966 resultados para Falha de equipamento


Relevância:

10.00% 10.00%

Publicador:

Resumo:

The oily sludge is a complex mix of hydrocarbons, organic impurities, inorganic and water. One of the major problems currently found in petroleum industry is management (packaging, storage, transport and fate) of waste. The nanomaterials (catalysts) mesoporous and microporous are considered promising for refining and adsorbents process for environment protection. The aim of this work was to study the oily sludge from primary processing (raw and treated) and vacuum residue, with application of thermal analyses technique (pyrolysis), thermal and catalytic pyrolysis with nanomaterials, aiming at production petroleum derived. The sludge and vacuum residue were analyzed using a soxhlet extraction system, elemental analysis, thin layer chromatography, thermogravimetry and pyrolysis coupled in gas chromatography/mass spectrometry (Py GC MS). The catalysts AlMCM-41, AlSBA-15.1 e AlSBA-15.2 were synthesized with molar ratio silicon aluminum of 50 (Si/Al = 50), using tetraethylorthosilicante as source of silicon and pseudobuhemita (AlOOH) as source of aluminum. The analyzes of the catalysts indicate that materials showed hexagonal structure and surface area (783,6 m2/g for AlMCM-41, 600 m2/g for AlSBA-15.1, 377 m2/g for AlSBA-15.2). The extracted oily sludge showed a range 65 to 95% for organic components (oil), 5 to 35% for inorganic components (salts and oxides) and compositions different of derivatives. The AlSBA-15 catalysts showed better performance in analyzes for production petroleum derived, 20% increase in production of kerosene and light gas oil. The energy potential of sludge was high and it can be used as fuel in other cargo processed in refinery

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Since the beginning of the National Program for Production and Use of Biodiesel in Brazil, in 2004, different raw materials were evaluated for biodiesel production, trying to combine the agricultural diversity of the country to the desire to reduce production coasts. To determine the chemical composition of biodiesel produced from common vegetables oils, international methods have been used widely in Brazil. However, for analyzing biodiesel samples produced from some alternative raw materials analytical problems have been detected. That was the case of biodiesel from castor oil. Due the need to overcome these problems, new methodologies were developed using different chromatographic columns, standards and quantitative methods. The priority was simplifying the equipment configuration, realizing faster analyses, reducing the costs and facilitating the routine of biodiesel research and production laboratories. For quantifying free glycerin, the ethylene glycol was used in instead of 1,2,4-butanetriol, without loss of quality results. The ethylene glycol is a cheaper and easier standard. For methanol analyses the headspace was not used and the cost of the equipment used was lower. A detailed determination of the esters helped the deeper knowledge of the biodiesel composition. The report of the experiments and conclusions of the research that resulted in the development of alternative methods for quality control of the composition of the biodiesel produced in Brazil, a country with considerable variability of species in agriculture, are the goals of this thesis and are reported in the following pages

Relevância:

10.00% 10.00%

Publicador:

Resumo:

A self-flotator vibrational prototype electromechanical drive for treatment of oil and water emulsion or like emulsion is presented and evaluated. Oil production and refining to obtain derivatives is carried out under arrangements technically referred to as on-shore and off-shore, ie, on the continent and in the sea. In Brazil 80 % of the petroleum production is taken at sea and area of deployment and it cost scale are worrisome. It is associated, oily water production on a large scale, carrier 95% of the potential pollutant of activity whose final destination is the environment medium, terrestrial or maritime. Although diversified set of techniques and water treatment systems are in use or research, we propose an innovative system that operates in a sustainable way without chemical additives, for the good of the ecosystem. Labyrinth adsor-bent is used in metal spirals, and laboratory scale flow. Equipment and process patents are claimed. Treatments were performed at different flow rates and bands often monitored with control systems, some built, other bought for this purpose. Measurements of the levels of oil and grease (OGC) of efluents treaty remained within the range of legal framework under test conditions. Adsorbents were weighed before and after treatment for obtaining oil impregna-tion, the performance goal of vibratory action and treatment as a whole. Treatment technolo-gies in course are referenced, to compare performance, qualitatively and quantitatively. The vibration energy consumption is faced with and without conventional flotation and self-flotation. There are good prospects for the proposed, especially in reducing the residence time, by capillary action system. The impregnation dimensionless parameter was created and confronted with consecrated dimensionless parameters, on the vibrational version, such as Weber number and Froude number in quadratic form, referred to as vibrational criticality. Re-sults suggest limits to the vibration intensity

