Postharvest Conservation of Mature-Green and Ripe 'Paluma' Guava Stored at Two Temperatures

This work aimed to establish the importance of maturation and ripeness stages and the use of refrigeration for the conservation of 'Paluma' guavas. Fruit picked at the mature-green and ripe stages were stored at ambient conditions (21 degrees C and 85% RH) and also at 10 degrees C (85% RH). The fruit were evaluated every 2 or 3 days for weight loss, appearance, decay, color, firmness, soluble solids, titratable acidity, ascorbic acid, total polyphenols extractable content and total antioxidant activity. The fruit stored at 21 degrees C had higher weight loss than those stored at 10 degrees C. Mature-green guavas at 21 degrees C remained in good quality for 6 days, but at 10 degrees C, the preservation period increased to 15 days. Ripe fruit were preserved for 4 days at 21 degrees C, which was extended with refrigeration to 6 days. Mature-green fruit at 21 degrees C had decay in 6 days; while at 10 degrees C decay happened in 18 days. The peel color of mature-green fruits, at 21 degrees C, showed increasing values of luminosity, indicating that its color became lighter (change from green to yellow) and at 10 degrees C it showed constant values until the end of storage. Pulp firmness of mature-green fruit declined during storage as a result of ripening. In ripe fruits such reduction occurred more slowly, since they were softer. The color of the pulp became intense red for mature fruits. Soluble solids were lower in ripe fruit at 21 degrees C, while in mature fruits at 10 degrees C, it increased. The titratable acidity increased in fruits stored at 10 degrees C. The fruits kept at 21 degrees C and the mature guavas kept at 10 degrees C showed no changes in ascorbic acid content. The ripe fruit at 10 degrees C maintained their ascorbic acid levels. Mature guavas, stored at 10 degrees C, had the longest shelf life and higher contents of soluble solids and titratable acidity, with no changes in total polyphenols extractable content and total antioxidant activity.

Different origins of green-light photoluminescence emission in structurally ordered and disordered powders of calcium molybdate

A strong greenish-light photoluminescence (PL) emission was measured at room temperature for disordered and ordered powders of CaMoO4 prepared by the polymeric precursor method. The structural evolution from disordered to ordered powders was accompanied by XRD. Raman spectroscopy, and TEM imagery. High-level quantum mechanical calculations in the density functional framework were used to interpret the formation of the structural defects of disorder powders in terms of band diagram and density of states. Complex cluster vacancies [MoO3 center dot V-O(z)] and [CaO7 center dot V-O(z)] (where V-O(z) = V-O(X), V-O(center dot), V-O(center dot center dot)) were suggested to be responsible to the appearance of new states shallow and deeply inserted in the band gap. These defects give rise to the PL in disordered powders. The natural PL emission of ordered CaMoO4 was attributed to an intrinsic slight distortion of the [MoO4] tetrahedral in the short range.

Experimental and theoretical correlation of very intense visible green photoluminescence in BaZrO3 powders

Very intense visible green photoluminescence (PL) was observed at room temperature in structurally ordered-disordered BaZrO3 powders. Ab initio calculations, ultraviolet-visible absorption spectroscopy, electron paramagnetic resonance, and PL were performed. Theoretical and experimental results showed that local defects in the cubic structure caused by [ZrO5 center dot V-O(z)] complex clusters, where V-O(z) = V-O(x), V-O(center dot), and V-O(center dot center dot), play an important role in the formation of hole-electron pairs, giving rise to a charge gradient in the structure which is responsible for PL emission. (c) 2008 American Institute of Physics.

