Chemical inhibition of the contaminant Lactobacillus fermentum from distilleries producing fuel bioethanol

The purpose of this study was to determine the Minimum Inhibitory Concentration (MIC) of pure or mixed chemicals for Saccharomyces cerevisiae and Lactobacillus fermentum in the samples isolated from distilleries with serious bacterial contamination problems. The biocides, which showed the best results were: 3,4,4' trichlorocarbanilide (TCC), tested at pH 4.0 (MIC = 3.12 mg/l), TCC with benzethonium chloride (CBe) at pH 6.0 (MIC = 3.12 mg/l) and TCC mixed with benzalkonium chloride (CBa) at pH 6.0 (MIC = 1.53 mg /l). If CBa was used in sugar cane milling in 1:1 ratio with TCC, a 8 times reduction of CBa was possible. This formulation also should be tested in fermentation steps since it was more difficult for the bacterium to develop resistance to biocide. There was no inhibition of S. cerevisiae and there were only antibiotics as an option to bacterial control of fuel ethanol fermentation by S. cerevisiae.

Clonagem e expressão do gene engXCA de Xanthomonas campestri pv. campestris em Saccharmyces cerevisiae e estudos das endoglucanases nativa e recombinante

Pós-graduação em Biotecnologia - IQ

Desenvolvimento de sensor baseado em eletrodo modificado com nanotubos de carbono contendo pentacianonitrosilferratos de metais para determinação de antioxidantes em microemulsão de biodiesel

Pós-graduação em Química - IQ

Electrochemical Determination of Organic Compounds in Automotive Fuels

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Comparative analysis between a PEM fuel cell and an internal combustion engine driving an electricity generator: Technical, economical and ecological aspects

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Simultaneous Determination of Iron and Copper in Ethanol Fuel Using Nafion/Carbon Nanotubes Electrode

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Structure and properties of chemically synthesized BiFeO3. Influence of fuel and complexing agent

Perovskite, single multiferroic bismuth ferrite was prepared by two chemical methods: auto-combustion and soft chemical route. Influence of different fuels and complexing agents and thermal treatment on purity of bismuth ferrite powders and density of bismuth ferrite ceramics were investigated. X-ray diffraction technique (XRD) indicated that optimal temperatures and times for calcination and sintering are 600 degrees C for 2 h and 800 degrees C for 1 h with quenching, respectively. Scanning electron microscopy (SEM) analysis showed that soft route synthesized samples formed softer agglomerates and smaller grains with less secondary phases. Powders and pellets were characterized by Brunauer Emmett Teller (BET) specific surface area analysis, particle size distribution, Fourier transform infrared spectroscopy (FT-IR), dilatometry, Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), dielectric and magnetic measurements. Resistivity and origin of electrical resistance were studied by means of impedance measurements. (C) 2014 Elsevier Ltd and Techna Group S.r.l. All rights reserved.

The first fossil avian egg from Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The puzzle assembled: Ediacaran guide fossil Cloudina reveals an old proto-Gondwana seaway

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Heydrichia (?) poignantii, sp nov (Sporolithaceae, Sporolithales, Rhodophyta), a 100 million year old fossil coralline red alga from north-eastern Brazil, and a new Hauterivian record of Sporolithon from Switzerland

Fossil specimens of Heydrichia (?) poignantii, sp. nov. (Sporolithaceae, Sporolithales, Rhodophyta), representing the first confirmation of the genus in the fossil record, were discovered in thin sections of Albian limestones from the Riachuelo Formation, Sergipe Basin, and in thin sections of Albian -Cenomanian limestones from the Ponta do Mel Formation, Potiguar Basin in north-eastern Brazil. A detailed morphological-anatomical account of the species is provided, and its placement in Heydrichia is discussed in relation to current classification proposals. Comparisons with the four other known species of the genus, all non-fossil, show that H. poignantii is the only known species of Heydrichia in which thalli are encrusting to sparsely warty to horizontally layered with overlapping lamellate branches that commonly appear variously curved or arched, and in which thalli have sporangial complexes that become buried in the thallus. The evolutionary history of Heydrichia remains uncertain, but available data suggest that the genus may have diverged from the sporolithacean genus Sporolithon, known as early as Hauterivian times (c. 129.4-132.9 +/- 1 Ma) from Spain (and newly reported here from Switzerland), or it may have arisen from a graticulacean alga such as Graticula, dating from mid-Silurian times (c. 427-435 Ma). Current data also suggest that Heydrichia is more likely to have arrived in Brazil from Central Atlantic waters than from higher latitude South Atlantic waters. This implies that currently living species in southern Africa probably arose later from ancestors further equatorward in the South Atlantic, although confirming studies are needed. All non-fossil species of Heydrichia are known only from the southern hemisphere.