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The relation between metabolic demand and maximal oxygen consumption during exercise have been investigated in different areas of knowledge. In the health field, the determination of maximal oxygen consumption (VO2max) is considered a method to classify the level of physical fitness or the risk of cardiocirculatory diseases. The accuracy to obtain data provides a better evaluation of functional responses and allows a reduction in the error margin at the moment of risk classification, as well as, at the moment of determination of aerobic exercise work load. In Brasil, the use of respirometry associated to ergometric test became an opition in the cardiorespiratory evaluation. This equipment allows predictions concerning the oxyredutase process, making it possible to identify physiological responses to physical effort as the respiratory threshold. This thesis focused in the development of mathematical models developed by multiple regression validated by the stepwise method, aiming to predict the VO2max based on respiratory responses to physical effort. The sample was composed of a ramdom sample of 181 healthy individuals, men and women, that were randomized to two groups: regression group and cross validation group (GV). The voluntiars were submitted to a incremental treadmill test; objetiving to determinate of the second respiratory threshold (LVII) and the Peak VO2max. Using the método forward addition method 11 models of VO2max prediction in trendmill were developded. No significative differences were found between the VO2max meansured and the predicted by models when they were compared using ANOVA One-Way and the Post Hoc test of Turkey. We concluded that the developed mathematical models allow a prediction of the VO2max of healthy young individuals based on the LVII

Relevância:

10.00% 10.00%

Publicador:

Resumo:

OBJECTIVE: Evaluating the kit-Bh performance in carrying out of breast biopsies. METHODS: They were randomly selected a sample of 30 patients with breast cancer undergoing mastectomy, based on the results of a pilot study from February 2008 to April 2010. They were excluded women with had not palpable, stone-hard consistency tumors, previous surgical manipulation or that contains liquid. Using the helicoid biopsy Kit (kit Bh) and an equipment Core biopsy with cannula and needle and 14 gauge respectively, it was collected a fragment of sound equipment in the area and in tumors in each specimen, totaling 120 fragments for histological study. For data analysis, it was defined a 95% confidence level and used the SPSS-13 version, the Kappa index and the parametric Student t test. RESULTS: Mean age of patients was 51.6 years (± 11.1 years). The infiltrating ductal carcinoma showed a higher incidence, 26 cases (86.7%). The Core biopsy had a sensitivity of 93.3%, specificity of 100% and accuracy 96.7%, while the helicoid biopsy had a sensitivity of 96.7%, specificity of 100% and accuracy 98.3%. By comparing the histology of tumors and the fragments of biopsies, there was high degree of agreement in diagnoses (kappa of 0.93 with p <0.05) CONCLUSION: Both devices provided the histological diagnosis of lesions with high accuracy. Results of this study showed that the helicoid biopsy is a reliable alternative in 22 the preoperative diagnosis of breast lesions. Further studies in vivo better will define the role of Kit Bh in the diagnosis of these lesions

