Study of the calibration method of pressure-velocity probes and its application in a field of progressive plane waves

This dissertation presents a calibration procedure for a pressure velocity probe. The dissertation is divided into four main chapters. The first chapter is divided into six main sections. In the firsts two, the wave equation in fluids and the velocity of sound in gases are calculated, the third section contains a general solution of the wave equation in the case of plane acoustic waves. Section four and five report the definition of the acoustic impedance and admittance, and the practical units the sound level is measured with, i.e. the decibel scale. Finally, the last section of the chapter is about the theory linked to the frequency analysis of a sound wave and includes the analysis of sound in bands and the discrete Fourier analysis, with the definition of some important functions. The second chapter describes different reference field calibration procedures that are used to calibrate the P-V probes, between them the progressive plane wave method, which is that has been used in this work. Finally, the last section of the chapter contains a description of the working principles of the two transducers that have been used, with a focus on the velocity one. The third chapter of the dissertation is devoted to the explanation of the calibration set up and the instruments used for the data acquisition and analysis. Since software routines were extremely important, this chapter includes a dedicated section on them and the proprietary routines most used are thoroughly explained. Finally, there is the description of the work that has been done, which is identified with three different phases, where the data acquired and the results obtained are presented. All the graphs and data reported were obtained through the Matlab® routine. As for the last chapter, it briefly presents all the work that has been done as well as an excursus on a new probe and on the way the procedure implemented in this dissertation could be applied in the case of a general field.

Predicting residual stiffness of cracked composite laminates subjected to multi-axial in-plane loading

Peer reviewed

Predicting residual stiffness of cracked composite laminates subjected to multi-axial in-plane loading

Peer reviewed

Beyond local search:bridging platforms and inter-sectoral technological integration

This paper explores the dynamics of inter-sectoral technological integration by introducing the concept of bridging platform as a node of pervasive technologies, whose collective broad applicability may enhance the connection between ‘distant’ knowledge by offering a technological coupling. Using data on patents obtained from the CRIOS-PATSTAT database for four EU countries (Germany, UK, France and Italy), we provide empirical evidence that bridging platforms are likely to connect more effectively innovations across distant technological domains, fostering inter-sectoral technological integration and the development of original innovation. Public research organisations are also found to play a crucial role in terms of technological integration and original innovation due to their higher capacity to access and use bridging platforms within their innovation activities.

A recessionary debate: who suffered more? A study of sectoral well-being and economic insecurity in Ireland