Relationship between green management and environmental training in companies located in Brazil: A theoretical framework and case studies

The main objective of this study is to understand the relationship between green management and environmental training in Brazilian companies, underscoring how this relationship takes place and its most important factors. For such, 9 case studies were conducted at large ISO 14001 certified companies, leaders in their market segments. Several interviews were conducted for each case, documents were collected and visits were made for direct observation. The main contributions and results of this study were: (a) a proposal for a theoretical framework relating the evolutionary stages of green management and the characteristics of environmental training; (b) it was ascertained, as per the proposed theoretical framework, that organizational culture and teamwork, top management support and more technical green management practices are the factors that seem to connect and convert environmental training into more proactive green management, especially for companies in the proactive green management stage; (c) the identification of the co-evolution between the companies' stage of green management and their environmental training level, which is the identified relationship mechanism between environmental training and green management. In other words, the higher the level of adoption of activities recommended for green management, the more evolved the green management practiced at the companies tends to be; and (d) identification that the proposed theoretical framework tends to be useful, mainly because it can explain the relationship between green management and environmental training at the company in the proactive stage. (C) 2012 Elsevier B.V. All rights reserved.

Are supplier selection criteria going green? Case studies of companies in Brazil

Purpose - The purpose of this paper is to verify if Brazilian companies are adopting environmental requirements in the supplier selection process. Further, this paper intends to analyze whether there is a relation between the level of environmental management maturity and the inclusion of environmental criteria in the companies' selection of suppliers.Design/methodology/approach - A review of mainstream literature on environmental management, traditional criteria in the supplier selection process and the incorporation of environmental requirements in this context. The empirical study's strategy is based on five Brazilian case studies with industrial companies. Face-to-face interviews and informal conversations are to be held, explanations made by e-mail with representatives from the purchasing, environmental management, logistics and other areas, and observation and the collection of company documents are also employed.Findings - Based on the cases, it is concluded that companies still use traditional criteria to select suppliers, such as quality and cost, and do not adopt environmental requirements in the supplier selection process in a uniform manner. Evidence found shows that the level of environmental management maturity influences the depth with which companies adopt environmental criteria when selecting suppliers. Thus, a company with more advanced environmental management adopts more formal procedures for selecting environmentally appropriate suppliers than others.Originality/value - This is the first known study to verify if Brazilian companies are adopting environmental requirements in the supplier selection process.

GREEN MACHINING ORIENTED TO DIMINISH DENSITY GRADIENT FOR MINIMIZATION of DISTORTION IN ADVANCED CERAMICS

After sintering advanced ceramics, there are invariably distortions, caused in large part by the heterogeneous distribution of density gradients along the compacted piece. To correct distortions, machining is generally used to manufacture pieces within dimensional and geometric tolerances. Hence, narrow material removal limit conditions are applied, which minimize the generation of damage. Another alternative is machining the compacted piece before sintering, called the green ceramic stage, which allows machining without damage to mechanical strength. Since the greatest concentration of density gradients is located in the outer-most layers of the compacted piece, this study investigated the removal of different allowance values by means of green machining. The output variables are distortion after sintering, tool wear, cutting force, and the surface roughness of the green ceramics and the sintered ones. The following results have been noted: less distortion is verified in the sintered piece after 1mm allowance removal; and the higher the tool wear the worse the surface roughness of both green and sintered pieces.

Influence of nitrogen fertilization and green manure on the economic feasibility of no-tilled wheat in the Cerrado

