Two distinct filopodia populations at the growth cone allow to sense nanotopographical extracellular matrix cues to guide neurite outgrowth

BACKGROUND The process of neurite outgrowth is the initial step in producing the neuronal processes that wire the brain. Current models about neurite outgrowth have been derived from classic two-dimensional (2D) cell culture systems, which do not recapitulate the topographical cues that are present in the extracellular matrix (ECM) in vivo. Here, we explore how ECM nanotopography influences neurite outgrowth. METHODOLOGY/PRINCIPAL FINDINGS We show that, when the ECM protein laminin is presented on a line pattern with nanometric size features, it leads to orientation of neurite outgrowth along the line pattern. This is also coupled with a robust increase in neurite length. The sensing mechanism that allows neurite orientation occurs through a highly stereotypical growth cone behavior involving two filopodia populations. Non-aligned filopodia on the distal part of the growth cone scan the pattern in a lateral back and forth motion and are highly unstable. Filopodia at the growth cone tip align with the line substrate, are stabilized by an F-actin rich cytoskeleton and enable steady neurite extension. This stabilization event most likely occurs by integration of signals emanating from non-aligned and aligned filopodia which sense different extent of adhesion surface on the line pattern. In contrast, on the 2D substrate only unstable filopodia are observed at the growth cone, leading to frequent neurite collapse events and less efficient outgrowth. CONCLUSIONS/SIGNIFICANCE We propose that a constant crosstalk between both filopodia populations allows stochastic sensing of nanotopographical ECM cues, leading to oriented and steady neurite outgrowth. Our work provides insight in how neuronal growth cones can sense geometric ECM cues. This has not been accessible previously using routine 2D culture systems.

Burrowing in Marine Muds by Crack Propagation: Kinematics and Forces

The polychaete Nereis virens burrows through muddy sediments by exerting dorsoventral forces against the walls of its tongue-depressor- shaped burrow to extend an oblate hemispheroidal crack. Stress is concentrated at the crack tip, which extends when the stress intensity factor (K-I) exceeds the critical stress intensity factor (K-Ic). Relevant forces were measured in gelatin, an analog for elastic muds, by photoelastic stress analysis, and were 0.015 +/- 0.001 N (mean +/- s.d.;N= 5). Measured elastic moduli (E) for gelatin and sediment were used in finite element models to convert the forces in gelatin to those required in muds to maintain the same body shapes observed in gelatin. The force increases directly with increasing sediment stiffness, and is 0.16 N for measured sediment stiffness of E=2.7x10(4) Pa. This measurement of forces exerted by burrowers is the first that explicitly considers the mechanical behavior of the sediment. Calculated stress intensity factors fall within the range of critical values for gelatin and exceed those for sediment, showing that crack propagation is a mechanically feasible mechanism of burrowing. The pharynx extends anteriorly as it everts, extending the crack tip only as far as the anterior of the worm, consistent with wedge-driven fracture and drawing obvious parallels between soft-bodied burrowers and more rigid, wedge-shaped burrowers(i.e. clams). Our results raise questions about the reputed high energetic cost of burrowing and emphasize the need for better understanding of sediment mechanics to quantify external energy expenditure during burrowing.

Integrin mediated growth and apoptosis in human gastric adenocarcinoma

Integrins are important as the primary cell adhesion molecule providing information about the extracellular microenvironment to the interior of the cell to influence cellular behavior such as differentiation, proliferation and apoptosis. Apoptotic death due to loss of adhesion is termed anoikis. In this study we have obtained a parental human gastric adenocarcinoma cell line that yielded two variant lines that had differing responses to lack of adhesion. The STAD.APO cell line undergoes apoptosis when denied adherence and the STAD.ARR cell line enters into cell cycle arrest under the identical suspended conditions. We have shown that cyclin A and cyclin D mRNA and protein are down regulated when cells are denied adherence for 24 hours in tissue culture wells previously coated with poly-HEMA. To test whether cyclin A was able to rescue cells from cell cycle arrest and/or anoikis by overriding the cell cycle machinery we transfected the full length cDNA in to each cell type. Surprisingly we found that anoikis and cell cycle arrest due to suspended conditions was not affected by overexpression of cyclin A protein, but that growth under adhered conditions was reduced compared to vector alone control transfectants. Further, we transfected other cell lines; ST7, gastric cancer, MDA-MB-4.35, breast cancer, and HPB T-cell leukemic and in no case were suspended culturing conditions overcome by cyclin A. This result indicates an additional level of regulation for the cell cycle machinery. Additionally, soluble collagen was shown to be able to save from anoikis and also from cell cycle arrest while the β1 specific mAb 33B6 was only able to save from anoikis. Immunofluorescent studies show that soluble collagen creates clusters of β1 with FAK and also β1 with actin in the STAD.ARR cells but does not in the STAD.APO cells. This result indicates that the phenotypes under suspended conditions between these cell lines may diverge at their requirements for integrin ligation. Additionally we characterized the nature of anoikis by showing cytochrome c release, caspase 3, p21 and p53 activation in STAD.APO cells. Thus, our results have implications in the understanding of integrin biology and neoplastic progression. ^

