Objective assessment of the built environment and its relationship to physical activity and obesity

The role of physical activity in the promotion of individual and population health has been well documented in research and policy publications. Significant research activities have produced compelling evidence for the support of the positive association between physical activity and improved health. Despite the knowledge about these public health benefits of physical activity, over half of US adults do not engage in physical activity at levels consistent with public health recommendations. Just as physical inactivity is of significant public health concern in the US, the prevalence of obesity (and its attendant co-morbidities) is also increasing among US adults.^ Research suggests racial and ethnic disparities relevant to physical inactivity and obesity in the US. Various studies have shown more favorable outcomes among non-Hispanic whites when compared to other minority groups as far as physical activity and obesity are concerned. The health disparity issue is especially important because Mexican-Americans who are the fastest growing segment of the US population are disproportionately affected by physical inactivity and obesity by a significant margin (when compared to non-Hispanic whites), so addressing the physical inactivity and obesity issues in this group is of significant public health concern. ^ Although the evidence for health benefits of physical activity is substantial, various research questions remain on the potential motivators for engaging in physical activity. One area of emerging interest is the potential role that the built environment may play in facilitating or inhibiting physical activity.^ In this study, based on an ongoing research project of the Department of Epidemiology at the University of Texas M. D. Anderson Cancer Center, we examined the built environment, measured objectively through the use of geographical information systems (GIS), and its association with physical activity and obesity among a cohort of Mexican- Americans living in Harris County, Texas. The overall study hypothesis was that residing in dense and highly connected neighborhoods with mixed land-use is associated with residents’ increased participation in physical activity and lowered prevalence of obesity. We completed the following specific aims: (1) to generate a land-use profile of the study area and create a “walkability index” measure for each block group within the study area; (2) to compare the level of engagement in physical activity between study participants that reside in high walkability index block groups and those from low walkability block groups; (3) to compare the prevalence of obesity between study participants that reside in high walkability index block groups and those from low walkability block groups. ^ We successfully created the walkability index as a form of objective measure of the built environment for portions of Harris County, Texas. We used a variety of spatial and non-spatial dataset to generate the so called walkability index. We are not aware of previous scholastic work of this kind (construction of walkability index) in the Houston area. Our findings from the assessment of relationships among walkability index, physical activity and obesity suggest the following, that: (1) that attempts to convert people to being walkers through health promotion activities may be much easier in high-walkability neighborhoods, and very hard in low-walkability neighborhoods. Therefore, health promotion activities to get people to be active may require supportive environment, walkable in this case, and may not succeed otherwise; and (2) Overall, among individuals with less education, those in the high walkability index areas may be less obese (extreme) than those in the low walkability area. To the extent that this association can be substantiated, we – public health practitioners, urban designers, and policy experts – we may need to start thinking about ways to “retrofit” existing urban forms to conform to more walkable neighborhoods. Also, in this population especially, there may be the need to focus special attention on those with lower educational attainment.^

The impact of parent acculturation on parental fruit and vegetable intake, child fruit and vegetable intake, and child perceived access and availability to fruits and vegetables in the home environment

The purpose of this thesis was to investigate the association between parent acculturation and parental fruit and vegetable intake, child fruit and vegetable intake, and child access and availability to fruits and vegetables. Secondary data analysis was performed on a convenience sample of low-income Hispanic-identifying parents (n = 177) and children from a baseline survey from the Sprouting Healthy Kids intervention. T tests were used to examine the association between parent acculturation status (acculturated or non-acculturated) and fruit intake, vegetable intake and combined fruit and vegetable intake of both the parent and the child. T tests were also used to determine the relationship between parent acculturation and child access and availability to fruits, vegetables, and combined fruits and vegetables. Statistical significance was set at a p level of 0.05. The mean FVI for the parents and children were 3.41 servings and 2.96 servings, respectively. Statistical significance was found for the relationships between parent acculturation and parent fruit intake and parent acculturation and child fruit access. Lower acculturation of the parent was significantly related to higher fruit intake. Counter to the hypothesis, higher acculturation was found to be associated with greater access to fruits for the child. These findings suggest the necessity for not only culturally specific nutrition interventions, but the need for interventions to target behaviors for specific levels of acculturation within a culture. ^