É importante a busca por melhores rentabilidades para a cultura do trigo por meio de tecnologias que reduzam custos de produção e proporcionem sustentabilidade à agricultura brasileira. Assim, o objetivo deste trabalho foi avaliar a rentabilidade da cultura do trigo em sistema plantio direto, visando reduzir doses de nitrogênio em cobertura, pelo cultivo de adubos verdes anterior ao do trigo. O experimento foi realizado em Selvíria (MS), Brasil, no ano 2009/10. O delineamento utilizado foi o de blocos casualizados com 36 tratamentos, em parcelas subdividas, com quatro repetições. As parcelas foram formadas por seis tipos de adubos verdes (guandu BRS Mandarim, Crotalaria juncea, milheto BRS 1501, pousio e os consórcios milheto + guandu e milheto + crotalária), que forneceram palha para o plantio direto do trigo no inverno, após a cultura de arroz na safra de verão. As subparcelas foram formadas por seis doses de nitrogênio (0, 25, 50,75, 100 e 125 kg ha-1 de N) em uma aplicação em cobertura, ten-do como fonte a ureia. O trigo cultivado, após a semeadura dos adubos verdes na safra de inverno anterior, sem a aplicação de nitrogênio em cobertura e na dose 25 kg ha-1 de N, apresentou com maior frequência custos de produção superior à receita bruta. O custo de produção de trigo cultivado após os consórcios de milheto + guandu e milheto + crotalária na safra de inverno anterior, associado a doses de nitrogênio de 50 e 75 kg ha-1 de N, proporcionou maior lucratividade em relação aos demais adubos verdes avaliados.

Recovery of soil physical properties by green manure, liming, gypsum and pasture and spontaneous native species

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

First in vivo evaluation of the mutagenic effect of Brazilian green propolis by comet assay and micronucleus test

Propolis is a hive product containing chiefly beeswax and plant-derived substances such as resin and volatile compounds. Propolis has been used in various parts of the world as an antiseptic and wound healer since ancient times, and interest in the product has recently increased. Considering the lack of data concerning the in vivo mutagenicity of green propolis, the capacity of this natural product to cause damage to the DNA was evaluated, using the alkaline single-cell gel electrophoresis (SCGE) and micronucleus test, in the peripheral blood cells of mice. The doses tested by gavage were 1000, 1500 and 2000 mg/kg. Micronucleus and SCGE assays showed that green propolis caused an increase in the damage to DNA in the peripheral blood cells of mice. The polychromatic: normochromatic erythrocytes ratio was not statistically different from the negative control. Considering the doses and the results obtained in this study, the acute consumption of green propolis produced some mutagenic effects on the blood cells of mice. (C) 2008 Elsevier Ltd. All rights reserved.

Evaluation of antiulcer activity of the main phenolic acids found in Brazilian Green Propolis

Aim of the study: In a previous study, our group described the gastric protective effect of the hydroalcoholic extract of Brazilian green propolis. The main compounds found in Brazilian green propolis include phenolic acids, such as: caffeic, ferulic, p-coumaric and cinnamic acids. This study was therefore carried out to evaluate the antiulcerogenic property of the main phenolic acids found in Brazilian Green Propolis.Material and methods: The anti-ulcer assays were performed using the following protocols: nonsteroidal-antinflammatory drug (NSAID)-induced ulcer, ethanol-induced ulcer, and stress-induced ulcer. The effects of the phenolic acids on gastric content volume, pH and total acidity, using the pylorus ligated model, were also evaluated.Results: It was observed that treatment using doses of 50 and 250 mg/kg of caffeic, ferulic, p-coumaric and cinnamic acids and positive controls (omeprazol or cimetidine) significantly diminished the lesion index, the total area of the lesion and the percentage of lesion in comparison with the negative control groups. In addition, the percentage of ulcer inhibition was significantly higher in the groups treated with the different phenolic acids, cimetidine or omeprazol, in all the protocols used, compared with the negative control groups. In the model to determine gastric secretion, using ligated pylorus, treatment with phenolic acids and cimetidine reduced the volume of gastricjuice and total acidity and significantly increased the gastric pH (p < 0.05), compared with the control group, with the exception of the group treated with 50 mg/kg of p-coumaric acid, in which no significant difference was observed, compared with the control. In relation to the acute toxicity, none sign of toxicity was observed when phenolic acids, used in this study, were administered for rats in dose of 2000 mg/kg.Conclusions: In conclusion, the results of this study show that caffeic, ferulic, p-coumaric and cinnamic acids display antiulcer activity. (c) 2008 Elsevier B.V. All rights reserved.