Chemistry of potassium halides and their role in corrosion in biomass and waste firing

Compared to the use of traditional fossil fuels (coal, oil, natural gas), combustion of biomass and waste fuels has several environmental and economic advantages for heat and power generation. However, biomass and waste fuels might contain halogens (Cl, Br, F), alkali metals (Na, K) and heavy metals (Zn, Pb), which may cause harmful emissions and corrosion problems. Hightemperature corrosion occurs typically on furnace waterwalls and superheaters. The corrosion of the boiler tube materials limits the increase of thermal efficiency of steam boilers and leads to costly shutdowns and repairs. In recent years, some concerns have been raised about halogen (Cl, Br, and F)-related hightemperature corrosion in biomass- and waste-fired boilers. Chlorine-related high-temperature corrosion has been studied extensively. The presence of alkali chlorides in the deposits is believed to play a major role in the corrosion observed in biomass and waste fired boilers. However, there is much less information found in literature on the corrosion effect of bromine and fluorine. According to the literature, bromine is only assumed to play a role similar to chlorine; the role of fluorine is even less understood. In this work, a series of bubbling fluidized bed (BFB) bench-scale tests were carried out to characterize the formation and sulfation behaviors of KCl and KBr in BFB combustion conditions. Furthermore, a series of laboratory tests were carried out to investigate the hightemperature corrosion behaviors of three different superheater steels (10CrMo9-10, AISI 347 and Sanicro 28) exposed to potassium halides in ambient air and wet air (containing 30% H2O). The influence of H2O and O2 on the high-temperature corrosion of steels both with and without a salt (KCl) in three gas atmospheres (2% H2O-30% O2-N2, 2% H2O-2% O2-N2 and 30% H2O-2% O2-N2) was also studied. From the bench-scale BFB combustion tests, it was found that HBr has a clearly higher affinity for the available K forming KBr than HCl forming KCl. The tests also indicated that KCl has a higher tendency for sulfation than KBr. From the laboratory corrosion tests in ambient air (also called “dry air” in Paper III and Paper IV), it was found that at relatively low temperatures (≤ 550 °C) the corrosivity of KBr and KF are similar to KCl. At 600 °C, KF showed much stronger corrosivity than KBr and KCl, especially for 10CrMo9-10 and AISI 347. When exposed to KBr or KF, 10CrMo9-10 was durable at least up to 450 °C, while AISI 347 and Sanicro 28 were durable at least up to 550 °C. From the laboratory corrosion tests in wet air (30% H2O), no obvious effect of water vapor was detected at 450 °C. At 550 °C, the influence of water vapor became significant in some cases, but the trend was not consistent. At 550 °C, after exposure with KBr, 10CrMo9-10 suffered from extreme corrosion; after exposure with KF and KCl, the corrosion was less severe, but still high. At 550 °C, local deep pitting corrosion occurred on AISI 347 and Sanicro 28 after exposure with KF. Some formation of K2CrO4 was observed in the oxide layer. At 550 °C, AISI 347 and Sanicro 28 suffered from low corrosion (oxide layer thickness of < 10 μm) after exposure with KBr and KCl. No formation of K2CrO4 was observed. Internal oxidation occurred in the cases of AISI 347 with KBr and KCl. From the laboratory corrosion tests in three different gas atmospheres (2% H2O-30% O2-N2, 2% H2O-2% O2-N2 and 30% H2O-2% O2-N2), it was found that in tests with no salt, no corrosion occurred on AISI 347 and Sanicro 28 up to 600 °C in both the “O2-rich” (2% H2O-30% O2-N2) and “H2O-rich” (30% H2O-2% O2-N2) gas atmospheres; only 10CrMo9-10 showed increased corrosion with increasing temperature. For 10CrMo9-10 in the “O2-rich” atmosphere, the presence of KCl significantly increased the corrosion compared to the “no salt” cases. For 10CrMo9-10 in the “H2O-rich” atmosphere, the presence or absence of KCl did not show any big influence on corrosion. The formation of K2CrO4 was observed only in the case with the “O2-rich” atmosphere. Considering both the results from the BFB tests and the laboratory corrosion tests, if fuels containing Br were to be combusted, the corrosion damage of superheaters would be expected to be higher than if the fuels contain only Cl. Information generated from these studies can be used to help the boiler manufacturers in selecting materials for the most demanding combustion systems.