The aim of this thesis is to identify the relationship between subjective well-being and economic insecurity for public and private sector workers in Ireland using the European Social Survey 2010-2012. Life satisfaction and job satisfaction are the indicators used to measure subjective well-being. Economic insecurity is approximated by regional unemployment rates and self-perceived job insecurity. Potential sample selection bias and endogeneity bias are accounted for. It is traditionally believed that public sector workers are relatively more protected against insecurity due to very institution of public sector employment. The institution of public sector employment is made up of stricter dismissal practices (Luechinger et al., 2010a) and less volatile employment (Freeman, 1987) where workers are subsequently less likely to be affected by business cycle downturns (Clark and Postal-Vinay, 2009). It is found in the literature that economic insecurity depresses the well-being of public sector workers to a lesser degree than private sector workers (Luechinger et al., 2010a; Artz and Kaya, 2014). These studies provide the rationale for this thesis in testing for similar relationships in an Irish context. Sample selection bias arises when a selection into a particular category is not random (Heckman, 1979). An example of this is non-random selection into public sector employment based on personal characteristics (Heckman, 1979; Luechinger et al., 2010b). If selection into public sector employment is not corrected for this can lead to biased and inconsistent estimators (Gujarati, 2009). Selection bias of public sector employment is corrected for by using a standard Two-Step Heckman Probit OLS estimation method. Following Luechinger et al. (2010b), the propensity for individuals to select into public sector employment is estimated by a binomial probit model with the inclusion of the additional regressor Irish citizenship. Job satisfaction is then estimated by Ordinary Least Squares (OLS) with the inclusion of a sample correction term similar as is done in Clark (1997). Endogeneity is where an independent variable included in the model is determined within in the context of the model (Chenhall and Moers, 2007). The econometric definition states that an endogenous independent variable is one that is correlated with the error term (Wooldridge, 2010). Endogeneity is expected to be present due to a simultaneous relationship between job insecurity and job satisfaction whereby both variables are jointly determined (Theodossiou and Vasileiou, 2007). Simultaneity, as an instigator of endogeneity, is corrected for using Instrumental Variables (IV) techniques. Limited Information Methods and Full Information Methods of estimation of simultaneous equations models are assed and compared. The general results show that job insecurity depresses the subjective well-being of all workers in both the public and private sectors in Ireland. The magnitude of this effect differs among sectoral workers. The subjective well-being of private sector workers is more adversely affected by job insecurity than the subjective well-being of public sector workers. This is observed in basic ordered probit estimations of both a life satisfaction equation and a job satisfaction equation. The marginal effects from the ordered probit estimation of a basic job satisfaction equation show that as job insecurity increases the probability of reporting a 9 on a 10-point job satisfaction scale significantly decreases by 3.4% for the whole sample of workers, 2.8% for public sector workers and 4.0% for private sector workers. Artz and Kaya (2014) explain that as a result of many austerity policies implemented to reduce government expenditure during the economic recession, workers in the public sector may for the first time face worsening perceptions of job security which can have significant implications for their well-being (Artz and Kaya, 2014). This can be observed in the marginal effects where job insecurity negatively impacts the well-being of public sector workers in Ireland. However, in accordance with Luechinger et al. (2010a) the results show that private sector workers are more adversely impacted by economic insecurity than public sector workers. This suggests that in a time of high economic volatility, the institution of public sector employment held and was able to protect workers against some of the well-being consequences of rising insecurity. In estimating the relationship between subjective well-being and economic insecurity advanced econometric issues arise. The results show that when selection bias is corrected for, any statistically significant relationship between job insecurity and job satisfaction disappears for public sector workers. Additionally, in order to correct for endogeneity bias the simultaneous equations model for job satisfaction and job insecurity is estimated by Limited Information and Full Information Methods. The results from two different estimators classified as Limited Information Methods support the general findings of this research. Moreover, the magnitude of the endogeneity-corrected estimates are twice as large as those not corrected for endogeneity bias which is similarly found in Geishecker (2010, 2012). As part of the analysis into the effect of economic insecurity on subjective well-being, the effects of other socioeconomic variables and work-related variables are examined for public and private sector workers in Ireland.

GeoGebraTUTOR : développement d’un système tutoriel autonome pour l’accompagnement d’élèves en situation de résolution de problèmes de démonstration en géométrie plane et genèse d’un espace de travail géométrique idoine

Travaux d'études doctorales réalisées conjointement avec les travaux de recherches doctorales de Nicolas Leduc, étudiant au doctorat en génie informatique à l'École Polytechnique de Montréal.

Comparison of two methods for measuring the pubococcygeal line from sagittal-plane magnetic resonance imaging

Aims The pubococcygeal line (PCL) is an important reference line for determining measures of pelvic organ support on sagittal-plane magnetic resonance imaging (MRI); however, there is no consensus on where to place the posterior point of the PCL. As coccyx movement produced during pelvic floor muscle (PFM) contractions may affect other measures, optimal placement of the posterior point is important. This study compared two methods for measuring the PCL, with different posterior points, on T2-weighted sagittal MRI to determine the effect of coccygeal movement on measures of pelvic organ support in older women. Methods MRI of the pelvis was performed in the midsagittal plane, at rest and during PFM contractions, on 47 community-dwelling women 60 and over. The first PCL was measured to the tip of the coccyx (PCLtip) and the second to the sacrococcygeal joint (PCLjnt). Four measures of pelvic organ support were made using each PCL as the reference line: urethrovesical junction height, uterovaginal junction height, M-line and levator plate angle. Results During the PFM contraction the PCLtip shortened and lifted (P < 0.001); the PCLjnt did not change (P > 0.05). The changes in the four measures of pelvic organ support were smaller when measured relative to the PCLtip as compared to those to the PCLjnt (P < 0.001). Conclusions Coccyx movement affected the length and position of the PCLtip, which resulted in underestimates of the pelvic-organ lift produced by the PFM contraction. Therefore, we recommend that the PCL be measured to the sacrococcygeal joint and not to the tip of the coccyx