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Avaliaram-se os possíveis mecanismos envolvidos com a falha na desova de matrinxãs (Brycon amazonicus), submetidas à indução hormonal por extrato bruto de hipófise de carpa. Para tal, após a extrusão, os ovários foram coletados e analisados histomorfometricamente. Nas fêmeas que não desovaram (FNDs), a maioria dos ovócitos vitelogênicos remanescentes nos ovários atingiu a maturação final, apresentando quebra de vesícula germinativa, mas não foram ovulados (NOs). Consequentemente, estas fêmeas apresentaram frequências mais baixas de folículos pós ovulatórios (5%) quando comparadas com a que desovou (FD) (23%). Com relação aos NOs, os valores se inverteram e a frequência destes nas FNDs (21%) foi maior do que na FD (3%). Estes dados indicam que as falhas na desova desta espécie estão provavelmente relacionadas com a ovulação, uma vez que a maturação final dos ovócitos ocorre de forma similar tanto nas FNDs como na FD. Os dados sugerem que as substâncias que promovem a ovulação, como as prostaglandinas, podem aumentar o sucesso de desova em peixes reofílicos.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The aim of the present study was to identify the representational elements of workrelated accidents in the health field, as well as investigate their most frequent occurrences at a university hospital, seeking to understand the cognitive, affective and social elements subjacent to the work process involved in health. The analysis focused on 470 middle and senior support staff of this hospital, based on the theoretical-methodological support of the Social Representations Theory. A combination of the following instruments was used for data collection: a free wordassociation test, a questionnaire, an interview and a field journal. Evoc 2000 software was used to identify representational structure. Chi-square and Mann-Whitney tests, at a significance level of 5%, were performed to verify the association between the independent variables and the occurrence of work accidents. In addition, thematic content analysis and lexicographic analysis by ALCESTE software program were used to understand textual content. It was observed that social representations of work-related accidents in the health area are centered in the contamination category, while the categories of prevention and professional unpreparedness are found peripherally. There was a significant association between the existence of multiple employment, the use of personal protective equipment (PPI) during work, job satisfaction and the occurrence of work accidents. The conclusions indicate that perforating-cutting occupational accidents predominated in the hospital and that the representations of the subjects intertwined, with a traditional discourse of work accidents strongly present in Occupational Health. It is therefore suggested that certain subjective aspects related to culture, in terms of controlling work accidents, such as: management, process, organization and the increasing precariousness

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Este trabalho foi realizado no Centro de Cana IAC, Ribeirão Preto, com o objetivo de avaliar a eficácia do óleo fúsel isolado e em mistura com glifosato, aplicado na pós-emergência tardia de plantas daninhas de uma comunidade natural. O delineamento experimental foi em blocos casualizados (DBC), com 13 tratamentos em quatro repetições, sendo 52 parcelas de 3 x 3 m cada. A aplicação dos tratamentos foi realizada em 22/3/2006, com equipamento costal pressurizado munido de barra com quatro pontas de pulverização Teejet 110.02 TT, regulado para volume de calda de 212 L ha-1. Avaliaram-se a porcentagem de controle aos 14, 21, 28, 35 e 42 dias após a aplicação do tratamento (DAA) e a massa seca, aos 42 DAA. Para a maioria dos tratamentos somente não houve 100% de controle devido à presença de plantas daninhas dos gêneros Commelina e Cyperus spp., que, mesmo com partes amareladas, foram mais tolerantes à aplicação dos produtos. O controle obtido com óleo fúsel aplicado isoladamente não ultrapassou 20%, aos 42 DAA.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