Recurrent gallstone ileus: case report and literature review

The gallstone ileus is a rare complication of cholelithiasis and it represents the 1-4% of small intestinal mechanical obstruction. Gallstone is generally wedged in the terminal ileum, even if unusual locations have been described. The literature reports a very high morbidity and mortality, often because misdiagnosis or delayed diagnosis. There is no unique opinion in literature about the choice between one-stage and two-stage surgery. We report a clinical case that summarizes the diagnostic and therapeutic difficulties of gallstone ileus.

Giant cell tumor of tendon sheath: study of 64 cases and review of literature

The giant cell tumor of tendon sheath (GCTTS) is the most common benign neoplasm in the hand after the ganglion cyst. Several hypotheses were formulated about the etiological factors of these tumors, but still there is not a common opinion on etiology, prognostic factors and recurrence rate. This article presents a review of literature of the last 15 years about GCTTS to assess the demographic, clinical and histological profile. We compared the information obtained from literature with our experience of 64 cases between 2000 and 2012. Our study showed similar results to those reported in literature, except for the recurrence rate: only 3 cases (4.7%) of 64 patients reported recurrence (versus about 15% on average in literature). Among the various possible factors that predispose to recurrence, it is necessary that the surgeon ensures complete excision of the tumor and removal of any residual satellite nodules. Although the marginal excision is the treatment of choice, it is often difficult to perform due to for the location and the strict adherence of the tumor to the tendon or neurovascular bundles. We used in all cases a magnifying loupe to help a careful research of satellite lesions and to respect surrounding structures.

Proximate composition and mineral contents of pebbly fish, Alestes baremoze (Joannis, 1835) fillets in relation to fish size

Alestes baremoze (Joannis, 1835), locally known as Angara in Uganda, is native to fresh water systems in Africa, thriving well in both lacustrine and riverine conditions. It is part of the routine diets of families in northern Uganda, South Sudan, the Sudan and the Democratic Republic of Congo. The objective of this study was to determine the proximate composition and mineral contents of A. baremoze fillets according to fish size. The mineral contents of A. baremoze from Lake Albert were analysed using standard procedures. The fish samples were categorised into three size-groups; <1 kg (880–990g), 1-1.5 kg and 1.6-2.5 kg. On wet weight basis, there were no significant differences (p>0.05) in crude protein and ash content among the different fish sizes. However, there were significant differences (p<0.05) in crude fat, carbohydrate, gross energy and vitamin A. Crude fat (0.35%), carbohydrate (0.37%) and gross energy (597.6 Kcal/100 g) were significantly higher in medium sized fish (1 to 1.5 kg) compared with the larger fish category. Vitamin A contents of different fish sizes ranged from 55.1 to75.3 μg RAE/100g. The contents of magnesium and iron were highest in sizes <1 kg (5.34 mg/100 g) and (3.58 mg/100 g), respectively. It was observed that potassium content (339.33 mg/100 g) and calcium (29.75 mg/100 g) were significantly higher (p<0.05) in fish >1.5 kg. These findings suggest that taste, freshness and other related external appearances should not be the only factors to be considered in making choice for marketing and consumption of Alestes baremoze.

The Mary Carleton narratives, 1663-1673, a missing chapter in the history of the English novel,

The singular life and curious biographies of Mary Carleton.--The Carleton publications of 1663.--The minor publications of 1673.--"The counterfeit lady," a fiction.--The narrative technique of "The counterfeit lady."--The historical significance of "The counterfeit lady."--The current doctrine of the rise of the English novel.--Bibliographical difficulties.

Coupling of magnetic, strain and electric polarization fields in the structure of multiferroic material

