889 resultados para Grain-handling machinery


Relevância:

20.00% 20.00%

Publicador:

Resumo:

A method has been developed to obtain quantitative information about grain size and shape from fractured surfaces of ceramic materials. One elaborated a routine to split intergranular and transgranular grains facets of ceramic fracture surfaces by digital image processing. A commercial ceramic (ALCOA A-16, Al2O3-1.5% of CrO) was used to test the proposed method. Microstructural measurements of grain shape and size taken from fracture surfaces have been compared through descriptive statistics of distributions, with the corresponding measurements from polished and etched surfaces. The agreement between results, with the expected bias on grain size values from fractures, obtained for both types of surfaces allowed to infer that this new technique can be used to extract the relevant microstructural information from fractured surfaces, thus minimising the time consuming steps of sample preparation. (C) 2003 Elsevier Ltd. All rights reserved.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The present work studied the influence of thermal treatment in oxygen rich atmosphere on heterogenous junctions in Mn-doped SnO2 polycrystalline system presenting varistor behavior. The samples were prepared by conventional oxide mixture methodology, and were submitted to heat treatment in oxygen rich atmosphere at 900 degrees C for 2h. The samples were characterized by X-ray diffraction, scanning electron microscopy, dc and ac electrical measurements. The results showed that there is an evident relationship between the microstructure heterogeneity and non-ohmic electrical properties. It was found that for this SnO2 center dot MnO-based varistor system the heat treatment in oxygen rich atmosphere does not necessarily increase the varistors properties, which was related to the decrease in the grain boundary resistance. The results are compared with Co-doped SnO2 varistors and ZnO based varistors. (C) 2008 WILEY-VCH Verlay GmbH & Co. KGaA, Weinheim.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The effects of grain-based diets from C3 or C4-cycle plants on muscle delta C-13 change process in Nile tilapia (Oreochromis niloticus) fingerlings were investigated. Two groups of sex reversal males Nile tilapia fingerlings were fed with isoproteic (32.0% DP) and isocaloric (3200 kcal DE/kg) diets, differing from each other by their delta C-13. Muscle samples were collected and the carbon isotopic composition was measured. For C4 diet, the formula for the muscle delta C-13 change related to the intake time of a new diet was delta C-13=- 14.88 - 9.2 1 e(-0.0209t) and the half-life (T) of the muscle carbon was 33.2 days. For C3 diet, the formula was delta C-13 = - 25.43 + 8.59e(-0.0533), with T = 13 days. The C3 diet was considered more appropriate based on its palatability and consequent larger food intake than the C4 diet, resulting in an increased muscle delta C-13 change rate. However, for future studies, would be necessary to mix both the C3 and C4 feedstuffs to formulate diets nutritionally appropriated, with contrasting stable isotopes signatures. Tissue delta C-13 change rate is therefore indicated as a promising tool to better understand the biotic and abiotic factors that influence nutrients utilization from the diet and animal growth. (c) 2006 Elsevier B.V. All rights reserved.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This study aimed at evaluating the effect of total replacement of dry corn by wet grain corn silage (WGCS) in the feed of label broilers older than 28 days of age on performance, mortality, carcass, parts, breast meat and thighs meat yields, and meat quality. A mixed-sex flock of 448 ISA S 757-N (naked-neck ISA JA Label) day-old chicks was randomly distributed in to randomized block experimental design with four treatments (T1 - with no WGCS; T2 - WGCS between 28 and 83 days; T3 - WGCS between 42 and 83 days; and T4 - WGCS between 63 and 83 days) and four replicates of 28 birds each. Birds were raised under the same management and feeding conditions until 28 days of age, when they started to have free access to paddock with pasture (at least 3m²/bird) and to be fed the experimental diets. Feed and water were offered ad libitum throughout the rearing period, which was divided in three stages: starter (1 to 28 days), grower (29 to 63 days), and finisher (64 to 83 days) according to the feeding schedule. During the short periods of WGCS use (group T2 during grower stage and T4 during the finisher stage), performance and mortality results were similar as to those of the control group (T1). At the end of the experiment, it was observed that the extended use of WGCS (T2 and T3) determined a negative effect on feed conversion ratio. However, the best results of breast meat yield were observed with birds fed WGCS since 28 days (T2). It was concluded that WGCS can replace dry corn grain for short periods during the grower and finisher stages with no impairment of meat quality and yield in slow growth broilers.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Matricaria chainomilla CH12 is a phytotherapeutic or homeopathic product, which has been used to reduce stress. Here, we examined its effect on preventing handling stress in bovines. Sixty Nelore calves were randomly distributed into two equal groups. One group was administered Matricaria chainomilla CH, in diet and the other the 'control' was not. Animals in both groups were maintained unstressed for 30 days to adjust to the feeding system and pasture, and were then stressed by constraint on the 31th, 38th, 45th and 60th experimental days. Blood samples were taken on these days after animals had been immobilization in a trunk contention for 5 min. Stress was followed by analyzing serum cortisol levels. These peaked on the 45th day and then decreased, but not to baseline, on the 60th day. on the 45th day cortisol levels were significantly lower in animals fed Matricaria chantomilla CH12, suggesting that this product reduces stress. These effects may be a consequence of its inhibiting cortisol production and its calming and anxiolytic effects.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This study determined the correlation between serum cortisol levels and rabies antibody titers in cattle primo-vaccinated against rabies and supplemented with dietary selenium (Se). Sixty Nelore male calves (10 to 12 months old) received daily and individual dietary supplementation with 0, 3.6, 5.4 and 6.4 mg Se (groups Gc, G(3.6), G(5.4) and G(6.4), respectively). The animals were vaccinated against rabies (day 0) and subjected to handling stress in the corral for 120 days. Blood sampling procedures were performed on days 0, 15, 30, 60, 90 and 120. Cortisol levels increased until day 90, but had dropped significantly by day 120 (P < 0.01). Rabies antibody titers on days 30 and 90 were similar among Se-supplemented groups; in the control group, rabies antibodies decreased significantly from day 30 to 60, and 90 to 120. Serum cortisol levels and antibody titers were not correlated in most of the groups or blood sampling days. A positive correlation among these variables was found only in G(6.4) on days 60 (R = 0.513; P = 0.05) and 120 (R = 0.644; P = 0.009). In conclusion, repeated handling in the corral stresses cattle, but without compromising rabies humoral immune response.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