Ultra Compact Inline E-Plane Waveguide Bandpass Filters Using Cross Coupling

This paper presents novel ultra-compact waveguide bandpass filters that exhibit pseudo elliptic responses with ability to place transmission zeros on both sides of the passband to form sharp roll offs. The filters contain E plane extracted pole sections cascaded with cross-coupled filtering blocks. Compactness is achieved by the use of evanescent mode sections and closer arranged resonators modified to shrink in size. The filters containing non-resonating nodes are designed by means of the generalized coupling coefficients (GCC) extraction procedure for the cross-coupled filtering blocks and extracted pole sections. We illustrate the performance of the proposed structures through the design examples of a third and a fourth order filters with center frequencies of 9.2 GHz and 10 GHz respectively. The sizes of the proposed structures suitable for fabricating using the low cost E plane waveguide technology are 38% smaller than ones of the E plane extracted pole filter of the same order.

Discovery of a New Retrograde Trans-Neptunian Object: Hint of a Common Orbital Plane for Low Semimajor Axis, High-inclination TNOs and Centaurs

Although the majority of Centaurs are thought to have originated in the scattered disk, with the high-inclination members coming from the Oort cloud, the origin of the high-inclination component of trans-Neptunian objects (TNOs) remains uncertain. We report the discovery of a retrograde TNO, which we nickname “Niku,” detected by the Pan-STARRS 1 Outer Solar System Survey. Our numerical integrations show that the orbital dynamics of Niku are very similar to that of 2008 KV42 (Drac), with a half-life of ˜500 Myr. Comparing similar high-inclination TNOs and Centaurs (q > 10 au, a <100 au, and i > 60°), we find that these objects exhibit a surprising clustering of ascending node, and occupy a common orbital plane. This orbital configuration has high statistical significance: 3.8-σ. An unknown mechanism is required to explain the observed clustering. This discovery may provide a pathway to investigating a possible reservoir of high-inclination objects.

Plane detection from monocular image sequences

AIRES, Kelson R. T. ; ARAÚJO, Hélder J. ; MEDEIROS, Adelardo A. D. . Plane Detection from Monocular Image Sequences. In: VISUALIZATION, IMAGING AND IMAGE PROCESSING, 2008, Palma de Mallorca, Spain. Proceedings..., Palma de Mallorca: VIIP, 2008

Plane Detection Using Affine Homography

AIRES, Kelson R. T.; ARAÚJO, Hélder J.; MEDEIROS, Adelardo A. D. Plane Detection Using Affine Homography. In: CONGRESSO BRASILEIRO DE AUTOMÁTICA, 2008, Juiz de Fora, MG: Anais... do CBA 2008.

Modular catalyst: from the tiling of a water plane to the design of a floating structure

La tesi nasce dalla volontà di agire sull’area della Darsena di Ravenna, strategica in quanto via d’acqua navigabile che congiunge il mare con il centro città ma dal potenziale ancora poco sfruttato. Il progetto è studiato per essere inserito come catalizzatore urbano, creando spazi di interazione attraverso elementi modulari galleggianti e riconfigurabili per adattarsi a programmi d’uso flessibili; tali elementi si aggregano formando un sistema che ristruttura lo spazio dell’attuale banchina, cambiandone la percezione da barriera a waterfront urbano. La necessità di ottenere una struttura con capacità di crescita e flessibilità programmatica sfocia in un approccio modulare seguendo il principio massima variazione/minimo numero di elementi i cui principi aggregativi si basano sulla tassellazione “Cairo”. Vengono studiate le possibilità di incorporare variazione ed eterogeneità all’interno del sistema senza comprometterne la modularità fino ad integrare percorsi multilivello. La definizione delle morfologie delle parti che compongono i moduli si basano sullo studio dei principi di galleggiamento, stabilità e yacht design: a partire dalla forma dello scafo adatta ai principi di tiling definiti in precedenza, tutte le parti che compongono le varie tipologie di modulo sono progettate cercando continuità e integrazione tettonica (geometrica, strutturale, funzionale e percettiva). Vengono proposte soluzioni integrate sia per le problematiche tipiche delle strutture galleggianti sia per l’inserimento di attività all’interno della soluzione architettonica. Vengono prototipati di una serie di moduli, scelti in modo da dimostrare i principi di ricombinazione, continuità, modularità e tiling.