The comprehensive study on the coupling of magnetism, electrical polarization and the crystalline lattice with the off-stoichiometric effects in self-doped multiferroic hexagonal h-LuMnxO3±δ (0.92≤x≤1.12) ceramic oxides was carried out for the PhD work. There is a complex coupling of the three ferroic degrees. The cancelation of the magnetic moments of ions in the antiferromagnetic order, electric polarization with specific vortex/antivortex topology and lattice properties have pushed researchers to find out ways to disclose the underlying physics and chemistry of magneto-electric and magneto-elastic couplings of h-RMnO3 multiferroic materials. In this research work, self-doping of Lu-sites or Mn-sites of h-LuMnxO3±δ ceramics prepared via solid state route was done to pave a way for deeper understanding of the antiferromagnetic transition, the weak ferromagnetism often reported in the same crystalline lattices and the ferroelectric properties coupled to the imposed lattice changes. Accordingly to the aim of the PhD thesis, the objectives set for the sintering study in the first chapter on experimental results were two. First, study of sintering off-stoichiometric samples within conditions reported in the bibliography and also extracted from the phase diagrams of the LuMnxO3±δ, with a multiple firings ending with a last high temperature step at 1300ºC for 24 hours. Second, explore longer annealing times of up to 240 hours at the fixed temperature of 1300 ºC in a search for improving the properties of the solid solution under study. All series of LuMnxO3±δ ceramics for each annealing time were characterized to tentatively build a framework enabling comparison of measured properties with results of others available in literature. XRD and Rietveld refinement of data give the evolution the lattice parameters as a function to x. Shrinkage of the lattice parameters with increasing x values was observed, the stability limit of the solid solution being determined by analysis of lattice parameters. The evolution of grain size and presence of secondary phases have been investigated by means of TEM, SEM, EDS and EBSD techniques. The dependencies of grain growth and regression of secondary phases on composition x and time were further characterized. Magnetic susceptibility of samples and magnetic irreversibility were extensively examined in the present work. The dependency of magnetic susceptibility, Neel ordering transition and important magnetic parameters are determined and compared to observation in other multiferroics in the following chapter of the thesis. As a tool of high sensitivity to detect minor traces of the secondary phase hausmannite, magnetic measurements are suggested for cross-checking of phase diagrams. Difficulty of previous studies on interpreting the magnetic anomaly below 43 K in h-RMnO3 oxides was discussed and assigned to the Mn3O4 phase, with supported of the electron microscopy. Magneto-electric coupling where AFM ordering is coupled to dielectric polarization is investigated as a function of x and of sintering condition via frequency and temperature dependent complex dielectric constant measurements in the final chapter of the thesis. Within the limits of solid solubility, the crystalline lattice of off-stoichiometric ceramics was shown to preserve the magneto-electric coupling at TN. It represents the first research work on magneto-electric coupling modified by vacancy doping to author’s knowledge. Studied lattices would reveal distortions at the atomic scale imposed by local changes of x dependent on sintering conditions which were widely inspected by using TEM/STEM methods, complemented with EDS and EELS spectroscopy all together to provide comprehensive information on cross coupling of distortions, inhomogeneity and electronic structure assembled and discussed in a specific chapter. Internal interfaces inside crystalline grains were examined. Qualitative explanations of the measured magnetic and ferroelectric properties were established in relation to observed nanoscale features of h-LuMnxO3±δ ceramics. Ferroelectric domains and topological defects are displayed both in TEM and AFM/PFM images, the later technique being used to look at size, distribution and switching of ferroelectric domains influenced by vacancy doping at the micron scale bridging to complementary TEM studies on the atomic structure of ferroelectric domains. In support to experimental study, DFT simulations using Wien2K code have been carried out in order to interpret the results of EELS spectra of O K-edge and to obtain information on the cation hybridization to oxygen ions. The L3,2 edges of Mn is used to access the oxidation state of the Mn ions inside crystalline grains. In addition, rehybridization driven ferroelectricity is also evaluated by comparing the partial density of states of the orbitals of all ions of the samples, also the polarization was calculated and correlated to the off-stoichiometric effect.

Development of computer application for determination of chemical diffusion properties in biological tissues

The main objective of this work was to develop an application capable of determining the diffusion times and diffusion coefficients of optical clearing agents and water inside a known type of muscle. Different types of chemical agents can also be used with the method implemented, such as medications or metabolic products. Since the diffusion times can be calculated, it is possible to describe the dehydration mechanism that occurs in the muscle. The calculation of the diffusion time of an optical clearing agent allows to characterize the refractive index matching mechanism of optical clearing. By using both the diffusion times and diffusion of water and clearing agents not only the optical clearing mechanisms are characterized, but also information about optical clearing effect duration and magnitude is obtained. Such information is crucial to plan a clinical intervention in cooperation with optical clearing. The experimental method and equations implemented in the developed application are described in throughout this document, demonstrating its effectiveness. The application was developed in MATLAB code, but the method was personalized so it better fits the application needs. This process significantly improved the processing efficiency, reduced the time to obtain he results, multiple validations prevents common errors and some extra functionalities were added such as saving application progress or export information in different formats. Tests were made using glucose measurements in muscle. Some of the data, for testing purposes, was also intentionally changed in order to obtain different simulations and results from the application. The entire project was validated by comparing the calculated results with the ones found in literature, which are also described in this document.

