Transregional linkages in the North-Eastern Atlantic - An ‘end-to-end ’ analysis of pelagic ecosystems

This review examines interregional linkages and gives an overview perspective on marine ecosystem functioning in the north-eastern Atlantic. It is based on three of the 'systems' considered by the European Network of Excellence for Ocean Ecosystems Analysis (EUR-OC EANS was established in 2004 under the European Framework VI funding programme to promote integration of marine ecological research within Europe), the Arctic and Nordic Seas, North Atlantic shelf seas and North Atlantic. The three systems share common open boundaries and the transport of water, heat, nutrients and particulates across these boundaries modifies local processes. Consistent with the EUR-OC EANS concept of 'end-to-end' analyses of marine food webs, the review takes an integrated approach linking ocean physics, lower trophic levels and working up the food web to top predators such as marine mammals. We begin with an overview of the regions focusing on the major physical patterns and their implications for the microbial community, phytoplankton, zooplankton, fish and top predators. Human-induced links between the regional systems are then considered and finally possible changes in the regional linkages over the next century are discussed. Because of the scale of potential impacts of climate change, this issue is considered in a separate section. The review demonstrates that the functioning of the ecosystems in each of the regions cannot be considered in isolation and the role of the atmosphere and ocean currents in linking the North Atlantic Ocean, North Atlantic shelf seas and the Arctic and Nordic Seas must be taken into account. Studying the North Atlantic and associated shelf seas as an integrated 'basin-scale' system will be a key challenge for the early twenty-first century. This requires a multinational approach that should lead to improved ecosystem-based approaches to conservation of natural resources, the maintenance of biodiversity, and a better understanding of the key role of the north-eastern Atlantic in the global carbon cycle.

La valoración que los graduados tienen sobre su formación universitaria desde su situación laboral actual

En este artículo analizamos la valoración de los titulados universitarios sobre la formación recibida y su utilidad en la ocupación actual. El objetivo es analizar si existen diferencias por el nivel formativo de origen y el sexo de los estudiantes. A su vez, examinamos si las características de la situación laboral intervienen en estas relaciones afectando diferencialmente según las características sociodemográficas. Los resultados muestran la existencia de diferencias valorativas entre los jóvenes según su origen social y sexo, siendo las mujeres y los jóvenes de clase trabajadora los que valoran mejor su formación recibida. Finalmente, con la introducción de la situación laboral como variable de control constatamos que, en algunos casos, estas diferencias valorativas son debidas al contexto laboral actual de los graduados más que a diferencias sociodemográficas.

Relaxation processes in room temperature ionic liquids: The case of 1-butyl-3-methyl imidazolium hexafluorophosphate

A detailed investigation on the nature of the relaxation processes occurring in a typical room temperature ionic liquid (RTIL), namely, 1-butyl-3-methyl imidazolium hexafluorophosphate ([bmim][PF6]), is reported. The study was conducted using both elastic and inelastic neutron scattering over a wide temperature range from 10 to 400 K, accessing the dynamic features of both the liquid and glassy amorphous states. In this study, the inelastic fixed energy scan technique has been applied for the first time to this class of materials. Using this technique, the existence of two relaxation processes below the glass transition and a further diffusive process occurring above the glass-liquid transition are observed. The low temperature processes are associated with methyl group rotation and butyl chain relaxation in the glassy state and have been modeled in terms of two Debye-like, Arrhenius activated processes. The high temperature process has been modeled in terms of a Kohlraush-Williams-Watts relaxation, with a distinct Vogel-Fulcher-Tamman temperature dependence. These results provide novel information that will be useful in rationalizing the observed structural and dynamical behavior of RTILs in the amorphous state.

Can Civil Society Succeed Where Elites Have Failed in the War on Sectarianism? Towards an infinitely demanding politics for the North

Caught between the well-armed imaginations of paramilitary organisations competing for the hearts and minds of a divided population, and state engineering of a liberal peace, civil society's impact on Northern Ireland's identity politics was limited during the thirty-year conflict. Specifically, the community and voluntary sector itself has tended to replicate as much as it challenged patterns of segregation in many of its own structures. With plans set out in the Northern Ireland Executive's Programme for Government (2008-11) to engage civil society in opening a new era of ‘good relations’ work to counter sectarianism and racism, civil society organisations will face a complex terrain, facing scepticism about their contribution to peace-making before the Good Friday Agreement, and working in a post-Agreement environment marked by continuing elite and communal antagonism demonstrated by the crisis at the turn of 2009 over devolution of justice and policing powers to the Northern Ireland Executive. A significant aspect of the resolution was a belated agreement by Sinn Fein and the DUP on a new community relation strategy, Cohesion, Sharing and Integration. This article suggests that civil society has a significant role to play in encouraging communities to confront the contradictions and tensions that continue to haunt the political architects of the Good Friday Agreement by affirming a radical and contingent vision of democracy as democratisation at a distance from the identity-saturated politics of the state-region of Northern Ireland. It draws on the work of Simon Critchley, Emmanuel Levinas and Wendy Brown, to offer an approach to identity politics in post-conflict Northern Ireland, focusing on the future orientation of civil society.

