Behavioral effects of "vehicle" microinjected into the dorsal periaqueductal grey of rats tested in the elevated plus maze

To investigate the behavioral effects of different vehicles microinjected into the dorsal periaqueductal grey (DPAG) of male Wistar rats, weighing 200-250 g, tested in the elevated plus maze, animals were implanted with cannulas aimed at this structure. One week after surgery the animals received microinjections into the DPAG of 0.9% (w/v) saline, 10% (v/v) dimethyl sulfoxide (DMSO), 2% (v/v) Tween-80, 10% (v/v) propylene glycol, or synthetic cerebrospinal fluid (CSF). Ten min after the injection (0.5 &micro;l) the animals (N = 8-13/group) were submitted to the elevated plus maze test. DMSO significantly increased the number of entries into both the open and enclosed arms when compared to 0.9% saline (2.7 &plusmn; 0.8 and 8.7 &plusmn; 1.3 vs 0.8 &plusmn; 0.3 and 5.1 &plusmn; 0.9, respectively, Duncan test, P<0.05), and tended to increase enclosed arm entries as compared to 2% Tween-80 (8.7 &plusmn; 1.3 vs 5.7 &plusmn; 0.9, Duncan test, P<0.10). In a second experiment no difference in plus maze exploration was found between 0.9% saline- or sham-injected animals (N = 11-13/group). These results indicate that intra-DPAG injection of some commonly used vehicles such as DMSO, saline or Tween-80 affects the exploratory activity of rats exposed to the elevated plus maze in statistically different manners

A tobacco cDNA reveals two different transcription patterns in vegetative and reproductive organs

In order to identify genes expressed in the pistil that may have a role in the reproduction process, we have established an expressed sequence tags project to randomly sequence clones from a Nicotiana tabacum stigma/style cDNA library. A cDNA clone (MTL-8) showing high sequence similarity to genes encoding glycine-rich RNA-binding proteins was chosen for further characterization. Based on the extensive identity of MTL-8 to the RGP-1a sequence of N. sylvestris, a primer was defined to extend the 5' sequence of MTL-8 by RT-PCR from stigma/style RNAs. The amplification product was sequenced and it was confirmed that MTL-8 corresponds to an mRNA encoding a glycine-rich RNA-binding protein. Two transcripts of different sizes and expression patterns were identified when the MTL-8 cDNA insert was used as a probe in RNA blots. The largest is 1,100 nucleotides (nt) long and markedly predominant in ovaries. The smaller transcript, with 600 nt, is ubiquitous to the vegetative and reproductive organs analyzed (roots, stems, leaves, sepals, petals, stamens, stigmas/styles and ovaries). Plants submitted to stress (wounding, virus infection and ethylene treatment) presented an increased level of the 600-nt transcript in leaves, especially after tobacco necrosis virus infection. In contrast, the level of the 1,100-nt transcript seems to be unaffected by the stress conditions tested. Results of Southern blot experiments have suggested that MTL-8 is present in one or two copies in the tobacco genome. Our results suggest that the shorter transcript is related to stress while the larger one is a flower predominant and nonstress-inducible messenger.

Dose-related effects of propericiazine in rats

We evaluated the effects of the neuroleptic agent propericiazine on animal models of anxiety and memory. Adult male Wistar rats (250 to 350 g) received intraperitoneal injections of propericiazine (0.05, 0.075 and 0.1 mg/kg), diazepam (1 mg/kg), saline, or diazepam vehicle (20% propylene glycol and 80% saline) 30 min prior to the experimental procedure. Animals (10-15 for each task) were tested for step-down inhibitory avoidance (0.3-mA footshock) and habituation to an open-field for memory assessment, and submitted to the elevated plus-maze to evaluate the effects of propericiazine in a model of anxiety. Animals treated with 0.075 mg/kg propericiazine showed a reduction in anxiety measures (P<0.05) similar to that observed in those treated with diazepam. Propericiazine at the doses of 0.05 and 0.1 mg/kg had no significant anxiolytic effects (P>0.05) in the elevated plus-maze model of anxiety. Memory was not affected by propericiazine in any of the tests, but was impaired by diazepam. The results indicate a dose-related, inverse U-shaped effect of propericiazine in an anxiety model, but not on memory tasks, perhaps reflecting involvement of the dopaminergic system in the mechanisms of anxiety.

