糯小麦杂交后代的基因型鉴定及Wx基因的效应研究

糯小麦在食品加工业、淀粉加工业及其它工业上有着重要用途，是近年来许多国家小麦研究的重要课题。国外糯小麦选育尚未突破高产与糯性相结合的难点，国内目前还没有培育出高蛋白强筋型的糯小麦品种，这在一定程度上与缺乏合适的育种方法和高效、实用的糯小麦分子标记辅助育种技术有关。国内外对Wx基因效应的研究主要利用缺体－四体系、重组自交系或近等基因系，还未见有利用遗传背景相同的BC5F2代回交改良群体的报道。 糯性位点近等基因系是小麦淀粉品质育种的重要材料，而我国目前还没有一套中国栽培小麦遗传背景的糯性位点近等基因系。为了选育部分糯小麦、全糯小麦和中国栽培小麦遗传背景的糯性位点近等基因系，我们利用Wx蛋白电泳和高效实用的分子标记技术体系来鉴定糯小麦杂交后代的基因型，结果证明该体系能有效地用于糯小麦的分子标记辅助育种。以中国春糯性位点全套近等基因系为研究材料，对小麦Wx基因的6个STS标记和1个CAPS标记进行了筛选，改良PCR扩增条件以及产物检测方式后，从这些标记中筛选出3个标记，包括鉴定Wx-A1、Wx-D1位点的2个共显性STS标记和Wx-B1位点的1个显性STS标记。利用上述3个分子标记从BC5F2 代回交改良群体中筛选出了8种Wx基因型，经卡方检验，其分离比符合3对基因的分离比例，其中基因型为aabbdd的植株有2株，直链淀粉含量分别为1.81%和0.82%，为全糯小麦；基因型为AAbbdd，aabbDD的部分糯性植株各有1株，直链淀粉含量分别为15.24%和17.57%。以上4株植株的农艺性状和品质性状接近回交亲本“川育12”，并明显优于全糯材料“98Y1441”，表明采用回交法与Wx基因分子标记辅助选择相结合，有助于培育高产、优质的全糯和部分糯小麦。同时，本研究中建立的分子标记技术体系，也为选育具有中国栽培小麦遗传背景的糯性位点近等基因系奠定了基础。 在基因型鉴定的基础上，利用糯小麦杂交后代BC5F2代回交改良群体研究了各基因缺失降低直链淀粉含量的效果和各基因合成直链淀粉的能力，以及直链淀粉含量与农艺性状、品质性状、淀粉糊化特性等的相关性。缺失不同Wx基因的8种基因型，直链淀粉含量差异显著。研究单缺失基因型发现，减少效应最大的是Wx-B1b基因，Wx-B1b和Wx-D1b基因没有显著差异，减少效应最小的是Wx-A1b基因。研究双缺失基因型发现，Wx基因合成直链淀粉的能力，Wx-B1a基因最高，Wx-A1a基因最低，而Wx-B1a和Wx-D1a基因差异很小；直链淀粉含量与株高、穗长、小穗数、穗粒数、千粒重等农艺性状相关不显著，表明淀粉品质育种可以与高产育种实现有机结合；直链淀粉含量与SDS-沉降值呈显著负相关(r=-0.726)，说明直链淀粉含量降低在一定程度上有利于提高小麦营养与加工品质，这一结果至今未见有文献报道；全糯类型的淀粉糊化特性与其他类型显著不同，具有最高的峰值粘度和稀懈值，最低的低谷粘度、最终粘度、反弹值、峰值时间、糊化温度、起始糊化温度，表明糯小麦淀粉在食品和工业上具有特殊用途；稀懈值与直链淀粉含量呈极显著负相关(r=-0.969)，其他粘度参数与直链淀粉含量呈显著正相关(最终粘度r=0.797，低谷粘度r=0.910、反弹值r=0.954、峰值时间r=0.970、糊化温度r=0.962、起始糊化温度r=0.932)。以上结论可为糯小麦品种选育和淀粉品质改良提供理论依据。 Waxy wheat is very important in food processing industry, starch processing industry and the other industries, so it is a focus of wheat research in many countries these years. Foreign wheat breeders have not conquered the difficulty of high yield combined with waxy character, and there is no waxy wheat variety with high protein and strong gluten in China at present，all of which were caused by lacking proper breeding methods and effective, applied molecular markers-assisted selection technique at a certain extent. Until now, research about the effect of waxy genes mainly depended on nullisomic-tetrasomic lines, recombinant lines or near-isogenic lines, and it is lacking the reports of using improved BC5F2 backcross progenies under the common genetic background. Near-isogenic lines at the Wx loci are important materials for wheat starch quality breeding. However, there are no such lines under the Chinese cultivated wheat genetic background. To develop partial waxy wheats, waxy wheats and near-isogenic lines at the Wx loci under the Chinese cultivated wheat genetic background, we use SDS-PAGE of waxy proteins and effective, applied molecular marker-assisted selection technical system to identify the genotype of waxy wheat’s progenies. The results indicated that such a system is applicable in waxy wheat’s molecular marker-assisted selection effectively. A series of Chinese Spring Wx loci near-isogenic lines were used to identify the specific bands of six STS markers and one CAPS marker of Wx genes. After optimizing PCR amplification and separating of PCR products, three co-dominant and dominant STS-markers were identified at the Wx-A1, Wx-D1 and Wx-B1 loci, respectively, which were used to identify the