Quantifying the uncertainties in life cycle greenhouse gas emissions for UK wheat ethanol

Biofuels are increasingly promoted worldwide as a means for reducing greenhouse gas (GHG) emissions from transport. However, current regulatory frameworks and most academic life cycle analyses adopt a deterministic approach in determining the GHG intensities of biofuels and thus ignore the inherent risk associated with biofuel production. This study aims to develop a transparent stochastic method for evaluating UK biofuels that determines both the magnitude and uncertainty of GHG intensity on the basis of current industry practices. Using wheat ethanol as a case study, we show that the GHG intensity could span a range of 40-110 gCO2e MJ-1 when land use change (LUC) emissions and various sources of uncertainty are taken into account, as compared with a regulatory default value of 44 gCO2e MJ-1. This suggests that the current deterministic regulatory framework underestimates wheat ethanol GHG intensity and thus may not be effective in evaluating transport fuels. Uncertainties in determining the GHG intensity of UK wheat ethanol include limitations of available data at a localized scale, and significant scientific uncertainty of parameters such as soil N2O and LUC emissions. Biofuel polices should be robust enough to incorporate the currently irreducible uncertainties and flexible enough to be readily revised when better science is available. © 2013 IOP Publishing Ltd.

The impact of sand slugs against beams and plates: Coupled discrete particle/finite element simulations

The impact of a slug of dry sand particles against a metallic sandwich beam or circular sandwich plate is analysed in order to aid the design of sandwich panels for shock mitigation. The sand particles interact via a combined linear-spring-and-dashpot law whereas the face sheets and compressible core of the sandwich beam and plate are treated as rate-sensitive, elastic-plastic solids. The majority of the calculations are performed in two dimensions and entail the transverse impact of end-clamped monolithic and sandwich beams, with plane strain conditions imposed. The sand slug is of rectangular shape and comprises a random loose packing of identical, circular cylindrical particles. These calculations reveal that loading due to the sand is primarily inertial in nature with negligible fluid-structure interaction: the momentum transmitted to the beam is approximately equal to that of the incoming sand slug. For a slug of given incoming momentum, the dynamic deflection of the beam increases with decreasing duration of sand-loading until the impulsive limit is attained. Sandwich beams with thick, strong cores significantly outperform monolithic beams of equal areal mass. This performance enhancement is traced to the "sandwich effect" whereby the sandwich beams have a higher bending strength than that of the monolithic beams. Three-dimensional (3D) calculations are also performed such that the sand slug has the shape of a circular cylindrical column of finite height, and contains spherical sand particles. The 3D slug impacts a circular monolithic plate or sandwich plate and we show that sandwich plates with thick strong cores again outperform monolithic plates of equal areal mass. Finally, we demonstrate that impact by sand particles is equivalent to impact by a crushable foam projectile. The calculations on the equivalent projectile are significantly less intensive computationally, yet give predictions to within 5% of the full discrete particle calculations for the monolithic and sandwich beams and plates. These foam projectile calculations suggest that metallic foam projectiles can be used to simulate the loading by sand particles within a laboratory setting. © 2013 Elsevier Ltd.

A novel system for reducing turbo-lag by injection of compressed gas into the exhaust manifold

A key challenge in achieving good transient performance of highly boosted engines is the difficulty of accelerating the turbocharger from low air flow conditions (turbo lag). Multi-stage turbocharging, electric turbocharger assistance, electric compressors and hybrid powertrains are helpful in the mitigation of this deficit, but these technologies add significant cost and integration effort. Air-assist systems have the potential to be more cost-effective. Injecting compressed air into the intake manifold has received considerable attention, but the performance improvement offered by this concept is severely constrained by the compressor surge limit. The literature describes many schemes for generating the compressed gas, often involving significant mechanical complexity and/or cost. In this paper we demonstrate a novel exhaust assist system in which a reservoir is charged during braking. Experiments have been conducted using a 2.0 litre light-duty Diesel engine equipped with exhaust gas recirculation (EGR) and variable geometry turbine (VGT) coupled to an AC transient dynamometer, which was controlled to mimic engine load during in-gear braking and acceleration. The experimental results confirm that the proposed system reduces the time to torque during the 3rd gear tip-in by around 60%. Such a significant improvement was possible due to the increased acceleration of turbocharger immediately after the tip-in. Injecting the compressed gas into the exhaust manifold circumvents the problem of compressor surge and is the key enabler of the superior performance of the proposed concept. Copyright © 2013 SAE International.