Up-Link/Down-Link capacity Unbalance analysis in UMTS using a GIS based Planning Tool and MATLAB simulation

Capacity analysis using simulation is not a new thing in literature. Most of the development process of UMTS standardization have used simulation tools; however, we thing that the use of GIS planning tools and matrix manipulation capacity of MATLAB can show us different scenarios and make a more realistic analysis. Some work is been doing in COST 273 in order to have more realistic scenarios for UMTS planning. Our work initially was centered in uplink analysis, but we are now working in downlink analysis, specifically in two areas: capacity in number of users for RT and NRT services, and Node B power. In this work we will show results for up-link capacity and some results for downlink capacity and BS power consumption.

Changes in catches and biological characteristics of Nile tilapia (Oreochromis niloticus Linnaeus) in Lake Wamala (Uganda) under changing climatic conditions

There have been changes in catches and biological characteristics of the Nile Tilapia, Oreochromis niloticus (Linnaeus) in Lake Wamala (Uganda) since its introduction and establishment, but the factors which have contributed to these changes are not adequately understood. This study examined changes in catches and biological characteristics of Nile tilapia in relation to changes in temperature, rainfall and lake depth to provide an understanding of the role of changing climatic conditions. There was an increase in minimum, maximum and average temperature since 1980, but only minimum (0.021ºCyr-1) and average (0.018ºCyr-1) showed a significant trend (p < 0.05). Rainfall increased by 8.25 mmyr-1 since 1950 and accounted for 79.5% of the water input into the lake while evaporation accounted for 86.2% of the water loss from the lake. The lake depth was above 4 m during the years rainfall was above normal average of 1180 mm, except during the period 2011-2014. The contribution of Nile tilapia to total catch and CPUE changed with rainfall and lake depth up to 2000, after which they decreased despite increase in rainfall. There was a strong positive correlation between lake depth and average total length of Nile tilapia (r = 0.991, p < 0.001) and length at 50% maturity (r = 0.726, p < 0.001). The length-weight allometry between high and low lake depths was significantly different [t (6) = 3.225, p < 0.05], with Nile tilapia being heavier (for a given length) at high lake depth than at low lake depth. Fecundity of Nile tilapia was higher and egg diameter lower than what is reported in literature. Nile tilapia shifted from algal dominated diet during the wet season to include more insects during the dry season. The study showed that the catches and biological characteristics of Nile tilapia change with climate and hydrological factors and these need to be considered in management of the fisheries of Lake Wamala.

An investigation of the clinical utility of preoperative cardiopulmonary exercise testing in patients undergoing major pancreatic surgery