Survey on economic assessment of the improvement of the quality of environment: the case of the fight against floods in Cotonou (Benin Living Standard Survey)

This study aims to analyze households' attitude toward flood risk in Cotonou in the sense to identify whether they are willing or not to leave the flood-prone zones. Moreover, the attitudes toward the management of wastes and dirty water are analyzed. The data used in this study were obtained from two sources: the survey implemented during March 2011 on one hundred and fifty randomly selected households living in flood-prone areas of Cotonou, and Benin Living Standard Survey of 2006 (Part relative to Cotonou on 1,586 households). Moreover, climate data were used in this study. Multinomial probability model is used for the econometric analysis of the attitude toward flood risk. While the attitudes toward the management of wastes and dirty water are analyzed through a simple logit. The results show that 55.3% of households agreed to go elsewhere while 44.7% refused [we are better-off here (10.67%), due to the proximity of the activities (19.33), the best way is to build infrastructures that will protect against flood and family house (14.67%)]. The authorities have to rethink an alternative policy to what they have been doing such as building socio-economic houses outside Cotonou and propose to the households that are living the areas prone to inundation. Moreover, access to formal education has to be reinforced.

Assessment of FDI impact on Thailand's production sectors : implications for investment promotion activities

This paper examines the overall and sectoral economic impact of foreign direct investment (FDI) on the Thai economy using the economic data from 2005-2013. In assessing the overall economic impact, it is found that FDI has contributed positively to Thailand's economic growth. However, when analyzing the sectoral details, the empirical results indicate that FDI has a varying impact on the productive sectors in Thailand. Out of the 9 sub-sectors covered by this study, 5 sub-sectors (manufacturing, construction, financial, wholesale, retail trade, and agriculture) show strong statistically-significant positive effects of FDI on the relevant sector's value-added output. Based on these findings, it is suggested that policy-makers, including the Board of Investment, should aim to promote FDI with special consideration of the sectoral impact that would enable Thailand's FDI promotion policies to be more productive and beneficial for the Thai economy.

Modelling the Impact of Built Environment, Geographical Scales and Latent Constructs On Individual Travel Behaviour