A novel method of embedding distributed optical fiber sensor for structural health monitoring

A distributed optical fiber sensor based on Brillouin scattering (BOTDR or BOTDA) can measure and monitor strain and temperature generated along optical fiber. Because it can measure in real-time with high precision and stability, it is quite suitable for health monitoring of large-scale civil infrastructures. However, the main challenge of applying it to structural health monitoring is to ensure it is robust and can be repaired by adopting a suitable embedding method. In this paper, a novel method based on air-blowing and vacuum grouting techniques for embedding long-distance optical fiber sensors was developed. This method had no interference with normal concrete construction during its installation, and it could easily replace the long-distance embedded optical fiber sensor (LEOFS). Two stages of static loading tests were applied to investigate the performance of the LEOFS. The precision and the repeatability of the LEOFS were studied through an overloading test. The durability and the stability of the LEOFS were confirmed by a corrosion test. The strains of the LEOFS were used to evaluate the reinforcing effect of carbon fiber reinforced polymer and thereby the health state of the beams.

Development of XUV lasers at the RAL central laser facility

Recent progress in the development of XUV lasers by research teams using high-power and ultrashort-pulse Nd:glass and KrF laser facilities at the Rutherford Appleton Laboratory is reviewed. Injector-amplifier operation and prepulse enhanced output of the Ge XXIII collisional laser driven by a kilojoule glass laser, enhanced gain in CVI recombination with picosecond CPA drive pulses from a glass laser, and optical field ionization and XUV harmonic generation with a KrF CPA laser are described.

Numbered-up gas-liquid micro/milli channels reactor with modular flow distributor

Gas-liquid processing in microreactors remains mostly restricted to the laboratory scale due to the complexity and expenditure needed for an adequate numbering-up with a uniform flow distribution. Here, the numbering-up is presented for multi-phase (gas-liquid) flow in microreactor suitable for a production capacity of kg/h. Based on the barrier channels concept, the barrier-based micro/milli reactor (BMMR) is designed and fabricated to deliver flow non-uniformity of less than 10%. The BMMR consists of eight parallel channels all operated in the Taylor flow regime and with a liquid flow rate up to 150. mL/min. The quality of the flow distribution is reported by studying two aspects. The first aspect is the influence of different viscosities, surface tensions and flow rates. The second aspect is the influence of modularity by testing three different reaction channels type: (1) square channels fabricated in a stainless steel plate, (2) square channels fabricated in a glass plate, and (3) circular channels (capillaries) made of stainless steel. Additionally, the BMMR is compared to that of a single channel regard the slug and bubble lengths and bubble generation frequency. The results pave the ground for bringing multi-phase flow in microreactor one step closer for large scale production via numbering-up. © 2012 Elsevier B.V.

Late Quaternary tephrostratigraphy, Ahklun Mountains, SW Alaska

Radiocarbon-dated sediment cores from six lakes in the Ahklun Mountains, south-western Alaska, were used to interpolate the ages of late Quaternary tephra beds ranging in age from 25.4 to 0.4ka. The lakes are located downwind of the Aleutian Arc and Alaska Peninsula volcanoes in the northern Bristol Bay area between 159° and 161°W at around 60°N. Sedimentation-rate age models for each lake were based on a published spline-fit procedure that uses Monte Carlo simulation to determine age model uncertainty. In all, 62 C ages were used to construct the six age models, including 23 ages presented here for the first time. The age model from Lone Spruce Pond is based on 18 ages, and is currently the best-resolved Holocene age model available from the region, with an average 2s age uncertainty of about±109 years over the past 14.5ka. The sedimentary sequence from Lone Spruce Pond contains seven tephra beds, more than previously found in any other lake in the area. Of the 26 radiocarbon-dated tephra beds at the six lakes and from a soil pit, seven are correlated between two or more sites based on their ages. The major-element geochemistry of glass shards from most of these tephra beds supports the age-based correlations. The remaining tephra beds appear to be present at only one site based on their unique geochemistry or age. The 5.8ka tephra is similar to the widespread Aniakchak tephra [3.7±0.2 (1s) ka], but can be distinguished conclusively based on its trace-element geochemistry. The 3.1 and 0.4ka tephras have glass major- and trace-element geochemical compositions indistinguishable from prominent Aniakchak tephra, and might represent redeposited beds. Only two tephra beds are found in all lakes: the Aniakchak tephra (3.7±0.2ka) and Tephra B (6.1±0.3ka). The tephra beds can be used as chronostratigraphic markers for other sedimentary sequences in the region, including cores from Cascade and Sunday lakes, which were previously undated and were analyzed in this study to correlate with the new regional tephrostratigraphy. © 2012 John Wiley & Sons, Ltd.