Pancreaticoduodenectomy with or without adjuvant chemotherapy remains the only modality of possible cure in patients with cancer involving the head of the pancreas and the periampullary region. While mortality rates after pancreaticoduodenectomy have improved considerably over the course of the last century, morbidity remains high. Patient selection is of paramount importance in ensuring that major surgery is offered to individuals who will most benefit from a pancreaticoduodenectomy. Moreover, identifying preoperative risk factors provides potential targets for prehabilitation and optimisation of the patient's physiology before undertaking surgery. In addition to this, early identification of patients who are likely to develop postoperative complications allows for better allocation of critical care resources and more aggressive management high risk patients. Cardiopulmonary exercise testing is becoming an increasingly popular tool in the preoperative risk assessment of the surgical patient. However, very little work has been done to investigate the role of cardiopulmonary exercise testing in predicting complications after pancreaticoduodenectomy. The impact of jaundice, systemic inflammation and other preoperative clinicopathological characteristics on cardiopulmonary exercise physiology has not been studied in detail before in this cohort of patients. The overall aim of the thesis was to examine the relationships between preoperative clinico-pathological characteristics including cardiopulmonary exercise physiology, obstructive jaundice, body composition and systemic inflammation and complications and the post-surgical systemic inflammatory response in patients undergoing pancreaticoduodenectomy. Chapter 1 reviews the existing literature on preoperative cardiopulmonary exercise testing, the impact of obstructive jaundice, perioperative systemic inflammation and the importance of body composition in determining outcomes in patients undergoing major surgery with particular reference to pancreatic surgery. Chapter 2 reports on the role of cardiopulmonary exercise testing in predicting postoperative complications after pancreaticoduodenectomy. The results demonstrate that patients with V˙O2AT less than 10 ml/kg/min are more likely to develop a postoperative pancreatic fistula, stay longer in hospital and less likely to receive adjuvant therapy. These results emphasise the importance of aerobic fitness to recover from the operative stress of major surgery without significant morbidity. Cardiopulmonary exercise testing may prove useful in selecting patients for intensive prehabilitation programmes as well as for other optimisation measures to prepare them for major surgery. Chapter 3 evaluates the relationship between cardiopulmonary exercise physiology and other clinicopathological characteristics of the patient. A detailed analysis of cardiopulmonary exercise test parameters in jaundiced versus non-jaundiced patients demonstrates that obstructive jaundice does not impair cardiopulmonary exercise physiology. This further supports emerging evidence in contemporary literature that jaundiced patients can proceed directly to surgery without preoperative biliary drainage. The results of this study also show an interesting inverse relationship between body mass index and anaerobic threshold which is analysed in more detail in Chapter 4. Chapter 4 examines the relationship between preoperative cardiopulmonary exercise physiology and body composition in depth. All parameters measured at cardiopulmonary exercise test are compared against body composition and body mass index. The results of this chapter report that the current method of reporting V˙O2, both at peak exercise and anaerobic threshold, is biased against obese subjects and advises caution in the interpretation of cardiopulmonary exercise test results in patients with a high BMI. This is particularly important as current evidence in literature suggests that postoperative outcomes in obese subjects are comparable to non-obese subjects while cardiopulmonary exercise test results are also abnormally low in this very same cohort of patients. Chapter 5 analyses the relationship between preoperative clinico-pathological characteristics including systemic inflammation and the magnitude of the postoperative systemic inflammatory response. Obstructive jaundice appears to have an immunosuppressive effect while elevated preoperative CRP and hypoalbuminemia appear to have opposite effects with hypoalbuminemia resulting in a lower response while elevated CRP in the absence of hypoalbuminemia resulted in a greater postoperative systemic inflammatory response. Chapter 6 evaluates the role of the early postoperative systemic inflammatory response in predicting complications after pancreaticoduodenectomy and aims to establish clinically relevant thresholds for C-Reactive Protein for the prediction of complications. The results of this chapter demonstrate that CRP levels as early as the second postoperative day are associated with complications. While post-operative CRP was useful in the prediction of infective complications, this was the case only in patients who did not develop a post-operative pancreatic fistula. The predictive ability of inflammatory markers for infectious complications was blunted in patients with a pancreatic fistula. Chapter 7 summarises the findings of this thesis, their place in current literature and future directions. The results of this thesis add to the current knowledge regarding the complex pathophysiological abnormalities in patients undergoing pancreaticoduodenectomy, with specific emphasis on the interaction between cardiopulmonary exercise physiology, obstructive jaundice, systemic inflammation and postoperative outcomes. The work presented in this thesis lays the foundations for further studies aimed at improving outcomes after pancreaticoduodenectomy through the development of individualised, goal-directed therapies that are initiated well before this morbid yet necessary operation is performed.

Identification, diversity and distribution patterns of fish larvae in Khark & Kharko Coralline Islands ecosystem – Persian Gulf, by GIS method