Compressive response of glass fiber composite sandwich structures

Sandwich panels with crushable foam cores have attracted significant interest for impulsive load mitigation. We describe a method for making a lightweight, energy absorbing, glass fiber composite sandwich structure and explore it is through thickness (out-of-plane) compressive response. The sandwich structure utilized corrugated composite cores constructed from delamination resistant 3D woven E-glass fiber textiles folded over triangular cross section prismatic closed cell, PVC foam inserts. The corrugated structure was stitched to 3D woven S2-glass fiber face sheets and infiltrated with a rubber toughened, impact resistant epoxy. The quasi-static compressive stress-strain response of the panels was experimentally investigated as a function of the strut width to length ratio and compared to micromechanical predictions. Slender struts failed by elastic (Euler) buckling which transitioned to plastic microbuckling as the strut aspect ratio increased. Good agreement was observed between experimental results and micromechanical predictions over the wide range of core densities investigated in the study.

Dynamic compression of foam supported plates impacted by high velocity soil

The response of back-supported buffer plates comprising a solid face sheet and foam core backing impacted by a column of high velocity particles (sand slug) is investigated via a lumped parameter model and coupled discrete/continuum simulations. The buffer plate is either resting on (unattached) or attached to a rigid stationary foundation. The lumped parameter model is used to construct maps of the regimes of behaviour with axes of the ratio of the height of the sand slug to core thickness and the normalised core strength. Four regimes of behaviour are identified based on whether the core compression ends prior to the densification of the sand slug or vice versa. Coupled discrete/continuum simulations are also reported and compared with the lumped parameter model. While the model predicted regimes of behaviour are in excellent agreement with numerical simulations, the lumped parameter model is unable to predict the momentum transmitted to the supports as it neglects the role of elasticity in both the buffer plate and the sand slug. The numerical calculations show that the momentum transfer is minimised for intermediate values of the core strength when the so-called "soft-catch" mechanism is in play. In this regime the bounce-back of the sand slug is minimised which reduces the momentum transfer. However, in this regime, the impulse reduction is small (less than 10% of that transferred to a rigid structure). For high values of the core strength, the response of the buffer plate resembles a rigid plate with nearly no impulse mitigation while at low values of core strength, a slap event occurs when the face sheet impinges against the foundation due to full densification of the foam core. This slap event results in a significant enhancement of the momentum transfer to the foundation. The results demonstrate that appropriately designed buffer plates have potential as impulse mitigators in landmine loading situations. © 2013 Elsevier Ltd. All rights reserved.

The use of wavefront encoding to reduce crosstalk in a multicasting fiber telecom switch

A multicasting fiber optic switch employing a liquid crystal on silicon spatial light modulator is used to demonstrate wavefront encoding, a novel technique for crosstalk mitigation. Experimentally we reduce worst case crosstalk by 7.5dB. © 2012 OSA.

Vulnerability assessment of buildings subject to tunnel-induced settlements: the influence of orientation and position of the building