An EDTA-β-cyclodextrin adsorbent for the adsorption of rare earth elements and its application in preconcentration of ultratrace rare earth elements from seawater

The objectives of this work were synthesizing an EDTA-β-CD adsorbent and investigating its adsorption potential and applications in preconcentration of REEs from aqueous phase. The adsorption capacity of EDTA-β-CD was investigated. The adsorption studies were performed by batch techniques both in one- and multi-component systems. The effects of pH, contact time and initial concentration were evaluated. The analytical detection methods and characterization methods were presented. EDTA-β-CD adsorbent was synthesized successfully with high EDTA coverage. The maximum REEs uptake was 0.310 mmol g-1 for La(III), 0.337 mmol g-1 for Ce(III) and 0.353 mmol g-1 for Eu(III), respectively. The kinetics of REEs onto EDTA-β-CD fitted well to pseudo-second-order model and the adsorption rate was affected by intra-particle diffusion. The experimental data of one component studies fitted to Langmuir isotherm model indicating the homogeneous surface of the adsorbent. The extended Sips model was applicable for the isotherm studies in three-component system. The electrostatic interaction, chelation and complexation were all involved in the adsorption mechanism. The preconcentration of RE ions and regeneration of EDTA-β-CD were successful. Overall, EDTA-β-CD is an effective adsorbent in adsorption and preconcentration of REEs.

Modification of commercial poly-lactide for extrusion coated food packaging applications

Poly-L-lactide (PLLA) is a widely used sustainable and biodegradable alternative to replace synthetic non-degradable plastic materials in the packaging industry. Conversely, its processing properties are not always optimal, e.g. insufficient melt strength at higher temperatures (necessary in extrusion coating processes). This thesis reports on research to improve properties of commercial PLLA grade (3051D from NatureWorks), to satisfy and extend end-use applications, such as food packaging by blending with modified PLLA. Adjustment of the processability by chain branching of commercial poly-L-lactide initiated by peroxide was evaluated. Several well-defined branched structures with four arms (sPLLA) were synthesized using pentaerythritol as a tetra-functional initiator. Finally, several block copolymers consisting of polyethylene glycol and PLLA (i.e. PEGLA) were produced to obtain a well extruded material with improved heat sealing properties. Reactive extrusion of poly-L-lactide was carried out in the presence of 0.1, 0.3 and 0.5 wt% of various peroxides [tert-butyl-peroxybenzoate (TBPB), 2,5-dimethyl-2,5-(tert-butylperoxy)-hexane (Lupersol 101; LOL1) and benzoyl peroxide (BPO)] at 190C. The peroxide-treated PLLAs showed increased complex viscosity and storage modulus at lower frequencies, indicating the formation of branched/cross linked architectures. The material property changes were dependent on the peroxide, and the used peroxide concentration. Gel fraction analysis showed that the peroxides, afforded different gel contents, and especially 0.5 wt% peroxide, produced both an extremely high molar mass, and a cross linked structure, not perhaps well suited for e.g. further use in a blending step. The thermal behavior was somewhat unexpected as the materials prepared with 0.5 wt% peroxide showed the highest ability for crystallization and cold crystallization, despite substantial cross linking. The peroxide-modified PLLA, i.e. PLLA melt extruded with 0.3 wt% of TBPB and LOL1 and 0.5 wt% BPO was added to linear PLLA in ratios of 5, 15 and 30 wt%. All blends showed increased zero shear viscosity, elastic nature (storage modulus) and shear sensitivity. All blends remained amorphous, though the ability of annealing was improved slightly. Extrusion coating on paperboard was conducted with PLLA, and peroxide-modified PLLA blends (90:10). All blends were processable, but only PLLA with 0.3 wt% of LOL1 afforded a smooth high quality surface with improved line speed. Adhesion levels between fiber and plastic, as well as heat seal performance were marginally reduced compared with pure 3051D. The water vapor transmission measurements (WVTR) of the blends containing LOL1 showed acceptable levels, only slightly lower than for comparable PLLA 3051D. A series of four-arm star-shaped poly-L-lactide (sPLLA) with different branch length was synthesized by ring opening polymerization (ROP) of L-lactide using pentaerythritol as initiator and stannous octoate as catalyst. The star-shaped polymers were further blended with its linear resin and studied for their melt flow and thermal properties. Blends containing 30 wt% of sPLLA with low molecular weight (30 wt%; Mwtotal: 2500 g mol-1 and 15000 g mol-1) showed lower zero shear viscosity and significantly increased shear thinning, while at the same time slightly increased crystallization of the blend. However, the amount of crystallization increased significantly with the higher molecular weight sPLLA, therefore the star-shaped structure may play a role as nucleating agent. PLLA-polyethylene glycol–PLLA triblock copolymers (PEGLA) with different PLLA block length were synthesized and their applicability as blends with linear PLLA (3051D NatureWorks) was investigated with the intention of improving heat-seal and adhesion properties of extrusion-coated paperboard. PLLA-PEG-PLLA was obtained by ring opening polymerization (ROP) of L-lactide using PEG (molecular weight 6000 g mol-1) as an initiator, and stannous octoate as catalyst. The structures of the PEGLAs were characterized by proton nuclear magnetic resonance spectroscopy (1H-NMR). The melt flow and thermal properties of all PEGLAs and their blends were evaluated using dynamic rheology, and differential scanning calorimeter (DSC). All blends containing 30 wt% of PEGLAs showed slightly higher zero shear viscosity, higher shear thinning and increased melt elasticity (based on tan delta). Nevertheless, no significant changes in thermal properties were distinguished. High molecular weight PEGLAs were used in extrusion coating line with 3051D without problems.