O cancro cítrico, causado pela bactéria Xanthomonas axonopodis pv. citri Valterin et alii 1995, é uma doença conhecida mundialmente e sempre constituiu séria ameaça para a citricultura brasileira. O objetivo do presente trabalho foi analisar as condições climáticas do Estado de São Paulo e desenvolver mapas de zonas de maior risco de epidemias de cancro cítrico. Foram utilizados dados meteorológicos referentes aos anos de 2002 a 2005, os quais foram baseados no modelo de previsão desenvolvido por Campbell & Madden (4) e Hau & Kranz (10). A freqüência dos dados foi horária e quando alguma estação apresentava falha, esses eram extrapolados da estação mais próxima. Foram contabilizados os índices de favorabilidade e posteriormente calculadas as porcentagens de dias favoráveis à ocorrência da doença no período de um ano. A partir destas informações, foram gerados os mapas temáticos do Estado de São Paulo, com a distribuição espacial da porcentagem de dias favoráveis à ocorrência de cancro cítrico. A região Noroeste do Estado foi a que apresentou a maior porcentagem de dias favoráveis à ocorrência de cancro cítrico.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Os objetivos deste trabalho foram estudar as relações solo-paisagem em uma litosseqüência de transição arenito-basalto e verificar a similaridade dos limites de superfícies geomórficas mapeados no campo com os limites mapeados a partir de técnicas geoestatísticas. Foi realizado o mapeamento de uma área de 530 ha, utilizando-se equipamento de GPS, e em seguida elaborou-se o Modelo de Elevação Digital, que possibilitou o estabelecimento da transeção de 2.100 m a partir do topo. Ao longo da transeção, o terreno foi estaqueado a intervalos regulares de 50 m, nos quais foram realizadas medidas da altitude para confecção do perfil altimétrico. As superfícies geomórficas foram identificadas e delimitadas conforme critérios topográficos e estratigráficos, com base em intensas investigações de campo. Coletaram-se amostras de solo em pontos laterais em 67 locais, nas superfícies geomórficas identificadas, nas profundidades de 0,0-0,25 m e 0,80-1,00 m. Além disso, foram abertas trincheiras nos segmentos de vertente inseridos nas superfícies geomórficas mapeadas. As amostras coletadas foram analisadas quanto a densidade do solo, textura, Ca2+, K+, Mg2+, SB, CTC, V, pH (água e KCl), SiO2, Al2O3 e Fe2O3 (ataque por H2SO4), óxidos de Fe livres extraído com ditionito-citrato-bicarbonato e ferro mal cristalizado extraídos com oxalato de amônio. A fração argila desferrificada foi analisada por difração de raios X. A compartimentação da paisagem em superfícies geomórficas e a identificação do material de origem mostraram-se bastante eficientes para entendimento da variação dos atributos do solo. A análise individual desses atributos por meio de estatística univariada auxiliou na discriminação das três superfícies geomórficas. O uso de técnicas de geoestatística permitiu a confirmação de que mesmo os atributos do solo apresentaram limites próximos aos das superfícies geomórficas.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Brazilian law passes through a crisis of effectiveness commonly attributed to the extravagance of fundamental rights and public shortage. However, public finances are not dogmatically structured to solve the conflicts around the limitations of public spending. There are ethical conditioning factors, like morality, proportionality and impartiality, however, these principles act separately, while the problem of public shortage is holistic. Also, the subjectivity of politics discretionary in the definition of public spending, which is supported in an indeterminate concept of public interest, needs material orientation about the destination of public funds, making it vulnerable to ideological manipulation, resulting in real process of catching rights. Not even the judicial activism (such as influx of constitutionalism) is shown legally appropriate. The Reserve of Possible, also presents basic ethical failure. Understanding the formation of public shortage is therefore essential for understanding the crisis of effectiveness of state responsibilities, given the significant expansion of the state duty of protection, which does not find legal technique of defense of the established interests. The premise of argument, then, part of the possibility of deducting minimal model ethical of desire to spend (public interest) according to objective parameters of the normative system. Public spending has always been treated disdainfully by the Brazilian doctrine, according to the legal character accessory assigned to the monetary cost. Nonetheless, it is the meeting point between economics and law, or is in the marrow of the problem of public shortage. Expensive Subjects to modernity, as the effectiveness of fundamental rights, pass necessarily an ethical legal system of public spending. From the ethical principles deducted from the planning, only the democratic principle guides the public spending through the approval of public spending in the complex budget process. In other words, there is an ethical distancing of economic reality in relation to state responsibilities. From the dogmatic belief of insufficiency, public spending is evaluated ethically, according to the foundations of modern constitutionalism, in search of possible of the financial reserve, certain that the ethics of public economy is a sine qua non condition for legal ethics.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