An examination of the Gonorrhea Cases & Places study: An analysis of the Theory of Gender and Power, Situational/Environmental Variables Theory, and Sexual Script Theory as it relates to risky sexual behavior in African American adults

Objective. The purpose of the study is to provide a holistic depiction of behavioral & environmental factors contributing to risky sexual behaviors among predominantly high school educated, low-income African Americans residing in urban areas of Houston, TX utilizing the Theory of Gender and Power, Situational/Environmental Variables Theory, and Sexual Script Theory. ^ Methods. A cross-sectional study was conducted via questionnaires among 215 Houston area residents, 149 were women and 66 were male. Measures used to assess behaviors of the population included a history of homelessness, use of crack/cocaine among several other illicit drugs, the type of sexual partner, age of participant, age of most recent sex partner, whether or not participants sought health care in the last 12 months, knowledge of partner's other sexual activities, symptoms of depression, and places where partner's were met. In an effort to determine risk of sexual encounters, a risk index employing the variables used to assess condom use was created categorizing sexual encounters as unsafe or safe. ^ Results. Variables meeting the significance level of p<.15 for the bivariate analysis of each theory were entered into a binary logistic regression analysis. The block for each theory was significant, suggesting that the grouping assignments of each variable by theory were significantly associated with unsafe sexual behaviors. Within the regression analysis, variables such as sex for drugs/money, low income, and crack use demonstrated an effect size of ≥±1, indicating that these variables had a significant effect on unsafe sexual behavioral practices. ^ Conclusions. Variables assessing behavior and environment demonstrated a significant effect when categorized by relation to designated theories. ^

Fruit yield and growth parameters of several Carica papaya L. genotypes in a temperate climate

The aim of this work was to evaluate changes in growth and productivity parameters of different precocious hybrids and a naturalized variety of papaya under both greenhouse and field cultivation in a temperate climate (the center of the province of Santa Fe, Argentina). In view of the aforesaid, the purpose of our research was to identify further genotypes better suited for the cultivation of this species in temperate climates and demonstrate the need for the use of semi-controlled systems to make possible the cultivation of these promising genotypes in middle latitudes. The average yield was 291% higher in greenhouse than in the field. The average productivity for hybrid genotypes compared with the naturalized variety more than doubled in both environments. Considering behavior in height, leaf area index and yield parameters, hybrids H2 (principally), and H4 showed a great adaptation for use in semi-forced systems. The use of greenhouse and short stature papaya hybrids allows its feasible and surely profitable cultivation in non- tropical climates.

Seawater carbonate chemistry, survival rate, shell mass growth, shell dissolution and locomotory speed of Limacina retroversa in a laboratory experiment

Anthropogenic carbon dioxide emissions induce ocean acidification, thereby reducing carbonate ion concentration, which may affect the ability of calcifying organisms to build shells. Pteropods, the main planktonic producers of aragonite in the worlds' oceans, may be particularly vulnerable to changes in sea water chemistry. The negative effects are expected to be most severe at high-latitudes, where natural carbonate ion concentrations are low. In this study we investigated the combined effects of ocean acidification and freshening on Limacina retroversa, the dominant pteropod in sub polar areas. Living L. retroversa, collected in Northern Norwegian Sea, were exposed to four different pH values ranging from the pre-industrial level to the forecasted end of century ocean acidification scenario. Since over the past half-century the Norwegian Sea has experienced a progressive freshening with time, each pH level was combined with a salinity gradient in two factorial, randomized experiments investigating shell degradation, swimming behavior and survival. In addition, to investigate shell degradation without any physiologic influence, one perturbation experiments using only shells of dead pteropods was performed. Lower pH reduced shell mass whereas shell dissolution increased with pCO2. Interestingly, shells of dead organisms had a higher degree of dissolution than shells of living individuals. Mortality of Limacina retroversa was strongly affected only when both pH and salinity reduced simultaneously. The combined effects of lower salinity and lower pH also affected negatively the ability of pteropods to swim upwards. Results suggest that the energy cost of maintaining ion balance and avoiding sinking (in low salinity scenario) combined with the extra energy cost necessary to counteract shell dissolution (in high pCO2 scenario), exceed the available energy budget of this organism causing the pteropods to change swimming behavior and begin to collapse. Since L. retroversa play an important role in the transport of carbonates to the deep oceans these findings have significant implications for the mechanisms influencing the inorganic carbon cycle in the sub-polar area.