Ripening pattern of guava cv. Pedro Sato

Guava is a fruit with high respiration rates and a very short shelf life. Since information on its respiration pattern is contradictory, the objective was to study the changes occurring in the fruit during ripening and to relate them to the respiration behavior of this fruit. Guavas were picked at the half-ripe stage and stored for 8 days at 22 ± 1 ºC and 78 ± 1% relative humidity. The analyses conducted were: peel and pulp coloration, firmness, total soluble solids (TSS), total titratable acidity (TTA), and ethylene production. According to the results, it was verified that the parameters analyzed apparently do not coincide and are ethylene-independent. There was an accentuated ethylene production during ripening, starting from the 4th day. The ethylene synthesis continued increasing up to the 8th day, when the fruits were already decomposing. It was observed that the firmness decreased sharply in the first three days of ripening, and the skin and pulp color changed during ripening. The TSS, total soluble solids, and the TTA, total titratable acidity, practically did not change during the ripening, even with the increased ethylene production. It can be concluded that guava is a fruit that presents characteristics of climacteric and non-climacteric fruits.

Modified atmosphere efficiency in the quality maintenance of Eva apples

Modified atmosphere is a method of food preservation that provides increased lifetime, decreases deterioration losses, and facilitates marketing. The objective of this study was to evaluate the efficiency of different plastic films in modifying the atmosphere around Eva apples to assure quality maintenance during postharvest storage. The fruits were cleaned and separated into three treatment groups: polypropylene, low density polyethylene, and high density polyethylene packing with a total of 5 fruits per package for each evaluation period. A group of control apples was not submitted to atmospheric modification. After the treatment, all fruits were stored at 0.5±0.5°C (cold storage) for up to 225 days. The analyses were performed at 45, 135, and 225 days after cold storage. Respiration, ethylene production, firmness, mass loss, total pectin, soluble pectin, soluble solids, total acidity, and epidermis background color of each treatment group were evaluated. The high density polyethylene film treatment did not show a decrease in ethylene production during storage and allowed the fruits to maintain a greater firmness and smaller percentage of mass loss during the study period. Moreover, the storage of the Eva apple cultivar under modified atmosphere allowed the preservation of quality for up to seven months.