La relación entre la estructura urbana y la movilidad ha sido estudiada desde hace más de 70 años. El entorno urbano incluye múltiples dimensiones como por ejemplo: la estructura urbana, los usos de suelo, la distribución de instalaciones diversas (comercios, escuelas y zonas de restauración, parking, etc.). Al realizar una revisión de la literatura existente en este contexto, se encuentran distintos análisis, metodologías, escalas geográficas y dimensiones, tanto de la movilidad como de la estructura urbana. En este sentido, se trata de una relación muy estudiada pero muy compleja, sobre la que no existe hasta el momento un consenso sobre qué dimensión del entorno urbano influye sobre qué dimensión de la movilidad, y cuál es la manera apropiada de representar esta relación. Con el propósito de contestar estas preguntas investigación, la presente tesis tiene los siguientes objetivos generales: (1) Contribuir al mejor entendimiento de la compleja relación estructura urbana y movilidad. y (2) Entender el rol de los atributos latentes en la relación entorno urbano y movilidad. El objetivo específico de la tesis es analizar la influencia del entorno urbano sobre dos dimensiones de la movilidad: número de viajes y tipo de tour. Vista la complejidad de la relación entorno urbano y movilidad, se pretende contribuir al mejor entendimiento de la relación a través de la utilización de 3 escalas geográficas de las variables y del análisis de la influencia de efectos inobservados en la movilidad. Para el análisis se utiliza una base de datos conformada por tres tipos de datos: (1) Una encuesta de movilidad realizada durante los años 2006 y 2007. Se obtuvo un total de 943 encuestas, en 3 barrios de Madrid: Chamberí, Pozuelo y Algete. (2) Información municipal del Instituto Nacional de Estadística: dicha información se encuentra enlazada con los orígenes y destinos de los viajes recogidos en la encuesta. Y (3) Información georeferenciada en Arc-GIS de los hogares participantes en la encuesta: la base de datos contiene información respecto a la estructura de las calles, localización de escuelas, parking, centros médicos y lugares de restauración. Se analizó la correlación entre e intra-grupos y se modelizaron 4 casos de atributos bajo la estructura ordinal logit. Posteriormente se evalúa la auto-selección a través de la estimación conjunta de las elecciones de tipo de barrio y número de viajes. La elección del tipo de barrio consta de 3 alternativas: CBD, Urban y Suburban, según la zona de residencia recogida en las encuestas. Mientras que la elección del número de viajes consta de 4 categorías ordinales: 0 viajes, 1-2 viajes, 3-4 viajes y 5 o más viajes. A partir de la mejor especificación del modelo ordinal logit. Se desarrolló un modelo joint mixed-ordinal conjunto. Los resultados indican que las variables exógenas requieren un análisis exhaustivo de correlaciones con el fin de evitar resultados sesgados. ha determinado que es importante medir los atributos del BE donde se realiza el viaje, pero también la información municipal es muy explicativa de la movilidad individual. Por tanto, la percepción de las zonas de destino a nivel municipal es considerada importante. En el contexto de la Auto-selección (self-selection) es importante modelizar conjuntamente las decisiones. La Auto-selección existe, puesto que los parámetros estimados conjuntamente son significativos. Sin embargo, sólo ciertos atributos del entorno urbano son igualmente importantes sobre la elección de la zona de residencia y frecuencia de viajes. Para analizar la Propensión al Viaje, se desarrolló un modelo híbrido, formado por: una variable latente, un indicador y un modelo de elección discreta. La variable latente se denomina “Propensión al Viaje”, cuyo indicador en ecuación de medida es el número de viajes; la elección discreta es el tipo de tour. El modelo de elección consiste en 5 alternativas, según la jerarquía de actividades establecida en la tesis: HOME, no realiza viajes durante el día de estudio, HWH tour cuya actividad principal es el trabajo o estudios, y no se realizan paradas intermedias; HWHs tour si el individuo reaiza paradas intermedias; HOH tour cuya actividad principal es distinta a trabajo y estudios, y no se realizan paradas intermedias; HOHs donde se realizan paradas intermedias. Para llegar a la mejor especificación del modelo, se realizó un trabajo importante considerando diferentes estructuras de modelos y tres tipos de estimaciones. De tal manera, se obtuvieron parámetros consistentes y eficientes. Los resultados muestran que la modelización de los tours, representa una ventaja sobre la modelización de los viajes, puesto que supera las limitaciones de espacio y tiempo, enlazando los viajes realizados por la misma persona en el día de estudio. La propensión al viaje (PT) existe y es específica para cada tipo de tour. Los parámetros estimados en el modelo híbrido resultaron significativos y distintos para cada alternativa de tipo de tour. Por último, en la tesis se verifica que los modelos híbridos representan una mejora sobre los modelos tradicionales de elección discreta, dando como resultado parámetros consistentes y más robustos. En cuanto a políticas de transporte, se ha demostrado que los atributos del entorno urbano son más importantes que los LOS (Level of Service) en la generación de tours multi-etapas. la presente tesis representa el primer análisis empírico de la relación entre los tipos de tours y la propensión al viaje. El concepto Propensity to Travel ha sido desarrollado exclusivamente para la tesis. Igualmente, el desarrollo de un modelo conjunto RC-Number of trips basado en tres escalas de medida representa innovación en cuanto a la comparación de las escalas geográficas, que no había sido hecha en la modelización de la self-selection. The relationship between built environment (BE) and travel behaviour (TB) has been studied in a number of cases, using several methods - aggregate and disaggregate approaches - and different focuses – trip frequency, automobile use, and vehicle miles travelled and so on. Definitely, travel is generated by the need to undertake