genotype of waxy wheat’s progenies. Eight Wx genotypes were developed from the improved BC5F2 backcross progenies, which follows Mendelian segregation. Among them, there were two aabbdd waxy plants whose amylose content in the BC5F3 seeds were 1.81% and 0.82%, respectively. In addition, there were partial waxy plants (AAbbdd and aabbDD) whose amylose content in the BC5F3 seeds were 15.24 % and 17.57%, respectively. Most agronomic and quality traits of these four plants resembled those of the recurrent parent “Chuanyu 12”, and superior to waxy wheat parent “98Y1441”. This shows that backcross approach in combination with molecular marker-assisted selection of waxy genes is helpful to develop partial and full waxy wheat with good traits in the waxy wheat breeding program. At the same time, molecular marker-assisted selection technical system in this paper, also establish the base for breeding the near-isogenic lines at the Wx loci under the Chinese cultivated wheat genetic background. According to the results of genotype identification, we use waxy wheat’s improved BC5F2 backcross progenies to verify the effects of null alleles on reducing amylose content and determine the amylose synthesis capacity of each Wx gene independently, and investigate the relativity among amylose content with agonomic traits, quality traits, starch pasting properties respectively. There was significant difference in amylose content of the eight genotypes carrying different null Wx alleles. The reducing effect of the single null alleles was the most significant in Wx-B1b, followed by Wx-D1b and Wx-A1b, and there was no significant difference between Wx-B1b and Wx-D1b. The results of the double null lines further demonstrated that for the capacity of amylose synthesis, Wx-B1a was the highest, followed by Wx-D1a and Wx-A1a, and there was no significant difference between Wx-B1a and Wx-D1a. Amylose contents of the eight genotypes were not significantly correlated with plant height, spike length, spikelets per spike, grains per spike, 1000-grain weight, which showed that starch quality breeding could integrate with high yield breeding. Amylose contents of the eight genotypes were negatively significantly correlated with SDS-sedimentation value(r=-0.726), which suggested that reduction in amylose content is propitious to improve quality at a certain extent. Starch pasting properties of the full waxy type was significantly different from the other seven types, with the highest peak viscosity and breakdown, and lowest valley viscosity, final viscosity, setback, peak time, pasting temperature and starting pasting temperature. It indicated that waxy wheat starch has special use in food and industry. Breakdown was negatively significantly correlated with amylose contents (r=-0.969), and the other parameters were positively significantly correlated with amylose contents (r=0.797 for final viscosity, r=0.910 for trough viscosity, r =0.954 for setback, r =0.970 for peak time, r=0.962 for pasting temperature and r=0.932 for starting pasting temperature ). The results of the study are very useful for waxy wheat variety breeding and starch quality improvement.