Growth and maturation of pequi fruit of the Brazilian cerrado

The objective of this study was to characterize the development of pequi fruit (Caryocar brasiliense) of the Brazilian cerrado. It takes 84 days (12 weeks) for pequi to develop with the onset of flowering in September and early fruit set in January. Pequi fruit showed a simple sigmoid growth curve, and its growth was characterized based on fresh mass and longitudinal and transverse diameters. The contents of titratable acidity, soluble solids, β-carotene, and vitamin C increased during fruit growth, reaching their maximum values at the 12th week (84 days) after anthesis. Pequi is a fruit with an extremely high respiratory activity; its respiratory rate decreased during its development. Pequi fruit has been classified as a non-climacteric fruit due to the decrease of both respiration and ethylene production rates during maturation and ripening.

Survey, survival and control of Alternaria alternata in wheat seeds

The fungus Alternaria alternata was quantified in 75 wheat seed samples collected from three different regions of southern Brazil for Cropping and Use Value (CUV) I, II and III. Fungal presence was evaluated in two hundred disinfested seeds per sample before sowing in a potato-dextrose-agar medium + antibiotic (PDA+A). Fungus survival was evaluated every 45 days for 180 days for three seed batches from six wheat cultivars stored in propylene bags in a storehouse, with air temperature varying between 18 to 22 °C and relative air humidity around 60%. The efficacy of carboxin+thiram, difenoconazol, thiram, triadimenol, triticonazol and triticonazol + iprodione fungicides to control A. alternata was determined. A. alternata was detected in all the samples with an incidences of 39.6 %, 38.8% and 35.9% for the CUV I, CUV II and CUV III regions, respectively. The highest mean incidence of the fungus was found in the CUV I region, the coolest and most humid, and was significantly different from the other two regions. The average reduction in A. alternata viability in the wheat cultivar seeds was 49.5% during the 180 days of storage (inter-harvest period), demonstrating that infected seeds are the primary inoculum source for the fungus. The triticonazol + iprodione fungicide mixture efficiently controls A. alternata.

Studies of nucleophilic attack on tris (pentafluorophenyl) phosphine and its oxides

The reaction of tris(pentafluorophenyl)phosphine [5] with the nucleophiles dimethyl formamide (DMF), hexamethylphosphoric triamide (HMPA), diethyl formamide (DEF), hexaethylphosphoric triamide (HEPA), hydrazine, N,N-dimethyl hydrazine (in presence and/or absence of KF), phenylhydrazine, ammonium hydroxide, formamide, aniline, sodium hydrogen sulfide, and hexaethylphosphorous triamide was investigated. The reaction of [5] with DMF and HMPA gave the same product, namely tris-[4-(N,N-dimethylamino)-2,3,5,6-tetrafluorophenyl]phosphine [12] but in higher yield in the case of HMPA. Compound (5] also reacted with DEF to give tris[4-(N,N-diethylamino)-2,3,5,6-tetrafluorophenyl] phosphine [14]. When [51 was treated with HEPA, it gave a mixture of bis(pentafluorophe~yl)-(N,N-diethylamino-tetrafluorophenyl)phosphine, pentafluorophenyl-bis-(N,N-diethylamino-tetrafluorophenyl)phosphine and tris (N,N-diethylamino-tetrafluorophenyl)phosphine. Treatment of [5] with aqueeus hydrazine solution in excess ethanol gave tris(4-hydrazo-2,3,4,6-tetrafluorophenyl)phosphine [1s1 in high yield while reaction with aqueous hydrazine led to C-P cleavage and production of tetrafluorophenyl hydrazine. With N,N-dimethyl hydrazine, [5] gave tris(4-N,N-dimethylhydrazine-2,3,5,6-tetrafluorophenyl) phosphine {20j. The latter could be obtained in higher yield and shorter reaction time, by the addition of KF. The reaction of compound {51 with phenylhydrazine in THF gave bis(pentafluorophe~yl)-4-S-phenylhydrazino- 2,3,5,6-tetrafluorophenyl phosphine [22] in low yield. Reaction of [5] with ammonium hydroxide in THF at high pressure in the presence of KF gave tris-~4-amino-2,3,5,6-tetrafluorophenyl)phosphine [25]. Similarly, formamide led to a mixture of (C6F4NHZ)3P, (C6F4NHZ)ZPC6FS, (C6F4NHZ)ZPC6F4NHCHO, and C6F4NHZP(C6Fs)(C6F4NHCHO). When [5] was treated with aniline, a mixture of mono-, di-, and tri-substituted products was obtained. Sodium hydrogen sulfide in ethylene glycol/ pyridine led to C-P cleavage and the isolation of pentafluorobenzene and tetrafluorothiophenol. Reaction of [5] and its oxide [35] with different alkoxides in the corresponding alcohols led mainly to C-P bond cleavage products, with the exception of one case where sodium methoxide was used in ether, and which led to tris-(4-methoxy-2,3,9,6-tetrafluorophenyl)phosphine [37]. On the basis of various spectroscopic data, it was concluded that the para position in compound [5] was generally the favoured site of attack.