activities and obtain services, and there is a general consensus that urban components affect TB. However researches are still needed to better understand which components of the travel behaviour are affected most and by which of the urban components. In order to fill the gap in the research, the present dissertation faced two main objectives: (1) To contribute to the better understanding of the relationship between travel demand and urban environment. And (2) To develop an econometric model for estimating travel demand with urban environment attributes. With this purpose, the present thesis faced an exhaustive research and computation of land-use variables in order to find the best representation of BE for modelling trip frequency. In particular two empirical analyses are carried out: 1. Estimation of three dimensions of travel demand using dimensions of urban environment. We compare different travel dimensions and geographical scales, and we measure self-selection contribution following the joint models. 2. Develop a hybrid model, integrated latent variable and discrete choice model. The implementation of hybrid models is new in the analysis of land-use and travel behaviour. BE and TB explicitly interact and allow richness information about a specific individual decision process For all empirical analysis is used a data-base from a survey conducted in 2006 and 2007 in Madrid. Spatial attributes describing neighbourhood environment are derived from different data sources: National Institute of Statistics-INE (Administrative: municipality and district) and GIS (circular units). INE provides raw data for such spatial units as: municipality and district. The construction of census units is trivial as the census bureau provides tables that readily define districts and municipalities. The construction of circular units requires us to determine the radius and associate the spatial information to our households. The first empirical part analyzes trip frequency by applying an ordered logit model. In this part is studied the effect of socio-economic, transport and land use characteristics on two travel dimensions: trip frequency and type of tour. In particular the land use is defined in terms of type of neighbourhoods and types of dwellers. Three neighbourhood representations are explored, and described three for constructing neighbourhood attributes. In particular administrative units are examined to represent neighbourhood and circular – unit representation. Ordered logit models are applied, while ordinal logit models are well-known, an intensive work for constructing a spatial attributes was carried out. On the other hand, the second empirical analysis consists of the development of an innovative econometric model that considers a latent variable called “propensity to travel”, and choice model is the choice of type of tour. The first two specifications of ordinal models help to estimate this latent variable. The latent variable is unobserved but the manifestation is called “indicators”, then the probability of choosing an alternative of tour is conditional to the probability of latent variable and type of tour. Since latent variable is unknown we fit the integral over its distribution. Four “sets of best variables” are specified, following the specification obtained from the correlation analysis. The results evidence that the relative importance of SE variables versus BE variables depends on how BE variables are measured. We found that each of these three spatial scales has its intangible qualities and drawbacks. Spatial scales play an important role on predicting travel demand due to the variability in measures at trip origin/destinations within the same administrative unit (municipality, district and so on). Larger units will produce less variation in data; but it does not affect certain variables, such as public transport supply, that are more significant at municipality level. By contrast, land-use measures are more efficient at district level. Self-selection in this context, is weak. Thus, the influence of BE attributes is true. The results of the hybrid model show that unobserved factors affect the choice of tour complexity. The latent variable used in this model is propensity to travel that is explained by socioeconomic aspects and neighbourhood attributes. The results show that neighbourhood attributes have indeed a significant impact on the choice of the type of tours either directly and through the propensity to travel. The propensity to travel has a different impact depending on the structure of each tour and increases the probability of choosing more complex tours, such as tours with many intermediate stops. The integration of choice and latent variable model shows that omitting important perception and attitudes leads to inconsistent estimates. The results also indicate that goodness of fit improves by adding the latent variable in both sequential and simultaneous estimation. There are significant differences in the sensitivity to the latent variable across alternatives. In general, as expected, the hybrid models show a major improvement into the goodness of fit of the model, compared to a classical discrete choice model that does not incorporate latent effects. The integrated model leads to a more detailed analysis of the behavioural process. Summarizing, the effect that built environment characteristics on trip frequency studied is deeply analyzed. In particular we tried to better understand how land use characteristics can be defined and measured and which of these measures do have really an impact on trip frequency. We also tried to test the superiority of HCM on this field. We can concluded that HCM shows a major improvement into the goodness of fit of the model, compared to classical discrete choice model that does not incorporate latent effects. And consequently, the application of HCM shows the importance of LV on the decision of tour complexity. People are more elastic to built environment attributes than level of services. Thus, policy implications must take place to develop more mixed areas, work-places in combination with commercial retails.