Khark & Kharko Islands are the last Northern point for fringing coral reefs in Iranian side of the Persian Gulf. These Coralline habitats are the Protected Area and Wildlife Refugees with the total area of 2400 ha which located in the territory of Bushehr Province. This research carried out during 2006-2007 with monthly sampling from 12 stations, which selected around Islands and inshore waters with maximum depth of 20 meter. Sampling was conducted using by Bongo-Net plankton sampler with 500μ of mesh size. Totally, 1808 specimen from 45 family fish larvae was identified in studied area, including: 21 coralline fish larva families and 24 shore fish larvae such as pelagic and demersal fishes which some of them known as indicator, sentinel or endemic species for coral reef ecosystems. The results was shown that coral reef diversity in coral reefs (Khark & Kharko Islands) is more than other habitats such as estuary and river mouth, creeks, mangrove forest sites, and off shore water of the Persian Gulf and Oman Sea Iranian side. Among Identified families, Clupeidae, Blenniidae, Sillaginidae, Atherinidae and Tripterygiidae; with more abundance were dominant families in studied area. The pick of fish larvae abundance family were estimated in spring. There were significant differences between seasonally abundance and sub areas, but there were not significant differences in diversity indexes between Khark and Kharko stations with coastal stations (p< 0.05). The mean abundance of fish larvae were estimated 18.7083 larvae under 10m² of sea surface, and the mean diversity indexes and evenness were estimated 0.7135 and 0.565342 consequently, that was showed the area is under ecological stress for fish larvae, and wasn’t stable. Therefore, from the ecological point of view, only some of the fish larvae groups as like Clupeidae were dominant. Thus, they were the main cause of the fish larvae abundance change in studied area. Due to geographical location of Khark and Kharko Islands and among the environmental parameters, Its seems that the condition of sea current is the main cause for present or absent and distribution patterns of fish larvae in area. Abundance of fish larvae in west of Islands was higher than eastern parts in the spring. But this condition will be reversed in eastern part of Island and several coastal stations, so that the Islands surrounding clock wise current to cause fish larvae distribution patterns.

A "Greater Britain": colonial kin in fictions of settlement, 1850-1890

This dissertation traces the ways in which nineteenth-century fictional narratives of white settlement represent “family” as, on the one hand, an abstract theoretical model for a unified and relatively homogenous British settler empire and on the other, a fundamental challenge to ideas about imperial integrity and transnational Anglo-Saxon racial identification. I argue that representations of transoceanic white families in nineteenth-century fictions about Australian settler colonialism negotiate the tension between the bounded domesticity of an insular English nation and the kind of kinship that spans oceans and continents as a result of mass emigration from the British isles to the United States, Canada, New Zealand, and the Australian colonies. As such, these fictions construct productive analogies between the familial metaphors and affective language in the political discourse of “Greater Britain”—-a transoceanic imagined community of British settler colonies and their “mother country” united by race and language—-and ideas of family, gender, and domesticity as they operate within specific bourgeois families. Concerns over the disruption of transoceanic families bear testament to contradictions between the idea of a unified imperial identity (both British and Anglo-Saxon), the proliferation of fractured local identities (such as settlers’ English, Irish Catholic, and Australian nationalisms), and the conspicuous absence of indigenous families from narratives of settlement. I intervene at the intersection of postcolonial literary criticism and gender theory by examining the strategic deployments of heteronormative kinship metaphors and metonymies in the rhetorical consolidation of settler colonial space. Settler colonialism was distinct from the “civilizing” domination of subject peoples in South Asia in that it depended on the rhetorical construction of colonial territory as empty space or as land occupied by nearly extinct “primitive” races. This dissertation argues that political rhetoric, travel narratives, and fiction used the image of white female bourgeois reproductive power and sentimental attachment as a technology for settler colonial success, embodying this technology both in the benevolent figure of the metropolitan “mother country” (the paternalistic female counter to the material realities of patriarchal and violent settler colonial practices) and in fictional juxtapositions of happy white settler fecund families with the solitary self-extinguishing figure of the black aboriginal “savage.” Yet even in the narratives where the continuity and coherence of families across imperial space is questioned—-and “Greater Britain” itself—-domesticity and heteronormative familial relations effectively rewrite settler space as white, Anglo-Saxon and bourgeois, and the sentimentalism of troubled European families masks the presence and genocide of indigenous aboriginal peoples. I analyze a range of novels and political texts, canonical and non-canonical, metropolitan and colonial. My introductory first chapter examines the discourse on a “Greater Britain” in the travel narratives of J.A. Froude, Charles Wentworth Dilke, and Anthony Trollope and in the Oxbridge lectures of Herman Merivale and J.R. Seeley. These writers make arguments for an imperial economy of affect circulating between Britain and the settler colonies that reinforces political connections, and at times surpasses the limits of political possibility by relying on the language of sentiment and feeling to build a transoceanic “Greater British” community. Subsequent chapters show how metropolitan and colonial fiction writers, including Charles Dickens, Anthony Trollope, Marcus Clarke, Henry Kingsley, and Catherine Helen Spence, test the viability of this “Greater British” economy of affect by presenting transoceanic family connections and structures straining under the weight of forces including the vast distances between colonies and the “mother country,” settler violence, and the transportation system.