(A) BODIPY as a versatile fluorophore (B) Synthesis of PNAs via Staudinger reaction

(A) In recent years, 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY) fluorophores have attracted considerable interest due to their unique photochemical properties. However detailed studies on the stability of BODIPY and analogues under acidic and basic conditions have been lacking. Thus the stability of a series of BODIPY analogues in acidic (di- and trichloroacetic acid) and basic (aqueous ammonium hydroxide) conditions was investigated using 11B NMR spectroscopy. Among the analogues tested, 4,4-diphenyl BODIPY was the most stable under the conditions used in the experiments. It was found that reaction of 4,4-dimethoxy BODIPY with dichloroacetic acid gave mixed anhydride 4,4-bis(dichloroacetoxy) BODIPY in good yields. Treatment of the latter mixed anhydride with alcohols such as methanol and ethanol in the presence of a base afforded corresponding borate esters, whereas treatment with 1,2-diols such as ethylene glycol and catechol in the presence of a base gave corresponding cyclic borate esters. Furthermore treatment of 4,4-difluoro-8-methyl-BODIPY with secondary amines in dihalomethane resulted in carbon–carbon bond formation at the meso-methyl position of BODIPY via Mannich-type reactions. The resulting modified BODIPY fluorophores possess high fluorescent quantum yields. Five BODIPY analogues bearing potential ion-binding moieties were synthesized via this Mannich-type reaction. Among these, the BODIPY bearing an aza-18-crown-5 tether was found to be selective towards copper (II) ion, resulting in a large blue shift in absorption and sharp fluorescent quenching, whereas aza-15-crown-4 analogue was selected towards fluoride ion, leading to effective florescent quenching and blue shift. (B) Peptide nucleic acids (PNA), as mimics of natural nucleic acids, have been widely applied in molecular biology and biotechnology. Currently, the preparation of PNA oligomers is commonly achieved by a coupling reaction between carboxyl and amino groups in the presence of an activator. In this thesis attempts were made towards the synthesis of PNA through the Staudinger ligation reactions between C-terminal diphenylphosphinomethanethiol thioesters and N-terminal α-azido PNA building blocks.