簇毛麦（ Dasypyrum villosum）矮秆突变体的研究

株高是农作物的重要农艺性状之一，适度矮化有利于农作物的耐肥、抗倒、高产等。20世纪50年代，以日本的赤小麦为矮源的半矮秆小麦的培育和推广，使得世界粮食产量显著增长，被誉为“绿色革命”。迄今为止，已报到的麦类矮秆、半矮秆基因已达70多个，但由于某些矮源极度矮化或者矮化的同时伴随不利的农艺性状，使得真正运用于育种实践的矮源较少。因此，发掘和鉴定新的控制麦类作物株高的基因，开展株高基因定位、克隆及作用机理等方面的研究，对实现麦类作物株高的定向改良，具有重要的理论意义和应用价值。簇毛麦(Dasypyrum villosum，2n＝14，VV)是禾本科簇毛麦属一年生二倍体异花授粉植物，为栽培小麦的近缘属。本课题组在不同来源的簇毛麦杂交后代中发现了一株自然突变产生的矮秆突变体。观察分析了该突变体的生物学特性，对矮秆性状进行了遗传分析，对茎节细胞长度、花粉的活力进行了细胞学观察，考察了该突变体内源赤霉素含量及不同浓度外施赤霉素对突变体的作用，分析了赤霉素生物合成途径中的内根贝壳杉烯氧化酶（KO）和赤霉素20氧化酶(GA20ox)的转录水平，对赤霉素20氧化酶和赤霉素3-β羟化酶(GA3ox)进行了克隆和序列分析，并对GA20ox进行了原核表达和表达的组织特异性研究。主要研究结果如下：1. 该突变体与对照植株在苗期无差异，在拔节后期才表现出植株矮小，相对对照植株，节间伸长明显受到抑制，叶鞘长度基本不变。在成熟期，对照植株的平均株高为110cm，而突变株的平均株高为32cm，仅为对照植株的1/3 左右。除了株高变矮以外，在成熟后期，突变株还表现一定程度的早衰和雄性不育。I2-KI染色法观察花粉活力结果表明，对照植株花粉90%以上都是有活力的，而突变植株的花粉仅20%左右有活力。2. 突变株与对照植株的杂交F1代均表现正常株高，表明该突变性状为隐性突变。F1代植株相互授粉得到的168株F2代植株中，株高出现分离，正常株高（株高高于80cm）与矮秆植株（株高矮于40cm）的株数比为130：38，经卡方检验，其分离比符合3：1的分离比，因此推测该突变体属于单基因的隐性突变。3. 用ELISA方法检测突变株和对照植株的幼嫩种子中内源性生物活性赤霉素（GA1＋3）含量，结果表明突变株的赤霉素含量为36 ng/ml，而对照植株的赤霉素含量为900 ng/ml。对突变株外施赤霉素，发现矮秆突变株的株高和花粉育性均可得到恢复。这些结果表明该突变株为赤霉素缺陷型突变。4. 用荧光定量PCR方法比较突变株与对照植株中内根贝壳杉烯氧化酶和赤霉素20氧化酶的转录水平，结果表明突变株的KO转录水平比对照植株分别提高了6倍（苗期）和16倍（成熟期），突变株的GA20ox转录水平与对照植株在苗期无明显差异，在成熟期突变株较对照植株则提高了10倍左右。这些结果表明该矮秆突变体与赤霉素的生物合成途径密切相关，而且极有可能在赤霉素的生物合成途径早期就发生了改变。5. 以簇毛麦总基因组为模板，同源克隆了GenBank登录号为EU142950，RT-PCR分离克隆了簇毛麦的GA3ox基因cDNA全长序列，分析结果表明该cDNA全长1206bp，含完整编码区1104bp，推测该序列编码蛋白含368个氨基酸残基，分子量为40.063KD，等电点为6.27。预测的氨基酸序列含有双加氧酶的活性结构，在酶活性中心2个Fe离子结合的氨基酸残基非常保守。该序列与小麦、大麦和水稻的GA3ox基因一致性分别为98%、96%、86%。基因组序列与cDNA序列在外显子部分一致，在478-715bp和879-1019bp处分别含238bp和140bp的内含子。6. 通过RT-PCR技术克隆了簇毛麦的GA20ox基因全长，命名为DvGA20ox，GenBank登录号为EU142949。该基因全长1080个碱基，编码359个氨基酸，具有典型的植物GA20ox基因结构。该基因编码的蛋白质与小麦、大麦、黑麦草等GA20ox蛋白的同源性分别为98%，97% 和91%。该序列重组到原核表达载体pET-32a(+)上，将获得的重组子pET-32a(+)-DvGA20ox转化大肠杆菌BL21pLysS后用IPTG进行诱导表达。SDS-PAGE分析表明，DvGA20ox基因在大肠杆菌中获得了高效表达，融合蛋白分子量为55kDa。定量PCR分析表明，该基因在簇毛麦不同器官中的表达差异明显：叶片中表达水平最高，根部表达水平次之，茎部和穗中表达较弱。在外施赤霉素后，该基因的表达水平在两小时以后急剧下降，表明该基因的表达受自身的反馈调节。本研究结果认为，(1)该簇毛麦矮秆突变体为单基因的隐性突变；(2)该矮秆突变体为赤霉素敏感突变，内源赤霉素含量检测表明突变体的内源性赤霉素含量仅为对照植株的1/30；(3)荧光定量PCR结果表明突变株的赤霉素生物合成途径的关键酶基因表达水平比对照植株高，而且突变植株的赤霉素生物合成改变很可能发生在赤霉素生物合成途径的早期；(4)GA20ox有表达的组织特异性，且受到自身产物的反馈调节。 Plant height is an impotrant agronomic trait of triticeae crops.Semi-dwarf cropcultivars, including those of wheat, maize and rice, have significantly increased grainproduction that has been known as “green revolution”. The new dwarf varieties couldraise the harvest Index at the expense of straw biomass, and, at the sametime, improvelodging resistance and responsiveness to nitrogen fertilizer. Moreover, dwarf traits ofplant are crucial for elucidating mechanisms for plant growth and development aswell. In many plant species, various dwarf mutants have been isolated and theirmodles of inheritance and physiology also have been widely investigated.The causesfor their dwarf phenotypes were found to be associated with plant hormones,especially, gibberellins GAs.Dasypyrum villosum Candargy (syn.Haynaldia villosa) is a cross-pollinating,diploid (2n = 2x = 14) annual species that belongs to the tribe Triticeae. It is native toSouthern Europe and West Asia, especially the Caucasuses, and grows underconditions unfavorable to most cultivated crops. The genome of D. villosum,designated V by Sears, is considered an important donor of genes to wheat for improving powdery mildew resistance, take-all, eyespot, and plant and seed storageprotein content. A spontaneous dwarf mutant was found in D. villosum populations.The biological character and modles of inheritance of this dwarf mutant are studied.The cell length of stem cell is observed. The influence of extraneous gibberellin tothe dwarf mutant is also examined; the transcript level of key enzyme of gibberellinbiosynthesis pathway in mutant and control plants is compared. GA3ox and GA20oxare cloned and its expression pattern is researched.1. The