Compreendendo a educação para a inclusão digital: uma análise dos sentidos atribuidos pelos monitores das escolas de inclusão digital e cidadania da EMATER-RN

According to the methodological presuppositions of the understanding interview (KAUFMAAN, 1996), the present work aims to understand the Digital Inclusion starting from the oral speeches of eight monitors of Digital Inclusion and Citizenship Schools of the Technical Assistance and Rural Extension Company EMATER, located in municipal districts that belong to six regions of the state of Rio Grande do Norte. It also had the intention to analyze it (the Digital Inclusion), while educational process and its relation with the citizenship. In its first part, an analysis of the discussions about digital inclusion was developed, and a reflection about the new technologies in current times, followed by a contextualization of the rural space and the methodological course of the study, when its guiding axis and the travelled roads were presented, where the object of study is built slowly and progressively through a theoretical elaboration that increases day by day, as of the technologies forged in the field of research and formation of the subject. The second part presents the study of the collected information, that is organized in three chapters denominated as follows: Conceptions of the local context; What does digital inclusion mean? and The monitor as an educator. The reports do evidence a peculiar dissatisfaction with the social reality where they are found, that contradicts the positive reflections and perspectives of the studied authors, once that, within the actual conjuncture, the rural space has acquired another meaning, no longer being seen as a far late place. By trying to define the digital inclusion, the monitors make an association with change, the access to knowledge, active participation in society and improvement of the life conditions. Here a mission sense stands out, related to the ideological precept, which has been managing its activities. Towards the monitor‟s relation within the classroom, the senses evidence how they are and how they have been developing their daily activities. Tensions, fears and insecurities are identified, but at the same time, a compromise. The final considerations implicate to the need of reorientations in the formative process of this professionals, detaching the importance of their activities while agents of inclusion and social transformation

Rigitano: nova cultivar de umezeiro para porta-enxerto de pessegueiro

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Uma solução para geração automática de trilhas em língua brasileira de sinais em conteúdos multimídia

Deaf people have serious difficulties to access information. The support for sign languages is rarely addressed in Information and Communication Technologies (ICT). Furthermore, in scientific literature, there is a lack of works related to machine translation for sign languages in real-time and open-domain scenarios, such as TV. To minimize these problems, in this work, we propose a solution for automatic generation of Brazilian Sign Language (LIBRAS) video tracks into captioned digital multimedia contents. These tracks are generated from a real-time machine translation strategy, which performs the translation from a Brazilian Portuguese subtitle stream (e.g., a movie subtitle or a closed caption stream). Furthermore, the proposed solution is open-domain and has a set of mechanisms that exploit human computation to generate and maintain their linguistic constructions. Some implementations of the proposed solution were developed for digital TV, Web and Digital Cinema platforms, and a set of experiments with deaf users was developed to evaluate the main aspects of the solution. The results showed that the proposed solution is efficient and able to generate and embed LIBRAS tracks in real-time scenarios and is a practical and feasible alternative to reduce barriers of deaf to access information, especially when human interpreters are not available

Contribuições aos Processos de Clustering com Base em Métricas não-Euclidianas

In this work we present a new clustering method that groups up points of a data set in classes. The method is based in a algorithm to link auxiliary clusters that are obtained using traditional vector quantization techniques. It is described some approaches during the development of the work that are based in measures of distances or dissimilarities (divergence) between the auxiliary clusters. This new method uses only two a priori information, the number of auxiliary clusters Na and a threshold distance dt that will be used to decide about the linkage or not of the auxiliary clusters. The number os classes could be automatically found by the method, that do it based in the chosen threshold distance dt, or it is given as additional information to help in the choice of the correct threshold. Some analysis are made and the results are compared with traditional clustering methods. In this work different dissimilarities metrics are analyzed and a new one is proposed based on the concept of negentropy. Besides grouping points of a set in classes, it is proposed a method to statistical modeling the classes aiming to obtain a expression to the probability of a point to belong to one of the classes. Experiments with several values of Na e dt are made in tests sets and the results are analyzed aiming to study the robustness of the method and to consider heuristics to the choice of the correct threshold. During this work it is explored the aspects of information theory applied to the calculation of the divergences. It will be explored specifically the different measures of information and divergence using the Rényi entropy. The results using the different metrics are compared and commented. The work also has appendix where are exposed real applications using the proposed method