Synthesis, Catalysis and Stoichiometric Reactivity of Mo Imido Complexes

The syntheses, catalytic reactivity and mechanistic investigations of novel Mo(IV) and Mo(VI) imido systems is presented. Attempts at preparing mixed bis(imido) Mo(IV) complexes of the type (RN)(R′N)Mo(PMe3)n (n = 2 or 3) derived from the mono(imido) complexes (RN)Mo(PMe3)3(X)2 (R = tBu (1) or Ar (2); X = Cl2 or HCl, Ar=2,6-iPr2C6H3) are also described. The addition of lithiated silylamides to 1 or 2 results in the unexpected formation of the C-H activated cyclometallated complexes (RN)Mo(PMe3)2(η2-CH2PMe2)(X) (R = Ar, X = H (3); R = tBu, X = Cl (4)). Complexes 3 and 4 were used in the activation of R′E-H bonds (E = Si, B, C, O, P; R′ = alkyl or aryl), which typically give products of addition across the M-C bond of the type (RN)Mo(PMe3)3(ER′)(X) (4). In the case of 2,6-dimethylphenol, subsequent heating of 4 (R = Ar, R′ = 2,6-Me2C6H3, E = O) to 50 °C results in C-H activation to give the cyclometallated complex (ArN)Mo(PMe3)3(κ2-O,C-OPh(Me)CH2) (5). An alternative approach was developed in synthesizing the mixed imido complex (ArN)(tBuN)Mo(PMe3)(η2-C2H4) (6) through EtMgBr reduction of (ArN)(tBuN)MoCl2(DME) in the presence of PMe3. Complex 6 reacts with various hydro- and chlorosilanes to give β-agostic silylamido complexes and in one case, when Me2SiHCl is the silane, leads to the silanimine complex (tBuN)Mo(η2-SiMe2-NAr)(Et)(η2-C2H4) (7). Mechanistic studies on the formation of the Mo(VI) tris(silyl) complex (tBuN)Mo(SiHPh)(H){(μ-NtBu)(SiHPh)}(PMe3)2 (8) were done from the addition of three equivalents of PhSiH3 to (tBuN)Mo(PMe3)(η2-C2H4), resulting in identification of β- and γ-agostic SiH…Mo intermediates. The reactivity of complex 8 towards ethylene and nitriles was studied. In both cases coupling of unsaturated substrates with the Mo-Si bond of the metalacycle was observed. In the case of nitriles, insertion into the 4-membered disilaazamolybdacycle results in complexes of the type (tBuN)Mo{(κ2-Si,C-SiHPh-NtBu-SiHPh-N=C(R)}(PMe3)2. Catalytic hydrosilylation of carbonyls mediated by the β-agostic silylamido complex (ArN)2Mo(η3-NtBu-SiMe2-H)(H) (9) was investigated. Stoichiometric reactions with organic substrates showed that catalysis with 9 does not proceed via the conventional insertion of substrate into the Mo-H bond.

Encapsulation de Dehalococcoides: avantage pour la déhalogénation des solvants chlorés en sites contaminés

Le tétrachloroéthène (PCE) et les éthènes chlorés qui lui sont apparentés ont été abondamment utilisés pour plusieurs applications en industrie dès le début du 20e siècle. Ils sont cependant comptés parmi les polluants les plus communs des sols et de l’eau et beaucoup d’efforts sont déployés afin de les éliminer. Nous croyons que la conversion des éthènes chlorés en éthènes par des microorganismes est une solution prometteuse. Le premier aspect du projet visait donc à établir les conditions pour lesquelles un consortium enrichi en Dehalococcoides ethenogenes permettrait la conversion complète de PCE en éthène. Les expériences réalisées nous ont permis de souligner le rôle de l’acide lactique ajouté aux cultures comme source de carbone et source indirecte d’électrons pour la déhalorespiration. Nous avons également pu établir l’effet de la concentration initiale de biomasse dans les cultures sur le profil de déhalogénation du PCE. Le deuxième aspect du projet visait à développer un protocole d’encapsulation du consortium dans une matrice polymérique afin de profiter des nombreux avantages potentiels de l’encapsulation. Nous avons testé trois montages d’encapsulation différents : atomisation avec jet d’air, atomisation avec vibrations ultrasoniques et « drop-wise ». Le dernier montage prévoyait l’encapsulation des cultures dans des billes d’alginate enrobées de chitosane gélifié par du lignosulfonate. C’est le seul montage qui nous a permis d’encapsuler le consortium de façon efficace sans effet significatifs négatifs sur son activité de déchlorination. Aussi, la comparaison des profils de déhalogénation du PCE de cellules encapsulées et cellules libres a montré une plus faible accumulation de TCE, 1,2-DCE et VC dans les échantillons de cellules encapsulée et, par conséquent, une conversion plus rapide et plus complète du PCE en éthène. Finalement, nous avons observé une tendance favorable à l’idée que les microorganismes encapsulés bénéficient d’un effet de protection contre de faibles concentrations d’oxygène.