The assessment of settlement induced damage on buildings during the preliminary phase of tunnel excavation projects, is nowadays receiving greater attention. Analyses at different levels of detail are performed on the surface building in proximity to the tunnel, to evaluate the risk of structural damage and the need of mitigation measures. In this paper, the possibility to define a correlation between the main parameters that influence the structural response to settlement and the potential damage is investigated through numerical analysis. The adopted 3D finite element model allows to take into account important features that are neglected in more simplified approaches, like the soil-structure interaction, the nonlinear behaviour of the building, the three dimensional effect of the tunnelling induced settlement trough and the influence of openings in the structure. Aim of this approach is the development of an improved classification system taking into account the intrinsic vulnerability of the structure, which could have a relevant effect on the final damage assessment. Parametric analyses are performed, focusing on the effect of the orientation and the position of the structure with respect to the tunnel. The obtained results in terms of damage are compared with the Building Risk Assessment (BRA) procedure. This method was developed by Geodata Engineering (GDE) on the basis of empirical observations and building monitoring and applied during the construction of different metro lines in urban environment. The comparison shows a substantial agreement between the two procedures on the influence of the analysed parameters. The finite element analyses suggest a refinement of the BRA procedure for pure sagging conditions.

Computational modelling of building damage due to tunnelling

Underground constructions in soft ground may lead to settlement damage to existing buildings. In The Netherlands the situation is particularly complex, because of the combination of soft soil, fragile pile foundations and brittle, unreinforced masonry façades. The tunnelling design process in urban areas requires a reliable risk damage assessment. In the engineering practice the current preliminary damage assessment is based on the limiting tensile strain method (LTSM). Essentially this is an uncoupled analysis, in which the building is modelled as an elastic beam subject to imposed Greenfield settlements and the induced tensile strains are compared with a limit value for the material. The soil-structure interaction is included only as a ratio between the soil and the building stiffness. In this paper, a coupled approach is evaluated. The soil-structure interaction in terms of normal and shear behaviour is represented by interface elements and a cracking model for masonry is included. This project aims to improve the existing damage classification system for masonry buildings subjected to tunnel-induced settlement, in order to evaluate the necessity of strengthening techniques or mitigation measures.

使用容量指标的安全实时数据库信道限制方法

依据可信计算机系统评测标准(TCSEC)要求,提出一种使用信道容量指标的安全实时数据库中数据竞争信道的限制方法(CUCCMM),给出了限制过程中信道容量度量算法和限制参数计算方法。为了保证系统的信道容量限制标准的准确执行,提出了一种基于多概率的并发控制协议选择策略(MPBPSP)。实验结果证明CUCCMM方法可以有效地、准确地实施对隐蔽信道容量的限制,并且通过使用MPBPSP策略显著降低了信道限制操作对系统实时性能的影响。

北京地区城市热岛效应及缓解对策

伴随着全球经济一体化浪潮的来临，世界各地的经济飞速发展，同时城市化和工业化进程也在逐年加快。城市不断“摊大饼”式的蔓延扩张带来城市土地利用格局剧烈变化，同时人为热排放增加，绿地减少，这些使得城市热岛现象变得越来越严重。城市热岛效应严重影响了城市内部的各种生态过程，破坏了城市生态系统的平衡。因此，如何缓解热岛效应成为各专业科学工作者的研究热点。当前，越来越多的研究着眼于对城市热场的分布特征、热岛效应的空间布局和影响因子等，这些研究为建筑设计、城市规划建设和环境管理等提供了科学依据。 本文在综述城市热岛效应研究的基础上，针对目前研究中存在的问题，综合利用移动样带法、定点观测法和遥感定量分析法，在局部地区和城市尺度分别对北京市的热岛效应进行观测、评价，分析了城市热岛强度与土地利用因子、工业格局之间的关系，最后提出缓解城市热岛效应的对策，并重点描述了“冷桥系统”的构建。观测结果表明： 1、北京市中轴线上的热场呈“M”型分布，即二环内部温度相对较低，三环至五环温度升高，而后又下降。这主要是由于二环内传感器接受的辐射强度小、人为热排放少、植被绿化完善和建筑、道路尺度较小所造成的。二环内部存在低温区，证明二环以内仍然具备良好的人居环境。 2、城市各种土地利用类型中，林地的降温效果最显著，而不透水地面（不包括建筑）的增温效果最显著，且它们对热环境的影响范围都在1 km以内。鉴于林地和不透水地面（不包括建筑）的这个特性，在规划城市冷桥系统时可以以1 km为基本单元，以有效缓解城市热岛效应。 3、利用遥感手段对城市热岛效应的研究发现，城市工业布局和城市化发展趋势与热岛效应的空间分布具有高度的一致性，且工业区的热岛强度极显著高于建成区。统计结果表明，北京市五环内的亮度温度的热岛强度为3.81 K，其中二环内的热岛强度为4.03 K，三环内的热岛强度为3.90 K，四环内的热岛强度为3.88 K。 最后，文章提出了缓解城市热岛效应的对策。除了传统的增加绿地，减少热排放和大气污染等方法以外，本文着重从调整城市格局的角度提出了城市冷桥系统的概念与构建方法，并以北京市做案例分析。构建冷桥系统可以促进城乡间的气体交换，有效完善城市的景观安全格局，保证城市的生态安全，从而最终达到改善城市人居环境，保障居民身心健康的目的。