dwarf mutant showed no difference with control plants at seedlingstage.At mature stage, the average height of control plants were 110cm and the dwarfplants were 33cm. The height of the mutant plant was only one third of the normalplants due to the shortened internodes. Cytology observation showed that theelongation of stem epidermal and the parenchyma cells were reduced. The dwarfmutant also shows partly male sterile. Pollen viability test indicates that more than80% of the pollen of the mutant is not viable.2. The inheritance modle of this dwarf mutant is studied. All The F1 plantsshowed normal phenotype indicating that the dwarfism is controlled by recessivealleles. Among the 168 F2 plants, there are 130 normal plants and 30 dwarf plants, thesegregation proportion accord with Mendel’s 3:1 segregation. We therefore proposethat this dwarf phenotype is controlled by a single recessive gene.3. Quantitative analyses of endogenous GA1+3 in the young seeds indicated thatthe content of GA1+3 was 36ng/ml in mutant plants and 900ng/ml in normal plants.The endogenous bioactive GA1+3 in mutant plants are only about 1/30 of that innormal plants. In addition, exogenously supplied GA3 could considerably restore themutant plant to normal phenotype. These results showed that this mutant wasdefective in the GA biosynthesis.4. More than ten enzymes are involved in GA biosynthesis. KO catalyzes thefirst cytochrome P450-mediated step in the gibberellin biosynthetic pathway and themutant of KO lead to a gibberellin-responsive dwarf mutant. GA20ox catalyze therate-limited steps so that their transcript level will influence the endogenous GAbiosynthesis and modifies plant architecture. The relative expression levels of genesencoding KO and GA20ox were quantified by real time PCR to assess whether thechanges in GA content correlated with the expression of GA metabolism genes andwhere the mutant occurred during the GA biosynthesis pathway. In mutant plants,the transcript levels of KO increased about 6-fold and 16-fold at the seedling stage and elongating stage respectively comparing with the normal plants. For theseedlings, there was no notable difference in the expression of GA20ox betweenmutant and normal plants. At the elongating stage, GA20ox transcript increased 10times in mutant plants, suggesting that the GA biosynthesis pathway in mutant plantshad changed from the early steps rather than the late steps.5. A full length cDNA of D. villosum gibberellin 3β-hydroxylase homology(designated as DvGA3ox) was isolated and consisted of 1206bp containing an openreading frame of 1104bp encoding 368 predicted amino acid residues. Identityanalysis showed that the gibberellin 3β-hydroxylase nucleotide sequence shared 98%,96% and 86% homology with that of wheat, barley and rice. The predicted peptidecontained the active-site Fe of known gibberellin 3β-hydroxylase and the regionhomologous to wheat, barley and Arabidopsis. The genomic clone of gibberellin3β-hydroxylase has two introns.6. The full-length cDNA of D. villosum gibberellin 20 oxidase (designated asDvGA20ox) was isolated and consisted of 1080-bp and encoded 359 amino acidresidues with a calculated mol wt of 42.46 KD. Comparative and bio-informaticsanalyses revealed that DvGA20ox had close similarity with GA20ox from otherspecies and contained a conserved LPWKET and NYYPXCQKP regions. Tissueexpression pattern analysis revealed DvGA20ox expressed in all the tissues that wereexamined and the highest expression of DvGA20ox in expanding leaves followed byroots. Heterologous expression of this cDNA clone in Escherichia coli gave a fusionprotein that about 55KD. Transcript levels of DvGA20ox dramatically reduced twohours after application of biologically active GA3, suggesting that the biosynthesis ofthis enzymes might be under feedback control.