Gráficos de probabilidade normal para avaliação de mecanismos de distribuição de sementes em semeadoras

Currently great emphasis is given for seed metering that assist rigorous demands in relation to longitudinal distribution of seeds, as well as to the index of fails in spacing laws, breaks and double seeds. The evaluation of these variable demands much time and work of attainment of data and processing. The objective of this work went propose to use of graphs of normal probability, facilitating the treatment of the data and decreasing the time of processing. The evaluation methodology consists in the counting of broken seeds, fail spacing and double seeds through the measure of the spacing among seeds, preliminary experiments through combinations of treatments had been carried through whose factors of variation were the level of the reservoir of seeds, the leveling of the seed metering, the speed of displacement and dosage of seeds. The evaluation was carried through in two parts, first through preliminary experiments for elaboration of the graphs of normal probability and later in experiments with bigger sampling for evaluation of the influence of the factors most important. It was done the evaluation of seed metering of rotating internal ring, and the amount of necessary data for the evaluation was very decreased through of the graphs of normal probability that facilitated to prioritize only the significant factors. The dosage of seeds was factor that more important because factor (D) have greater significance.

População de plantas, método de colheita e qualidade de sementes de cenoura, cultivar Brasília

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Modelagem e controle adaptativo de uma planta didática de nível com instrumentação industrial

The control, automation and optimization areas help to improve the processes used by industry. They contribute to a fast production line, improving the products quality and reducing the manufacturing costs. Didatic plants are good tools for research in these areas, providing a direct contact with some industrial equipaments. Given these capabilities, the main goal of this work is to model and control a didactic plant, which is a level and flow process control system with an industrial instrumentation. With a model it is possible to build a simulator for the plant that allows studies about its behaviour, without any of the real processes operational costs, like experiments with controllers. They can be tested several times before its application in a real process. Among the several types of controllers, it was used adaptive controllers, mainly the Direct Self-Tuning Regulators (DSTR) with Integral Action and the Gain Scheduling (GS). The DSTR was based on Pole-Placement design and use the Recursive Least Square to calculate the controller parameters. The characteristics of an adaptive system was very worth to guarantee a good performance when the controller was applied to the plant

Controle do cupim de montículo (Isoptera: Termitidae) de pastagem com fungos entomopatogênicos

The objective of this study was to evaluate the control of mound-building termites (Isoptera: Termitidae) by entomopathogenic fungi (Metarhizium anisopliae and Beauveria bassiana). We developed two experiments, with two copies of application in three sizes of nests. The first was installed in the Salto Macauba farm and second in the Laboratory of Plant Protection at the State University of Mato Grosso do Sul. The first experiment consisted of five repetitions, each nest an experimental unit, with treatments in a factorial 2 (fungi) x 2 (tests) x 2 (type of spraying) + 1 control, distributed completely at random in the area. The treatments were: 1) control - no implementation, 2) Metarril M103 (M. anisopliae) - 10 g/mound-dusting, 3) Metarril M103 - 10 g/mound - via net, 4) Metarril M103 - 15 g/mound-dusting, 5) Metarril M103 - 15 g/mound - via net, 6) Boveril B102 (B. bassiana) - 10 g/mound - dusting, 7) Boveril B102 - 10 g/mound - via net, 8) Boveril B102 - 15 g/mound-dusting and 9) Boveril B102 - 15 g/mound-via net. The testing of mortality were made spraying of the laboratory with the field measurements performed in compliance with the same separation of the nests. The results suggested that the road dust (dosage of 10 g) of the fungi studied showed higher mortality of nests of small size (53%). B. bassiana (Boveril) (10 g) gave 80% mortality of C. cumulans when applied to nests of small size.