Application of fibre assemblies as damping elements in the automotive industry

This investigation aims to characterise the damping properties of the nonwoven materials with potential applications in automotive and aerospace industry. Nonwovens are a popular choice for many applications due to their relatively low manufacturing cost and unique properties. It is known that nonwovens are efficient energy dispersers for certain applications such as acoustic damping and ballistic impact. It is anticipated that these energy absorption properties could eventually be used to provide damping for mechanical vibrations. However the behaviour of nonwovens under dynamic load and vibration has not been investigated before. Therefore we intend to highlight these aspects of the behaviour of the nonwovens through this research. In order to obtain an insight to the energy absorption properties of the nonwoven fabrics, a range of tests has been performed. Forced vibration of the cantilever beam is used to explore damping over a range of resonance modes and input amplitudes. The tests are conducted on aramid, glass fibre and polyester fabrics with a range of area densities and various coatings. The tests clarified the general dynamic behaviour of the fabrics tested and the possible response in more real application condition as well. The energy absorption in both thickness and plane of the fabric is tested. The effects of the area density on the results are identified. The main absorption mechanism is known to be the friction. The frictional properties are improved by using a smaller fibre denier and increasing fibre length, this is a result of increasing contact surface between fibres. It is expected the increased friction result in improving damping. The results indicate different mechanism of damping for fiber glass fabrics compared to the aramid fabrics. The frequency of maximum efficiency of damping is identified for the fabrics tested. These can be used to recommend potential applications.

Nurses' experiences providing palliative care to individuals living in rural communities aspects of the physical residential setting

Introduction: Efforts are needed to improve palliative care in rural communities, given the unique characteristics and inherent challenges with respect to working within the physical aspects of residential settings. Nurses who work in rural communities play a key role in the delivery of palliative care services. Hence, the purpose of this study was to explore nurses’ experiences of providing palliative care in rural communities, with a particular focus on the impact of the physical residential setting.

Methods: This study was grounded in a qualitative approach utilizing an exploratory descriptive design. Individual telephone interviews were conducted with 21 community nurses. Data were analyzed by thematic content analysis.

Results: Nurses described the characteristics of working in a rural community and how it influences their perception of their role, highlighting the strong sense of community that exists but how system changes over the past decade have changed the way they provide care. They also described the key role that they play, which was often termed a ‘jack of all trades’, but focused on providing emotional, physical, and spiritual care while trying to manage many challenges related to transitioning and working with other healthcare providers. Finally, nurses described how the challenges of working within the physical constraints of a rural residential setting impeded their care provision to clients who are dying in the community, specifically related to the long distances that they travel while dealing with bad weather.

Mathematical anxiety is linked to reduced cognitive reflection: A potential road from discomfort in the mathematics classroom to susceptibility to biases

Background
When asked to solve mathematical problems, some people experience anxiety and threat, which can lead to impaired mathematical performance (Curr Dir Psychol Sci 11:181–185, 2002). The present studies investigated the link between mathematical anxiety and performance on the cognitive reflection test (CRT; J Econ Perspect 19:25–42, 2005). The CRT is a measure of a person’s ability to resist intuitive response tendencies, and it correlates strongly with important real-life outcomes, such as time preferences, risk-taking, and rational thinking.

Methods
In Experiments 1 and 2 the relationships between maths anxiety, mathematical knowledge/mathematical achievement, test anxiety and cognitive reflection were analysed using mediation analyses. Experiment 3 included a manipulation of working memory load. The effects of anxiety and working memory load were analysed using ANOVAs.

Results
Our experiments with university students (Experiments 1 and 3) and secondary school students (Experiment 2) demonstrated that mathematical anxiety was a significant predictor of cognitive reflection, even after controlling for the effects of general mathematical knowledge (in Experiment 1), school mathematical achievement (in Experiment 2) and test anxiety (in Experiments 1–3). Furthermore, Experiment 3 showed that mathematical anxiety and burdening working memory resources with a secondary task had similar effects on cognitive reflection.