Polymeric micelles as versatile carriers for drugs and nucleic acids

Le cancer est la principale cause de mortalité au Canada. Les taxanes (e.g. le paclitaxel et le docétaxel (DCTX)) constituent des remèdes efficaces contre une série de tumeurs solides telles que les cancers du sein, du poumon et de l’ovaire. Par ailleurs, des acides nucléiques (e.g. les oligonucléotides antisens (AON) ou les petits ARN interférents (siRNAs)), capables de supprimer sélectivement certains oncogènes impliqués dans la carcinogénèse, sont actuellement étudiés pour traiter une large gamme de cancers. Bien que l’activité des taxanes et des acides nucléiques soit bien établie sur des modèles humains et/ou animaux, plusieurs aspects physico-chimiques et cliniques restent encore à améliorer. Leur solubilité limitée (pour les taxanes), leur dégradation rapide dans le sang (pour les acides nucléiques), leur élimination précoce, leur absence de sélectivité et leur toxicité envers les tissus sains sont les principaux facteurs limitant leur efficacité. C’est pourquoi de nombreux efforts ont porté sur l’élaboration de systèmes de vectorisation ciblés à base de polymères, dans le but de surmonter les problèmes associés aux thérapies actuelles. Dans cette thèse, deux types de micelles polymères ont été développés pour la vectorisation de DCTX et d’acides nucléiques. D’une part, des micelles de poly(oxyde d’éthylène)-bloc-poly(oxyde de butylène/styrène) ont été étudiées pour la première fois pour solubiliser le DCTX et le protéger de l’hydrolyse. Ces polymères se sont révélés moins toxiques que le surfactant utilisé commercialement pour solubiliser le DCTX (i.e. polysorbate 80) et ont permis une libération prolongée du principe actif. D’autre part, deux systèmes différents de micelles polyioniques (PICM) ont été mis au point pour la vectorisation d’acides nucléiques. De nouveaux conjugués de poly(éthylène glycol) (PEG)-oligonucléotide ont été proposés pour la protection et la libération contrôlée d’AON. Lorsque ces conjugués ont été formulés avec des dendrimères de poly(amidoamine) (PAMAM), des complexes de taille homogène ont été obtenus. Ces PICM ont permis de prolonger la libération de l’AON et de le protéger efficacement contre la dégradation enzymatique. De plus, des polymères de poly(oxyde d’éthylène)-bloc-poly(méthacrylate de propyle-co-acide méthacrylique) ont été incorporés afin de conférer des propriétés acido-sensibles aux PICM. Dans ces micelles, formées de ce dernier polymère formulé avec le dendrimère PAMAM, des oligonucléotides (AON et siRNA) ciblant l’oncogène Bcl-2 ont été encapsulés. L’internalisation cellulaire fut assurée par un fragment d’anticorps monoclonal (Fab’) situé à l’extrémité de la couronne de PEG. Après l’internalisation cellulaire et la protonation des unités d’acide méthacrylique sous l’effet de l’acidification des endosomes, les micelles se sont affranchies de leur couronne. Elles ont ainsi exposé leur cœur composé d’acide nucléique et de dendrimère PAMAM, qui possède une charge positive et des propriétés endosomolytiques. En effet, ces PICM acido-sensibles ciblées ont permis d’augmenter la biodisponibilité des acides nucléiques vectorisés et se sont avérées plus efficaces pour silencer l’oncoprotéine Bcl-2 que les micelles non ciblées ou que le dendrimère de PAMAM commercial seul. Finalement, les nanovecteurs polymères présentés dans cette thèse se révèlent être des systèmes prometteurs pour la vectorisation des anticancéreux et des acides nucléiques.