水幕减爆防护技术数值仿真

高能炸药爆轰爆炸在极短的时间内产生强烈的冲击波,对周边的结构造成严重的破坏,并导致附近人员的伤亡.水幕减爆作为一种新颖的防护技术,通过在装药或者需要保护结构的外面布置水袋,利用水的加热、压缩和蒸发转移爆炸产生的能量,改变爆炸冲击波的传播方式,减弱爆炸冲击波的影响.建立安全可靠、稳定有效的水幕减爆装置需要大量的参数分析,从而进行优化设计.数值实验仿真提供了研究水幕减爆成本低廉并且没有任何危险的可行方式.传统的网格方法模拟水幕减爆问题存在很多困难.该文应用无网格粒子方法SPH对不同状况下的水幕减爆问题进行了一系列研究,得到一些初步的研究结果,对水幕减爆防护装置的设计和布置具有一定的指导意义.

花椒主效化感物质分离鉴定及化感作用研究

近年来，随着对作物重茬障碍原因的深入研究，植物的化感作用越来越受到国内外众多学者的重视。花椒（Zanthoxy piperitum.）为芸香科植物，是一种收益早、用途广、价值高的经济树种，是川西干旱河谷地区的重要经济作物，其连作障碍也倍受关注，系统研究花椒化感作用将有助于理解和最终解决花椒连作障碍问题。本文首先通过萃取、层析等方法分离花椒主效化感成分；通过外加不同浓度的花椒叶水浸液研究了对土壤氮素养分循环的影响；研究了花椒叶水浸液对苜蓿生理生化、光合作用、氮素养分吸收的影响，并对外施氮肥对这种化感影响的缓解作用做了研究；研究了花椒化感潜力对全球变化——UV-B增强辐射的响应。主要研究结果如下： 1．用不同极性的有机溶剂对花椒叶水浸液浓缩浸膏萃取、柱层析，结合生物活性检测，分离得到主效化感作用组分的一种化感物质——对甲氧基苯酚。采用该物质纯品进行生物活性检测，证明其具有化感作用。 2．花椒叶水浸液处理土壤30天后，土壤硝态氮、铵态氮、无机氮（硝态氮＋铵态氮）与对照相比，随着花椒叶水浸液浓度的增加呈现降低的趋势，其中土壤铵态氮含量显著降低，而硝态氮含量的变化则不显著，无机氮含量也显著降低。土壤脲酶和蛋白酶的活性与无机氮含量的变化趋势相同。随着花椒叶水浸液浓度的增加，氨化细菌数量显著降低，固氮菌的数量变化不显著，硝化细菌和反硝化细菌数量有减少的趋势。60天后，硝态氮含量、铵态氮含量、无机氮随水浸液浓度增加的变化趋势与30天时相似；随着花椒叶水浸液浓度的增加，氨化细菌、固氮菌的数量显著减少，硝化细菌数量、反硝化细菌数量仍呈减少趋势；土壤脲酶、蛋白酶活性与第30天的变化趋势相同。第60天与第30天的结果相比，相同水浸液浓度处理的硝态氮、铵态氮、无机氮均有下降的趋势，但除了25g.L－1水浸液处理的外，其它相同浓度的处理间差异均不显著；除了12.5 g.L的处理外土壤脲酶活性均呈增强的趋势；蛋白酶活性都有不同程度的增加；花椒叶水浸液处理的土壤硝化细菌和反硝化细菌数量呈增加趋势。 3．随着花椒叶水浸液浓度的增加，显著抑制了苜蓿根长、地上地下生物量、叶绿素含量、叶片中可溶性蛋白的含量，净光合速率。苜蓿体内四种抗氧化酶（POD、SOD、CAT、APX） 活性随着水浸液浓度的增加而降低，而丙二醛含量则增加。苜蓿氮初级同化相关酶硝酸还原酶（NR）、谷氨酰合成酶(GS)、谷氨酸脱氢酶（GDH）的活性随着水浸液浓度的增加受到不同程度的影响。总的来说，苜蓿硝酸还原酶、谷氨酰合成酶的活性受到抑制，而谷氨酸脱氢酶活性的变化则比较复杂，根呈先降低后增加的趋势，叶片则无显著变化。外施两种不同浓度的硝酸铵氮肥后，对12.5、25 g.L－1花椒叶水浸液处理的苜蓿化感作用有显著的缓解作用，表现在株高、生物量、光合作用等方面，大多达到与对照（0 g.L－1）未施氮肥无显著差异的水平，而对50 g.L－1水浸液处理的苜蓿幼苗，虽有一定的缓解作用，但这种作用均未达到与对照（0 g.L－1）未施氮肥时无显著差异的水平。 4． UV-B增强辐射处理花椒后，花椒的化感潜力显著增强。花椒叶片内UV-B吸收物质的含量和总酚含量均显著增加。 In recent years, with profound research on the reasons of continuous cropping obstacles, allelopathy received increasing attention to many scholars at home and abroad. Zanthoxy bungeanum as a Rutaceae plant is a high economic value species which gains early and uses widely. Zanthoxylum is an important economic crop in the arid valley of western Sichuan region, and its not even has received much concern for the continuous cropping obstacles. The systematic study of allelopathy of Zanthoxylum will contribute to the understanding and final settlement of this issue. The major allelopathic composition was separated through the extraction, chromatography combined with other methods. The impact on soil nutrient cycling was also studied through the addition of different concentrations of water extracts of Zanthoxylum. Furthermore, the effects of water extracts of Zanthoxylum leaves on alfalfa leaf physiological and biochemical indexes, photosynthesis, soil enzymes and nutrient uptake of nitrogen and the mitigation of allelopathy through using external fertilizer were studied to put forward scientific resolvent for Zanthoxylum continuous cropping obstacles .The response of allelopathic potential of Zanthoxylum to global change - UV-B enhanced radiation was studied . The main findings are as follows: 1. Through extraction with different polar organic solvents on concentrated water extract of Zanthoxylum leaf and then using column chromatography combined with detection of biological activity, one of the main allelopathic components- methoxy-phenol was isolated. The biological activity testing of the pure material of methoxy-phenol proved that it does have allelopathic potential. 