Approach to the use of indicators for the assessment of the environmental level of construction products

The European construction industry is supposed to consume the 40% of the natural European resources and to generate the 40% of the European solid waste. Conscious of the great damage being suffered by the environment because of construction activity, this work tries to provide the building actors with a new tool to improve the current situation. The tool proposed is a model for the comprehensive evaluation of construction products by determining their environmental level. In this research, the environmental level of a construction product has been defined as its quality of accomplishing the construction requirements needed by causing the minimum ecological impact in its surrounding environment. This information allows building actors to choose suitable materials for building needs and also for the environment, mainly in the project stage or on the building site, contributing to improve the relationship between buildings and environment. For the assessment of the environmental level of construction products, five indicators have been identified regarding their global environmental impact through the product life cycle: CO2 emissions provoked during their production, volume and toxicity of waste generated on the building site, durability and recycling capacity after their useful life. Therefore, the less environmental impact one construction product produces, the higher environmental level performs. The model has been tested in 30 construction products that include environmental criteria in their description. The results obtained will be discussed in this article. Furthermore, this model can lay down guidelines for the selection of ecoefficient construction products and the design of new eco-competitive and eco-committed ones

Geochemistry and risk assessment of street dust in Luanda, Angola, a tropical urban environment

A total of 92 samples of street dust were collected in Luanda, Angola, were sieved below 100 μm, and analysed by ICP-MS for 35 elements after an aqua-regia digestion. The concentration and spatial heterogeneity of trace elements in the street dust of Luanda are generally lower than in most industrialized cities in the Northern hemisphere. These observations reveal a predominantly “natural” origin for the street dust in Luanda, which is also manifested in that some geochemical processes that occur in natural soils are preserved in street dust: the separation of uranium from thorium, and the retention of the former by carbonate materials, or the high correlation between arsenic and vanadium due to their common mode of adsorption on solid particles in the form of oxyanions. The only distinct anthropogenic fingerprint in the composition of Luanda's street dust is the association Pb–Cd–Sb–Cu (and to a lesser extent, Ba–Cr–Zn). The use of risk assessment strategies has proved helpful in identifying the routes of exposure to street dust and the trace elements therein of most concern in terms of potential adverse health effects. In Luanda the highest levels of risk seem to be associated (a) with the presence of As and Pb in the street dust and (b) with the route of ingestion of dust particles, for all the elements included in the study except Hg, for which inhalation of vapours presents a slightly higher risk than ingestion. However, given the large uncertainties associated with the estimates of toxicity values and exposure factors, and the absence of site-specific biometric factors, these results should be regarded as preliminary and further research should be undertaken before any definite conclusions regarding potential health effects are drawn.

Impact of MOVPE Environment on Silicon Substrates for III-V-on-Si Multijunction Solar Cells

With the final goal of integrating III-V materials to silicon for tandem solar cells, the influence of the metal-organic vapor phase epitaxy (MOVPE) environment on the minority carrier properties of silicon wafers has been evaluated. These properties will essentially determine the photovoltaic performance of the bottom cell in a III-V-on-Si tandem solar cell device. A comparison of the base minority carrier lifetimes obtained for different thermal processes carried out in a MOVPE reactor on Czochralski silicon wafers has been carried out. The effect of the formation of the emitter by phosphorus diffusion has also been evaluated.

Atmospheric modelling of tritium forms transport: review of capabilities and R&D needs for the assessment of fusion facilities environmental impact

One of the key scrutiny issues of new coming energy era would be the environmental impact of fusion facilities managing one kg of tritium. The potential change of committed dose regulatory limits together with the implementation of nuclear design principles (As Low as Reasonably achievable - ALARA -, Defense in Depth -D-i-D-) for fusion facilities could strongly impact on the cost of deployment of coming fusion technology. Accurate modeling of environmental tritium transport forms (HT, HTO) for the assessment of fusion facility dosimetric impact in Accidental case appears as of major interest. This paper considers different short-term releases of tritium forms (HT and HTO) to the atmosphere from a potential fusion reactor located in the Mediterranean Basin. This work models in detail the dispersion of tritium forms and dosimetric impact of selected environmental patterns both inland and in-sea using real topography and forecast meteorological data-fields (ECMWF/FLEXPART). We explore specific values of this ratio in different levels and we examine the influence of meteorological conditions in the HTO behavior for 24 hours. For this purpose we have used a tool which consists on a coupled Lagrangian ECMWF/FLEXPART model useful to follow real time releases of tritium at 10, 30 and 60 meters together with hourly observations of wind (and in some cases precipitations) to provide a short-range approximation of tritium cloud behavior. We have assessed inhalation doses. And also HTO/HT ratios in a representative set of cases during winter 2010 and spring 2011 for the 3 air levels.