Simulação do escoamento multifásico no interior de bombas de cavidades progressivas metálicas

The progressing cavity pumping (PCP) is one of the most applied oil lift methods nowadays in oil extraction due to its ability to pump heavy and high gas fraction flows. The computational modeling of PCPs appears as a tool to help experiments with the pump and therefore, obtain precisely the pump operational variables, contributing to pump s project and field operation otimization in the respectively situation. A computational model for multiphase flow inside a metallic stator PCP which consider the relative motion between rotor and stator was developed in the present work. In such model, the gas-liquid bubbly flow pattern was considered, which is a very common situation in practice. The Eulerian-Eulerian approach, considering the homogeneous and inhomogeneous models, was employed and gas was treated taking into account an ideal gas state. The effects of the different gas volume fractions in pump volumetric eficiency, pressure distribution, power, slippage flow rate and volumetric flow rate were analyzed. The results shown that the developed model is capable of reproducing pump dynamic behaviour under the multiphase flow conditions early performed in experimental works

Número mínimo de colheitas em pepino híbrido estimado por meio do coeficiente de repetibilidade

O objetivo deste trabalho foi estimar o número mínimo de colheitas em experimento com a cultura do pepino. Foram analisados dados de um experimento onde avaliaram-se 14 híbridos de pepino japonês, no delineamento em blocos ao acaso, com quatro repetições e cinco plantas por parcela, conduzidas sob ambiente protegido. Foram efetuadas 32 colheitas, três colheitas por semana, por um período de 72 dias e estimados os coeficientes de repetibilidade, com base na análise de componentes principais para os caracteres produção de frutos por planta, em massa e número, total e comercial. Os resultados permitiram concluir que menos de nove colheitas foram suficientes para analisar as diferenças de produtividade entre os diferentes híbridos, com 95% de certeza de serem eleitos os mais produtivos.

Secagem do resíduo industrial da acerola em leito de jorro: estudos fluidodinâmicos e análise do desempenho do secador

In this research, the drying process of acerola waste was investigated by using a spouted bed drier. The process was conducted using high density polyethylene inert particles with the objective of producing an ascorbic acid-rich final product. The fruit waste was ground and used to prepare different water-maltodextrin suspensions. Initially, fluidynamical experiments were conducted in order to evaluate the feeding effect on the spouted bed drier fluidynamics behavior. The experimental planning 23 + 3 was used to investigate the effect of the following variables: solids concentration, drying air temperature, intermittence time, production efficiency, solids retention and product losses by elutriation of fine particles on drier walls. The effect of selected independent variables on the drier stability was also evaluated based on a parameter defined as the ratio between the feed suspension volume and the total inert particles volume. Finally, the powder quality was verified in experiments with fixed feed flow and varying air drying temperature, drying air velocity and intermittence time. It was observed that the suspension interferes in the spouted bed drier fluidynamics behavior, and higher air flow is necessary to stabilize the drier. The suspension also promotes the expansion of the spouted bed diameter, decreases the solid circulation and favors the air distribution at the flush area. All variables interfere in the spouted bed performance, and the solids concentration has a major effect on the material retention and losses. The intermittence time also has great effect on the stability and material retention. When it comes to production efficiency, the main effect observed was the drying air temperature. First order models were well adjusted to retention and losses data. The acerola powder presented ascorbic acid levels around 600 to 700 mg/100g. Similar moisture and ascorbic acid levels were obtained for powders obtained by spouted bed and spray drier. However, the powder production efficiency of the spray drier was lower when compared to spouted bed drier. When it comes to energetic analysis, the spray drier process was superior. The results obtained for spouted bed drier are promising and highly dependent on the operational parameters chosen, but in general, it is inferred that this drying process is adequate for paste and suspension drying

Doses and forms of application of phosphorus in vernalized garlic

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Degradação fotoquímica de efluentes industriais contendo polipropileno e isoniazida