2. Thirty days after treating soil with water extract of Zanthoxylum leaf, as compared with the control, the contents of soil nitrate, ammonium, nitrate plus ammonium nitrogen showed a trend of decrease with the increase of the concentration of water extract whereas the content of ammonium nitrogen showed a significant reduction, and the content of nitrate did not change significantly, the content of nitrate plus ammonium nitrogen also showed a significant (P <0.05) redction. The activity of soil urease and protease showed the same trend as the content of nitrate nitrogen plus ammonium nitrogen. With the increase in the concentration of water extract, the number of ammonification bacteria significantly reduced but nitrogen-fixing bacteria did not change significantly and there was a decreasing trend in the number of nitrifying bacteria and denitrifying bacteria. Sixty days after the treatment, with the increase in solution concentration of water extract of Zanthoxylum leaf, the content of nitrate、 ammonium nitrogen, nitrate plus ammonium nitrogen showed a similar change trend to 30 days’; the number of ammonification bacteria, nitrogen-fixing bacteria significantly reduced ; the number of nitrifying bacteria, denitrifying bacteria was still an downward trend; the activity of soil urease and protease showed the same trend as the 30th days’. Compared to the results of the 30th days’, the content of nitrate, ammonium, nitrate plus ammonium nitrogen showed a decrease trend between the treatment of same concentration, but there was no significant difference except the treatment of 25g.L-1 between the same concentration; the activity of soil urease showed enhanced trend except the treatment of 12.5 g.L-1; the activity of protease increased to varying degrees; the number of ammonification bacteria、 nitrifying bacteria and denitrifying bacteria were growing while nitrogen-fixing bacteria reduced.. 3. With the increase of the concentration of water extract of Zanthoxylum leaf, the water extract significantly inhibited the root length, aboveground biomass, content of chlorophyll and soluble protein in leaf and net photosynthetic rate. The activity of four antioxidant enzymes (POD, SOD, CAT, APX) reduced with the increase in concentration of the water extract but the content of MDA increased. The activity of enzymes related to primary nitrogen assimilation such nitrate reductase (NR), glutamyl synthetase (GS), glutamate dehydrogenase (GDH) were subject to different degrees with an increase in the concentration of water extracts. In general, the activity of nitrate reductase, glutamyl synthetase were inhibited, while change in the activity of glutamate dehydrogenase was more complex. The activity of glutamate dehydrogenase in leaf was first reduced and then increase,but did not change significantly in root. After using two external different concentrations of nitrogen fertilizer, there was a significant mitigation in inhibiton in plant height, biomass, photosynthesis, etc. in the treatment of 12.5,25 gL-1 of water extract of Zanthoxylum leaf, and most of these indexes showed no significant difference with the control (0 g.L-1, no external fertilizer was added) .Although there showed a certain degree of ease in the treatment of 50 g.L-1 , there was still a significant difference compared with the control (0 gL-1) in which no external fertilizer was used. 4.The allelopathic potential of Zanthoxylum positively responded to enhanced UV-B significantly. The content of UV-B absorbing compounds and the total phenol also significant increased.