Conclusions
Given earlier findings that showed a close link between cognitive reflection, unbiased decisions and rationality, our results suggest that mathematical anxiety might be negatively related to individuals’ ability to make advantageous choices and good decisions.

Development of a Short Stay Unit in an Emergency Department

In 2009, the Royal Victoria Hospital, Belfast, established a nine-bed, short-stay unit in its emergency department. This article explains the rationale for the model of care delivery adopted, and the importance of developing and working with integrated care pathways. It also discusses four areas essential to the effective running of the unit: interdisciplinary collaboration, training for clinical nurse leaders, management of change and leadership.

Regional integration of biogas – developing an intersectoral research action plan for Northern Ireland

Bioenergy is a key component of the European Union long term energy strategy across all sectors, with a target contribution of up to 14% of the energy mix by 2020. It is estimated that there is the potential for 1TWh of primary energy from biogas per million persons in Europe, derived from agricultural by-products and waste. With an agricultural sector that accounts for 75% of land area and a large number of advanced engineering firms, Northern Ireland is a region with considerable potential for an integrated biogas industry. Northern Ireland is also heavily reliant on imported fossil fuels. Despite this, the industry is underdeveloped and there is a need for a collaborative approach from research, business and policy-makers across all sectors to optimise Northern Ireland’s abundant natural resources. ‘Developing Opportunities in Bio-Energy’ (i.e. Do Bioenergy) is a recently completed project that involved both academic and specialist industrial partners. The aim was to develop a biogas research action plan for 2020 to define priorities for intersectoral regional development, co-operation and knowledge transfer in the field of production and use of biogas. Consultations were held with regional stakeholders and working groups were established to compile supporting data, decide key objectives and implementation activities. Within the context of this study it was found that biogas from feedstocks including grass, agricultural slurry, household and industrial waste have the potential to contribute from 2.5% to 11% of Northern Ireland’s total energy consumption. The economics of on-farm production were assessed, along with potential markets and alternative uses for biogas in sectors such as transport, heat and electricity. Arising from this baseline data, a Do Bioenergy was developed. The plan sets out a strategic research agenda, and details priorities and targets for 2020. The challenge for Northern Ireland is how best to utilise the biogas – as electricity, heat or vehicle fuel and in what proportions. The research areas identified were: development of small scale solutions for biogas production and use; solutions for improved nutrient management; knowledge supporting and developing the integration of biogas into the rural economy; and future crops and bio-based products. The human resources and costs for the implementation were estimated as 80 person-years and £25 million respectively. It is also clear that the development of a robust bio-gas sector requires some reform of the regulatory regime, including a planning policy framework and a need to address social acceptance issues. The Action Plan was developed from a regional perspective but the results may be applicable to other regions in Europe and elsewhere. This paper presents the methodology, results and analysis, and discussion and key findings of the Do Bioenergy report for Northern Ireland.

Thermodynamically stable amorphous drug dispersions in amorphous hydrophilic polymers engineered by hot melt extrusion.

In this study thermodynamically stable dispersions of amorphous quinine, a model BCS class 2 therapeutic agent, within an amorphous polymeric platform (HPC), termed a solid-in-solid dispersion, were produced using hot melt extrusion. Characterisation of the pre-extrudates and extrudates was performed using hyper-differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD) and Raman spectroscopy. Water uptake by the raw materials was determined using dynamic vapour sorption (DVS) analysis. Furthermore, the presence or absence of crystalline drug following storage at 25 °C/60% relative humidity and 40 °C/75% relative humidity in a sealed glass jar, and at 40 °C/75% relative humidity in an open glass jar for 3 months was determined using PXRD. Amorphous quinine was generated in situ during extrusion from both quinine base (5%, 10%, 20% w/w drug loading) and from quinine hydrochloride (5%, 10% w/w drug loading) and remained thermodynamically stable as a solid-in-solid dispersion within the HPC extrudates. When processed with HPC, quinine hydrochloride (20% w/w) was converted to amorphous quinine hydrochloride. Whilst stable for up to 3 months when stored under sealed conditions, this amorphous form was unstable, resulting in recrystallisation of the hydrochloride salt following storage for 1 month at 40 °C/75% relative humidity in an open glass jar. The behaviour of the amorphous quinine hydrochloride (20% w/w) HPC extrudate was related, at least in part, to the lower stability and the hygroscopic properties of this amorphous form.