Growth of the Firm and Economic Backwardness: A Case Study and Analysis of China's Mobile Handset Industry

Economic backwardness often influences the growth of firms in developing countries. In this paper, we investigate the growth conditions and paths available for latecomers competing with first movers. Employing the concepts of boundaries of the firm and the disadvantage of backwardness, we present a case study of China's mobile handset industry and proceed to develop a simple model. We find that although significant disadvantage does not allow latecomers to grow, there are possibilities for changing the conditions of growth if latecomers can utilize outside resources and/or indigenous advantages.

The Technology Gap and the Growth of the Firm: A Case Study of China's Mobile-phone Handset Industry

We have examined the way in which local Chinese firms confronted with a technology gap have achieved growth, using the Chinese handset industry as a case study. Chinese local firms have lacked technology, and have therefore turned to outside firms for development, design, and manufacturing, while they themselves have focused on sales and marketing, using their advantage of familiarity with the Chinese market. Consequently, by establishing a growth condition in which their selection of boundaries counterbalances the technology gap they have been able to expand their market share in comparison with foreign firms.

Voting behavior in Indonesia from 1999 to 2014 : religious cleavage or economic performance?

In this study, we examine the voting behavior in Indonesian parliamentary elections from 1999 to 2014. After summarizing the changes in Indonesian parties' share of the vote from a historical standpoint, we investigate the voting behavior with simple regression models to analyze the effect of regional characteristics on Islamic/secular parties' vote share, using aggregated panel data at the district level. Then, we also test the hypothesis of retrospective economic voting. The results show that districts which formerly stood strongly behind Islamic parties continued to select those parties, or gave preference to abstention over the parties in some elections. From the point of view of retrospective economic voting, we found that districts which experienced higher per capita economic growth gave more support to the ruling parties, although our results remain tentative because information on 2014 is not yet available.

Excess capital and bank behavior : evidence from Indonesia

The Indonesian banking sector has been restructured since Asian financial crisis and restored to soundness. The capital adequacy ratio (CAR) returned to a sound level; however, the average excess capital has become too high, while credit disbursement has remained low. This paper investigates the determinants of excess capital among Indonesian banks and its effects on credit growth during the 2000s. The results indicate that the determinants of excess capital vary widely depending on bank type. Return on equity (ROE) affects excess capital negatively among domestic banks, and the effect of non-performing loans is mixed, differing for various bank types. Excess capital affects credit growth positively, except among foreign banks.