One of the main impacts to the environment is the water pollution, where the industrial sector is one of the main sources of this problem. In order to search for a solution, the industrial sector is looking forward to new technologies to treat its wastewaters with the goal to reuse the water in the own process. In this mode, the treatment presents a reduction in its costs with the water suply. One of these technologies that are getting more and more applications is the advanced oxidative processes (AOP´s). In this work two industrial wastewaters have been studied, i.e., containing polymers and pharmacus. In the case of the wastewaters with polymers the UV/H2O2 process has been applied with a systematic series of experiments, using irradiation from a mercury lamp and also solar. The following variables of the UV/H2O2 process for the polymers wastewaters have been studied systematically with the lamp reactor: mode of addition of hydrogen peroxide, temperature, time of reaction, hydrogen peroxide concentration and power of the lamp (80, 125, 250 and 400W). The results demonstrated to be satisfactory, obtaining rates of organic charge removal of 100% in 120 minutes of reaction. The studied variables for the experiments with solar irradiation using polymers wastewaters were only the time of reaction, the mode of addition and concentration of the hydrogen peroxide. The results with the solar irradiation demonstrated to be not satisfactory, reaching maximum of 22% of TOC removal in 240 minutes of reaction. This is in accordance with the fact that the solar source has only 5% of low UV irradiation. With respect to the photodegradation of the pharmacus wastewaters, the process UV/H2O2 and photo-Fenton have been applied. As a source of photons, in this case, a mercury UV lamp of 80 W has been used. The studied variables for the experiments with artificial irradiation with the pharmacus wastewaters were: initial concentration of the pollutant, concentration of Fe2+ and time of reaction. The results demonstrated a degree of degradation fairly satisfactory, showing a maximum conversion value of 46% in 120 minutes

Preparação de poliuretana à base de óleo de mamona

Polyurethanes are very versatile macromolecular materials that can be used in the form of powders, adhesives and elastomers. As a consequence, they constitute important subject for research as well as outstanding materials used in several manufacturing processes. In addition to the search for new polyurethanes, the kinetics control during its preparation is a very important topic, mainly if the polyurethane is obtained via bulk polymerization. The work in thesis was directed towards this subject, particularly the synthesis of polyurethanes based castor oil and isophorone diisocianate. As a first step castor oil characterized using the following analytical methods: iodine index, saponification index, refraction index, humidity content and infrared absorption spectroscopy (FTIR). As a second step, test specimens of these polyurethanes were obtained via bulk polymerization and were submitted to swelling experiments with different solvents. From these experiments, the Hildebrand parameter was determined for this material. Finally, bulk polymerization was carried out in a differential scanning calorimetry (DSC) equipment, using different heating rates, at two conditions: without catalyst and with dibutyltin dilaurate (DBTDL) as catalyst. The DSC curves were adjusted to a kinetic model, using the isoconversional method, indicating the autocatalytic effect characteristic of this class of polymerization reaction

Avaliação do comportamento de fluidos micelares na recuperação avançada de petróleo

In heavy oil fields there is a great difficulty of the oil to flow from the reservoir to the well, making its production more difficult and with high cost. Most of the original volumes of oil found in the world are considered unrecoverable by the use of the current methods. The injection of micellar solutions has a direct action in the oil interfacial properties, resulting in an enhanced oil recovery. The objective of this research was the study and selection of micellar solutions with ability to decrease the interfacial interactions between fluids and reservoir formation, increasing oil production. The selected micellar solutions were obtained using commercial surfactants and surfactants synthesized in laboratory, based on the intrinsic properties of these molecules, to use in the enhanced oil recovery. Petroleum Reservoirs were simulated using sandstone plugs from Botucatu formation. Experiments with conventional and enhanced oil recovery techniques were accomplished. The obtained results showed that all micellar solutions were able to enhance oil recovery, and the micellar solution prepared with a SB anionic surfactant, at 2% KCl solution, showed the best recovery factor. It was also accomplished an economic analysis with the SB surfactant solution. With the injection of 20% porous volume of micellar solution, followed by brine injection, the increment in petroleum recovery can reach 81% recovery factor in the 3rd porous volume injected. The increment in the total cost by the addition of surfactant to the injection water represents R$ 7.50/ton of injected fluid