Solid-liquid interactions in microscale structures and devices

Liquid-solid interactions become important as dimensions approach mciro/nano-scale. This dissertation focuses on liquid-solid interactions in two distinct applications: capillary driven self-assembly of thin foils into 3D structures, and droplet wetting of hydrophobic micropatterned surfaces. The phenomenon of self-assembly of complex structures is common in biological systems. Examples include self-assembly of proteins into macromolecular structures and self-assembly of lipid bilayer membranes. The principles governing this phenomenon have been applied to induce self-assembly of millimeter scale Si thin films into spherical and other 3D structures, which are then integrated into light-trapping photovoltaic (PV) devices. Motivated by this application, we present a generalized analytical study of the self-folding of thin plates into deterministic 3D shapes, through fluid-solid interactions, to be used as PV devices. This study consists of developing a model using beam theory, which incorporates the two competing components — a capillary force that promotes folding and the bending rigidity of the foil that resists folding into a 3D structure. Through an equivalence argument of thin foils of different geometry, an effective folding parameter, which uniquely characterizes the driving force for folding, has been identified. A criterion for spontaneous folding of an arbitrarily shaped 2D foil, based on the effective folding parameter, is thus established. Measurements from experiments using different materials and predictions from the model match well, validating the assumptions used in the analysis. As an alternative to the mechanics model approach, the minimization of the total free energy is employed to investigate the interactions between a fluid droplet and a flexible thin film. A 2D energy functional is proposed, comprising the surface energy of the fluid, bending energy of the thin film and gravitational energy of the fluid. Through simulations with Surface Evolver, the shapes of the droplet and the thin film at equilibrium are obtained. A critical thin film length necessary for complete enclosure of the fluid droplet, and hence successful self-assembly into a PV device, is determined and compared with the experimental results and mechanics model predictions. The results from the modeling and energy approaches and the experiments are all consistent. Superhydrophobic surfaces, which have unique properties including self-cleaning and water repelling are desired in many applications. One excellent example in nature is the lotus leaf. To fabricate these surfaces, well designed micro/nano- surface structures are often employed. In this research, we fabricate superhydrophobic micropatterned Polydimethylsiloxane (PDMS) surfaces composed of micropillars of various sizes and arrangements by means of soft lithography. Both anisotropic surfaces, consisting of parallel grooves and cylindrical pillars in rectangular lattices, and isotropic surfaces, consisting of cylindrical pillars in square and hexagonal lattices, are considered. A novel technique is proposed to image the contact line (CL) of the droplet on the hydrophobic surface. This technique provides a new approach to distinguish between partial and complete wetting. The contact area between droplet and microtextured surface is then measured for a droplet in the Cassie state, which is a state of partial wetting. The results show that although the droplet is in the Cassie state, the contact area does not necessarily follow Cassie model predictions. Moreover, the CL is not circular, and is affected by the micropatterns, in both isotropic and anisotropic cases. Thus, it is suggested that along with the contact angle — the typical parameter reported in literature quantifying wetting, the size and shape of the contact area should also be presented. This technique is employed to investigate the evolution of the CL on a hydrophobic micropatterned surface in the cases of: a single droplet impacting the micropatterned surface, two droplets coalescing on micropillars, and a receding droplet resting on the micropatterned surface. Another parameter which quantifies hydrophobicity is the contact angle hysteresis (CAH), which indicates the resistance of the surface to the sliding of a droplet with a given volume. The conventional methods of using advancing and receding angles or tilting stage to measure the resistance of the micropatterned surface are indirect, without mentioning the inaccuracy due to the discrete and stepwise motion of the CL on micropillars. A micronewton force sensor is utilized to directly measure the resisting force by dragging a droplet on a microtextured surface. Together with the proposed imaging technique, the evolution of the CL during sliding is also explored. It is found that, at the onset of sliding, the CL behaves as a linear elastic solid with a constant stiffness. Afterwards, the force first increases and then decreases and reaches a steady state, accompanied with periodic oscillations due to regular pinning and depinning of the CL. Both the maximum and steady state forces are primarily dependent on area fractions of the micropatterned surfaces in our experiment. The resisting force is found to be proportional to the number of pillars which pin the CL at the trailing edge, validating the assumption that the resistance mainly arises from the CL pinning at the trailing edge. In each pinning-and-depinning cycle during the steady state, the CL also shows linear elastic behavior but with a lower stiffness. The force variation and energy dissipation involved can also be determined. This novel method of measuring the resistance of the micropatterned surface elucidates the dependence on CL pinning and provides more insight into the mechanisms of CAH.