Vortices in (Abelian) Chern-Simons gauge theory

The vortex solutions of various classical planar field theories with (Abelian) Chern-Simons term are reviewed. Relativistic vortices, put forward by Paul and Khare, arise when the Abelian Higgs model is augmented with the Chern-Simons term. Adding a suitable sixth-order potential and turning off the Maxwell term provides us with pure Chern-Simons theory, with both topological and non-topological self-dual vortices, as found by Hong-Kim-Pac, and by Jackiw-Lee-Weinberg. The non-relativistic limit of the latter leads to non-topological Jackiw-Pi vortices with a pure fourth-order potential. Explicit solutions are found by solving the Liouville equation. The scalar matter field can be replaced by spinors, leading to fermionic vortices. Alternatively, topological vortices in external field are constructed in the phenomenological model proposed by Zhang-Hansson-Kivelson. Non-relativistic Maxwell-Chern-Simons vortices are also studied. The Schrodinger symmetry of Jackiw-Pi vortices, as well as the construction of some time-dependent vortices, can be explained by the conformal properties of non-relativistic space-time, derived in a Kaluza-Klein-type framework. (c) 2009 Elsevier B.V. All rights reserved.

Energy-Momentum of a Cosmological Brane Model and the Gauge Hierarchy

We analyze in this paper the general covariant energy-momentum tensor of the gravitational system in general five-dimensional cosmological brane-world models. Then through calculating this energy-momentum for the cosmological generalization of the Randall-Sundrum model, which includes the original RS model as the static limit, we are able to show that the weakness of the gravitation on the "visible" brane is a general feature of this model. This is the origin of the gauge hierarchy from a gravitational point of view. Our results are also consistent with the fact that a gravitational system has vanishing total energy.

Energy and entropy radiated by a black hole embedded in a de Sitter braneworld

We study the Hawking radiation of a (4+n)-dimensional Schwarzschild black hole imbedded in space-time with a positive cosmological constant. The greybody and energy emission rates of scalars, fermions, bosons, and gravitons are calculated in the full range of energy. Valuable information on the dimensions and curvature of space-time is revealed. Furthermore, we investigate the entropy radiated and lost by black holes. We find their ratio near 1 in favor of the Bekenstein's conjecture.

Dynamical horizon entropy and equilibrium thermodynamics of generalized gravity theories

We study the relation between the thermodynamics and field equations of generalized gravity theories on the dynamical trapping horizon with sphere symmetry. We assume the entropy of a dynamical horizon as the Noether charge associated with the Kodama vector and point out that it satisfies the second law when a Gibbs equation holds. We generalize two kinds of Gibbs equations to Gauss-Bonnet gravity on any trapping horizon. Based on the quasilocal gravitational energy found recently for f(R) gravity and scalar-tensor gravity in some special cases, we also build up the Gibbs equations, where the nonequilibrium entropy production, which is usually invoked to balance the energy conservation, is just absorbed into the modified Wald entropy in the Friedmann-Robertson-Walker spacetime with slowly varying horizon. Moreover, the equilibrium thermodynamic identity remains valid for f(R) gravity in a static spacetime. Our work provides an alternative treatment to reinterpret the nonequilibrium correction and supports the idea that the horizon thermodynamics is universal for generalized gravity theories.