Avaliação dos gases de efeito estufa a partir do carvão

This paper addresses the context of emissions of Greenhouse Gases (GHG) from activities related to Coal, called fugitive emissions. The survey of factors, development, analysis, and suggestions for controlling emissions are conducted in order to reduce risks to the environment and people around it. The greenhouse gases absorb radiation, emitted by the Earth’s surface, and hinder their escape into space. This process is essential to terrestrial life. Increasing the concentration of those gases in the atmosphere has led to an increase in the terrestrial temperature. A selection of processes that emit gases and the study and development of calculations for measuring fugitive emissions applied in different sources from coal are performed. The greenhouse gases can be released from the extraction, processing, storage, and transportation of fossil fuels to the end consumer. Coal has 4 main fugitive factors: mining, post-mining, oxidation at low temperature, and uncontrolled combustion. The coal formation process produces methane (CH4) and carbon dioxide (CO2), being the methane, the main greenhouse gas from the coal mining and handling. The types of activities and the weight of each in the issuing process are observed. It is also made comparisons between the countries with the highest emissions rates. Are evaluated what has been done and what is needed to decrease emissions, for example the use of gas as an alternative fuel for energy generation

Análise da viabilidade de motorização elétrica do soprador no ciclo regenerativo da unidade de craqueamento catalítico fluidizado em uma refinaria

One of the biggest environmental problems of today is the climate change. Experts affirm that this global warming is related to the greenhouse effect. Its causes are directly related to human activity, especially the use of fossil fuels. In this context, companies around the world are challenged to improve energy efficiency in order to reduce the environmental impact and work toward the so-called tripod of sustainable development that focuses on the social, economic and environmental aspects of a business strategy. The first step a company can make in this regard is to conduct an inventory of emissions of greenhouse gases (GHGs). The reduction of GHG emissions in a refinery can be achieved by replacing steam turbines with electric motors to drive big machines, this reduction is achieved by relieving the steam consumption for electric power available or purchased. An important aspect associated with the reduction of GHG emissions is the best performance of the Energy Intensity Index (ERI). The objective of this study was to analyze the feasibility of the blower motorization in the regenerative cycle of a fluidized catalytic cracking unit at a specific refinery. For development work, two methods were used, the initial screening and optimization scenarios with the help of software Butyl. The results indicate that after a certain cost of natural gas this substitution becomes favorable. In addition, there is a large reduction of CO2 emissions avoided by burning fuel

Proposta de traçado de alcoolduto ligando a hidrovia Tietê Paraná à refinaria do planalto paulista com uso de avaliação multicritérios e geotecnologias

From the beginning of the century, with the advent of the flex fuel car, successor fluctuations in oil prices and the rise of awareness of the impending shortage of fossil fuels, the alcohol sector begins to reappear in the panorama of national economy making Brasill reaches the point of becoming a leading exporter of this product. Ethanol assumed the role of such importance in Brazilian exports, which Petrobras through the Growth Acceleration Program (PAC) has made investments in the Brazilian pipeline network to better ensure the production of ethanol to major ports. The means of transport in pipelines are safe and inexpensive, but require careful evaluation in its implementation, they may lead to negative social and environmental impacts. Thus, the purpose of this project is to propose the best route for an ethanol pipeline connectin the Tietê-Paraná, leaving the municipality of Santa Maria da Serra (SP), to the Planalto Paulista Refinery (REPLAN), located in Paulinia (SP), belonging to the passage of ethanol export corridor, currently under revelopment. The technique used for the development of the stroke is the association of multicriteria evaluation, the geographical information system (SIG) and geotechnologies. This study presented three possible layouts for the ethanol pipeline, highlighting the best option, in addition, demonstrated the suitability of the area to receive projects of similar nature to a pipeline

Amostragem de poluentes particulados emitidos pela queima de biomassa em correntes confinadas

It is clear today the ever-accelerating search for new fuels that will eventually replace those that will survive in our society, which are fossil fuels. For this reason, a fuel used since the dawn of humanity and much studied since then, considered the generator of clean, renewable energy, can earn more and more space in the power generation sector, which is biomass. We performed two experiments with two different types of biomass, one from the Amazon rainforest and other pine and eucalyptus as waste from the sawmill UNESP Itapeva. In the first experiment, conducted at the Laboratory of Combustion and Propulsion INPE Cachoeira Paulista were conducted three tests in a chimney with a fan creating forced ventilation, where the biomass was burned and deposited on a support beneath the hood. In the second experiment was conducted to analyze the emission of particulate matter using biomass (waste) from the sawmill on the campus of UNESP experimental Itapeva the burning of it in a burner for heating water for a wood oven. In these experiments we used a particle called DATARAM4 sampler that is capable of sampling both outdoors and inside of pipelines, which is the focus of this work. With this equipment it was possible to measure the concentration of particulate matter in all the firings as above, and compare them to levels acceptable in the current law, always trying to analyze the so-called fine particles, which are those with diameters less than 2.5 μm. Using data obtained from the equipment was also possible to evaluate the diametral distribution of particulate matter in question, and verify which phases of the flares in the concentration and the diameters of the particles are the most critical. In this work we concluded that in all firings conducted concentrations of particulate matter were higher than that allowed by the law, and the diameters were found that are more harmful to human health

The Mutagenic Potential Caused by the Emissions from Combustion of Crude Glycerin and Diesel Fuel

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)