Using an end-of-life care pathway in acute stroke: a mixed methods study of decision-making and care experiences

Background: The evidence base on end-of-life care in acute stroke is limited, particularly with regard to recognising dying and related decision-making. There is also limited evidence to support the use of end-of-life care pathways (standardised care plans) for patients who are dying after stroke. Aim: This study aimed to explore the clinical decision-making involved in placing patients on an end-of-life care pathway, evaluate predictors of care pathway use, and investigate the role of families in decision-making. The study also aimed to examine experiences of end-of-life care pathway use for stroke patients, their relatives and the multi-disciplinary health care team. Methods: A mixed methods design was adopted. Data were collected in four Scottish acute stroke units. Case-notes were identified prospectively from 100 consecutive stroke deaths and reviewed. Multivariate analysis was performed on case-note data. Semi-structured interviews were conducted with 17 relatives of stroke decedents and 23 healthcare professionals, using a modified grounded theory approach to collect and analyse data. The VOICES survey tool was also administered to the bereaved relatives and data were analysed using descriptive statistics and thematic analysis of free-text responses. Results: Relatives often played an important role in influencing aspects of end-of-life care, including decisions to use an end-of-life care pathway. Some relatives experienced enduring distress with their perceived responsibility for care decisions. Relatives felt unprepared for and were distressed by prolonged dying processes, which were often associated with severe dysphagia. Pro-active information-giving by staff was reported as supportive by relatives. Healthcare professionals generally avoided discussing place of care with families. Decisions to use an end-of-life care pathway were not predicted by patients’ demographic characteristics; decisions were generally made in consultation with families and the extended health care team, and were made within regular working hours. Conclusion: Distressing stroke-related issues were more prominent in participants’ accounts than concerns with the end-of-life care pathway used. Relatives sometimes perceived themselves as responsible for important clinical decisions. Witnessing prolonged dying processes was difficult for healthcare professionals and families, particularly in relation to the management of persistent major swallowing difficulties.

Degradation of compounds present in cork boiling water by gamma radiation

Cork boiling water is an aqueous and complex dark liquor with high concentration of phenolic compounds such as phenolic acids and tannins [1, 2], which are considered biorecalcitrants [2]. Ionizing radiation has been widely studied as an alternative technology for the degradation of organic contaminants without the addition of any other (e.g.: Fenton technologies). The aim of this work was to identify the compounds present in cork boiling water and further evaluate the resulting stable degradation products after gamma irradiation. The irradiation experiments of standard solutions were carried out at room temperature using a Co-60 experimental equipment. The applied absorbed doses were 20 and 50 kGy at a dose rate of 1.5 kGy/h, determined by routine dosimeters [3]. The identification of radiolytic products was carried out by HPLC-DAD-ESI/MS. The phenolic compounds were identified by comparing their retention times and UV–vis and mass spectra with those obtained from standard compounds, when available, as well as by comparing the obtained information with available data reported in the literature. Concerning the obtained results and the literature review, the main cork wastewater components are: quinic, gallic, protocatechuic, vanillic, syringic and ellagic acids. Based on this, we used protocatechuic, vanillic and syringic acids as model compounds to study their degradation by gamma radiation in order to identify the corresponding radiolytic products. Standard aqueous solutions were irradiated and the derivatives of each model compound are represented in figure 1. The obtained results seem to demonstrate that the derivatives of the parent compounds could also be phenolic acids, since it was observed the loss of 44 u (CO2) from the [M-H]- ions. Gallic and protocatechuic acids are identified as derivatives of vanillic and syringic acids, and gallic acid as a protocatechuic acid derivative. Compound 5 ([M-H]- at m/z 169) was tentatively identified as 2,4,6-trihydroxybenzoic acid, since its fragmentation pattern (m/z 151, 125 and 107) is similar to that previously reported in literature [4]. The structure of compound 7 was proposed based on the molecular ion and its fragmentation and compound 6 remains unknown.