垃圾渗滤液场外硝化－原位反硝化脱氮协同填埋场温室气体减排

垃圾卫生填埋是国内外城市垃圾的主要处置方法。垃圾渗滤液是渗入填埋场垃圾的降水混合垃圾降解过程中产生的物质而形成的混合物，是垃圾填埋场向环境排放的主要污染物。渗滤液由于其所含高浓度有机和无机污染物，且其中很多物质有生物毒性或难生物降解，难于治理。特别是到填埋晚期，渗滤液中高浓度的氨氮更是增加了治理的难度。渗滤液场外硝化－原位反硝化是填埋场氮管理的新途径。本文利用从环境中筛选出优势硝化功能菌对渗滤液中的高浓度氨氮进行生物硝化，经硝化后的渗滤液回灌至以垃圾柱模拟的生物反应器填埋场，在填埋场内实现原位反硝化。 上述目标通过以下两部分来实现： 第一部分：渗滤液场外硝化。首先从污水厂的硝化污泥中富集并筛选出硝化功能菌，在模拟氨氮废水中优化。将驯化的硝化功能菌接种于连续式完全混合反应器（CSTR）进行高氨氮渗滤液硝化研究。在200余天的连续运行中，反应器硝化和有机物去除效果良好。在最大氨氮负荷和有机物负荷分别为0.65 g N l-1 d-1 和3.84 g COD l-1 d-1时，氨氮和COD去除率分别高于99%和57%。实验过程中发现，游离氨（FA）和溶解氧（DO）浓度对反应器中亚硝酸盐的积累影响很大。 第二部分：渗滤液原位反硝化。本文利用一个垃圾填充柱模拟生物反应器填埋场，研究了硝化渗滤液回灌对垃圾降解的影响，和回灌的硝化渗滤液中TON（总氧化态氮）对填埋场生物反应器产甲烷作用的影响。最后利用变性梯度凝胶电泳（DGGE）分析了硝化渗滤液回灌对垃圾填埋场菌群结构的影响。结果表明：回灌的TON被完全还原，反硝化为主要反应，最大TON负荷为28.6 mg N kg-1 TS d-1。当垃圾柱TON负荷大于11.4 mg N kg-1 TS d-1时，出现了产甲烷抑制，抑制作用随TON负荷的增加而加强。在此过程中，反硝化逐渐代替产甲烷作用成为填埋场内垃圾降解的主要反应，且更多产生的是清洁的氮气，而非温室气体甲烷。直到实验结束时，回灌硝化渗滤液的垃圾柱的甲烷产量仅相当于对照的2.5%，并且回灌的硝化渗滤液还加速了填埋场垃圾的降解与稳定。通过DGGE进行菌群结构分析发现，由于TON对填埋场的长期作用，反硝化菌增多而产甲烷菌减少。 Landfill still remains the chief method for MSW management around the world. Leachate is a mixture of rainfall permeating through landfill and organic and inorganic matters generated during decomposition of the wastes in the landfills, characterized as highly complicated and refractory wastewater. Ex-situ nitrification and sequential in-situ denitrification represents a novel approach to nitrogen management at landfills. In the present paper, nitrification was carried out in a continuous stirred tank reactor (CSTR) inoculated with nitrifying bacteria which were isolated from municipal WWTP of Chengdu city. The nitrified leachate from CSTR was recirculated to a lab-scale municipal solid waste (MSW) column where in-situ denitrification took place. The above object was achived through two parts as following: First, ex-situ nitification of leachate. After acclimated in simulated wastewater for 3 month, nitrifying bacteria isolated from WWTP nitrifying sludge were added to the CSTR for nitrification. The results over 200 days showed that the maximum nitrogen loading rate (NLR) and the maximum organic loading rate (OLR) was 0.65 g N l-1 d-1 and 3.84 g COD l-1 d-1, respectively. The ammonia and COD removal was over 99% and 57%, respectively. Moreover, the effects of free ammonia (FA) and dissolved oxygen (DO) on nitrification were investigated. Second, in-situ denitrification was studied