We investigated whether juveniles of the nocturnal fish jundia (Rhamdia quelen) and the diurnal fish Nile tilapia (Oreochromis niloticus) are able to chemically communicate stress to conspecifics. Groups of 8 fish were reared in tanks under recirculated water (water exchanged among all the tanks) for each species. Fish were handled in half of the tanks (stressor fish) and whole-body cortisol concentrations were compared among handled fish, non-handled fish exposed to water from the handled fish, and non-handled control fish held with no water communication. For each treatment cortisol concentrations were determined before exposure to the stressor (basal levels) and after 1, 2, 4, 8, and 24 h. Basal levels of cortisol confirmed fish were unstressed in the beginning of the experiment. Cortisol was increased in the stressor fish 1 h after handling. Fish receiving water from the stressor fish increased cortisol levels later (2 h after the stressor fish were handled). As the isolated control group maintained cortisol levels unchanged throughout the experiment, we concluded that some chemical factor was released by the stressed fish in the water and thus stressed the conspecifics. This pattern was similar for both unrelated species, thus suggesting that this communication might have evolved earlier in fish and reinforcing the biological value of this kind of information. Published by Elsevier B.V.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Usually, the kinetic models used in the study of sintered ceramic are performed by means of indirect physical tests, such as, results obtained from data of linear shrinkage and mass loss. This fact is justified by the difficulty in the determinations of intrinsic parameters of ceramic materials along every sintering process. In this way, the technique of atomic force microscopy (AFM) was used in order to determine the importance and the evolution of the dihedral angle in the sintering of 0.5 mol% MnO2-doped tin dioxide obtained by the polymeric precursor method.