A manutenção dos tratores agrícolas pode ser considerada um conjunto de procedimentos que visa a manter o equipamento nas melhores condições de funcionamento, propiciando aumento da vida útil, evitando danos prematuros, eliminando os já observados e concorrendo para maior segurança no trabalho. Essa conduta, apesar de simples, exige atenção e cuidado semelhante ou até maior quando comparado a outro veículo automotor. O presente trabalho teve por objetivo analisar a regularidade e a qualidade da manutenção dos tratores da Fazenda de Ensino, Pesquisa e Produção da UNESP - Jaboticabal, utilizados para os mais variados tipos de trabalho, como aração, gradagem, pulverização e jardinagem, e avaliar a condição técnica dos operadores responsáveis pelas máquinas. Os resultados indicam que a manutenção diária não foi eficiente, o que pode resultar em redução da vida útil das máquinas. Quanto aos operadores, notou-se baixo grau de conhecimento técnico com relação à manutenção dos tratores e falta de treinamento específico.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

O sistema plantio direto preconiza o uso de culturas de cobertura para produção de massa seca sobre o solo. O presente trabalho teve por objetivo estudar a produção e a taxa de decomposição de duas coberturas vegetais - crotalária juncea (Crotalária juncea L.) e mucuna-cinza (Stilozobium niveum L) - em três sistemas de manejo (rolo-faca, triturador de palhas e herbicida), e a capacidade de campo efetiva dos manejos. O experimento foi realizado na área do Laboratório de Máquinas e Mecanização Agrícola (LAMMA), do Departamento de Engenharia Rural, UNESP, Jaboticabal - SP, com delineamento em blocos ao acaso, em esquema fatorial 3x2, originando seis tratamentos, com quatro repetições. Foram analisadas as produções de massa seca das culturas de cobertura antes e após o manejo, a velocidade de deslocamento e a capacidade de campo efetiva para cada conjunto (trator-equipamento). As análises dos valores obtidos permitiram verificar que o fator manejo não interfere na decomposição da massa seca das coberturas vegetais e que as duas culturas de cobertura apresentaram massas semelhantes aos 30; 70 e 125 dias após a semeadura, diferindo aos 97 dias, época na qual a crotalária apresentou maior quantidade de massa seca. Aos 30; 51 e 71 dias após o manejo, as massas secas das culturas foram semelhantes. O manejo com herbicida apresentou maior capacidade de campo efetiva.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Estudos foram desenvolvidos para dimensionar e adaptar o injetor do queimador principal de um aquecedor de água tipo acumulação de 75 L. O diâmetro do injetor foi redimensionado em função da pressão de serviço de 100 mm H2O e poder calorífico inferior do biogás de 21.600 kJ m-3 n, garantindo a manutenção da potência calorífica do equipamento de 20.900 kJ h-1. Os resultados demonstraram que o queimador adaptado operou com biogás adequadamente, com chama estável. A eficiência média do aquecedor foi de 68%, para ganho térmico de 36,7 ºC, correspondendo à temperatura final da água igual a 62,7 ºC, sendo consumido 0,796 m³n de biogás, aquecendo 75 L de água em 72 minutos.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

O hidrociclone é um equipamento amplamente utilizado pela indústria em processos envolvendo separação sólido-líquido, porém ainda pouco utilizado na agricultura irrigada no Brasil. Neste trabalho, avaliou-se o desempenho deste equipamento como pré-filtrante de partículas sólidas, oriundas dos processos erosivos e do assoreamento dos recursos hídricos. Os testes foram realizados com um hidrociclone de geometria Rietema, possuindo diâmetro de 19,2 cm na parte cilíndrica, operando com vazões variando entre 10 m³ h-1 e 27 m³ h-1. Os materiais particulados usados em suspensão foram: solo franco-argiloso e areia de rio. Os resultados mostraram que a perda de carga máxima média foi de 52 kPa e 47 kPa para as suspensões aquosas de areia e solo, respectivamente. Seu melhor desempenho ocorreu operando com suspensão aquosa de areia, apresentando eficiência total de 92,3% para a vazão de 26,9 m³ h-1. Concluiu-se que o equipamento avaliado é mais eficiente para remoção de partículas de areia, podendo ser utilizado como pré-filtro em sistemas de irrigação.