in a municipal solid waste (MSW) column. Variation of nitrified leachate and its effects on the decomposition of municipal solid waste (MSW) were studied in a lab-scale MSW column to which nitrified leachate was recirculated. Additionally, DGGE was employed to investigate the microbial community of both MSW columns. The results suggested: complete reduction of total oxidized nitrogen (TON) was obtained with maximum TON load of 28.6 mg N kg-1 TS d-1 and denitrification was the main reaction responsible. Methanogenesis inhibition was observed while TON load was over 11.4 mg N kg-1 TS d-1 and the inhibition was enhanced with the increase of TON load. Denitrification gradually took over methanogenesis to become the main reaction responsible for decomposition of MSW while nitrogen gas, a clean byproduct, was generated instead. Till the end of the experiment, the average weekly methane production in the denitrification column was as low as 2.5% of that of the control, and the rate of decompition and stability of MSW was accelerated by the recirculation of the nitrified leachate.Owing to long term exposure of nitrified leachate to landfill, denitrifying bacteria increased and methanogen decreased.

论自然保护与资源开发的策略

The conservation of species requires preservation of natural habitats,where the integrity of natural habitats has been severely disturbed and species goes extinct. All natural habitats are continuing to decline both inside and outside of reserves. Habitat change is partly a natural process (e.g., succession), but human activities have accelerated the process so that natural rate of renewal is insufficient to maintain natural habitats. This paper provided concept, methods of habitat renewal, habitat mitigation and their implication to protection and exploitation of natural resource. We argue that our only resourse, in light of these scenarios, is to adopt a new conservation strategy that considers the importance of habitat renewal and habitat mitigation in addition to habitat preservation. Accordingly, in our management decision, we must not only choose the size of area to preserve ,but also the size of area to balance habitat loss with habitat renewal or habitat mitigation. Finally, we explored the application of habitat renewal and habitat mitigation in regional sustainable development of Liaohe Delta wetland.