InN/GaN heterojunction electrical behavior

Indium nitride (InN) has been the subject of intense research in recent years. Some of its most attractive features are its excellent transport properties such as its small band edge electron effective mass, high electron mobilities and peak drift velocities, and high frequency transient drift velocity oscillations [1]. These suggest enormous potential applications for InN in high frequency electronic devices. But to date the high unintentional bulk electron concentration (n~1018 cm-3) of undoped InN samples and the surface electron accumulation layer make it a hard task to create a reliable metalsemiconductor Schottky barrier. Some attempts have been made to overcome this problem by means of material oxidation [2] or deposition of insulators [3]. In this work we present a way to obtain an electrical rectification behaviour by means of heterojunction growth. Due to the big band gap differences among nitride semiconductors, it’s possible to create a structure with high band offsets. In InN/GaN heterojunctions, depending on the GaN doping, the magnitude of conduction and valence band offset are critical parameters which allow distinguishing among different electrical behaviours. The earliest estimate of the valence band offset at an InN–GaN heterojunction in a wurtzite structure was measured to be ~0.85 eV [4], while the Schottky barrier heights were determined to be ~ 1,4 eV [5].We grew In-face InN layer with varying thickness (between 150 nm and 1 mm) by plasma assisted molecular beam epitaxy (PA-MBE) on GaNntemplates (GaN/Al2O3), with temperatures ranging between 300°C and 450°C. The different doping in GaN template (Si doping, Fe doping and Mg doping) results in differences in band alignments of the two semiconductors changing electrical barriers for carriers and consequently electrical conduction behaviour. The processing of the devices includes metallization of the ohmic contacts on InN and GaN, for which we used Ti/Al/Ni/Au. Whereas an ohmic contact on InN is straightforward, the main issue was the fabrication of the contact on GaN due to the very low decomposition temperature of InN. A standard ohmic contact on GaN is generally obtained by high temperature rapid thermal annealing (RTA), typically done between 500ºC and 900ºC[6]. In this case, the limitation due to the presence of In-face InN imposes an upper limit on the temperature for the thermal annealing process and ohmic contact formation of about 450°C. We will present results on the morphology of the InN layers by X-Ray diffraction and SEM, and electrical measurements, in particular current-voltage and capacitance-voltage characteristics.

A fatigue damage model for seismic response of RC structures

Numerous damage models have been developed in order to analyze seismic behavior. Among the different possibilities existing in the literature, it is very clear that models developed along the lines of continuum damage mechanics are more consistent with the definition of damage as a phenomenon with mechanical consequences because they include explicitly the coupling between damage and mechanical behavior. On the other hand, for seismic processes, phenomena such as low cycle fatigue may have a pronounced effect on the overall behavior of the frames and, therefore, its consideration turns out to be very important. However, most of existing models evaluate the damage only as a function of the maximum amplitude of cyclic deformation without considering the number of cycles. In this paper, a generalization of the simplified model proposed by Cipollina et al. [Cipollina A, López-Hinojosa A, Flórez-López J. Comput Struct 1995;54:1113–26] is made in order to include the low cycle fatigue. Such a model employs in its formulation irreversible thermodynamics and internal state variable theory.

Critical Role of Two-Dimensional Island-Mediated Growth on the Formation of Semiconductor Heterointerfaces

We experimentally demonstrate a sigmoidal variation of the composition profile across semiconductor heterointerfaces. The wide range of material systems (III-arsenides, III-antimonides, III-V quaternary compounds, III-nitrides) exhibiting such a profile suggests a universal behavior. We show that sigmoidal profiles emerge from a simple model of cooperative growth mediated by twodimensional island formation, wherein cooperative effects are described by a specific functional dependence of the sticking coefficient on the surface coverage. Experimental results confirm that, except in the very early stages, island growth prevails over nucleation as the mechanism governing the interface development and ultimately determines the sigmoidal shape of the chemical profile in these two-dimensional grown layers. In agreement with our experimental findings, the model also predicts a minimum value of the interfacial width, with the minimum attainable value depending on the chemical identity of the species.

Modelization of low cycle fatigue damage in frames

Damage models based on the Continuum Damage Mechanics (CDM) include explicitly the coupling between damage and mechanical behavior and, therefore, are consistent with the definition of damage as a phenomenon with mechanical consequences. However, this kind of models is characterized by their complexity. Using the concept of lumped models, possible simplifications of the coupled models have been proposed in the literature to adapt them to the study of beams and frames. On the other hand, in most of these coupled models damage is associated only with the damage energy release rate which is shown to be the elastic strain energy. According to this, damage is a function of the maximum amplitude of cyclic deformation but does not depend on the number of cycles. Therefore, low cycle effects are not taking into account. From the simplified model proposed by Flórez-López, it is the purpose of this paper to present a formulation that allows to take into account the degradation produced not only by the peak values but also by the cumulative effects such as the low cycle fatigue. For it, the classical damage dissipative potential based on the concept of damage energy release rate is modified using a fatigue function in order to include cumulative effects. The fatigue function is determined through parameters such as the cumulative rotation and the total rotation and the number of cycles to failure. Those parameters can be measured or identified physically through the haracteristics of the RC. So the main advantage of the proposed model is the possibility of simulating the low cycle fatigue behavior without introducing parameters with no suitable physical meaning. The good performance of the proposed model is shown through a comparison between numerical and test results under cycling loading.