Assessment methodology applied to demand measures to change urban mobility behavior

In order to minimize car-based trips, transport planners have been particularly interested in understanding the factors that explain modal choices. Transport modelling literature has been increasingly aware that socioeconomic attributes and quantitative variables are not sufficient to characterize travelers and forecast their travel behavior. Recent studies have also recognized that users’ social interactions and land use patterns influence travel behavior, especially when changes to transport systems are introduced; but links between international and Spanish perspectives are rarely dealt with. The overall objective of the thesis is to develop a stepped methodology that integrate diverse perspectives to evaluate the willingness to change patterns of urban mobility in Madrid, based on four steps: (1st) analysis of causal relationships between both objective and subjective personal variables, and travel behavior to capture pro-car and pro-public transport intentions; (2nd) exploring the potential influence of individual trip characteristics and social influence variables on transport mode choice; (3rd) identifying built environment dimensions on travel behavior; and (4th) exploring the potential influence on transport mode choice of extrinsic characteristics of individual trip using panel data, land use variables using spatial characteristics and social influence variables. The data used for this thesis have been collected from a two panel smartphone-based survey (n=255 and 190 respondents, respectively) carried out in Madrid. Although the steps above are mainly methodological, the application to the area of Madrid allows deriving important results that can be directly used to forecast travel demand and to evaluate the benefits of specific policies that might be implemented in the area. The results demonstrated, respectively: (1st) transport policy actions are more likely to be effective when pro-car intention has been disrupted first; (2nd) the consideration of “helped” and “voluntary” users as tested here could have a positive and negative impact, respectively, on the use of public transport; (3rd) the importance of density, design, diversity and accessibility underlying dimensions responsible for land use variables; and (4th) there are clearly different types of combinations of social interactions, land use and time frame on travel behavior studies. Finally, with the objective to study the impact of demand measures to change urban mobility behavior, those previous results have been considered in a unique way, a hybrid discrete choice model has been used on a 5th step. Then it can be concluded that urban mobility behavior is not only ruled by the maximum utility criterion, but also by a strong psychological-environment concept, developed without the mediation of cognitive processes during choice, i.e., many people using public transport on their way to work do not do it for utilitarian reasons, but because no other choice is available. Regarding built environment dimensions, the more diversity place of residence, the more difficult the use of public transport or walking.

The impact of institutional environment and cultural context in the four different approaches to social enterprise

This article analyzes the characteristics of four different social enterprise schools of though (social economy, earned-income school in developed countries, earned-income in emerging countries, and social innovation) and the influence of the contextual elements (cultural, political, economic and social) on their configuration. This article draws on the qualitative discussions of social enterprise in different regions of the world. This paper is intended to contribute to the field of social enterprise by broadening the understanding of the influence of environment and institutions on the emergence of social enterprise.

Impact of metal-organic vapor phase epitaxy environment on silicon bulk lifetime for III–V-on-Si multijunction solar cells

With the final goal of integrating III-V materials on silicon substrates for tandem solar cells, the influence of the Metal-Organic Vapor Phase Epitaxy (MOVPE) environment on the minority carrier properties of silicon wafers has been evaluated. These properties will essentially determine the photovoltaic performance of the bottom cell in a III-V-on-Si tandem solar cell. A comparison of the base minority carrier lifetimes obtained for different thermal processes carried out in a MOVPE reactor on Czochralski silicon wafers has been carried out. An important degradation of minority carrier lifetime during the surface preparation (i.e. H2 anneal) has been observed. Three different mechanisms have been proposed for explaining this behavior: 1) the introduction of extrinsic impurities coming from the reactor; 2) the activation of intrinsic lifetime killing impurities coming from the wafer itself; and finally, 3) the formation of crystal defects, which eventually become recombination centers. The effect of the emitter formation by phosphorus diffusion has also been evaluated. In this sense, it has been reported that lifetime can be recovered during the emitter formation either by the effect of the P on extracting impurities, or by the role of the atomic hydrogen on passivating the defects.

