposition of other tear components. Interaction, exchange and immobilisation (by polymerisation) of the lipid layer appears to occur before the final and rapid growth of more complex, insoluble discrete deposits, sometimes called `white spots'.