Systèmes vésiculaires colloïdaux pour la vectorisation de la 1-β-D-arabinofuranosylcytosine

La 1-β-D-arabinofuranosylcytosine (ara-C) demeure l’agent anticancéreux principalement utilisé dans le traitement de la leucémie myéloblastique aiguë (LMA), malgré sa dégradation et son élimination rapide après une administration parentérale. Son encapsulation dans des vecteurs pharmaceutiques, majoritairement des liposomes, a permis de surmonter ces inconvénients. L’objectif général de ce projet de doctorat était de développer deux systèmes à libération prolongée, à base de phospholipides, de cholestérol et de poly(éthylène glycol) (PEG) afin d’encapsuler l’ara-C et ultimement, d’améliorer son efficacité dans le traitement de la LMA. Des Sphérulites® (vésicules multilamellaires d’un type particulier) ont d’abord été étudiées pour leur forte capacité d’encapsulation, due à leur mode de préparation. Par la suite, une formulation liposomale capable, d’une part de cibler spécifiquement les cellules leucémiques et, d’autre part, de promouvoir la libération intracellulaire de l’ara-C grâce à sa sensibilité au pH, a été mise au point. Les deux formulations se devaient d’avoir un faible diamètre, une stabilité en présence de fluides biologiques et des temps de circulation prolongés chez l’animal. Une préparation de Sphérulites®, composée de Phospholipon 90G, de Solutol HS15 et de cholestérol, a permis d’obtenir des vésicules de 300 nm de diamètre. Un dérivé lipidique de PEG a pu être fixé à leur surface, sans modifier la disposition concentrique des lamelles, ni changer leur stabilité. Les Sphérulites® PEGylées ont été chargées d’ara-C et injectées chez le rat par la voie intraveineuse. Elles ont démontré des temps de circulation significativement prolongés comparativement aux Sphérulites® sans PEG. Cependant, l’ara-C s’est retrouvée éliminée de la circulation sanguine très rapidement, révélant une libération précoce du principe actif à partir de ces vésicules. Les liposomes sensibles au pH (~150 nm) ont été obtenus suite à l’insertion d’un copolymère à base de dioctadécyle, de N-isopropylacrylamide (NIPAM) et d’acide méthacrylique. L’anticorps anti-CD33, soit complet soit son fragment Fab’, a été fixé à la surface des liposomes afin de cibler les cellules leucémiques. Les essais in vitro ont démontré la spécificité de la formulation pour différentes cellules leucémiques (CD33+), sa stabilité en présence de protéines plasmatiques et la libération intracellulaire d’un marqueur fluorescent et de l’ara-C. Enfin, des études menées chez la souris saine et immunodéprimée inoculée de cellules HL60 ont montré que la formulation exposant le fragment Fab’ possédait un profil pharmacocinétique et une biodistribution semblables à ceux des liposomes contrôles non-ciblés. L’encapsulation de l’ara-C a permis d’améliorer grandement ses temps de circulation après une administration intraveineuse. Cependant, bien que les immunoliposomes ont permis de prolonger la survie des souris leucémiques comparativement à l’ara-C libre, l’addition du polymère sensible au pH n’a pas permis d’apporter de réel avantage à la formulation lorsque administrée in vivo. Les résultats obtenus dans ce travail de thèse ont, dans un premier temps, mis en évidence que les Sphérulites® pourraient s’avérer utiles dans la vectorisation d’agents anticancéreux si leur capacité à retenir le principe actif in vivo était améliorée. Dans un second temps, les données présentées avec les immunoliposomes suggèrent qu’ils pourraient apporter un bénéfice notable dans le traitement de la LMA.