A Game of Horns: Transnational Flows of Rhino Horn

A multi-sectorial regime of protection including international treaties, conservation and security measures, demand reduction campaigns and quasi-military interventions has been established to protect rhinos. Despite these efforts, the poaching of rhinos and trafficking of rhino horn continue unabated. This dissertation asks why the illegal market in rhinoceros horn is so resilient in spite of the myriad measures employed to disrupt it. A theoretical approach grounded in the sociology of markets is applied to explain the structure and functioning of the illegal market. The project follows flows of rhino horn from the source in southern Africa to illegal markets in Southeast Asia. The multi-sited ethnography included participant observations, interviews and focus groups with 416 informants during fourteen months of fieldwork. The sample comprised of, amongst others, convicted and active rhino poachers, smugglers and kingpins, private rhino breeders and hunting outfitters, African and Asian law enforcement officials, as well as affected local communities and Asian consumers. Court files, CITES trade data, archival materials, newspaper reports and social media posts were also analysed to supplement findings and to verify and triangulate data from interviews, focus groups and observations. Central to the analysis is the concept of “contested illegality”, a legitimization mechanism employed by market participants along the different segments of the horn supply chain. These actors' implicit or explicit contestation of the state-sponsored label of illegality serves as a legitimising and enabling mechanism, facilitating participation in gray or illegal markets for rhino horn. The research identified fluid interfaces between legal, illegal and gray markets, with recurring actors who have access to transnational trade structures, and who also possess market and product knowledge, as well as information about the regulatory regime and its loopholes. It is against the background of colonial, apartheid and neoliberal exploitation and marginalization of local communities that a second argument is introduced: the path dependency of conservation paradigms. Underpinning rhino conservation and regulation are archaic and elitist conservation regimes that discount the potential for harmonious relationships between local communities and wildlife. The increasing militarization of anti-poaching measures and green land grabs are exacerbating the rhino problem by alienating communities further from conservation areas and wild animals. The third argument looks at how actors deal with coordination problems in transnational illegal markets. Resolving the coordination problems of cooperation, value and competition are considered essential to the operation of formal markets. It is argued that the problem of security provides an additional and crucial obstacle to actors transacting in markets. The systematic analysis of flows between the researched sites of production, distribution and consumption of rhino horn shows that the social embeddedness of actors facilitates the flourishing of illegal markets in ways that escape an effective enforcement of CITES regulations.

Cross-sectoral differences in the drivers of innovation: evidence from the Irish Community Innovation Survey

Purpose: The purpose of this paper is to analyse differences in the drivers of firm innovation performance across sectors. The literature often makes the assumption that firms in different sectors differ in their propensity to innovate but not in the drivers of innovation. The authors empirically assess whether this assumption is accurate through a series of econometric estimations and tests. Design/methodology/approach: The data used are derived from the Irish Community Innovation Survey 2004-2006. A series of multivariate probit models are estimated and the resulting coefficients are tested for parameter stability across sectors using likelihood ratio tests. Findings: The results indicate that there is a strong degree of heterogeneity in the drivers of innovation across sectors. The determinants of process, organisational, new to firm and new to market innovation varies across sectors suggesting that the pooling of sectors in an innovation production function may lead to biased inferences. Research limitations/implications: The implications of the results are that innovation policies targeted at stimulating innovation need to be tailored to particular industries. One size fits all policies would seem inappropriate given the large degree of heterogeneity observed across the drivers of innovation in different sectors. Originality/value: The value of this paper is that it provides an empirical test as to whether it is suitable to group sectoral data when estimating innovation production functions. Most papers simply include sectoral dummies, implying that only the propensity to innovate differs across sectors and that the slope of the coefficient estimates are in fact consistent across sectors.

Plane detection from monocular image sequences

AIRES, Kelson R. T. ; ARAÚJO, Hélder J. ; MEDEIROS, Adelardo A. D. . Plane Detection from Monocular Image Sequences. In: VISUALIZATION, IMAGING AND IMAGE PROCESSING, 2008, Palma de Mallorca, Spain. Proceedings..., Palma de Mallorca: VIIP, 2008