Study of morphology and phase diagram of the H-shaped (AC)B(CA) ternary block copolymers using self-consistent field theory

By using a combinatorial screening method based on the self-consistent field theory (SCFT) for polymer systems, the micro-phase morphologies of the H-shaped (AC)B(CA) ternary block copolymer system are studied in three-dimensional (3D) space. By systematically varying the volume fractions of the components A, B, and C, six triangle phase diagrams of this H-shaped (AC)B(CA) ternary block copolymer system with equal interaction energies among the three components are constructed from the weaker segregation regime to the strong segregation regime, In this study, thirteen 3D micro-phase morphologies for this H-shaped ternary block copolymer system are identified to be stable and seven 3D microphase morphologies are found to be metastable.

Multiform oxide optical materials via the versatile Pechini-type sol-gel process: Synthesis and characteristics

This feature article highlights work from the authors' laboratories on the various kinds of oxide optical materials, mainly luminescence and pigment materials with different forms (powder, core-shell structures, thin film and patterning) prepared by the Pechini-type sol-gel (PSG) process. The PSG process, which uses the common metal salts (nitrates, acetates, chlorides, etc.) as precursors and citric acid (CA) as chelating ligands of metal ions and polyhydroxy alcohol (such as ethylene glycol or poly ethylene glycol) as a cross-linking agent to form a polymeric resin on molecular level, reduces segregation of particular metal ions and ensures compositional homogeneity. This process can overcome most of the difficulties and disadvantages that frequently occur in the alkoxides based sol-gel process.

The influence of hard-segments on two-phase structure and shape memory properties of PCL-based segmented polyurethanes

Poly(epsilon-caprolactone)-based segmented polyurethanes (PCLUs) were prepared from poly(epsilon-caprolactone) diol, diisocyanates (DI), and 1,4-butanediol. The DIs used were 4,4'-diphenylmethane diisocyanate (MDI), 2,4-toluenediisocyanate (TDI), iso-phorone diisocyanate (IPDI), and hexamethylene diisocyanate (HDI). Differential scanning calorimetry, small-angle X-ray scattering, and dynamic mechanical analysis were employed to characterize the two-phase structures of all PCLUs. It was found that HDI- and MDI-based PCLUs had higher degree of microphase separation than did IPDI- and TDI-based PCLUs, which was primarily due to the crystallization of HDI- and MDI-based hard-segments. As a result, the HDI-based PCLU exhibited the highest recovery force up to 6 MPa and slowest stress relaxation with increasing temperature. Besides, it was found that the partial damage in hard-segment domains during the sample deformation was responsible for the incomplete shape-recovery of PCLUs after the first deformation, but the damage did not develop during the subsequent deformation.

Competition of lamellar orientation in thin films of a symmetric poly(styrene)-b-poly(L-lactide)diblock copolymer in melt state

We have studied the lamellar orientation in thin films of a model diblock copolymer, symmetric poly(styrene)-b-poly(L-lactide) (PS-PLLA), in the melt state on supported silicon wafer surface. In this system, while the PLLA block prefers to wet the polymer/substrate interface, the polymer/air as well as polymer/polymer interface is neutral for both blocks due to the similar surface energies of PS and PLLA in melt state. Our results demonstrate that the interplay of the interfaces during phase separation results in a series of structures before approaching the equilibrium state. Lamellar orientation of thin films with different initial film thicknesses at different annealing stages has been investigated using atomic force microscopy (AFM), transmission electronic microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). It is found that in the early stage (annealing time t < 10 min), the polymer/substrate interface dominates the structure evolution, leading to a parallel lamellar structure with holes or islands formed depending on the initial film thickness. Later on, the neutral air interface becomes important and leads to a transition of lamellar orientation from parallel to perpendicular. It is interesting to see that for films with thickness h > 2L, where L is the bulk lamellar period, the lamellar orientation transition can occur independently in different parallel lamellar domains due to the neutrality of polymer/polymer interface.