Comparative Life Cycle Assessment of the Conventional Façade SOS Natura and the Natural Water Tank Façade

The construction industry produces great environmental impacts to the planet. In order to tackle this problem, the European Union has put into effect Regulation No 305/2011, which compels the construction products manufacturers to carry out environmental performance studies of these products and thus make public the impact they cause on the environment. The aim of this research is to make known the environmental impacts of the SOS Natura Conventional Façade (CF) solution, obtained within the research project "SOS Natura, Vegetal Architectural Solutions" developed by the Department of Construction and Technology in Architecture of the School of Architecture of the Technical University of Madrid (Spain). In addition, we report an environmental comparative with the Natural Water Tank Façade (NWTF), studied previously by the same work group and included in the same research project.We present as well an uncertainty analysis for both façades. Following the study conducted we conclude that the NWTF profile has a slightly better environmental behaviour when compared to the CF profile for the entire life cycle in most of the impact categories analysed in this study. However it should also be noted that, in detail and at stage level, the NWTF presents a higher environmental impact than the CF.

Determinants and impact of suboptimal asthma control in Europe : The INTERNATIONAL CROSS-SECTIONAL AND LONGITUDINAL ASSESSMENT ON ASTHMA CONTROL (LIAISON) study

Acknowledgements We are grateful to THERAmetrics for the study management, data collection and analysis. The authors would like to thank the following investigators for their contribution (>30 patients enrolled): F. Fohler, A.G. Haider, J. Hesse-Tonsa, J. Messner, W. Pohl (Austria); G. Joos, J.L. Halloy, R. Peche, H. Simonis, P. Van den Brande (Belgium); B. Bugnas, J.M. Chavaillon, P. Debove, S. Dury, L. Mathieu, O. Lagrange, A. Prudhomme, S. Verdier (France); A. Benedix, O. Kestermann, A. Deimling, G. Eckhardt, M. Gernhold, V. Grimm-Sachs, M. Hoefer, G. Hoheisel, C. Stolpe, C. Schilder, M. John, J. Uerscheln, K.H. Zeisler (Germany); A. Chaniotou, P. Demertzis, V. Filaditaki-Loverdou, A. Gaga, E. Georgatou-Papageorgiou, S. Michailidis, G. Pavkalou, M. Toumpis (Greece); K. Csicsari, K. Hajdu, M. Póczi, M. Kukuly, T. Kecskes, C. Hangonyi, J. Schlezak, E. Takács, M. Szabo,G. Szabó, C. Szabo (Hungary); G.W. Canonica, W. Castellani, A. Cirillo, M.P. Foschino Barbaro, M. Gjomarkaj, G. Guerra, G. Idotta, D. Legnani, M. Lo Schiavo, R. Maselli, F. Mazza, S. Nutini, P. Paggiaro, A. Pietra, O. Resta, S. Salis, N.A. Scichilone, M.C. Zappa, A. Zedda (Italy); M. Goosens, R. Heller, K. Mansour, C. Meek, J. van den Berg (The Netherlands); A. Antczak, M. Faber, D. Madra-Rogacka, G. Mincewicz, M. Michnar, D. Olejniczak, G. Pulka, Z. Sankowski, K. Kowal, I. Krupa-Borek, B. Kubicka Kozik, K. Kuczynska, P. Kuna, A. Kwasniewski, M. Wozniak (Poland); F. Casas Maldonado, C. Cisneros, J. de Miguel Díez, L.M. Entrenas Costa, B. Garcìa-Cosio, M.V. Gonzales, L. Lores, M. Luengo, C. Martinez, C. Melero, I. Mir, X. Munoz, A. Pacheco, V. Plaza, J. Serra, J. Serrano, J.G. Soto Campos (Spain); T. Bekci, R. Demir, N. Dursunoglu, D. Ediger, A. Ekici, O. Goksel, H. Gunen, I.K. Oguzulgen, Z.F. Ozseker, (Turkey); L. Barnes, T. Hall, S. Montgomerie, J. Purohit, J. Ryan (United Kingdom). The authors would also like to thank P. Galletti (THERAMetrics S.p.A., Sesto San Giovanni, Italy) and K. Stockmeyer (THERAMetrics GmbH, Essen, Germany) for providing editorial assistance in the preparation of this manuscript. Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.