Structural and magnetic properties of Sr2Fe1−xGaxMoO6 (0≤x≤0.25)

We have investigated the structure, magnetization and magnetoresistance (MR) of the double perovskite compounds Sr2Fe1−xGaxMoO6 (0≤x≤0.25). Rietveld refinement results show that the anti-site defects (ASDs) concentration increases with x, giving rise to highly disordered samples at the B/B positions, for the highest doping levels. The evolution of bond lengths and ions oxidation states could be understood by the distribution of trivalent Ga ions at the B/B positions, which leads to the formation of more disorder structure. The saturation magnetization and Curie temperature decreased with the Ga content increases in the samples, and their origin was found that the cations disorder for the Ga-doped compounds is annihilating double exchange mechanism due to the presence of significant amounts of Fe and Ga cations on the B site. The low-field magnetoresistance of Sr2FeMoO6 (SFMO) can be greatly enhanced by replacing the Fe by the nonmagnetic Ga ion up to a temperature of 300 K,since Ga ions may act as a barrier for electron transport along the chain in the ferromagnetic segregation and weaken the ferromagnetic exchange.

Phase separation of PS/PVME blend films induced by capillary force

The phase behavior of a miscible PS/PVME (80/20, w/w) blend film in a confined geometry has been investigated at the annealing temperature much lower than the low critical solution temperature (LCST) of the blend. When the annealing temperature (52degreesC) is near the glass transition temperature of the blend (51.2degreesC), PVME-rich phase at the air-film surface under a microchannel forms smaller protrusion. When the annealing temperature is increased to 70degreesC, the protruding stripes, which are almost developed, are mainly composed of the mobile PVME-rich phase. These results reveal that the capillary force lead to the enrichment of PVME-rich phase at the air-polymer interface of a PDMS microchannel, that is, the capillary force lithography (CFL) can induce the phase separation of PS/PVME blend films.

Patterned self-adaptive polymer brushes by "grafting to" approach and microcontact printing

Patterned self-adaptive PS/P2VP mixed polymer brushes were prepared by "grafting to" approach combining with microcontact printing (muCP). The properties of the patterned surface were investigated by lateral force microscopy (LFM), XPS and water condensation figures. In the domains with grafted P2VP, the PS/P2VP mixed brushes demonstrated reversible switching behavior upon exposure to selective solvents for different components. The chemical composition of the top layer as well as the surface wettability can be well tuned due to the perpendicular phase segregation in the mixed brushes. While in the domains without grafted P2VP, the grafted PS did not have the capability of switching. The development and erasing of the pattern is reversible under different solvent treatment.

Annealing effects on the surface morphologies of thin PS/PMMA blend films with different film thickness

The surface morphology evolution of three thin polystyrene (PS)/polymethyl methacrylate (PMMA) blend films (<70 nm) on SiOx substrates upon annealing were investigated by atomic force microscopy (AFM) and some interesting phenomena were observed. All the spin-coated PS/PMMA blend films were not in thermodynamic equilibrium. For the 67.1 and the 27.2 nm PS/PMMA blend films, owing to the low mobility of the PMMA-rich phase layer at substrate surfaces and interfacial stabilization caused by long-range van der Waals forces of the substrates, the long-lived metastable surface morphologies (the foam-like and the bicontinuous morphologies) were first observed. For the two-dimensional ultrathin PS/PMMA blend film (16.3 nm), the discrete domains of the PS-rich phases upon the PMMA-rich phase layer formed and the secondary phase separation occurred after a longer annealing time.

Surface and interface morphology of polystyrene/poly(methyl methacrylate) thin-film blends and bilayers

The surface and interface morphologies of polystyrene (PS)/poly(methyl methacrylate) (PMMA) thin-film blends and bilayers were investigated by means of atomic force microscopy (AFM) and X-ray photoelectron spectroscopy. Spin-coating a drop of a PS solution directly onto a PMMA bottom layer from a common solvent for both polymers yielded lateral domains that exhibited a well-defined topographical structure. Two common solvents were used in this study. The structure of the films changed progressively as the concentration of the PS solution was varied. The formation of the blend morphology could be explained by the difference in the solubility of the two polymers in the solvent and the dewetting of PS-rich domains from the PMMA-rich phase. Films of the PS/PMMA blend and bilayer were annealed at temperatures above their glass-transition temperatures for up to 70 h. All samples investigated with AFM were covered with PS droplets of various size distributions. Moreover, we investigated the evolution of the annealed PS/PMMA thin-film blend and bilayer and gave a proper explanation for the formation of a relatively complicated interface inside a larger PS droplet.